提交 ae73bd59 编写于 作者: N nongli1031@gmail.com

modify format


git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1844 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 08f25161
......@@ -15,12 +15,12 @@
/**
* @addtogroup sam7s
*/
/*@{*/
#include <rtthread.h>
/*@{*/
#include <rtthread.h>
int rt_application_init()
{
return 0;
return 0;
}
/*@}*/
......@@ -11,7 +11,7 @@
* Date Author Notes
* 2006-08-23 Bernard first implementation
*
* 2011-12-17 nl1031 for MacroBlaze
* 2011-12-17 nl1031 for MicroBlaze
*
*/
......@@ -39,17 +39,15 @@
#define RS232_DEVICE_ID XPAR_USB_UART_DEVICE_ID
#ifdef RT_USING_UART1
#define USB_UART_BASE ((struct uartport *)XPAR_USB_UART_BASEADDR)
#define USB_UART_BASE ((struct uartport *)XPAR_USB_UART_BASEADDR)
#endif
/* Global Variables: */
XTmrCtr timer; /* The instance of the timer */
XGpio gpio_output; /* The driver instance for GPIO Device configured as O/P */
XUartLite uart_lite; /* Instance of the UartLite device */
XIntc int_ctl; /* The instance of the Interrupt Controller */
static rt_uint32_t led_data;
XTmrCtr timer; /* The instance of the timer */
XGpio gpio_output; /* The driver instance for GPIO Device configured as O/P */
XUartLite uart_lite; /* Instance of the UartLite device */
XIntc int_ctl; /* The instance of the Interrupt Controller */
static rt_uint32_t led_data;
static void rt_hw_board_led_init(void);
......@@ -58,22 +56,22 @@ static void rt_hw_board_led_init(void);
*/
static void rt_hw_board_led_init()
{
rt_uint32_t status;
led_data = 0;
status = XGpio_Initialize(&gpio_output, LEDS_DEVICE_ID);
if (status != XST_SUCCESS)
{
return;
}
/*
* Set the direction for all signals to be outputs
*/
XGpio_SetDataDirection(&gpio_output, 1, 0x0);
/*
* Set the GPIO outputs to high
*/
XGpio_DiscreteWrite(&gpio_output, 1, 3);
rt_uint32_t status;
led_data = 0;
status = XGpio_Initialize(&gpio_output, LEDS_DEVICE_ID);
if (status != XST_SUCCESS)
{
return;
}
/*
* Set the direction for all signals to be outputs
*/
XGpio_SetDataDirection(&gpio_output, 1, 0x0);
/*
* Set the GPIO outputs to high
*/
XGpio_DiscreteWrite(&gpio_output, 1, 3);
}
/**
......@@ -83,8 +81,8 @@ static void rt_hw_board_led_init()
*/
void rt_hw_board_led_on(rt_uint32_t led)
{
led_data |= led;
XGpio_DiscreteWrite(&gpio_output, 1, led_data);
led_data |= led;
XGpio_DiscreteWrite(&gpio_output, 1, led_data);
}
/**
......@@ -94,23 +92,21 @@ void rt_hw_board_led_on(rt_uint32_t led)
*/
void rt_hw_board_led_off(rt_uint32_t led)
{
led_data &= ~led;
XGpio_DiscreteWrite(&gpio_output, 1, led_data);
led_data &= ~led;
XGpio_DiscreteWrite(&gpio_output, 1, led_data);
}
void rt_hw_led_flash(void)
{
rt_uint32_t i;
rt_uint32_t i;
rt_hw_board_led_off(1);
for (i = 0; i < 20000; i ++);
rt_hw_board_led_off(1);
for (i = 0; i < 20000; i++) ;
rt_hw_board_led_on(1);
for (i = 0; i < 20000; i ++);
rt_hw_board_led_on(1);
for (i = 0; i < 20000; i++) ;
}
#ifdef RT_USING_CONSOLE
/*
......@@ -124,109 +120,107 @@ void rt_hw_led_flash(void)
*/
void rt_hw_console_output(const char* str)
{
while (*str)
{
/* Transmit Character */
XUartLite_SendByte(STDOUT_BASEADDRESS, *str);
if (*str == '\n')
XUartLite_SendByte(STDOUT_BASEADDRESS, '\r');
str++;
}
while (*str)
{
/* Transmit Character */
XUartLite_SendByte(STDOUT_BASEADDRESS, *str);
if (*str == '\n')
XUartLite_SendByte(STDOUT_BASEADDRESS, '\r');
str++;
}
}
static void rt_hw_console_init()
{
rt_uint32_t status;
rt_uint32_t status;
/*
* Initialize the UartLite driver so that it is ready to use.
*/
status = XUartLite_Initialize(&uart_lite, RS232_DEVICE_ID);
if (status != XST_SUCCESS)
{
return;
}
/*
* Initialize the UartLite driver so that it is ready to use.
*/
status = XUartLite_Initialize(&uart_lite, RS232_DEVICE_ID);
if (status != XST_SUCCESS)
{
return;
}
}
#endif
void rt_hw_timer_handler(void)
{
rt_uint32_t csr;
csr = XTmrCtr_ReadReg(timer.BaseAddress, TIMER_CNTR_0, XTC_TCSR_OFFSET);
/*
* Check if timer expired and interrupt occured
*/
if (csr & XTC_CSR_INT_OCCURED_MASK)
{
rt_tick_increase();
XTmrCtr_WriteReg(timer.BaseAddress, TIMER_CNTR_0, XTC_TCSR_OFFSET, csr | XTC_CSR_INT_OCCURED_MASK);
}
rt_uint32_t csr;
csr = XTmrCtr_ReadReg(timer.BaseAddress, TIMER_CNTR_0, XTC_TCSR_OFFSET);
/*
* Check if timer expired and interrupt occured
*/
if (csr & XTC_CSR_INT_OCCURED_MASK)
{
rt_tick_increase();
XTmrCtr_WriteReg(timer.BaseAddress, TIMER_CNTR_0, XTC_TCSR_OFFSET, csr | XTC_CSR_INT_OCCURED_MASK);
}
}
/*
*********************************************************************************************************
* rt_intc_init()
*
* Description: This function intializes the interrupt controller by registering the appropriate handler
* functions and enabling interrupts.
*
* Arguments : None
*
* Returns : None
*********************************************************************************************************
*/
void rt_intc_init (void)
*********************************************************************************************************
* rt_intc_init()
*
* Description: This function intializes the interrupt controller by registering the appropriate handler
* functions and enabling interrupts.
*
* Arguments : None
*
* Returns : None
*********************************************************************************************************
*/
void rt_intc_init(void)
{
XStatus status;
XStatus status;
XIntc_MasterDisable(XPAR_INTC_0_BASEADDR);
status = XIntc_Initialize(&int_ctl, XPAR_INTC_0_DEVICE_ID);
/* install interrupt handler */
rt_hw_interrupt_install(XPAR_INTC_0_TMRCTR_0_VEC_ID, (rt_isr_handler_t)rt_hw_timer_handler, RT_NULL);
rt_hw_interrupt_umask(XPAR_INTC_0_TMRCTR_0_VEC_ID);
/* install interrupt handler */
rt_hw_interrupt_install(XPAR_INTC_0_TMRCTR_0_VEC_ID, (rt_isr_handler_t) rt_hw_timer_handler, RT_NULL);
XIntc_Start(&int_ctl, XIN_REAL_MODE);
rt_hw_interrupt_umask(XPAR_INTC_0_TMRCTR_0_VEC_ID);
}
XIntc_Start(&int_ctl, XIN_REAL_MODE);
}
void rt_tmr_init (void)
void rt_tmr_init(void)
{
rt_uint32_t ctl;
XStatus status;
rt_uint32_t ctl;
XStatus status;
status = XTmrCtr_Initialize(&timer,XPAR_AXI_TIMER_0_DEVICE_ID);
XTmrCtr_WriteReg(timer.BaseAddress, TIMER_CNTR_0, XTC_TLR_OFFSET, PIV);
ctl = XTC_CSR_ENABLE_TMR_MASK | XTC_CSR_ENABLE_INT_MASK | XTC_CSR_AUTO_RELOAD_MASK | XTC_CSR_DOWN_COUNT_MASK;
XTmrCtr_WriteReg(timer.BaseAddress, TIMER_CNTR_0, XTC_TCSR_OFFSET, ctl);
}
status = XTmrCtr_Initialize(&timer, XPAR_AXI_TIMER_0_DEVICE_ID);
XTmrCtr_WriteReg(timer.BaseAddress, TIMER_CNTR_0, XTC_TLR_OFFSET, PIV);
ctl = XTC_CSR_ENABLE_TMR_MASK | XTC_CSR_ENABLE_INT_MASK | XTC_CSR_AUTO_RELOAD_MASK | XTC_CSR_DOWN_COUNT_MASK;
XTmrCtr_WriteReg(timer.BaseAddress, TIMER_CNTR_0, XTC_TCSR_OFFSET, ctl);
}
/**
* This function will initial SPARTAN 6 LX9 board.
*/
void rt_hw_board_init()
{
/* init hardware console */
rt_hw_console_init();
/* init hardware console */
rt_hw_console_init();
/* init led */
rt_hw_board_led_init();
/* init led */
rt_hw_board_led_init();
/* init intc */
/* init intc */
rt_intc_init();
/* timer init */
rt_tmr_init();
}
......@@ -13,7 +13,6 @@
#define __BOARD_H__
#define MCK 50000000
void rt_hw_board_led_on(rt_uint32_t);
void rt_hw_board_led_off(rt_uint32_t);
......
......@@ -16,7 +16,6 @@
/* Tick per Second*/
#define RT_TICK_PER_SECOND 100
/* SECTION: RT_DEBUG */
/* Thread Debug*/
/* #define RT_THREAD_DEBUG */
......@@ -89,7 +88,6 @@
#define FINSH_THREAD_STACK_SIZE 8192
#define RT_USING_TC
/* SECTION: a runtime libc library */
/* a runtime libc library*/
/* #define RT_USING_NEWLIB */
......
......@@ -16,105 +16,103 @@
#include <rthw.h>
#include <rtthread.h>
//#include <AT91SAM7S.h>
#include "board.h"
#include "board.h"
#ifdef RT_USING_FINSH
#include <finsh.h>
extern void finsh_system_init(void);
#endif
#ifdef RT_USING_FINSH
#include <finsh.h>
extern void finsh_system_init(void);
#endif
extern void rt_hw_led_flash(void);
/*@{*/
#ifdef __CC_ARM
extern int Image$$RW_IRAM1$$ZI$$Limit;
#endif
#ifdef __CC_ARM
extern int Image$$RW_IRAM1$$ZI$$Limit;
#endif
#ifdef __GNUC__
extern unsigned char __bss_start;
extern unsigned char __bss_end;
#endif
#endif
extern void rt_hw_interrupt_init(void);
extern int rt_application_init(void);
#ifdef RT_USING_DEVICE
extern rt_err_t rt_hw_serial_init(void);
#endif
extern int rt_application_init(void);
#ifdef RT_USING_DEVICE
extern rt_err_t rt_hw_serial_init(void);
#endif
/**
* This function will startup RT-Thread RTOS.
*/
void rtthread_startup(void)
{
/* init hardware interrupt */
rt_hw_interrupt_init();
/* init hardware interrupt */
rt_hw_interrupt_init();
/* init board */
rt_hw_board_init();
rt_show_version();
/* init board */
rt_hw_board_init();
/* init tick */
rt_system_tick_init();
rt_show_version();
/* init kernel object */
rt_system_object_init();
/* init tick */
rt_system_tick_init();
/* init timer system */
rt_system_timer_init();
/* init kernel object */
rt_system_object_init();
#ifdef RT_USING_HEAP
#ifdef __CC_ARM
rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)0x204000);
#elif __ICCARM__
rt_system_heap_init(__segment_end("HEAP"), (void*)0x204000);
#else
rt_system_heap_init((void*)&__bss_end, (void*)(&__bss_end+0x4000));
#endif
#endif
/* init timer system */
rt_system_timer_init();
/* init scheduler system */
rt_system_scheduler_init();
#ifdef RT_USING_HEAP
#ifdef __CC_ARM
rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)0x204000);
#elif __ICCARM__
rt_system_heap_init(__segment_end("HEAP"), (void*)0x204000);
#else
rt_system_heap_init((void*) &__bss_end, (void*) (&__bss_end + 0x4000));
#endif
#endif
/* init scheduler system */
rt_system_scheduler_init();
#ifdef RT_USING_HOOK /* if the hook is used */
/* set idle thread hook */
rt_thread_idle_sethook(rt_hw_led_flash);
#endif
/* set idle thread hook */
rt_thread_idle_sethook(rt_hw_led_flash);
#endif
//#ifdef RT_USING_DEVICE
/* init hardware serial device */
rt_hw_serial_init();
/* init all device */
rt_device_init_all();
//#endif
#ifdef RT_USING_DEVICE
/* init hardware serial device */
rt_hw_serial_init();
/* init all device */
rt_device_init_all();
#endif
/* init application */
rt_application_init();
/* init application */
rt_application_init();
#ifdef RT_USING_FINSH
/* init finsh */
finsh_system_init();
finsh_set_device("uart1");
/* init finsh */
finsh_system_init();
finsh_set_device("uart1");
#endif
/* init idle thread */
rt_thread_idle_init();
/* init idle thread */
rt_thread_idle_init();
/* start scheduler */
rt_system_scheduler_start();
/* start scheduler */
rt_system_scheduler_start();
/* never reach here */
return;
}
/* never reach here */
return ;
}
int main(void)
{
/* invoke rtthread_startup */
rtthread_startup();
int main (void)
{
/* invoke rtthread_startup */
rtthread_startup();
return 0;
}
return 0;
}
/*@}*/
......@@ -13,7 +13,7 @@
*
*/
#include "microbalze.inc"
#include "microblaze.inc"
.text
.globl rt_interrupt_enter
......
......@@ -22,23 +22,23 @@
typedef volatile rt_uint32_t REG32;
struct rt_mb_uart_lite_hw
{
REG32 Rx_FIFO; // Receiver Holding Register
REG32 Tx_FIFO; // Transmitter Holding Register
REG32 STAT_REG; // Channel Status Register
REG32 CTRL_REG; // Control Register
REG32 Rx_FIFO; // Receiver Holding Register
REG32 Tx_FIFO; // Transmitter Holding Register
REG32 STAT_REG; // Channel Status Register
REG32 CTRL_REG; // Control Register
};
struct rt_mb_uart_lite
{
struct rt_device parent;
struct rt_device parent;
struct rt_mb_uart_lite_hw* hw_base;
rt_uint16_t peripheral_id;
rt_uint32_t baudrate;
struct rt_mb_uart_lite_hw* hw_base;
rt_uint16_t peripheral_id;
rt_uint32_t baudrate;
/* reception field */
rt_uint16_t save_index, read_index;
rt_uint8_t rx_buffer[RT_UART_RX_BUFFER_SIZE];
/* reception field */
rt_uint16_t save_index, read_index;
rt_uint8_t rx_buffer[RT_UART_RX_BUFFER_SIZE];
};
#ifdef RT_USING_UART1
struct rt_mb_uart_lite serial1;
......@@ -46,265 +46,263 @@ struct rt_mb_uart_lite serial1;
static void rt_hw_serial_isr(void)
{
unsigned int status;
rt_base_t level;
struct rt_device* device;
struct rt_mb_uart_lite* serial = RT_NULL;
unsigned int status;
rt_base_t level;
struct rt_device* device;
struct rt_mb_uart_lite* serial = RT_NULL;
#ifdef RT_USING_UART1
/* serial 1 */
serial = &serial1;
/* serial 1 */
serial = &serial1;
#endif
RT_ASSERT(serial != RT_NULL);
/* get generic device object */
device = (rt_device_t)serial;
/* disable interrupt */
level = rt_hw_interrupt_disable();
/* get uart status register */
status = serial->hw_base->STAT_REG;
while (status & XUL_SR_RX_FIFO_VALID_DATA)
{
/* get received character */
serial->rx_buffer[serial->save_index] = serial->hw_base->Rx_FIFO;
/* move to next position */
serial->save_index ++;
if (serial->save_index >= RT_UART_RX_BUFFER_SIZE)
serial->save_index = 0;
/* if the next position is read index, discard this 'read char' */
if (serial->save_index == serial->read_index)
{
serial->read_index ++;
if (serial->read_index >= RT_UART_RX_BUFFER_SIZE)
serial->read_index = 0;
}
status = serial->hw_base->STAT_REG;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
/* indicate to upper layer application */
if (device->rx_indicate != RT_NULL)
device->rx_indicate(device, 1);
RT_ASSERT(serial != RT_NULL);
/* get generic device object */
device = (rt_device_t) serial;
/* disable interrupt */
level = rt_hw_interrupt_disable();
/* get uart status register */
status = serial->hw_base->STAT_REG;
while (status & XUL_SR_RX_FIFO_VALID_DATA)
{
/* get received character */
serial->rx_buffer[serial->save_index] = serial->hw_base->Rx_FIFO;
/* move to next position */
serial->save_index++;
if (serial->save_index >= RT_UART_RX_BUFFER_SIZE)
serial->save_index = 0;
/* if the next position is read index, discard this 'read char' */
if (serial->save_index == serial->read_index)
{
serial->read_index++;
if (serial->read_index >= RT_UART_RX_BUFFER_SIZE)
serial->read_index = 0;
}
status = serial->hw_base->STAT_REG;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
/* indicate to upper layer application */
if (device->rx_indicate != RT_NULL)
device->rx_indicate(device, 1);
}
static rt_err_t rt_serial_init (rt_device_t dev)
static rt_err_t rt_serial_init(rt_device_t dev)
{
struct rt_mb_uart_lite* serial = (struct rt_mb_uart_lite*) dev;
struct rt_mb_uart_lite* serial = (struct rt_mb_uart_lite*) dev;
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(serial->peripheral_id != XPAR_INTC_0_UARTLITE_1_VEC_ID);
RT_ASSERT(serial->peripheral_id != XPAR_INTC_0_UARTLITE_1_VEC_ID);
// serial->hw_base->CTRL_REG = XUL_CR_FIFO_RX_RESET | /* Reset Receiver */
// XUL_CR_FIFO_TX_RESET; /* Reset Transmitter */
/* reset rx index */
serial->save_index = 0;
serial->read_index = 0;
/* reset rx index */
serial->save_index = 0;
serial->read_index = 0;
/* reset rx buffer */
rt_memset(serial->rx_buffer, 0, RT_UART_RX_BUFFER_SIZE);
/* reset rx buffer */
rt_memset(serial->rx_buffer, 0, RT_UART_RX_BUFFER_SIZE);
return RT_EOK;
return RT_EOK;
}
static rt_err_t rt_serial_open(rt_device_t dev, rt_uint16_t oflag)
{
struct rt_mb_uart_lite *serial = (struct rt_mb_uart_lite*)dev;
RT_ASSERT(serial != RT_NULL);
struct rt_mb_uart_lite *serial = (struct rt_mb_uart_lite*) dev;
RT_ASSERT(serial != RT_NULL);
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* enable UART rx interrupt */
serial->hw_base->CTRL_REG = XUL_CR_ENABLE_INTR; /* enable interrupt */
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* enable UART rx interrupt */
serial->hw_base->CTRL_REG = XUL_CR_ENABLE_INTR; /* enable interrupt */
/* install UART handler */
rt_hw_interrupt_install(serial->peripheral_id, (rt_isr_handler_t)rt_hw_serial_isr, RT_NULL);
rt_hw_interrupt_umask(serial->peripheral_id);
}
/* install UART handler */
rt_hw_interrupt_install(serial->peripheral_id, (rt_isr_handler_t) rt_hw_serial_isr, RT_NULL);
rt_hw_interrupt_umask(serial->peripheral_id);
}
return RT_EOK;
return RT_EOK;
}
static rt_err_t rt_serial_close(rt_device_t dev)
{
struct rt_mb_uart_lite *serial = (struct rt_mb_uart_lite*)dev;
RT_ASSERT(serial != RT_NULL);
struct rt_mb_uart_lite *serial = (struct rt_mb_uart_lite*) dev;
RT_ASSERT(serial != RT_NULL);
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* disable interrupt */
serial->hw_base->CTRL_REG = 0; /* RxReady interrupt */
}
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* disable interrupt */
serial->hw_base->CTRL_REG = 0; /* RxReady interrupt */
}
return RT_EOK;
return RT_EOK;
}
static rt_size_t rt_serial_read (rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
static rt_size_t rt_serial_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
rt_uint8_t* ptr;
struct rt_mb_uart_lite *serial = (struct rt_mb_uart_lite*)dev;
RT_ASSERT(serial != RT_NULL);
/* point to buffer */
ptr = (rt_uint8_t*) buffer;
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
while (size)
{
/* interrupt receive */
rt_base_t level;
/* disable interrupt */
level = rt_hw_interrupt_disable();
if (serial->read_index != serial->save_index)
{
*ptr = serial->rx_buffer[serial->read_index];
serial->read_index ++;
if (serial->read_index >= RT_UART_RX_BUFFER_SIZE)
serial->read_index = 0;
}
else
{
/* no data in rx buffer */
/* enable interrupt */
rt_hw_interrupt_enable(level);
break;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
ptr ++; size --;
}
return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
}
else if (dev->flag & RT_DEVICE_FLAG_DMA_RX)
{
/* not support right now */
RT_ASSERT(0);
}
else
{
/* poll mode */
while (size)
{
/* Wait for Full Rx Buffer */
while (!(serial->hw_base->STAT_REG & XUL_SR_RX_FIFO_VALID_DATA));
/* Read Character */
*ptr = serial->hw_base->Rx_FIFO;
ptr ++;
size --;
}
return (rt_size_t)ptr - (rt_size_t)buffer;
}
return 0;
rt_uint8_t* ptr;
struct rt_mb_uart_lite *serial = (struct rt_mb_uart_lite*) dev;
RT_ASSERT(serial != RT_NULL);
/* point to buffer */
ptr = (rt_uint8_t*) buffer;
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
while (size)
{
/* interrupt receive */
rt_base_t level;
/* disable interrupt */
level = rt_hw_interrupt_disable();
if (serial->read_index != serial->save_index)
{
*ptr = serial->rx_buffer[serial->read_index];
serial->read_index++;
if (serial->read_index >= RT_UART_RX_BUFFER_SIZE)
serial->read_index = 0;
} else
{
/* no data in rx buffer */
/* enable interrupt */
rt_hw_interrupt_enable(level);
break;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
ptr++;
size--;
}
return (rt_uint32_t) ptr - (rt_uint32_t) buffer;
} else if (dev->flag & RT_DEVICE_FLAG_DMA_RX)
{
/* not support right now */
RT_ASSERT(0);
} else
{
/* poll mode */
while (size)
{
/* Wait for Full Rx Buffer */
while (!(serial->hw_base->STAT_REG & XUL_SR_RX_FIFO_VALID_DATA))
;
/* Read Character */
*ptr = serial->hw_base->Rx_FIFO;
ptr++;
size--;
}
return (rt_size_t) ptr - (rt_size_t) buffer;
}
return 0;
}
static rt_size_t rt_serial_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
static rt_size_t rt_serial_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
rt_uint8_t* ptr;
struct rt_mb_uart_lite *serial = (struct rt_mb_uart_lite*)dev;
RT_ASSERT(serial != RT_NULL);
ptr = (rt_uint8_t*) buffer;
if (dev->open_flag & RT_DEVICE_OFLAG_WRONLY)
{
if (dev->flag & RT_DEVICE_FLAG_STREAM)
{
/* it's a stream mode device */
while (size)
{
/* stream mode */
if (*ptr == '\n')
{
while (!(serial->hw_base->STAT_REG & XUL_SR_TX_FIFO_EMPTY));
serial->hw_base->Tx_FIFO = '\r';
}
/* Wait for Empty Tx Buffer */
while (!(serial->hw_base->STAT_REG & XUL_SR_TX_FIFO_EMPTY));
/* Transmit Character */
serial->hw_base->Tx_FIFO = *ptr;
ptr ++; size --;
}
}
else
{
while (size)
{
/* Wait for Empty Tx Buffer */
while (!(serial->hw_base->STAT_REG & XUL_SR_TX_FIFO_EMPTY));
/* Transmit Character */
serial->hw_base->Tx_FIFO = *ptr;
ptr ++; size --;
}
}
}
return (rt_size_t)ptr - (rt_size_t)buffer;
rt_uint8_t* ptr;
struct rt_mb_uart_lite *serial = (struct rt_mb_uart_lite*) dev;
RT_ASSERT(serial != RT_NULL);
ptr = (rt_uint8_t*) buffer;
if (dev->open_flag & RT_DEVICE_OFLAG_WRONLY)
{
if (dev->flag & RT_DEVICE_FLAG_STREAM)
{
/* it's a stream mode device */
while (size)
{
/* stream mode */
if (*ptr == '\n')
{
while (!(serial->hw_base->STAT_REG & XUL_SR_TX_FIFO_EMPTY))
;
serial->hw_base->Tx_FIFO = '\r';
}
/* Wait for Empty Tx Buffer */
while (!(serial->hw_base->STAT_REG & XUL_SR_TX_FIFO_EMPTY)) ;
/* Transmit Character */
serial->hw_base->Tx_FIFO = *ptr;
ptr++;
size--;
}
}
else
{
while (size)
{
/* Wait for Empty Tx Buffer */
while (!(serial->hw_base->STAT_REG & XUL_SR_TX_FIFO_EMPTY))
;
/* Transmit Character */
serial->hw_base->Tx_FIFO = *ptr;
ptr++;
size--;
}
}
}
return (rt_size_t) ptr - (rt_size_t) buffer;
}
static rt_err_t rt_serial_control (rt_device_t dev, rt_uint8_t cmd, void *args)
static rt_err_t rt_serial_control(rt_device_t dev, rt_uint8_t cmd, void *args)
{
return RT_EOK;
return RT_EOK;
}
rt_err_t rt_hw_serial_init()
{
rt_device_t device;
rt_device_t device;
#ifndef RT_USING_CONSOLE
int Status;
int Status;
/*
* Initialize the UartLite driver so that it is ready to use.
*/
Status = XUartLite_Initialize(&uart_lite, RS232_DEVICE_ID);
if (Status != XST_SUCCESS)
{
return;
}
/*
* Initialize the UartLite driver so that it is ready to use.
*/
Status = XUartLite_Initialize(&uart_lite, RS232_DEVICE_ID);
if (Status != XST_SUCCESS)
{
return;
}
#endif
#ifdef RT_USING_UART1
device = (rt_device_t) &serial1;
/* init serial device private data */
serial1.hw_base = (struct rt_mb_uart_lite_hw*)XPAR_USB_UART_BASEADDR;
serial1.peripheral_id = XPAR_INTC_0_UARTLITE_1_VEC_ID;
serial1.baudrate = 9600;
/* set device virtual interface */
device->init = rt_serial_init;
device->open = rt_serial_open;
device->close = rt_serial_close;
device->read = rt_serial_read;
device->write = rt_serial_write;
device->control = rt_serial_control;
/* register uart1 on device subsystem */
rt_device_register(device, "uart1", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
device = (rt_device_t) &serial1;
/* init serial device private data */
serial1.hw_base = (struct rt_mb_uart_lite_hw*) XPAR_USB_UART_BASEADDR;
serial1.peripheral_id = XPAR_INTC_0_UARTLITE_1_VEC_ID;
serial1.baudrate = 9600;
/* set device virtual interface */
device->init = rt_serial_init;
device->open = rt_serial_open;
device->close = rt_serial_close;
device->read = rt_serial_read;
device->write = rt_serial_write;
device->control = rt_serial_control;
/* register uart1 on device subsystem */
rt_device_register(device, "uart1", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
#endif
return RT_EOK;
return RT_EOK;
}
......@@ -13,10 +13,8 @@
*
*/
#include <rtthread.h>
extern void *_SDA_BASE_;
extern void *_SDA2_BASE_;
extern void *_SDA_BASE_;
extern void *_SDA2_BASE_;
/**
* This function will initialize thread stack
......@@ -28,44 +26,43 @@ extern void *_SDA2_BASE_;
*
* @return stack address
*/
rt_uint8_t *rt_hw_stack_init(void *tentry, void *parameter,
rt_uint8_t *stack_addr, void *texit)
rt_uint8_t *rt_hw_stack_init(void *tentry, void *parameter, rt_uint8_t *stack_addr, void *texit)
{
unsigned long *stk;
unsigned long *stk;
stk = (unsigned long *)stack_addr;
stk--;
stk--;
*stk-- = 0; /* r31 */
*stk-- = 0; /* r30 */
*stk-- = 0; /* r29 */
*stk-- = 0; /* r28 */
*stk-- = 0; /* r27 */
*stk-- = 0; /* r26 */
*stk-- = 0; /* r25 */
*stk-- = 0; /* r24 */
*stk-- = 0; /* r23 */
*stk-- = 0; /* r22 */
*stk-- = 0; /* r21 */
*stk-- = 0; /* r20 */
*stk-- = 0; /* r19 */
*stk-- = 0; /* r18 */
*stk-- = 0; /* r17 */
*stk-- = (unsigned long)texit; /* r15 = task return address*/
*stk-- = (unsigned long)tentry; /* r14 = entry address*/
*stk-- = (unsigned long)&_SDA_BASE_; /* r13 */
*stk-- = 0; /* r12 */
*stk-- = 0; /* r11 */
*stk-- = 0; /* r10 */
*stk-- = 0; /* r09 */
*stk-- = 0; /* r08 */
*stk-- = 0; /* r07 */
*stk-- = 0; /* r06 */
*stk-- = (unsigned long) parameter; /* r05 */
*stk-- = 0; /* r04 */
*stk-- = 0; /* r03 */
*stk-- = (unsigned long)&_SDA2_BASE_; /* r02 */
*stk = 2; /* enable interrupt */
return (rt_uint8_t *)stk;
stk = (unsigned long *) stack_addr;
stk--;
stk--;
*stk-- = 0; /* r31 */
*stk-- = 0; /* r30 */
*stk-- = 0; /* r29 */
*stk-- = 0; /* r28 */
*stk-- = 0; /* r27 */
*stk-- = 0; /* r26 */
*stk-- = 0; /* r25 */
*stk-- = 0; /* r24 */
*stk-- = 0; /* r23 */
*stk-- = 0; /* r22 */
*stk-- = 0; /* r21 */
*stk-- = 0; /* r20 */
*stk-- = 0; /* r19 */
*stk-- = 0; /* r18 */
*stk-- = 0; /* r17 */
*stk-- = (unsigned long) texit; /* r15 = task return address*/
*stk-- = (unsigned long) tentry; /* r14 = entry address*/
*stk-- = (unsigned long) &_SDA_BASE_; /* r13 */
*stk-- = 0; /* r12 */
*stk-- = 0; /* r11 */
*stk-- = 0; /* r10 */
*stk-- = 0; /* r09 */
*stk-- = 0; /* r08 */
*stk-- = 0; /* r07 */
*stk-- = 0; /* r06 */
*stk-- = (unsigned long) parameter; /* r05 */
*stk-- = 0; /* r04 */
*stk-- = 0; /* r03 */
*stk-- = (unsigned long) &_SDA2_BASE_; /* r02 */
*stk = 2; /* enable interrupt */
return (rt_uint8_t *) stk;
}
......@@ -20,20 +20,17 @@
#include "xintc_i.h"
#include "xintc_l.h"
#define MAX_HANDLERS XPAR_INTC_MAX_NUM_INTR_INPUTS
extern XIntc int_ctl; /* The instance of the Interrupt Controller */
extern rt_uint32_t rt_interrupt_nest;
rt_uint32_t rt_interrupt_from_thread, rt_interrupt_to_thread;
rt_uint32_t rt_thread_switch_interrupt_flag;
void rt_hw_interrupt_handler(int vector)
{
rt_kprintf("Unhandled interrupt %d occured!!!\n", vector);
rt_kprintf("Unhandled interrupt %d occured!!!\n", vector);
}
/**
......@@ -41,24 +38,22 @@ void rt_hw_interrupt_handler(int vector)
*/
void rt_hw_interrupt_init()
{
rt_base_t index;
XIntc_Config *CfgPtr;
rt_base_t index;
XIntc_Config *CfgPtr;
CfgPtr = &XIntc_ConfigTable[0];
for (index = 0; index < MAX_HANDLERS; index++)
{
CfgPtr->HandlerTable[index].Handler = (XInterruptHandler) rt_hw_interrupt_handler;
}
for (index = 0; index < MAX_HANDLERS; index ++)
{
CfgPtr->HandlerTable[index].Handler = (XInterruptHandler)rt_hw_interrupt_handler;
}
/* init interrupt nest, and context in thread sp */
rt_interrupt_nest = 0;
rt_interrupt_from_thread = 0;
rt_interrupt_to_thread = 0;
rt_thread_switch_interrupt_flag = 0;
/* init interrupt nest, and context in thread sp */
rt_interrupt_nest = 0;
rt_interrupt_from_thread = 0;
rt_interrupt_to_thread = 0;
rt_thread_switch_interrupt_flag = 0;
}
/**
......@@ -67,8 +62,8 @@ void rt_hw_interrupt_init()
*/
void rt_hw_interrupt_mask(int vector)
{
/* disable interrupt */
XIntc_Disable(&int_ctl,vector);
/* disable interrupt */
XIntc_Disable(&int_ctl, vector);
}
/**
......@@ -77,7 +72,7 @@ void rt_hw_interrupt_mask(int vector)
*/
void rt_hw_interrupt_umask(int vector)
{
XIntc_Enable(&int_ctl,vector);
XIntc_Enable(&int_ctl, vector);
}
/**
......@@ -88,124 +83,123 @@ void rt_hw_interrupt_umask(int vector)
*/
void rt_hw_interrupt_install(int vector, rt_isr_handler_t new_handler, rt_isr_handler_t *old_handler)
{
XIntc_Config *CfgPtr;
XIntc_Config *CfgPtr;
CfgPtr = &XIntc_ConfigTable[0];
if(vector >= 0 && vector < MAX_HANDLERS)
{
if (*old_handler != RT_NULL) *old_handler = (rt_isr_handler_t)CfgPtr->HandlerTable[vector].Handler;
if (new_handler != RT_NULL) CfgPtr->HandlerTable[vector].Handler = (XInterruptHandler)new_handler;
}
if (vector >= 0 && vector < MAX_HANDLERS)
{
if (*old_handler != RT_NULL)
*old_handler = (rt_isr_handler_t) CfgPtr->HandlerTable[vector].Handler;
if (new_handler != RT_NULL)
CfgPtr->HandlerTable[vector].Handler = (XInterruptHandler) new_handler;
}
}
/*****************************************************************************/
/** copy from XIntc_DeviceInterruptHandler in xintc_l.c nl1031
*
* This function is the primary interrupt handler for the driver. It must be
* connected to the interrupt source such that is called when an interrupt of
* the interrupt controller is active. It will resolve which interrupts are
* active and enabled and call the appropriate interrupt handler. It uses
* the AckBeforeService flag in the configuration data to determine when to
* acknowledge the interrupt. Highest priority interrupts are serviced first.
* The driver can be configured to service only the highest priority interrupt
* or all pending interrupts using the {XIntc_SetOptions()} function or
* the {XIntc_SetIntrSrvOption()} function.
*
* This function assumes that an interrupt vector table has been previously
* initialized. It does not verify that entries in the table are valid before
* calling an interrupt handler.
*
*
* @return None.
*
* @note
*
* The constant XPAR_INTC_MAX_NUM_INTR_INPUTS must be setup for this to compile.
* Interrupt IDs range from 0 - 31 and correspond to the interrupt input signals
* for the interrupt controller. XPAR_INTC_MAX_NUM_INTR_INPUTS specifies the
* highest numbered interrupt input signal that is used.
*
******************************************************************************/
void rt_hw_trap_irq(void )
*
* This function is the primary interrupt handler for the driver. It must be
* connected to the interrupt source such that is called when an interrupt of
* the interrupt controller is active. It will resolve which interrupts are
* active and enabled and call the appropriate interrupt handler. It uses
* the AckBeforeService flag in the configuration data to determine when to
* acknowledge the interrupt. Highest priority interrupts are serviced first.
* The driver can be configured to service only the highest priority interrupt
* or all pending interrupts using the {XIntc_SetOptions()} function or
* the {XIntc_SetIntrSrvOption()} function.
*
* This function assumes that an interrupt vector table has been previously
* initialized. It does not verify that entries in the table are valid before
* calling an interrupt handler.
*
*
* @return None.
*
* @note
*
* The constant XPAR_INTC_MAX_NUM_INTR_INPUTS must be setup for this to compile.
* Interrupt IDs range from 0 - 31 and correspond to the interrupt input signals
* for the interrupt controller. XPAR_INTC_MAX_NUM_INTR_INPUTS specifies the
* highest numbered interrupt input signal that is used.
*
******************************************************************************/
void rt_hw_trap_irq(void)
{
u32 intr_status;
u32 intr_mask = 1;
int intr_number;
volatile u32 reg; /* used as bit bucket */
XIntc_Config *cfg_ptr;
/* Get the configuration data using the device ID */
cfg_ptr = &XIntc_ConfigTable[0];
/* Get the interrupts that are waiting to be serviced */
intr_status = XIntc_GetIntrStatus(XPAR_INTC_0_BASEADDR);
/* Service each interrupt that is active and enabled by checking each
* bit in the register from LSB to MSB which corresponds to an interrupt
* intput signal
*/
for (intr_number = 0; intr_number < XPAR_INTC_MAX_NUM_INTR_INPUTS; intr_number++)
{
if (intr_status & 1)
{
XIntc_VectorTableEntry *table_ptr;
/* If the interrupt has been setup to acknowledge it
* before servicing the interrupt, then ack it
*/
if (cfg_ptr->AckBeforeService & intr_mask)
{
XIntc_AckIntr(cfg_ptr->BaseAddress, intr_mask);
}
/* The interrupt is active and enabled, call the
* interrupt handler that was setup with the specified
* parameter
*/
table_ptr = &(cfg_ptr->HandlerTable[intr_number]);
table_ptr->Handler(table_ptr->CallBackRef);
/* If the interrupt has been setup to acknowledge it
* after it has been serviced then ack it
*/
if ((cfg_ptr->AckBeforeService & intr_mask) == 0)
{
XIntc_AckIntr(cfg_ptr->BaseAddress, intr_mask);
}
/*
* Read the ISR again to handle architectures with posted write
* bus access issues.
*/
reg = XIntc_GetIntrStatus(cfg_ptr->BaseAddress);
/*
* If only the highest priority interrupt is to be
* serviced, exit loop and return after servicing
* the interrupt
*/
if (cfg_ptr->Options == XIN_SVC_SGL_ISR_OPTION)
{
return;
}
}
/* Move to the next interrupt to check */
intr_mask <<= 1;
intr_status >>= 1;
/* If there are no other bits set indicating that all interrupts
* have been serviced, then exit the loop
*/
if (intr_status == 0)
{
break;
}
}
u32 intr_status;
u32 intr_mask = 1;
int intr_number;
volatile u32 reg; /* used as bit bucket */
XIntc_Config *cfg_ptr;
/* Get the configuration data using the device ID */
cfg_ptr = &XIntc_ConfigTable[0];
/* Get the interrupts that are waiting to be serviced */
intr_status = XIntc_GetIntrStatus(XPAR_INTC_0_BASEADDR);
/* Service each interrupt that is active and enabled by checking each
* bit in the register from LSB to MSB which corresponds to an interrupt
* intput signal
*/
for (intr_number = 0; intr_number < XPAR_INTC_MAX_NUM_INTR_INPUTS; intr_number++)
{
if (intr_status & 1)
{
XIntc_VectorTableEntry *table_ptr;
/* If the interrupt has been setup to acknowledge it
* before servicing the interrupt, then ack it
*/
if (cfg_ptr->AckBeforeService & intr_mask)
{
XIntc_AckIntr(cfg_ptr->BaseAddress, intr_mask);
}
/* The interrupt is active and enabled, call the
* interrupt handler that was setup with the specified
* parameter
*/
table_ptr = &(cfg_ptr->HandlerTable[intr_number]);
table_ptr->Handler(table_ptr->CallBackRef);
/* If the interrupt has been setup to acknowledge it
* after it has been serviced then ack it
*/
if ((cfg_ptr->AckBeforeService & intr_mask) == 0)
{
XIntc_AckIntr(cfg_ptr->BaseAddress, intr_mask);
}
/*
* Read the ISR again to handle architectures with posted write
* bus access issues.
*/
reg = XIntc_GetIntrStatus(cfg_ptr->BaseAddress);
/*
* If only the highest priority interrupt is to be
* serviced, exit loop and return after servicing
* the interrupt
*/
if (cfg_ptr->Options == XIN_SVC_SGL_ISR_OPTION)
{
return;
}
}
/* Move to the next interrupt to check */
intr_mask <<= 1;
intr_status >>= 1;
/* If there are no other bits set indicating that all interrupts
* have been serviced, then exit the loop
*/
if (intr_status == 0)
{
break;
}
}
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册