omap: headers: Move remaining headers from include/mach to include/plat

Move the remaining headers under plat-omap/include/mach
to plat-omap/include/plat. Also search and replace the
files using these headers to include using the right path.

This was done with:

#!/bin/bash
mach_dir_old="arch/arm/plat-omap/include/mach"
plat_dir_new="arch/arm/plat-omap/include/plat"
headers=$(cd $mach_dir_old && ls *.h)
omap_dirs="arch/arm/*omap*/ \
drivers/video/omap \
sound/soc/omap"
other_files="drivers/leds/leds-ams-delta.c \
drivers/mfd/menelaus.c \
drivers/mfd/twl4030-core.c \
drivers/mtd/nand/ams-delta.c"

for header in $headers; do
	old="#include <mach\/$header"
	new="#include <plat\/$header"
	for dir in $omap_dirs; do
		find $dir -type f -name \*.[chS] | \
			xargs sed -i "s/$old/$new/"
	done
	find drivers/ -type f -name \*omap*.[chS] | \
		xargs sed -i "s/$old/$new/"
	for file in $other_files; do
		sed -i "s/$old/$new/" $file
	done
done

for header in $(ls $mach_dir_old/*.h); do
	git mv $header $plat_dir_new/
done
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/board-ams-delta.c

@@ -25,13 +25,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-ams-delta.h>
+#include <plat/board-ams-delta.h>
 #include <mach/gpio.h>
-#include <mach/keypad.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/keypad.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;

arch/arm/mach-omap1/board-fsample.c

@@ -26,14 +26,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
-#include <mach/nand.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/board.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
+#include <plat/nand.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
 /* fsample is pretty close to p2-sample */
 

arch/arm/mach-omap1/board-generic.c

@@ -23,10 +23,10 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static void __init omap_generic_init_irq(void)
 {

arch/arm/mach-omap1/board-h2-mmc.c

@@ -16,7 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
 
 #include "board-h2.h"

arch/arm/mach-omap1/board-h2.c

@@ -37,14 +37,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/nand.h>
-#include <mach/irda.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/nand.h>
+#include <plat/irda.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #include "board-h2.h"
 

arch/arm/mach-omap1/board-h3-mmc.c

@@ -16,7 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
 
 #include "board-h3.h"

arch/arm/mach-omap1/board-h3.c

@@ -40,13 +40,13 @@
 #include <asm/mach/map.h>
 
 #include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/nand.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/dma.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/dma.h>
+#include <plat/common.h>
 
 #include "board-h3.h"
 

arch/arm/mach-omap1/board-innovator.c

@@ -30,14 +30,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
-#include <mach/tc.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/mmc.h>
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START	0x04000300

arch/arm/mach-omap1/board-nokia770.c

@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/dsp_common.h>
-#include <mach/omapfb.h>
-#include <mach/hwa742.h>
-#include <mach/lcd_mipid.h>
-#include <mach/mmc.h>
-#include <mach/clock.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/dsp_common.h>
+#include <plat/omapfb.h>
+#include <plat/hwa742.h>
+#include <plat/lcd_mipid.h>
+#include <plat/mmc.h>
+#include <plat/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 

arch/arm/mach-omap1/board-osk.c

@@ -47,10 +47,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/usb.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/common.h>
+#include <plat/usb.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/common.h>
 
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
 #define OMAP_OSK_ETHR_START		0x04800300
@@ -312,7 +312,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = {
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <mach/keypad.h>
+#include <plat/keypad.h>
 
 static struct at24_platform_data at24c04 = {
 	.byte_len	= SZ_4K / 8,

arch/arm/mach-omap1/board-palmte.c

@@ -34,14 +34,14 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/tc.h>
-#include <mach/dma.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/tc.h>
+#include <plat/dma.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1

arch/arm/mach-omap1/board-palmtt.c

@@ -29,16 +29,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/led.h>
+#include <plat/led.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>

arch/arm/mach-omap1/board-palmz71.c

@@ -33,15 +33,15 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/omap-alsa.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>

arch/arm/mach-omap1/board-perseus2.c

@@ -26,14 +26,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
-#include <mach/nand.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/board.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
+#include <plat/nand.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
 static int p2_keymap[] = {
 	KEY(0,0,KEY_UP),

arch/arm/mach-omap1/board-sx1-mmc.c

@@ -15,9 +15,9 @@
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
-#include <mach/board-sx1.h>
+#include <plat/board-sx1.h>
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 

arch/arm/mach-omap1/board-sx1.c

@@ -33,15 +33,15 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/irda.h>
-#include <mach/usb.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/keypad.h>
-#include <mach/board-sx1.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/irda.h>
+#include <plat/usb.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/keypad.h>
+#include <plat/board-sx1.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)

arch/arm/mach-omap1/board-voiceblue.c

@@ -29,11 +29,11 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/common.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/usb.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
 
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{

arch/arm/mach-omap1/clock.c

@@ -22,10 +22,10 @@
 #include <asm/mach-types.h>
 #include <asm/clkdev.h>
 
-#include <mach/cpu.h>
-#include <mach/usb.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/cpu.h>
+#include <plat/usb.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 
 static const struct clkops clkops_generic;
 static const struct clkops clkops_uart;

arch/arm/mach-omap1/devices.c

@@ -18,11 +18,11 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 
 /*-------------------------------------------------------------------------*/
 

arch/arm/mach-omap1/fpga.c

@@ -27,7 +27,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 static void fpga_mask_irq(unsigned int irq)

arch/arm/mach-omap1/id.c

@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 #define OMAP_DIE_ID_0		0xfffe1800
 #define OMAP_DIE_ID_1		0xfffe1804

arch/arm/mach-omap1/io.c

@@ -15,8 +15,8 @@
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
 
 extern int omap1_clk_init(void);
 extern void omap_check_revision(void);

arch/arm/mach-omap1/irq.c

@@ -46,7 +46,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <mach/gpio.h>
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 #define IRQ_BANK(irq) ((irq) >> 5)
 #define IRQ_BIT(irq)  ((irq) & 0x1f)

arch/arm/mach-omap1/leds-h2p2-debug.c

@@ -19,7 +19,7 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 #include "leds.h"

arch/arm/mach-omap1/leds.c

@@ -10,7 +10,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #include "leds.h"
 

arch/arm/mach-omap1/mailbox.c

@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <mach/mailbox.h>
+#include <plat/mailbox.h>
 #include <mach/irqs.h>
 
 #define MAILBOX_ARM2DSP1		0x00

arch/arm/mach-omap1/mcbsp.c

@@ -18,11 +18,11 @@
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/cpu.h>
-#include <mach/mcbsp.h>
-#include <mach/dsp_common.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/cpu.h>
+#include <plat/mcbsp.h>
+#include <plat/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)

arch/arm/mach-omap1/mux.c

@@ -29,7 +29,7 @@
 
 #include <asm/system.h>
 
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 

arch/arm/mach-omap1/pm.c

@@ -48,14 +48,14 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 #include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/tc.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/dmtimer.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/tc.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/dmtimer.h>
 
 #include "pm.h"
 

arch/arm/mach-omap1/serial.c

@@ -22,10 +22,10 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 
 static struct clk * uart1_ck;
 static struct clk * uart2_ck;

arch/arm/mach-omap1/timer32k.c

@@ -52,7 +52,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 
 struct sys_timer omap_timer;
 

arch/arm/mach-omap2/board-2430sdp.c

@@ -31,12 +31,12 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/usb.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+#include <plat/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 

arch/arm/mach-omap2/board-3430sdp.c

@@ -29,17 +29,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/usb.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-
-#include <mach/control.h>
-#include <mach/keypad.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/usb.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+
+#include <plat/control.h>
+#include <plat/keypad.h>
+#include <plat/gpmc-smc91x.h>
 
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"

arch/arm/mach-omap2/board-4430sdp.c

@@ -23,10 +23,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/control.h>
-#include <mach/timer-gp.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/timer-gp.h>
 #include <asm/hardware/gic.h>
 
 static struct platform_device sdp4430_lcd_device = {

arch/arm/mach-omap2/board-apollon.c

@@ -33,13 +33,13 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/led.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/control.h>
+#include <plat/led.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13

arch/arm/mach-omap2/board-generic.c

@@ -26,10 +26,10 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static struct omap_board_config_kernel generic_config[] = {
 };

arch/arm/mach-omap2/board-h4.c

@@ -31,16 +31,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/control.h>
+#include <plat/control.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/keypad.h>
-#include <mach/menelaus.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/keypad.h>
+#include <plat/menelaus.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
 
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1

arch/arm/mach-omap2/board-ldp.c

@@ -32,16 +32,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 #include <mach/gpio.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
 
 #include <asm/delay.h>
-#include <mach/control.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
+#include <plat/control.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
 
 #include "mmc-twl4030.h"
 

arch/arm/mach-omap2/board-n8x0.c

@@ -23,12 +23,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/irqs.h>
-#include <mach/mcspi.h>
-#include <mach/onenand.h>
-#include <mach/serial.h>
+#include <plat/mcspi.h>
+#include <plat/onenand.h>
+#include <plat/serial.h>
 
 static struct omap2_mcspi_device_config p54spi_mcspi_config = {
 	.turbo_mode	= 0,

arch/arm/mach-omap2/board-omap3beagle.c

@@ -37,13 +37,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/timer-gp.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
 
 #include "mmc-twl4030.h"
 

arch/arm/mach-omap2/board-omap3evm.c

@@ -32,12 +32,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/common.h>
-#include <mach/mcspi.h>
-#include <mach/keypad.h>
+#include <plat/board.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/common.h>
+#include <plat/mcspi.h>
+#include <plat/keypad.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"

arch/arm/mach-omap2/board-omap3pandora.c

@@ -33,14 +33,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
 #include <mach/hardware.h>
-#include <mach/mcspi.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/mux.h>
+#include <plat/mcspi.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/mux.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"

arch/arm/mach-omap2/board-overo.c

@@ -38,14 +38,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 #include <mach/hardware.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
+#include <plat/nand.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
@@ -67,7 +67,7 @@
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -21,15 +21,15 @@
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-#include <mach/keypad.h>
-#include <mach/onenand.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/keypad.h>
+#include <plat/onenand.h>
+#include <plat/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 

arch/arm/mach-omap2/board-rx51.c

@@ -22,14 +22,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/keypad.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-#include <mach/usb.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/keypad.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
 
 static struct omap_lcd_config rx51_lcd_config = {
 	.ctrl_name	= "internal",

arch/arm/mach-omap2/board-zoom-debugboard.c

@@ -14,7 +14,7 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 
 #define ZOOM2_SMSC911X_CS	7
 #define ZOOM2_SMSC911X_GPIO	158

arch/arm/mach-omap2/board-zoom2.c

@@ -20,9 +20,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
+#include <plat/common.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
 
 #include "mmc-twl4030.h"
 #include "sdram-micron-mt46h32m32lf-6.h"

arch/arm/mach-omap2/clock.c

@@ -24,13 +24,13 @@
 #include <linux/io.h>
 #include <linux/bitops.h>
 
-#include <mach/clock.h>
-#include <mach/clockdomain.h>
-#include <mach/cpu.h>
-#include <mach/prcm.h>
+#include <plat/clock.h>
+#include <plat/clockdomain.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
 #include <asm/div64.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 #include "clock.h"
 #include "prm.h"

arch/arm/mach-omap2/clock.h

@@ -16,7 +16,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000

arch/arm/mach-omap2/clock24xx.c

@@ -28,13 +28,13 @@
 #include <linux/cpufreq.h>
 #include <linux/bitops.h>
 
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/prcm.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/prcm.h>
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "clock.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"

arch/arm/mach-omap2/clock34xx.c

@@ -27,13 +27,13 @@
 #include <linux/limits.h>
 #include <linux/bitops.h>
 
-#include <mach/cpu.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "clock.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"

arch/arm/mach-omap2/clock34xx.h

@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 
-#include <mach/control.h>
+#include <plat/control.h>
 
 #include "clock.h"
 #include "cm.h"

arch/arm/mach-omap2/clockdomain.c

@@ -28,14 +28,14 @@
 
 #include <linux/bitops.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "cm.h"
 
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 /* clkdm_list contains all registered struct clockdomains */
 static LIST_HEAD(clkdm_list);

arch/arm/mach-omap2/clockdomains.h

@@ -10,7 +10,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 
-#include <mach/clockdomain.h>
+#include <plat/clockdomain.h>
 
 /*
  * OMAP2/3-common clockdomains

arch/arm/mach-omap2/control.c

@@ -15,8 +15,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/control.h>
+#include <plat/common.h>
+#include <plat/control.h>
 
 static void __iomem *omap2_ctrl_base;
 

arch/arm/mach-omap2/devices.c

@@ -20,12 +20,12 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/control.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/control.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 
 #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
 
@@ -250,7 +250,7 @@ static inline void omap_init_sti(void) {}
 
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 
 #define OMAP2_MCSPI1_BASE		0x48098000
 #define OMAP2_MCSPI2_BASE		0x4809a000

arch/arm/mach-omap2/gpmc-onenand.c

@@ -17,9 +17,9 @@
 
 #include <asm/mach/flash.h>
 
-#include <mach/onenand.h>
-#include <mach/board.h>
-#include <mach/gpmc.h>
+#include <plat/onenand.h>
+#include <plat/board.h>
+#include <plat/gpmc.h>
 
 static struct omap_onenand_platform_data *gpmc_onenand_data;
 

arch/arm/mach-omap2/gpmc-smc91x.c

@@ -17,9 +17,9 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 
-#include <mach/board.h>
-#include <mach/gpmc.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/board.h>
+#include <plat/gpmc.h>
+#include <plat/gpmc-smc91x.h>
 
 static struct omap_smc91x_platform_data *gpmc_cfg;
 

arch/arm/mach-omap2/gpmc.c

@@ -24,9 +24,9 @@
 #include <linux/module.h>
 
 #include <asm/mach-types.h>
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* GPMC register offsets */
 #define GPMC_REVISION		0x00

arch/arm/mach-omap2/id.c

@@ -21,9 +21,9 @@
 
 #include <asm/cputype.h>
 
-#include <mach/common.h>
-#include <mach/control.h>
-#include <mach/cpu.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/cpu.h>
 
 static struct omap_chip_id omap_chip;
 static unsigned int omap_revision;

arch/arm/mach-omap2/include/mach/entry-macro.S

@@ -15,8 +15,8 @@
 #include <mach/irqs.h>
 #include <asm/hardware/gic.h>
 
-#include <mach/omap24xx.h>
-#include <mach/omap34xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
 
 /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
 #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
@@ -25,7 +25,7 @@
 #define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
-#include <mach/omap44xx.h>
+#include <plat/omap44xx.h>
 #endif
 #define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
 #define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */

arch/arm/mach-omap2/io.c

@@ -27,24 +27,24 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/omapfb.h>
-#include <mach/sram.h>
-#include <mach/sdrc.h>
-#include <mach/gpmc.h>
-#include <mach/serial.h>
+#include <plat/mux.h>
+#include <plat/omapfb.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+#include <plat/gpmc.h>
+#include <plat/serial.h>
 
 #ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
-#include <mach/omap-pm.h>
-#include <mach/powerdomain.h>
+#include <plat/omap-pm.h>
+#include <plat/powerdomain.h>
 #include "powerdomains.h"
 
-#include <mach/clockdomain.h>
+#include <plat/clockdomain.h>
 #include "clockdomains.h"
 #endif
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include "omap_hwmod_2420.h"
 #include "omap_hwmod_2430.h"
 #include "omap_hwmod_34xx.h"

arch/arm/mach-omap2/iommu2.c

@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/stringify.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
 /*
  * omap2 architecture specific register bit definitions

arch/arm/mach-omap2/mailbox.c

@@ -15,7 +15,7 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <mach/mailbox.h>
+#include <plat/mailbox.h>
 #include <mach/irqs.h>
 
 #define MAILBOX_REVISION		0x000

arch/arm/mach-omap2/mcbsp.c

@@ -18,10 +18,10 @@
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/cpu.h>
-#include <mach/mcbsp.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/cpu.h>
+#include <plat/mcbsp.h>
 
 static void omap2_mcbsp2_mux_setup(void)
 {

arch/arm/mach-omap2/mmc-twl4030.c

@@ -20,9 +20,9 @@
 #include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
-#include <mach/control.h>
-#include <mach/mmc.h>
-#include <mach/board.h>
+#include <plat/control.h>
+#include <plat/mmc.h>
+#include <plat/board.h>
 
 #include "mmc-twl4030.h"
 

arch/arm/mach-omap2/mux.c

@@ -30,8 +30,8 @@
 
 #include <asm/system.h>
 
-#include <mach/control.h>
-#include <mach/mux.h>
+#include <plat/control.h>
+#include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 

arch/arm/mach-omap2/omap-smp.c

@@ -24,7 +24,7 @@
 #include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
-#include <mach/common.h>
+#include <plat/common.h>
 
 /* Registers used for communicating startup information */
 static void __iomem *omap4_auxcoreboot_reg0;

arch/arm/mach-omap2/omap3-iommu.c

@@ -12,7 +12,7 @@
 
 #include <linux/platform_device.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
 #define OMAP3_MMU1_BASE	0x480bd400
 #define OMAP3_MMU2_BASE	0x5d000000

arch/arm/mach-omap2/omap_hwmod.c

@@ -45,11 +45,11 @@
 #include <linux/mutex.h>
 #include <linux/bootmem.h>
 
-#include <mach/cpu.h>
-#include <mach/clockdomain.h>
-#include <mach/powerdomain.h>
-#include <mach/clock.h>
-#include <mach/omap_hwmod.h>
+#include <plat/cpu.h>
+#include <plat/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clock.h>
+#include <plat/omap_hwmod.h>
 
 #include "cm.h"
 

arch/arm/mach-omap2/omap_hwmod_2420.h

@@ -16,10 +16,10 @@
 
 #ifdef CONFIG_ARCH_OMAP2420
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-24xx.h"
 

arch/arm/mach-omap2/omap_hwmod_2430.h

@@ -16,10 +16,10 @@
 
 #ifdef CONFIG_ARCH_OMAP2430
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-24xx.h"
 

arch/arm/mach-omap2/omap_hwmod_34xx.h

@@ -14,10 +14,10 @@
 
 #ifdef CONFIG_ARCH_OMAP34XX
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-34xx.h"
 

arch/arm/mach-omap2/pm-debug.c

@@ -26,10 +26,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 
-#include <mach/clock.h>
-#include <mach/board.h>
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/clock.h>
+#include <plat/board.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 #include "prm.h"
 #include "cm.h"

arch/arm/mach-omap2/pm.h

@@ -11,7 +11,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);

arch/arm/mach-omap2/pm24xx.c

@@ -36,12 +36,12 @@
 #include <asm/mach-types.h>
 
 #include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/board.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/board.h>
 
 #include "prm.h"
 #include "prm-regbits-24xx.h"
@@ -50,8 +50,8 @@
 #include "sdrc.h"
 #include "pm.h"
 
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,

arch/arm/mach-omap2/pm34xx.c

@@ -23,11 +23,11 @@
 #include <linux/err.h>
 #include <linux/gpio.h>
 
-#include <mach/sram.h>
-#include <mach/clockdomain.h>
-#include <mach/powerdomain.h>
-#include <mach/control.h>
-#include <mach/serial.h>
+#include <plat/sram.h>
+#include <plat/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/control.h>
+#include <plat/serial.h>
 
 #include "cm.h"
 #include "cm-regbits-34xx.h"

arch/arm/mach-omap2/powerdomain.c

@@ -31,9 +31,9 @@
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 
-#include <mach/cpu.h>
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/cpu.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 #include "pm.h"
 

arch/arm/mach-omap2/powerdomains.h

@@ -63,7 +63,7 @@
  * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"

arch/arm/mach-omap2/powerdomains24xx.h

@@ -20,7 +20,7 @@
  * the array in mach-omap2/powerdomains.h.
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"

arch/arm/mach-omap2/powerdomains34xx.h

@@ -20,7 +20,7 @@
  * the array in mach-omap2/powerdomains.h.
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"

arch/arm/mach-omap2/prcm.c

@@ -19,8 +19,8 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 
-#include <mach/common.h>
-#include <mach/prcm.h>
+#include <plat/common.h>
+#include <plat/prcm.h>
 
 #include "clock.h"
 #include "prm.h"

arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h

@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
 #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* Micron MT46H32M32LF-6 */
 /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */

arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h

@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* Qimonda HYB18M512160AF-6 */
 static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {

arch/arm/mach-omap2/sdrc.c

@@ -23,13 +23,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/common.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 
 #include "prm.h"
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 
 static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;

arch/arm/mach-omap2/sdrc.h

@@ -15,7 +15,7 @@
  */
 #undef DEBUG
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 #ifndef __ASSEMBLER__
 extern void __iomem *omap2_sdrc_base;

arch/arm/mach-omap2/sdrc2xxx.c

@@ -24,13 +24,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/common.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 
 #include "prm.h"
 #include "clock.h"
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 
 /* Memory timing, DLL mode flags */

arch/arm/mach-omap2/serial.c

@@ -24,10 +24,10 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/board.h>
-#include <mach/clock.h>
-#include <mach/control.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/clock.h>
+#include <plat/control.h>
 
 #include "prm.h"
 #include "pm.h"

arch/arm/mach-omap2/sleep24xx.S

@@ -29,7 +29,7 @@
 #include <asm/assembler.h>
 #include <mach/io.h>
 
-#include <mach/omap24xx.h>
+#include <plat/omap24xx.h>
 
 #include "sdrc.h"
 

arch/arm/mach-omap2/sleep34xx.S

@@ -27,7 +27,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/control.h>
+#include <plat/control.h>
 
 #include "prm.h"
 #include "sdrc.h"

arch/arm/mach-omap2/timer-gp.c

@@ -37,7 +37,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 #include <asm/localtimer.h>
 
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */

arch/arm/mach-omap2/usb-musb.c

@@ -28,8 +28,8 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
 
 #ifdef CONFIG_USB_MUSB_SOC
 

arch/arm/mach-omap2/usb-tusb6010.c

@@ -16,8 +16,8 @@
 
 #include <linux/usb/musb.h>
 
-#include <mach/gpmc.h>
-#include <mach/mux.h>
+#include <plat/gpmc.h>
+#include <plat/mux.h>
 
 
 static u8		async_cs, sync_cs;

arch/arm/plat-omap/clock.c

@@ -24,7 +24,7 @@
 #include <linux/debugfs.h>
 #include <linux/io.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);

arch/arm/plat-omap/common.c

@@ -29,13 +29,13 @@
 #include <asm/mach/map.h>
 #include <asm/setup.h>
 
-#include <mach/common.h>
-#include <mach/board.h>
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/sdrc.h"

arch/arm/plat-omap/cpu-omap.c

@@ -23,7 +23,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/clock.h>
+#include <plat/clock.h>
 #include <asm/system.h>
 
 #define VERY_HI_RATE	900000000

arch/arm/plat-omap/debug-devices.c

@@ -16,7 +16,7 @@
 
 #include <mach/hardware.h>
 
-#include <mach/board.h>
+#include <plat/board.h>
 #include <mach/gpio.h>
 
 

arch/arm/plat-omap/debug-leds.c

@@ -18,7 +18,7 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 

arch/arm/plat-omap/devices.c

@@ -19,15 +19,15 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/control.h>
-#include <mach/board.h>
-#include <mach/mmc.h>
-#include <mach/mux.h>
+#include <plat/tc.h>
+#include <plat/control.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/menelaus.h>
-#include <mach/mcbsp.h>
-#include <mach/dsp_common.h>
+#include <plat/menelaus.h>
+#include <plat/mcbsp.h>
+#include <plat/dsp_common.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 

arch/arm/plat-omap/dma.c

@@ -32,9 +32,9 @@
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <mach/dma.h>
+#include <plat/dma.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 
 #undef DEBUG