We return ENOMEM from mqueue_get_inode even when we have enough memory.
Namely in case the system rlimit of mqueue was reached.  This error
propagates to mq_queue and user sees the error unexpectedly.  So fix
this up to properly return EMFILE as described in the manpage:

	EMFILE The process already has the maximum number of files and
	       message queues open.

instead of:

	ENOMEM Insufficient memory.

With the previous patch we just switch to ERR_PTR/PTR_ERR/IS_ERR error
handling here.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If new_inode fails to allocate an inode we need only to return with
NULL.  But now we test the opposite and have all the work in a nested
block.  So do the opposite to save one indentation level (and remove
unnecessary line breaks).

This is only a preparation/cleanup for the next patch where we fix up
return values from mqueue_get_inode.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cpumask_var_t has one notable difference from cpumask_t.  Add the
explanation.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

NUMA_NO_NODE and numa_node_id() have different meanings.  NUMA_NO_NODE is
obviously the recommended fallback.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adapt new API fashion.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

acct_arg_size() takes ->page_table_lock around add_mm_counter() if
!SPLIT_RSS_COUNTING.  This is not needed after commit 172703b0 ("mm:
delete non-atomic mm counter implementation").
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NMatt Fleming <matt.fleming@linux.intel.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If CONFIG_MODULES=n, it makes no sense to retry the list of binary formats
handler because the list will not be modified by request_module().
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Richard Weinberger <richard@nod.at>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, search_binary_handler() tries to load binary loader module
using request_module() if a loader for the requested program is not yet
loaded.  But second attempt of request_module() does not affect the result
of search_binary_handler().

If request_module() triggered recursion, calling request_module() twice
causes 2 to the power of MAX_KMOD_CONCURRENT (= 50) repetitions.  It is
not an infinite loop but is sufficient for users to consider as a hang up.

Therefore, this patch changes not to call request_module() twice, making 1
to the power of MAX_KMOD_CONCURRENT repetitions in case of recursion.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: NRichard Weinberger <richard@nod.at>
Tested-by: NRichard Weinberger <richard@nod.at>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit a8bef8ff ("mm: migration: avoid race between
shift_arg_pages() and rmap_walk() during migration by not migrating
temporary stacks") introduced a BUG_ON() to ensure that VM_STACK_FLAGS
and VM_STACK_INCOMPLETE_SETUP do not overlap.  The check is a compile
time one, so BUILD_BUG_ON is more appropriate.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDaniel Rebelo de Oliveira <psykon@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If an inode's mode permits opening /proc/PID/io and the resulting file
descriptor is kept across execve() of a setuid or similar binary, the
ptrace_may_access() check tries to prevent using this fd against the
task with escalated privileges.

Unfortunately, there is a race in the check against execve().  If
execve() is processed after the ptrace check, but before the actual io
information gathering, io statistics will be gathered from the
privileged process.  At least in theory this might lead to gathering
sensible information (like ssh/ftp password length) that wouldn't be
available otherwise.

Holding task->signal->cred_guard_mutex while gathering the io
information should protect against the race.

The order of locking is similar to the one inside of ptrace_attach():
first goes cred_guard_mutex, then lock_task_sighand().
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change the return value to ENOENT.  This return value is then returned
when opening the proc entry that have been removed.  For example,
open("/proc/bus/pci/XX/YY") when the corresponding device is being
hot-removed.
Signed-off-by: NDaisuke Ogino <ogino.daisuke@jp.fujitsu.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Harmonise these return values with other architectures.  In some cases
this affects all compilers and in other cases non-gcc compilers only.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ulrich Drepper <drepper@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

do_coredump() assumes that if format_corename() fails it should return
-ENOMEM.  This is not true, for example cn_print_exe_file() can propagate
the error from d_path.  Even if it was true, this is too fragile.  Change
the code to check "ispipe < 0".
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Reviewed-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change every occurence of / in comm and hostname to !.  If the process
changes its name to contain /, the core is not dumped (if the directory
tree doesn't exist like that).  The same with hostname being something
like myhost/3.  Fix this behaviour by using the escape loop used in %E.
(We extract it to a separate function.)

Now both with comm == myprocess/1 and hostname == myhost/1, the core is
dumped like (kernel.core_pattern='core.%p.%e.%h):
core.2349.myprocess!1.myhost!1
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we don't know the file corresponding to the binary (i.e.  exe_file is
unknown), use "task->comm (path unknown)" instead of simple "(unknown)"
as suggested by ak.

The fallback is the same as %e except it will append "(path unknown)".
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[ poleg@redhat.com: no need to declare show_regs() in ptrace.h, sched.h does this ]
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[ This patch has already been accepted as commit 0ac0c0d0 but later
  reverted (commit 35926ff5) because it itroduced arch specific
  __node_random which was defined only for x86 code so it broke other
  archs.  This is a followup without any arch specific code.  Other than
  that there are no functional changes.]

Some workloads that create a large number of small files tend to assign
too many pages to node 0 (multi-node systems).  Part of the reason is
that the rotor (in cpuset_mem_spread_node()) used to assign nodes starts
at node 0 for newly created tasks.

This patch changes the rotor to be initialized to a random node number
of the cpuset.

[akpm@linux-foundation.org: fix layout]
[Lee.Schermerhorn@hp.com: Define stub numa_random() for !NUMA configuration]
[mhocko@suse.cz: Make it arch independent]
[akpm@linux-foundation.org: fix CONFIG_NUMA=y, MAX_NUMNODES>1 build]
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Paul Menage <menage@google.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Menage <menage@google.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

percpu_charge_mutex protects from multiple simultaneous per-cpu charge
caches draining because we might end up having too many work items.  At
least this was the case until commit 26fe6168 ("memcg: fix percpu
cached charge draining frequency") when we introduced a more targeted
draining for async mode.

Now that also sync draining is targeted we can safely remove mutex
because we will not send more work than the current number of CPUs.
FLUSHING_CACHED_CHARGE protects from sending the same work multiple
times and stock->nr_pages == 0 protects from pointless sending a work if
there is obviously nothing to be done.  This is of course racy but we
can live with it as the race window is really small (we would have to
see FLUSHING_CACHED_CHARGE cleared while nr_pages would be still
non-zero).

The only remaining place where we can race is synchronous mode when we
rely on FLUSHING_CACHED_CHARGE test which might have been set by other
drainer on the same group but we should wait in that case as well.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We are checking whether a given two groups are same or at least in the
same subtree of a hierarchy at several places.  Let's make a helper for
it to make code easier to read.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently we have two ways how to drain per-CPU caches for charges.
drain_all_stock_sync will synchronously drain all caches while
drain_all_stock_async will asynchronously drain only those that refer to
a given memory cgroup or its subtree in hierarchy.  Targeted async
draining has been introduced by 26fe6168 (memcg: fix percpu cached
charge draining frequency) to reduce the cpu workers number.

sync draining is currently triggered only from mem_cgroup_force_empty
which is triggered only by userspace (mem_cgroup_force_empty_write) or
when a cgroup is removed (mem_cgroup_pre_destroy).  Although these are
not usually frequent operations it still makes some sense to do targeted
draining as well, especially if the box has many CPUs.

This patch unifies both methods to use the single code (drain_all_stock)
which relies on the original async implementation and just adds
flush_work to wait on all caches that are still under work for the sync
mode.  We are using FLUSHING_CACHED_CHARGE bit check to prevent from
waiting on a work that we haven't triggered.  Please note that both sync
and async functions are currently protected by percpu_charge_mutex so we
cannot race with other drainers.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drain_all_stock_async tries to optimize a work to be done on the work
queue by excluding any work for the current CPU because it assumes that
the context we are called from already tried to charge from that cache
and it's failed so it must be empty already.

While the assumption is correct we can optimize it even more by checking
the current number of pages in the cache.  This will also reduce a work
on other CPUs with an empty stock.

For the current CPU we can simply call drain_local_stock rather than
deferring it to the work queue.

[kamezawa.hiroyu@jp.fujitsu.com: use drain_local_stock for current CPU optimization]
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The commit log of 0ae5e89c ("memcg: count the soft_limit reclaim
in...") says it adds scanning stats to memory.stat file.  But it doesn't
because we considered we needed to make a concensus for such new APIs.

This patch is a trial to add memory.scan_stat. This shows
  - the number of scanned pages(total, anon, file)
  - the number of rotated pages(total, anon, file)
  - the number of freed pages(total, anon, file)
  - the number of elaplsed time (including sleep/pause time)

  for both of direct/soft reclaim.

The biggest difference with oringinal Ying's one is that this file
can be reset by some write, as

  # echo 0 ...../memory.scan_stat

Example of output is here. This is a result after make -j 6 kernel
under 300M limit.

  [kamezawa@bluextal ~]$ cat /cgroup/memory/A/memory.scan_stat
  [kamezawa@bluextal ~]$ cat /cgroup/memory/A/memory.vmscan_stat
  scanned_pages_by_limit 9471864
  scanned_anon_pages_by_limit 6640629
  scanned_file_pages_by_limit 2831235
  rotated_pages_by_limit 4243974
  rotated_anon_pages_by_limit 3971968
  rotated_file_pages_by_limit 272006
  freed_pages_by_limit 2318492
  freed_anon_pages_by_limit 962052
  freed_file_pages_by_limit 1356440
  elapsed_ns_by_limit 351386416101
  scanned_pages_by_system 0
  scanned_anon_pages_by_system 0
  scanned_file_pages_by_system 0
  rotated_pages_by_system 0
  rotated_anon_pages_by_system 0
  rotated_file_pages_by_system 0
  freed_pages_by_system 0
  freed_anon_pages_by_system 0
  freed_file_pages_by_system 0
  elapsed_ns_by_system 0
  scanned_pages_by_limit_under_hierarchy 9471864
  scanned_anon_pages_by_limit_under_hierarchy 6640629
  scanned_file_pages_by_limit_under_hierarchy 2831235
  rotated_pages_by_limit_under_hierarchy 4243974
  rotated_anon_pages_by_limit_under_hierarchy 3971968
  rotated_file_pages_by_limit_under_hierarchy 272006
  freed_pages_by_limit_under_hierarchy 2318492
  freed_anon_pages_by_limit_under_hierarchy 962052
  freed_file_pages_by_limit_under_hierarchy 1356440
  elapsed_ns_by_limit_under_hierarchy 351386416101
  scanned_pages_by_system_under_hierarchy 0
  scanned_anon_pages_by_system_under_hierarchy 0
  scanned_file_pages_by_system_under_hierarchy 0
  rotated_pages_by_system_under_hierarchy 0
  rotated_anon_pages_by_system_under_hierarchy 0
  rotated_file_pages_by_system_under_hierarchy 0
  freed_pages_by_system_under_hierarchy 0
  freed_anon_pages_by_system_under_hierarchy 0
  freed_file_pages_by_system_under_hierarchy 0
  elapsed_ns_by_system_under_hierarchy 0

total_xxxx is for hierarchy management.

This will be useful for further memcg developments and need to be
developped before we do some complicated rework on LRU/softlimit
management.

This patch adds a new struct memcg_scanrecord into scan_control struct.
sc->nr_scanned at el is not designed for exporting information.  For
example, nr_scanned is reset frequentrly and incremented +2 at scanning
mapped pages.

To avoid complexity, I added a new param in scan_control which is for
exporting scanning score.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Cc: Andrew Bresticker <abrestic@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 22a668d7 ("memcg: fix behavior under memory.limit equals to
memsw.limit") introduced "memsw_is_minimum" flag, which becomes true
when mem_limit == memsw_limit.  The flag is checked at the beginning of
reclaim, and "noswap" is set if the flag is true, because using swap is
meaningless in this case.

This works well in most cases, but when we try to shrink mem_limit,
which is the same as memsw_limit now, we might fail to shrink mem_limit
because swap doesn't used.

This patch fixes this behavior by:
 - check MEM_CGROUP_RECLAIM_SHRINK at the begining of reclaim
 - If it is set, don't set "noswap" flag even if memsw_is_minimum is true.
Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 246e87a9 ("memcg: fix get_scan_count() for small targets")
fixes the memcg/kswapd behavior against small targets and prevent vmscan
priority too high.

But the implementation is too naive and adds another problem to small
memcg.  It always force scan to 32 pages of file/anon and doesn't handle
swappiness and other rotate_info.  It makes vmscan to scan anon LRU
regardless of swappiness and make reclaim bad.  This patch fixes it by
adjusting scanning count with regard to swappiness at el.

At a test "cat 1G file under 300M limit." (swappiness=20)
 before patch
        scanned_pages_by_limit 360919
        scanned_anon_pages_by_limit 180469
        scanned_file_pages_by_limit 180450
        rotated_pages_by_limit 31
        rotated_anon_pages_by_limit 25
        rotated_file_pages_by_limit 6
        freed_pages_by_limit 180458
        freed_anon_pages_by_limit 19
        freed_file_pages_by_limit 180439
        elapsed_ns_by_limit 429758872
 after patch
        scanned_pages_by_limit 180674
        scanned_anon_pages_by_limit 24
        scanned_file_pages_by_limit 180650
        rotated_pages_by_limit 35
        rotated_anon_pages_by_limit 24
        rotated_file_pages_by_limit 11
        freed_pages_by_limit 180634
        freed_anon_pages_by_limit 0
        freed_file_pages_by_limit 180634
        elapsed_ns_by_limit 367119089
        scanned_pages_by_system 0

the numbers of scanning anon are decreased(as expected), and elapsed time
reduced. By this patch, small memcgs will work better.
(*) Because the amount of file-cache is much bigger than anon,
    recalaim_stat's rotate-scan counter make scanning files more.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memcg_oom_mutex is used to protect memcg OOM path and eventfd interface
for oom_control.  None of the critical sections which it protects sleep
(eventfd_signal works from atomic context and the rest are simple linked
list resp.  oom_lock atomic operations).

Mutex is also too heavyweight for those code paths because it triggers a
lot of scheduling.  It also makes makes convoying effects more visible
when we have a big number of oom killing because we take the lock
mutliple times during mem_cgroup_handle_oom so we have multiple places
where many processes can sleep.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock
counter which is incremented by mem_cgroup_oom_lock when we are about to
handle memcg OOM situation.  mem_cgroup_handle_oom falls back to a sleep
if oom_lock > 1 to prevent from multiple oom kills at the same time.
The counter is then decremented by mem_cgroup_oom_unlock called from the
same function.

This works correctly but it can lead to serious starvations when we have
many processes triggering OOM and many CPUs available for them (I have
tested with 16 CPUs).

Consider a process (call it A) which gets the oom_lock (the first one
that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other
processes that are blocked on the mutex.  While A releases the mutex and
calls mem_cgroup_out_of_memory others will wake up (one after another)
and increase the counter and fall into sleep (memcg_oom_waitq).

Once A finishes mem_cgroup_out_of_memory it takes the mutex again and
decreases oom_lock and wakes other tasks (if releasing memory by
somebody else - e.g.  killed process - hasn't done it yet).

A testcase would look like:
  Assume malloc XXX is a program allocating XXX Megabytes of memory
  which touches all allocated pages in a tight loop
  # swapoff SWAP_DEVICE
  # cgcreate -g memory:A
  # cgset -r memory.oom_control=0   A
  # cgset -r memory.limit_in_bytes= 200M
  # for i in `seq 100`
  # do
  #     cgexec -g memory:A   malloc 10 &
  # done

The main problem here is that all processes still race for the mutex and
there is no guarantee that we will get counter back to 0 for those that
got back to mem_cgroup_handle_oom.  In the end the whole convoy
in/decreases the counter but we do not get to 1 that would enable
killing so nothing useful can be done.  The time is basically unbounded
because it highly depends on scheduling and ordering on mutex (I have
seen this taking hours...).

This patch replaces the counter by a simple {un}lock semantic.  As
mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to
make sure that nobody else races with us which is guaranteed by the
memcg_oom_mutex.

We have to be careful while locking subtrees because we can encounter a
subtree which is already locked: hierarchy:

          A
        /   \
       B     \
      /\      \
     C  D     E

B - C - D tree might be already locked.  While we want to enable locking
E subtree because OOM situations cannot influence each other we
definitely do not want to allow locking A.

Therefore we have to refuse lock if any subtree is already locked and
clear up the lock for all nodes that have been set up to the failure
point.

On the other hand we have to make sure that the rest of the world will
recognize that a group is under OOM even though it doesn't have a lock.
Therefore we have to introduce under_oom variable which is incremented
and decremented for the whole subtree when we enter resp.  leave
mem_cgroup_handle_oom.  under_oom, unlike oom_lock, doesn't need be
updated under memcg_oom_mutex because its users only check a single
group and they use atomic operations for that.

This can be checked easily by the following test case:

  # cgcreate -g memory:A
  # cgset -r memory.use_hierarchy=1 A
  # cgset -r memory.oom_control=1   A
  # cgset -r memory.limit_in_bytes= 100M
  # cgset -r memory.memsw.limit_in_bytes= 100M
  # cgcreate -g memory:A/B
  # cgset -r memory.oom_control=1 A/B
  # cgset -r memory.limit_in_bytes=20M
  # cgset -r memory.memsw.limit_in_bytes=20M
  # cgexec -g memory:A/B malloc 30  &    #->this will be blocked by OOM of group B
  # cgexec -g memory:A   malloc 80  &    #->this will be blocked by OOM of group A

While B gets oom_lock A will not get it.  Both of them go into sleep and
wait for an external action.  We can make the limit higher for A to
enforce waking it up

  # cgset -r memory.memsw.limit_in_bytes=300M A
  # cgset -r memory.limit_in_bytes=300M A

malloc in A has to wake up even though it doesn't have oom_lock.

Finally, the unlock path is very easy because we always unlock only the
subtree we have locked previously while we always decrement under_oom.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In mm/memcontrol.c, there are many lru stat functions as..

  mem_cgroup_zone_nr_lru_pages
  mem_cgroup_node_nr_file_lru_pages
  mem_cgroup_nr_file_lru_pages
  mem_cgroup_node_nr_anon_lru_pages
  mem_cgroup_nr_anon_lru_pages
  mem_cgroup_node_nr_unevictable_lru_pages
  mem_cgroup_nr_unevictable_lru_pages
  mem_cgroup_node_nr_lru_pages
  mem_cgroup_nr_lru_pages
  mem_cgroup_get_local_zonestat

Some of them are under #ifdef MAX_NUMNODES >1 and others are not.
This seems bad. This patch consolidates all functions into

  mem_cgroup_zone_nr_lru_pages()
  mem_cgroup_node_nr_lru_pages()
  mem_cgroup_nr_lru_pages()

For these functions, "which LRU?" information is passed by a mask.

example:
  mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON))

And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON.

example:
  mem_cgroup_nr_lru_pages(mem, ALL_LRU)

BTW, considering layout of NUMA memory placement of counters, this patch seems
to be better.

Now, when we gather all LRU information, we scan in following orer
    for_each_lru -> for_each_node -> for_each_zone.

This means we'll touch cache lines in different node in turn.

After patch, we'll scan
    for_each_node -> for_each_zone -> for_each_lru(mask)

Then, we'll gather information in the same cacheline at once.

[akpm@linux-foundation.org: fix warnigns, build error]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Each memory cgroup has a 'swappiness' value which can be accessed by
get_swappiness(memcg).  The major user is try_to_free_mem_cgroup_pages()
and swappiness is passed by argument.  It's propagated by scan_control.

get_swappiness() is a static function but some planned updates will need
to get swappiness from files other than memcontrol.c This patch exports
get_swappiness() as mem_cgroup_swappiness().  With this, we can remove the
argument of swapiness from try_to_free...  and drop swappiness from
scan_control.  only memcg uses it.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ying Han <yinghan@google.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ben reported a lockup related to rtc. The lockup happens due to:

CPU0                                        CPU1

rtc_irq_set_state()			    __run_hrtimer()
  spin_lock_irqsave(&rtc->irq_task_lock)    rtc_handle_legacy_irq();
					      spin_lock(&rtc->irq_task_lock);
  hrtimer_cancel()
    while (callback_running);

So the running callback never finishes as it's blocked on
rtc->irq_task_lock.

Use hrtimer_try_to_cancel() instead and drop rtc->irq_task_lock while
waiting for the callback.  Fix this for both rtc_irq_set_state() and
rtc_irq_set_freq().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reported-by: NBen Greear <greearb@candelatech.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Due to the hrtimer self rearming mode a user can DoS the machine simply
because it's starved by hrtimer events.

The RTC hrtimer is self rearming.  We really need to limit the frequency
to something sensible.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ben Greear <greearb@candelatech.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The code checks the correctness of the parameters, but unconditionally
arms/disarms the hrtimer.

The result is that a random task might arm/disarm rtc timer and surprise
the real owner by either generating events or by stopping them.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ben Greear <greearb@candelatech.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dev_opp initial value shoule be ERR_PTR(), IS_ERR() is used to check
error.
Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The address limit is already set in flush_old_exec() so those calls to
set_fs(USER_DS) are redundant.

Also removed the dead code in flush_thread().
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (31 commits)
  MIPS: Close races in TLB modify handlers.
  MIPS: Add uasm UASM_i_SRL_SAFE macro.
  MIPS: RB532: Use hex_to_bin()
  MIPS: Enable cpu_has_clo_clz for MIPS Technologies' platforms
  MIPS: PowerTV: Provide cpu-feature-overrides.h
  MIPS: Remove pointless return statement from empty void functions.
  MIPS: Limit fixrange_init() to the FIXMAP region
  MIPS: Install handlers for software IRQs
  MIPS: Move FIXADDR_TOP into spaces.h
  MIPS: Add SYNC after cacheflush
  MIPS: pfn_valid() is broken on low memory HIGHMEM systems
  MIPS: HIGHMEM DMA on noncoherent MIPS32 processors
  MIPS: topdown mmap support
  MIPS: Remove redundant addr_limit assignment on exec.
  MIPS: AR7: Replace __attribute__((__packed__)) with __packed
  MIPS: AR7: Remove 'space before tabs' in platform.c
  MIPS: Lantiq: Add missing clk_enable and clk_disable functions.
  MIPS: AR7: Fix trailing semicolon bug in clock.c
  MAINTAINERS: Update MIPS entry.
  MIPS: BCM63xx: Remove duplicate PERF_IRQSTAT_REG definition
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (23 commits)
  ceph: document unlocked d_parent accesses
  ceph: explicitly reference rename old_dentry parent dir in request
  ceph: document locking for ceph_set_dentry_offset
  ceph: avoid d_parent in ceph_dentry_hash; fix ceph_encode_fh() hashing bug
  ceph: protect d_parent access in ceph_d_revalidate
  ceph: protect access to d_parent
  ceph: handle racing calls to ceph_init_dentry
  ceph: set dir complete frag after adding capability
  rbd: set blk_queue request sizes to object size
  ceph: set up readahead size when rsize is not passed
  rbd: cancel watch request when releasing the device
  ceph: ignore lease mask
  ceph: fix ceph_lookup_open intent usage
  ceph: only link open operations to directory unsafe list if O_CREAT|O_TRUNC
  ceph: fix bad parent_inode calc in ceph_lookup_open
  ceph: avoid carrying Fw cap during write into page cache
  libceph: don't time out osd requests that haven't been received
  ceph: report f_bfree based on kb_avail rather than diffing.
  ceph: only queue capsnap if caps are dirty
  ceph: fix snap writeback when racing with writes
  ...

so replace it with mdelay(20).

Fixes build error:

  ERROR: "__bad_udelay" [drivers/staging/gma500/psb_gfx.ko] undefined!
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix build issue caused by undefined struct scatterlist in
drivers/usb/renesas_usbhs/fifo.c.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix build issue caused by undefined struct scatterlist in
drivers/mmc/host/tmio_mmc.c.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>