提交 7a186422 编写于 作者: L Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/bnx2-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/bnx2-2.6:
  [BNX2]: PHY workaround for 5709 A0.
...@@ -57,8 +57,8 @@ ...@@ -57,8 +57,8 @@
#define DRV_MODULE_NAME "bnx2" #define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": " #define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "1.5.4" #define DRV_MODULE_VERSION "1.5.5"
#define DRV_MODULE_RELDATE "January 24, 2007" #define DRV_MODULE_RELDATE "February 1, 2007"
#define RUN_AT(x) (jiffies + (x)) #define RUN_AT(x) (jiffies + (x))
...@@ -1356,6 +1356,14 @@ bnx2_init_copper_phy(struct bnx2 *bp) ...@@ -1356,6 +1356,14 @@ bnx2_init_copper_phy(struct bnx2 *bp)
bnx2_write_phy(bp, 0x18, 0x0400); bnx2_write_phy(bp, 0x18, 0x0400);
} }
if (bp->phy_flags & PHY_DIS_EARLY_DAC_FLAG) {
bnx2_write_phy(bp, MII_BNX2_DSP_ADDRESS,
MII_BNX2_DSP_EXPAND_REG | 0x8);
bnx2_read_phy(bp, MII_BNX2_DSP_RW_PORT, &val);
val &= ~(1 << 8);
bnx2_write_phy(bp, MII_BNX2_DSP_RW_PORT, val);
}
if (bp->dev->mtu > 1500) { if (bp->dev->mtu > 1500) {
/* Set extended packet length bit */ /* Set extended packet length bit */
bnx2_write_phy(bp, 0x18, 0x7); bnx2_write_phy(bp, 0x18, 0x7);
...@@ -5918,6 +5926,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) ...@@ -5918,6 +5926,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
} else if (CHIP_NUM(bp) == CHIP_NUM_5706 || } else if (CHIP_NUM(bp) == CHIP_NUM_5706 ||
CHIP_NUM(bp) == CHIP_NUM_5708) CHIP_NUM(bp) == CHIP_NUM_5708)
bp->phy_flags |= PHY_CRC_FIX_FLAG; bp->phy_flags |= PHY_CRC_FIX_FLAG;
else if (CHIP_ID(bp) == CHIP_ID_5709_A0)
bp->phy_flags |= PHY_DIS_EARLY_DAC_FLAG;
if ((CHIP_ID(bp) == CHIP_ID_5708_A0) || if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||
(CHIP_ID(bp) == CHIP_ID_5708_B0) || (CHIP_ID(bp) == CHIP_ID_5708_B0) ||
......
...@@ -6288,6 +6288,10 @@ struct l2_fhdr { ...@@ -6288,6 +6288,10 @@ struct l2_fhdr {
#define BCM5708S_TX_ACTL3 0x17 #define BCM5708S_TX_ACTL3 0x17
#define MII_BNX2_DSP_RW_PORT 0x15
#define MII_BNX2_DSP_ADDRESS 0x17
#define MII_BNX2_DSP_EXPAND_REG 0x0f00
#define MIN_ETHERNET_PACKET_SIZE 60 #define MIN_ETHERNET_PACKET_SIZE 60
#define MAX_ETHERNET_PACKET_SIZE 1514 #define MAX_ETHERNET_PACKET_SIZE 1514
#define MAX_ETHERNET_JUMBO_PACKET_SIZE 9014 #define MAX_ETHERNET_JUMBO_PACKET_SIZE 9014
...@@ -6489,6 +6493,7 @@ struct bnx2 { ...@@ -6489,6 +6493,7 @@ struct bnx2 {
#define PHY_INT_MODE_MASK_FLAG 0x300 #define PHY_INT_MODE_MASK_FLAG 0x300
#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100 #define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100
#define PHY_INT_MODE_LINK_READY_FLAG 0x200 #define PHY_INT_MODE_LINK_READY_FLAG 0x200
#define PHY_DIS_EARLY_DAC_FLAG 0x400
u32 chip_id; u32 chip_id;
/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
...@@ -6512,6 +6517,7 @@ struct bnx2 { ...@@ -6512,6 +6517,7 @@ struct bnx2 {
#define CHIP_ID_5708_A0 0x57080000 #define CHIP_ID_5708_A0 0x57080000
#define CHIP_ID_5708_B0 0x57081000 #define CHIP_ID_5708_B0 0x57081000
#define CHIP_ID_5708_B1 0x57081010 #define CHIP_ID_5708_B1 0x57081010
#define CHIP_ID_5709_A0 0x57090000
#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf) #define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册