This patch make changes to use linetime latency if allocated
DDB size during plane watermark calculation is not available.
linetime is the time, display engine takes to fetch one line worth of
pixels with given pixel clock rate.
This is required to implement new DDB allocation algorithm.

In New Algorithm DDB is allocated based on WM values, because of which
number of DDB blocks will not be available during WM calculation,
So this "linetime latency" is suggested by SV/HW team to be used during
switch-case for WM blocks selection.
linetime latency us = pipe horizontal total pixels/adjusted pixel rate MHz

Changes since v1:
 - Rebase on top of Paulo's patch series
Changes since v2:
 - Fix if-else condition (pointed by Maarten)
Changes since v3:
 - Use common function for timetime_us calculation (Paulo)
 - rebase on drm-tip
Changes since v4:
 - Use consistent name for fixed_point operation
Changes since v5:
 - Improve commit message
 - rename skl_get_linetime_us to intel_get_linetime_us
 - fix watermark result selection (Matt)
Signed-off-by: N"Mahesh Kumar" <mahesh1.kumar@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517115831.13830-11-mahesh1.kumar@intel.com

Instead of iterating over planes & wm levels in a single function use
skl_compute_wm_level function to interate over WM levels.
Change name of function to skl_compute_wm_levels (Matt).

These changes are to clean-up WM code & will help in making only new
ddb algorithm related changes in later patch in series.
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517115831.13830-10-mahesh1.kumar@intel.com

This patch cleanup/reorganises the watermark calculation functions.
This patch make use of already available macro
"drm_atomic_crtc_state_for_each_plane_state" to walk through
plane_state list instead of calculating plane_state in function itself.

This restructuring will help later patch for new DDB allocation
algorithm to do only algo related changes.

Changes from V1:
 - split the patch in two parts as per Matt's comment
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517115831.13830-9-mahesh1.kumar@intel.com

DDB minimum requirement of crtc configuration (cumulative of all the
enabled planes in crtc) may exceed the allocated DDB for crtc/pipe.
This patch make changes to fail the flip/ioctl if minimum requirement
for pipe exceeds the total ddb allocated to the pipe.
Previously it succeeded but making alloc_size a negative value. Which
will make subsequent calculations for plane ddb allocation bogus & may
lead to screen corruption or system hang.

Changes from V1:
 - Improve commit message as per Ander's comment
 - Remove extra parentheses (Ander)
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517115831.13830-8-mahesh1.kumar@intel.com

We are already doing memset of ddb structure at the begining of skl_allocate_pipe_ddb
function, No need to again do a memset.
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517115831.13830-7-mahesh1.kumar@intel.com

Fail the flip if no FB is present but plane_state is set as visible.
Above is not a valid combination so instead of continue fail the flip.
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517115831.13830-6-mahesh1.kumar@intel.com

This patch make changes to calculate adjusted plane pixel rate &
plane downscale amount using fixed_point functions available.
This patch will give uniformity in code, & will help to avoid mixing of
32bit uint32_t variable for fixed-16.16 with fixed_16_16_t variables in
later patch in the series.

Changes from V1:
 - Rebase based on wrapper name change
 - Remove unnecessary comment
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517115831.13830-5-mahesh1.kumar@intel.com

Don't use fixed_16_16 structure members directly, instead use wrapper to
perform fixed_16_16 division operation.
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517115831.13830-4-mahesh1.kumar@intel.com

This patch adds few wrapper to perform fixed_point_16_16 operations
mul_round_up_u32_fixed16 : Multiplies u32 and fixed_16_16_t variables
			   & returns u32 result with rounding-up.
mul_fixed16 : Multiplies two fixed_16_16_t variable & returns fixed_16_16
div_round_up_fixed16 : Perform division operation on fixed_16_16_t
		       variables & return u32 result with round-off
div_round_up_u32_fixed16 : devide uint32_t variable by fixed_16_16 variable
			   and round_up the result to uint32_t.

These wrappers will be used by later patches in the series.

Changes from V1:
 - Rename wrapper as per Matt's comment
Changes from V2:
 - Fix indentation
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517115831.13830-3-mahesh1.kumar@intel.com

fixed_16_16_div_round_up(_u64), wrapper for fixed_16_16 division
operation don't really round_up the result. Wrapper round_up only the
fraction part of the result to make it 16-bit.
This patch eliminates round_up keyword from the wrapper.

Later patch will introduce the new wrapper to do rounding-off the result
and give unt32_t output to cleanup mix use of fixed_16_16_t & uint32_t
variables.
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517115831.13830-2-mahesh1.kumar@intel.com

Since we coordinate with the execlists tasklet using a locked schedule
operation that ensures that after we set the engine->irq_posted we
always have an invocation of the tasklet, we do not need to use a locked
operation to set the engine->irq_posted itself.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-12-chris@chris-wilson.co.uk

As the handler is now quite complex, involving a few atomics, the cost
of the function preamble is negligible in comparison and so we should
leave the function out-of-line for better I$.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-11-chris@chris-wilson.co.uk

If we do not require to perform priority bumping, and we haven't yet
submitted the request, we can update its priority in situ and skip
acquiring the engine locks -- thus avoiding any contention between us
and submit/execute.

v2: Remove the stack element from the list if we can do the early
assignment.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-10-chris@chris-wilson.co.uk

The i915_priolist are allocated within an atomic context on a path where
we wish to minimise latency. If we use a dedicated kmem_cache, we have
the advantage of a local freelist from which to service new requests
that should keep the latency impact of an allocation small. Though
currently we expect the majority of requests to be at default priority
(and so hit the preallocate priolist), once userspace starts using
priorities they are likely to use many fine grained policies improving
the utilisation of a private slab.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-9-chris@chris-wilson.co.uk

All the requests at the same priority are executed in FIFO order. They
do not need to be stored in the rbtree themselves, as they are a simple
list within a level. If we move the requests at one priority into a list,
we can then reduce the rbtree to the set of priorities. This should keep
the height of the rbtree small, as the number of active priorities can not
exceed the number of active requests and should be typically only a few.

Currently, we have ~2k possible different priority levels, that may
increase to allow even more fine grained selection. Allocating those in
advance seems a waste (and may be impossible), so we opt for allocating
upon first use, and freeing after its requests are depleted. To avoid
the possibility of an allocation failure causing us to lose a request,
we preallocate the default priority (0) and bump any request to that
priority if we fail to allocate it the appropriate plist. Having a
request (that is ready to run, so not leading to corruption) execute
out-of-order is better than leaking the request (and its dependency
tree) entirely.

There should be a benefit to reducing execlists_dequeue() to principally
using a simple list (and reducing the frequency of both rbtree iteration
and balancing on erase) but for typical workloads, request coalescing
should be small enough that we don't notice any change. The main gain is
from improving PI calls to schedule, and the explicit list within a
level should make request unwinding simpler (we just need to insert at
the head of the list rather than the tail and not have to make the
rbtree search more complicated).

v2: Avoid use-after-free when deleting a depleted priolist

v3: Michał found the solution to handling the allocation failure
gracefully. If we disable all priority scheduling following the
allocation failure, those requests will be executed in fifo and we will
ensure that this request and its dependencies are in strict fifo (even
when it doesn't realise it is only a single list). Normal scheduling is
restored once we know the device is idle, until the next failure!
Suggested-by: NMichał Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-8-chris@chris-wilson.co.uk

Explicitly assign the default priority, and give it a name. After much
discussion, we have chosen to call it I915_PRIORITY_NORMAL!
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-7-chris@chris-wilson.co.uk

If we *know* that the engine is idle, i.e. we have not more contexts in
flight, we can skip any spurious CSB idle interrupts. These spurious
interrupts seem to arrive long after we assert that the engines are
completely idle, triggering later assertions:

[  178.896646] intel_engine_is_idle(bcs): interrupt not handled, irq_posted=2
[  178.896655] ------------[ cut here ]------------
[  178.896658] kernel BUG at drivers/gpu/drm/i915/intel_engine_cs.c:226!
[  178.896661] invalid opcode: 0000 [#1] SMP
[  178.896663] Modules linked in: i915(E) x86_pkg_temp_thermal(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) ghash_clmulni_intel(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) intel_gtt(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) aesni_intel(E) prime_numbers(E) evdev(E) aes_x86_64(E) drm(E) crypto_simd(E) cryptd(E) glue_helper(E) mei_me(E) mei(E) lpc_ich(E) efivars(E) mfd_core(E) battery(E) video(E) acpi_pad(E) button(E) tpm_tis(E) tpm_tis_core(E) tpm(E) autofs4(E) i2c_i801(E) fan(E) thermal(E) i2c_designware_platform(E) i2c_designware_core(E)
[  178.896694] CPU: 1 PID: 522 Comm: gem_exec_whispe Tainted: G            E   4.11.0-rc5+ #14
[  178.896702] task: ffff88040aba8d40 task.stack: ffffc900003f0000
[  178.896722] RIP: 0010:intel_engine_init_global_seqno+0x1db/0x1f0 [i915]
[  178.896725] RSP: 0018:ffffc900003f3ab0 EFLAGS: 00010246
[  178.896728] RAX: 0000000000000000 RBX: ffff88040af54000 RCX: 0000000000000000
[  178.896731] RDX: ffff88041ec933e0 RSI: ffff88041ec8cc48 RDI: ffff88041ec8cc48
[  178.896734] RBP: ffffc900003f3ac8 R08: 0000000000000000 R09: 000000000000047d
[  178.896736] R10: 0000000000000040 R11: ffff88040b344f80 R12: 0000000000000000
[  178.896739] R13: ffff88040bce0000 R14: ffff88040bce52d8 R15: ffff88040bce0000
[  178.896742] FS:  00007f2cccc2d8c0(0000) GS:ffff88041ec80000(0000) knlGS:0000000000000000
[  178.896746] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  178.896749] CR2: 00007f41ddd8f000 CR3: 000000040bb03000 CR4: 00000000001406e0
[  178.896752] Call Trace:
[  178.896768]  reset_all_global_seqno.part.33+0x4e/0xd0 [i915]
[  178.896782]  i915_gem_request_alloc+0x304/0x330 [i915]
[  178.896795]  i915_gem_do_execbuffer+0x8a1/0x17d0 [i915]
[  178.896799]  ? remove_wait_queue+0x48/0x50
[  178.896812]  ? i915_wait_request+0x300/0x590 [i915]
[  178.896816]  ? wake_up_q+0x70/0x70
[  178.896819]  ? refcount_dec_and_test+0x11/0x20
[  178.896823]  ? reservation_object_add_excl_fence+0xa5/0x100
[  178.896835]  i915_gem_execbuffer2+0xab/0x1f0 [i915]
[  178.896844]  drm_ioctl+0x1e6/0x460 [drm]
[  178.896858]  ? i915_gem_execbuffer+0x260/0x260 [i915]
[  178.896862]  ? dput+0xcf/0x250
[  178.896866]  ? full_proxy_release+0x66/0x80
[  178.896869]  ? mntput+0x1f/0x30
[  178.896872]  do_vfs_ioctl+0x8f/0x5b0
[  178.896875]  ? ____fput+0x9/0x10
[  178.896878]  ? task_work_run+0x80/0xa0
[  178.896881]  SyS_ioctl+0x3c/0x70
[  178.896885]  entry_SYSCALL_64_fastpath+0x17/0x98
[  178.896888] RIP: 0033:0x7f2ccb455ca7
[  178.896890] RSP: 002b:00007ffcabec72d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  178.896894] RAX: ffffffffffffffda RBX: 000055f897a44b90 RCX: 00007f2ccb455ca7
[  178.896897] RDX: 00007ffcabec74a0 RSI: 0000000040406469 RDI: 0000000000000003
[  178.896900] RBP: 00007f2ccb70a440 R08: 00007f2ccb70d0a4 R09: 0000000000000000
[  178.896903] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[  178.896905] R13: 000055f89782d71a R14: 00007ffcabecf838 R15: 0000000000000003
[  178.896908] Code: 00 31 d2 4c 89 ef 8d 70 48 41 ff 95 f8 06 00 00 e9 68 fe ff ff be 0f 00 00 00 48 c7 c7 48 dc 37 a0 e8 fa 33 d6 e0 e9 0b ff ff ff <0f> 0b 0f 0b 0f 0b 0f 0b 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00

On the other hand, by ignoring the interrupt do we risk running out of
space in CSB ring? Testing for a few hours suggests not, i.e. that we
only seem to get the odd delayed CSB idle notification.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-6-chris@chris-wilson.co.uk

add/remove: 1/1 grow/shrink: 5/4 up/down: 391/-578 (-187)
function                                     old     new   delta
execlists_submit_ports                       262     471    +209
port_assign.isra                               -     136    +136
capture                                     6344    6359     +15
reset_common_ring                            438     452     +14
execlists_submit_request                     228     238     +10
gen8_init_common_ring                        334     341      +7
intel_engine_is_idle                         106     105      -1
i915_engine_info                            2314    2290     -24
__i915_gem_set_wedged_BKL                    485     411     -74
intel_lrc_irq_handler                       1789    1604    -185
execlists_update_context                     294       -    -294

The most important change there is the improve to the
intel_lrc_irq_handler and excclist_submit_ports (net improvement since
execlists_update_context is now inlined).

v2: Use the port_api() for guc as well (even though currently we do not
pack any counters in there, yet) and hide all port->request_count inside
the helpers.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-5-chris@chris-wilson.co.uk

Rebrand the current (pointer | bits) pack/unpack utility macros as
explicit bit twiddling for PAGE_SIZE so that we can use the more
flexible underlying macros for different bits.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-4-chris@chris-wilson.co.uk

ptr_unpack_bits() is a function-like macro, as such it is meant to be
replaceable by a function. In this case, we should be passing in the
out-param as a pointer.

Bizarrely this does affect code generation:

function                                     old     new   delta
i915_gem_object_pin_map                      409     389     -20

An improvement(?) in this case, but one can't help wonder what
strict-aliasing optimisations we are preventing.

The generated code looks identical in using ptr_unpack_bits (no extra
motions to stack, the pointer and bits appear to be kept in registers),
the difference appears to be code ordering and with a reorder it is able
to use smaller forward jumps.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-3-chris@chris-wilson.co.uk

A long time ago, I wrote some selftests for the struct kfence idea. Now
that we have infrastructure in i915/igt for running kselftests, include
some for i915_sw_fence.

v2: INIT_WORK_ONSTACK/destroy_work_on_stack (Mika)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-2-chris@chris-wilson.co.uk

My original intention was for i915_sw_fence to be the base class and
provide the reference count for the container. This was from starting
with a design to handle async_work. In practice, for i915 we embed
fences into structs which have their own independent reference counting,
making the i915_sw_fence.kref duplicitous. If we remove the kref, we
remove the i915_sw_fence's ability to free itself and its independence,
it can only exist within a container and must be supplied with a
callback to handle its release.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517121007.27224-1-chris@chris-wilson.co.uk

This basically reverts commit 465418c6
("drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7")
with small addition - marking it as affecting GLK as well.

It was incorrectly considered fixed in production steppings.

References: HSD#2126385, HSD#2131381, HSDES#1504433555, BSID#0764
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: NArkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
[Mika: s/KBL/GLK on commit message]
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170512112015.19082-1-arkadiusz.hiler@intel.com

For the aliasing ppgtt we clear the va range up to vma->size, but seem
to allocate up to vma->node.size, which is a little inconsistent given
that vma->node.size >= vma->size. Not that is really matters all that
much since we preallocate anyway, but for consistency just use
vma->size.

Fixes: ff685975 ("drm/i915: Move allocate_va_range to GTT")
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170516085514.5853-1-matthew.auld@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Simplify logic to avoid unnecessary variable declaration and assignment.
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515220028.GA15149@embeddedgus

Local variable has_reduced_clock is assigned to a constant value and it is
never updated again. Remove this variable and the dead code it guards.

Addresses-Coverity-ID: 1362230
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515215605.GA14963@embeddedgus

Trivial fix to spelling mistake in seq_printf message.

Fixes: a8b9370f ("drm/i915/guc: Dump the GuC stage descriptor pool in debugfs")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170516092235.28640-1-colin.king@canonical.com

As per BSPEC, high/low switch count to be programmed in
terms of byteclock using exit_zero_count and prep_count.
For Geminilake exit/prep counts are already calculated
in terms of byteclock. This patch calculates high/low
switch count using counts value in byteclock, old calculation
leads to screen flicker/shift issue while resuming from S3/S4.
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1494336565-19185-1-git-send-email-madhav.chauhan@intel.com

Some 64b divides snuck in when doing the prng timing compensation.

Fixes: 47979480 ("drm/i915: Squash repeated awaits on the same fence")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170513094154.3581-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This change is pre-emptively aiming to avoid a potential cause of kernel
logging noise in case some condition were to result in us seeing invalid
OA reports.

The workaround for the OA unit's tail pointer race condition is what
avoids the primary known cause of invalid reports being seen and with
that in place we aren't expecting to see this notice but it can't be
entirely ruled out.

Just in case some condition does lead to the notice then it's likely
that it will be triggered repeatedly while attempting to append a
sequence of reports and depending on the configured OA sampling
frequency that might be a large number of repeat notices.

v2: (Chris) avoid inconsistent warning on throttle with
    printk_ratelimit()
v3: (Matt) init and summarise with stream init/close not driver init/fini
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-9-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This updates the tail pointer race workaround handling to updating the
'aged' pointer before looking to start aging a new one. There's the
possibility that there is already new data available and so we can
immediately start aging a new pointer without having to first wait for a
later hrtimer callback (and then another to age).
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-8-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

A minor improvement to debugging output
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-7-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

There's a HW race condition between OA unit tail pointer register
updates and writes to memory whereby the tail pointer can sometimes get
ahead of what's been written out to the OA buffer so far (in terms of
what's visible to the CPU).

Although this can be observed explicitly while copying reports to
userspace by checking for a zeroed report-id field in tail reports, we
want to account for this earlier, as part of the _oa_buffer_check to
avoid lots of redundant read() attempts.

Previously the driver used to define an effective tail pointer that
lagged the real pointer by a 'tail margin' measured in bytes derived
from OA_TAIL_MARGIN_NSEC and the configured sampling frequency.
Unfortunately this was flawed considering that the OA unit may also
automatically generate non-periodic reports (such as on context switch)
or the OA unit may be enabled without any periodic sampling.

This improves how we define a tail pointer for reading that lags the
real tail pointer by at least %OA_TAIL_MARGIN_NSEC nanoseconds, which
gives enough time for the corresponding reports to become visible to the
CPU.

The driver now maintains two tail pointers:
 1) An 'aging' tail with an associated timestamp that is tracked until we
    can trust the corresponding data is visible to the CPU; at which point
    it is considered 'aged'.
 2) An 'aged' tail that can be used for read()ing.

The two separate pointers let us decouple read()s from tail pointer aging.

The tail pointers are checked and updated at a limited rate within a
hrtimer callback (the same callback that is used for delivering POLLIN
events) and since we're now measuring the wall clock time elapsed since
a given tail pointer was read the mechanism no longer cares about
the OA unit's periodic sampling frequency.

The natural place to handle the tail pointer updates was in
gen7_oa_buffer_is_empty() which is called as part of blocking reads and
the hrtimer callback used for polling, and so this was renamed to
oa_buffer_check() considering the added side effect while checking
whether the buffer contains data.
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-6-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This avoids redundantly passing an (inout) head and tail pointer to
gen7_append_oa_reports() from gen7_oa_read which doesn't need to
reference either itself.

Moving the head/tail reads and writes into gen7_append_oa_reports should
have no functional effect except to avoid some redundant head pointer
writes in cases where nothing was copied to userspace.

This is a stepping stone towards updating how the head and tail pointer
state is managed to improve the workaround for the OA unit's tail
pointer race. It reduces the number of places we need to read/write the
head and tail pointers.
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-5-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

There's no need for the driver to keep reading back the head pointer
from hardware since the hardware doesn't update it automatically. This
way we can treat any invalid head pointer value as a software/driver
bug instead of spurious hardware behaviour.

This change is also a small stepping stone towards re-working how
the head and tail state is managed as part of an improved workaround
for the tail register race condition.
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-4-lionel.g.landwerlin@intel.com

If the function for checking whether there is OA buffer data available
(during a poll or blocking read) has false positives then we want to
avoid a situation where the subsequent read() returns EAGAIN (after
a more accurate check) followed by a poll() immediately reporting
the same false positive POLLIN event and effectively maintaining a
busy loop until there really is data.

This makes sure that we clear the .pollin event status whenever we
return EAGAIN to userspace which will throttle subsequent POLLIN events
and repeated attempts to read to the 5ms intervals of the hrtimer
callback we have.
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-3-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

If I'm going to complain about a back-to-front convention then the least
I can do is not muddle the comment up too.
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-2-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Some panel will default to zero brightness when turning the
panel off and on again. This patch restores last brightness
level back when panel is turning back on.
Signed-off-by: NPuthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511230225.142870-8-puthik@chromium.org

We should set backlight mode register before set register to
enable the backlight.
Signed-off-by: NPuthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511230225.142870-6-puthik@chromium.org