This patch removes the tda9887 stuff from lgdt330x.c.  It's experimental code
which wasn't supposed to leak out and we don't want it in 2.6.13.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Acked-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Two trivial text changes in Kconfig and lgdt330x.c
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Added pci_request_regions() before using the controller to avoid duplicate
usage of the I2O controller when the dpt_i2o driver and I2O subsystem is
loaded at the same time.
Signed-off-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Dave Johnson <djohnson+linux-kernel@sw.starentnetworks.com>

sendmsg()/recvmsg() syscalls from o32/n32 apps to a 64bit kernel will
cause a kernel memory leak if iov_len > UIO_FASTIOV for each syscall!

This is because both sys_sendmsg() and verify_compat_iovec() kmalloc a
new iovec structure.  Only the one from sys_sendmsg() is free'ed.

I wrote a simple test program to confirm this after identifying the
problem:

http://davej.org/programs/testsendmsg.c

Note that the below fix will break solaris_sendmsg()/solaris_recvmsg() as
it also calls verify_compat_iovec() but expects it to malloc internally.

[ I fixed that. -DaveM ]
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to divide, not multiply.  While we're here,
use NSEC_PER_USEC instead of a magic constant.

Based upon a report from Josip Loncaric and a patch
by Andrew Morton.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix thinko in Christoph's changes.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver already depends on CONFIG_PCI in Kconfig.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

envctrl currently uses very odd ways to stop a thread, using various
things that should be exposed to drivers at all.

This patch (which is untested as I don't have sparc hardware) switches
it to use the proper kthread infrastructure.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove new configuration API from i2o_config

The API-patch is still available from the I2O website (which is mentioned in
the kernel config now).  It is removed because it creates a new binary
sysfs-attribute, which doesn't have the limitiation of 4k.  Expect for the
Adaptec controllers, which has a limitation in the hardware this attribute
doesn't make sense anywhere else.  Until the sysfs API provides an attribute
which doesn't buffer (like firmware) and let access to at least 64k blocks i
provide a separate patch...

(akpm: basically, this API was introduced post-2.6.12 and Markus wants to pull
it out before 2.6.13).
Signed-off-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixed problems so we can build with gcc-4.0.1
Signed-off-by: NPeter Schaefer-Hutter <peter.schaefer-hutter@tfk-racoms.com>
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* Makes dpram allocations work
* Makes non-console UART work on both 8xx and 82xx
* Fixed whitespace in files that were touched
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NPantelis Antoniou <panto@intracom.gr>
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix possible cpuset_sem ABBA deadlock if 'notify_on_release' set.

For a particular usage pattern, creating and destroying cpusets fairly
frequently using notify_on_release, on a very large system, this deadlock
can be seen every few days.  If you are not using the cpuset
notify_on_release feature, you will never see this deadlock.

The existing code, on task exit (or cpuset deletion) did:

  get cpuset_sem
  if cpuset marked notify_on_release and is ready to release:
    compute cpuset path relative to /dev/cpuset mount point
    call_usermodehelper() forks /sbin/cpuset_release_agent with path
  drop cpuset_sem

Unfortunately, the fork in call_usermodehelper can allocate memory, and
allocating memory can require cpuset_sem, if the mems_generation values
changed in the interim.  This results in an ABBA deadlock, trying to obtain
cpuset_sem when it is already held by the current task.

To fix this, I put the cpuset path (which must be computed while holding
cpuset_sem) in a temporary buffer, to be used in the call_usermodehelper
call of /sbin/cpuset_release_agent only _after_ dropping cpuset_sem.

So the new logic is:

  get cpuset_sem
  if cpuset marked notify_on_release and is ready to release:
    compute cpuset path relative to /dev/cpuset mount point
    stash path in kmalloc'd buffer
  drop cpuset_sem
  call_usermodehelper() forks /sbin/cpuset_release_agent with path
  free path

The sharp eyed reader might notice that this patch does not contain any
calls to kmalloc.  The existing code in the check_for_release() routine was
already kmalloc'ing a buffer to hold the cpuset path.  In the old code, it
just held the buffer for a few lines, over the cpuset_release_agent() call
that in turn invoked call_usermodehelper().  In the new code, with the
application of this patch, it returns that buffer via the new char
**ppathbuf parameter, for later use and freeing in cpuset_release_agent(),
which is called after cpuset_sem is dropped.  Whereas the old code has just
one call to cpuset_release_agent(), right in the check_for_release()
routine, the new code has three calls to cpuset_release_agent(), from the
various places that a cpuset can be released.

This patch has been build and booted on SN2, and passed a stress test that
previously hit the deadlock within a few seconds.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Compile fix for the BCM1250 I2C driver.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

i8xx_tco.c v0.08: only "arm" the watchdog when the watchdog has been
started.  (Kernel Bug 4251: system reset when battery is read and i8xx_tco
driver loaded)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This removes the now unused fsnotify_unlink & fsnotify_rmdir code.
Compile tested.
Signed-off-by: NJohn McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Revert commit fec59a71, which is
breaking sparc64 that doesn't have a working pci_update_resource.

We'll re-do this after 2.6.13 when we'll do it all properly.

Fix a null dereference in module unload path.

Found by a simple modprobe icn ; rmmod icn
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

this changeset broke the "nohalt" kernel boot option.
  8df5a500

default_idle() is looking at new variable can_do_pal_halt.  However,
that variable did not get cleared upon "nohalt" boot option.  Result
is that "nohalt" option is ignored until perfmon is exercised.
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

modprobe aes does not work on x86_64.  i386 has a similar line, this could
be the right fix.  Would be nice to have in 2.6.13 final.
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The memory mappings for MPC8349 USB MPH and DR modules were reversed.
Signed-off-by: NLi Yang <LeoLi@freescale.com>
Signed-off-by: NJiang Bo <Tanya.jiang@freescale.com>
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Here's a small patch to cleanup NETDEBUG() use in net/ipv4/ for Linux 
kernel 2.6.13-rc5. Also weird use of indentation is changed in some
places.
Signed-off-by: NHeikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NETLINK_ARPD is unused, allocate it to the Open-iSCSI folks.

NETLINK_ROUTE6 and NETLINK_TAPBASE are no longer used, delete
them.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The patch below unhooks fsnotify from vfs_unlink & vfs_rmdir.  It
introduces two new fsnotify calls, that are hooked in at the dcache
level.  This not only more closely matches how the VFS layer works, it
also avoids the problem with locking and inode lifetimes.

The two functions are

 - fsnotify_nameremove -- called when a directory entry is going away.
   It notifies the PARENT of the deletion.  This is called from
   d_delete().

 - inoderemove -- called when the files inode itself is going away.  It
   notifies the inode that is being deleted.  This is called from
   dentry_iput().
Signed-off-by: NJohn McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Structural changes within lgdt330x driver, framework now supports
  both chips... tested OK on lgdt3302 and lgdt3303.
- Add LG/TUA6034 dvb_pll_desc for ATSC with LG TDVS-H062F & DViCO FusionHDTV5.
- Fixed LGDT330X signal strength: For now, always set it to 0.
- Corrected LGDT330X boundary condition error in read_snr: dB calculation.
Signed-off-by: NMac Michaels <wmichaels1@earthlink.net>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Martin Schwidesky <schwidefsky@de.ibm.com>

Convert qeth to the new klist interface and make it compiling again.
Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With the introduction of 'rustynat' in 2.6.11, the old tricks of preventing
NAT of 'untracked' connections (e.g. NOTRACK target in 'raw' table) are no
longer sufficient.

The ip_conntrack_untracked.status |= IPS_NAT_DONE_MASK effectively
prevents iteration of the 'nat' table, but doesn't prevent nat_packet()
to be executed.  Since nr_manips is gone in 'rustynat', nat_packet() now
implicitly thinks that it has to do NAT on the packet.

This patch fixes that problem by explicitly checking for
ip_conntrack_untracked in ip_nat_fn().
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Like many other southbridges from different manufacturers, VIA VT8235
chip has two non-standard BARs for power management and SMBus registers
(see the datasheet at http://www.via.com.tw).

This new quirk routine fixes boot problem with 2.6.13-rc2/rc6 kernels on
Targa Visionary 811 Athlon64 laptop, as reported by Mikael Pettersson
<mikpe@csd.uu.se>.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reported by:Vincent Fortier (Bugzilla Bug 4768)

"At boot time the screen appears moved to the mid right portion of the actual
video pannel making the end of the line appears at the left edge...  It simply
looks like moved half way to the right"

His particular hardware has a display with an unusual dimension (1920x1200) but
unfortunately has no EDID block. None of the entries in the global mode
database is correct for this particular display, and it particularly has
difficulty scaling up 640x480 (the default startup mode of nvidiafb) to
1920x1200 which causes the above described problem.

1, Add 1920x1200 to the global mode database.

2. Let nvidiafb base the startup mode from the flatpanel dimensions only if the
  EDID block is absent, no boot mode parameter is specified by the user, and
  a flatpanel/LCD display is attached.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update the default/example configs for ppc64.  Pretty boring...
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds a bpa_defconfig file and make target. The config settings
are made for the current version of the Cell Processor Based Blade,
so there are not too many drivers enabled. A few more drivers might
get added in the future though.
Signed-off-by: NArnd Bergmann <arndb@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Last (?) -rc, partly brought on by the aic7xxx performance fixes (ie get
them tested in an -rc release before the real 2.6.13).

This patch fixes a typo in lib/crc32.c which results in incorrect debug
output.
Signed-off-by: NDominik Hackl <dominik@hackl.dhs.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the fix to align node_end_pfns to a proper location.  The earlier fix
made the node_remap_start_vaddr to get misaligned causing remap_numa_kva to
barf again :-/
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>