- 19 4月, 2008 30 次提交
-
-
由 Adrian Bunk 提交于
Every file should include the headers containing the externs for its global functions. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Adrian Bunk 提交于
This patch adds proper prototypes for mmc_attach_*() in drivers/mmc/core/core.h Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global __mmc_release_bus() static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Pierre Ossman 提交于
The quirk was meant to just inhibit some resets, but ended up blocking all of them. Fortunately, this was just what was needed. Change the comment to reflect reality. Also, this issue has just been observed on Samsung laptops, so reduce the number of chips the quirk affects. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Jarkko Lavinen 提交于
The limit was a fixed 100k limit in the busy loop, which is not accurate. It would better to have time limit for the worst case which occurs when sending 80 cycles at 400 kHz and takes about 200 microseconds, so limit the max time spend in the busy loop for some 250 microseconds. Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Jarkko Lavinen 提交于
Use work queues for starting new commands instead of starting them directly from irq handler. The command scheduling needs to be delayed a bit for some cards which should not be done from an interrupt. Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Jarkko Lavinen 提交于
MMCA spec says the mmc clock should be kept running for at least 8 cycles after the last RW request. Ensure this with lazy clock disable after a request, or with an explicit delay before switching a slot. Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Jarkko Lavinen 提交于
Abort failed command from workqueue rather than from an interrupt, allowing longer delays in abortion. Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Jarkko Lavinen 提交于
The cover waitqueue is occasionally scheduled twice from timer and the interrupt and oops follows. It would have been possible to fix this problem with spinlocks but using tasklet was a dropin solution with no need for locking. This path also adds some cleanups. Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Kyungmin Park 提交于
If the get_cover_state is not set, it occurs the oops. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Carlos Eduardo Aguiar 提交于
Using setup_timer() instead of init_timer() on omap.c file. Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Jarkko Lavinen 提交于
When a card is removed while it is being accessed, a command can get stuck so that no timeout or end of command interrupt ever occurs. The command getting stuck is almost always CDM12, but also the other commands can get stuck. Catch a stuck command with a timer and try sending the initialization stream until the controller starts running again and responds with the end of command status. Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Juha Yrjola 提交于
General code cleanup, modifications at some dev_* functions and other hacks at mmc_omap_irq() for MMC multislot support. Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Juha Yrjola 提交于
Modifications at power functions to MMC multislot support. This patch also move board-specific code out of MMC OMAP driver. Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Juha Yrjola 提交于
Fix the data timeout calculation for MMC multislot support. Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Juha Yrjola 提交于
New functions to support MMC multislot: mmc_omap_release_dma() and mmc_omap_abort_xfer(). Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Juha Yrjola 提交于
This patch adds back MMC cover switch support in a way that supports multiple slots. Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Juha Yrjola 提交于
Introduce new MMC multislot structure and change driver to use it. Note that MMC clocking is now enabled in mmc_omap_select_slot() and disabled in mmc_omap_release_slot(). Signed-off-by: NJuha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: NJarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Tony Lindgren 提交于
This patch removes the MMC cover switch handling temporarily to make following multislot patches cleaner. MMC cover switch handling will be added back in later patches after adding basic multislot support. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Francisco Alecrim 提交于
According with commit 255d01af from Linux-OMAP tree, the BYTEBLOCK capability was removed by Pierre Ossman. MMC_CAP_BYTEBLOCK is not defined causing the compile error: drivers/mmc/host/omap.c: In function `mmc_omap_probe': drivers/mmc/host/omap.c:1077: error: `MMC_CAP_BYTEBLOCK' undeclared (first use in this function) drivers/mmc/host/omap.c:1077: error: (Each undeclared identifier is reported only once drivers/mmc/host/omap.c:1077: error: for each function it appears in.) Signed-off-by: NFrancisco Alecrim <francisco.alecrim@indt.org.br> Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Tony Lindgren 提交于
As noted by Kyungmin Park, the divisor calculation has an unnecessary increase. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Carlos Eduardo Aguiar 提交于
This patch removes some opcodes from host driver so there's no need on putting '#include <linux/mmc/mmc.h>', that should not be needed in host drivers. Signed-off-by: NCarlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Pierre Ossman 提交于
Hook up the controller LED to the LED subsystem, allowing more flexible control than simply indicating an ongoing request. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Pierre Ossman 提交于
Remove the use of the sdhci specific device name and use the mmc controller name instead. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Pierre Ossman 提交于
Reorganise code so that mmc_hostname() works directly after allocation. That way host drivers can use that name for resource allocations and messages during probing. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (64 commits) ocfs2/net: Add debug interface to o2net ocfs2: Only build ocfs2/dlm with the o2cb stack module ocfs2/cluster: Get rid of arguments to the timeout routines ocfs2: Put tree in MAINTAINERS ocfs2: Use BUG_ON ocfs2: Convert ocfs2 over to unlocked_ioctl ocfs2: Improve rename locking fs/ocfs2/aops.c: test for IS_ERR rather than 0 ocfs2: Add inode stealing for ocfs2_reserve_new_inode ocfs2: Add ac_alloc_slot in ocfs2_alloc_context ocfs2: Add a new parameter for ocfs2_reserve_suballoc_bits ocfs2: Enable cross extent block merge. ocfs2: Add support for cross extent block ocfs2: Move /sys/o2cb to /sys/fs/o2cb sysfs: Allow removal of symlinks in the sysfs root ocfs2: Reconnect after idle time out. ocfs2/dlm: Cleanup lockres print ocfs2/dlm: Fix lockname in lockres print function ocfs2/dlm: Move dlm_print_one_mle() from dlmmaster.c to dlmdebug.c ocfs2/dlm: Dumps the purgelist into a debugfs file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (49 commits) [GFS2] fix assertion in log_refund() [GFS2] fix GFP_KERNEL misuses [GFS2] test for IS_ERR rather than 0 [GFS2] Invalidate cache at correct point [GFS2] fs/gfs2/recovery.c: suppress warnings [GFS2] Faster gfs2_bitfit algorithm [GFS2] Streamline quota lock/check for no-quota case [GFS2] Remove drop of module ref where not needed [GFS2] gfs2_adjust_quota has broken unstuffing code [GFS2] possible null pointer dereference fixup [GFS2] Need to ensure that sector_t is 64bits for GFS2 [GFS2] re-support special inode [GFS2] remove gfs2_dev_iops [GFS2] fix file_system_type leak on gfs2meta mount [GFS2] Allow bmap to allocate extents [GFS2] Fix a page lock / glock deadlock [GFS2] proper extern for gfs2/locking/dlm/mount.c:gdlm_ops [GFS2] gfs2/ops_file.c should #include "ops_inode.h" [GFS2] be*_add_cpu conversion [GFS2] Fix bug where we called drop_bh incorrectly ...
-
由 Harvey Harrison 提交于
TF_MASK is no longer defined, use X86_EFLAGS_TF. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits) [IA64] kdump: Add crash_save_vmcoreinfo for INIT [IA64] Fix NUMA configuration issue [IA64] Itanium Spec updates [IA64] Untangle sync_icache_dcache() page size determination [IA64] arch/ia64/kernel/: use time_* macros [IA64] remove redundant display of free swap space in show_mem() [IA64] make IOMMU respect the segment boundary limits [IA64] kprobes: kprobe-booster for ia64 [IA64] fix getpid and set_tid_address fast system calls for pid namespaces [IA64] Replace explicit jiffies tests with time_* macros. [IA64] use goto to jump out do/while_each_thread [IA64] Fix unlock ordering in smp_callin [IA64] pgd_offset() constfication. [IA64] kdump: crash.c coding style fix [IA64] kdump: add kdump_on_fatal_mca [IA64] Minimize per_cpu reservations. [IA64] Correct pernodesize calculation. [IA64] Kernel parameter for max number of concurrent global TLB purges [IA64] Multiple outstanding ptc.g instruction support [IA64] Implement smp_call_function_mask for ia64 ...
-
- 18 4月, 2008 10 次提交
-
-
由 Sunil Mushran 提交于
This patch exposes o2net information via debugfs. The information includes the list of sockets (sock_containers) as well as the list of outstanding messages (send_tracking). Useful for o2dlm debugging. (This patch is derived from an earlier one written by Zach Brown that exposed the same information via /proc.) [Mark: checkpatch fixes] Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Reviewed-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Mark Fasheh 提交于
fs/ocfs2/dlm/ocfs2_dlm.ko and fs/ocfs2/dlm/ocfs2_dlmfs.ko get built if CONFIG_FS_OCFS2 is specified. This isn't quite how it should happen any more - the "o2cb" dlm modules should only be built if CONFIG_FS_OCFS2_O2CB is set, so update the dlm Makefile accordingly. Signed-off-by: NMark Fasheh <mfasheh@suse.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NJoel Becker <joel.becker@oracle.com>
-
由 Jeff Mahoney 提交于
We keep seeing bug reports related to NULL pointer derefs in o2net_set_nn_state(). When I originally wrote up the configurable timeout patch, I had tried to plan for multiple clusters. This was silly. The timeout routines all use o2nm_single_cluster so there's no point in passing an argument at all. This patch removes the arguments and kills those bugs dead. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Joel Becker 提交于
The ocfs2 MAINTAINERS entry should have the git tree URL. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Julia Lawall 提交于
if (...) BUG(); should be replaced with BUG_ON(...) when the test has no side-effects to allow a definition of BUG_ON that drops the code completely. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ disable unlikely @ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (unlikely(E)) { BUG(); } + BUG_ON(E); ) @@ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (E) { BUG(); } + BUG_ON(E); ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Andi Kleen 提交于
As far as I can see there is nothing in ocfs2_ioctl that requires the BKL, so use unlocked_ioctl Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Jan Kara 提交于
ocfs2_rename() was being too aggressive with the rename lock - we only need it for certain forms of directory rename. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Julia Lawall 提交于
The function ocfs2_start_trans always returns either a valid pointer or a value made with ERR_PTR, so its result should be tested with IS_ERR, not with a test for 0. Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Tao Ma 提交于
Inode allocation is modified to look in other nodes allocators during extreme out of space situations. We retry our own slot when space is freed back to the global bitmap, or whenever we've allocated more than 1024 inodes from another slot. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-
由 Tao Ma 提交于
In inode stealing, we no longer restrict the allocation to happen in the local node. So it is neccessary for us to add a new member in ocfs2_alloc_context to indicate which slot we are using for allocation. We also modify the process of local alloc so that this member can be used there also. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NMark Fasheh <mfasheh@suse.com>
-