Add customized startup file for stm32f10x when using gcc.

bsp/stm32f10x-HAL/.config

@@ -40,6 +40,7 @@ CONFIG_RT_USING_MEMHEAP=y
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
 # CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set
+# CONFIG_RT_USING_MEMTRACE is not set
 CONFIG_RT_USING_HEAP=y
 
 #
@@ -49,7 +50,7 @@ CONFIG_RT_USING_DEVICE=y
 # CONFIG_RT_USING_INTERRUPT_INFO is not set
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
-CONFIG_RT_CONSOLE_DEVICE_NAME="uart2"
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
 # CONFIG_RT_USING_MODULE is not set
 
 #
@@ -67,7 +68,9 @@ CONFIG_RT_USING_USER_MAIN=y
 # Command shell
 #
 CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
 CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
 CONFIG_FINSH_USING_SYMTAB=y
 CONFIG_FINSH_USING_DESCRIPTION=y
 CONFIG_FINSH_THREAD_PRIORITY=20
@@ -90,6 +93,7 @@ CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_USING_SERIAL=y
 # CONFIG_RT_USING_CAN is not set
 # CONFIG_RT_USING_HWTIMER is not set
+# CONFIG_RT_USING_CPUTIME is not set
 # CONFIG_RT_USING_I2C is not set
 CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_MTD_NOR is not set
@@ -98,6 +102,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_SDIO is not set
 # CONFIG_RT_USING_SPI is not set
 # CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_WIFI is not set
 
 #
 # Using USB
@@ -108,7 +113,7 @@ CONFIG_RT_USING_PIN=y
 #
 # POSIX layer and C standard library
 #
-# CONFIG_RT_USING_LIBC is not set
+CONFIG_RT_USING_LIBC=y
 # CONFIG_RT_USING_PTHREADS is not set
 
 #
@@ -135,6 +140,12 @@ CONFIG_RT_USING_PIN=y
 #
 # CONFIG_RT_USING_VBUS is not set
 
+#
+# Utilities
+#
+# CONFIG_RT_USING_LOGTRACE is not set
+# CONFIG_RT_USING_RYM is not set
+
 #
 # RT-Thread online packages
 #
@@ -144,67 +155,90 @@ CONFIG_RT_USING_PIN=y
 #
 # CONFIG_PKG_USING_PARTITION is not set
 # CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
 
 #
 # IoT - internet of things
 #
-# CONFIG_PKG_USING_CJSON is not set
 # CONFIG_PKG_USING_PAHOMQTT is not set
 # CONFIG_PKG_USING_WEBCLIENT is not set
 # CONFIG_PKG_USING_MONGOOSE is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_NANOPB is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
 
 #
 # security packages
 #
 # CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_libsodium is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
 
 #
 # language packages
 #
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
 
 #
 # multimedia packages
 #
+# CONFIG_PKG_USING_OPENMV is not set
 
 #
 # tools packages
 #
 # CONFIG_PKG_USING_CMBACKTRACE is not set
 # CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_IPERF is not set
 
 #
 # miscellaneous packages
 #
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+
+#
+# example package: hello
+#
 # CONFIG_PKG_USING_HELLO is not set
-# CONFIG_STM32F100C8 is not set
-# CONFIG_STM32F100CB is not set
-# CONFIG_STM32F100R8 is not set
-# CONFIG_STM32F100RB is not set
 # CONFIG_STM32F100RC is not set
 # CONFIG_STM32F100RD is not set
 # CONFIG_STM32F100RE is not set
-# CONFIG_STM32F100V8 is not set
-# CONFIG_STM32F100VB is not set
 # CONFIG_STM32F100VC is not set
 # CONFIG_STM32F100VD is not set
 # CONFIG_STM32F100VE is not set
 # CONFIG_STM32F100ZC is not set
 # CONFIG_STM32F100ZD is not set
 # CONFIG_STM32F100ZE is not set
-# CONFIG_STM32F101C8 is not set
 # CONFIG_STM32F101CB is not set
-# CONFIG_STM32F101R8 is not set
 # CONFIG_STM32F101RB is not set
 # CONFIG_STM32F101RC is not set
 # CONFIG_STM32F101RD is not set
 # CONFIG_STM32F101RE is not set
 # CONFIG_STM32F101RF is not set
 # CONFIG_STM32F101RG is not set
-# CONFIG_STM32F101T8 is not set
 # CONFIG_STM32F101TB is not set
-# CONFIG_STM32F101V8 is not set
 # CONFIG_STM32F101VB is not set
 # CONFIG_STM32F101VC is not set
 # CONFIG_STM32F101VD is not set
@@ -216,15 +250,13 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_STM32F101ZE is not set
 # CONFIG_STM32F101ZF is not set
 # CONFIG_STM32F101ZG is not set
-# CONFIG_STM32F102C8 is not set
 # CONFIG_STM32F102CB is not set
-# CONFIG_STM32F102R8 is not set
 # CONFIG_STM32F102RB is not set
 # CONFIG_STM32F103C8 is not set
 # CONFIG_STM32F103CB is not set
 # CONFIG_STM32F103R8 is not set
-CONFIG_STM32F103RB=y
-# CONFIG_STM32F103RC is not set
+# CONFIG_STM32F103RB is not set
+CONFIG_STM32F103RC=y
 # CONFIG_STM32F103RD is not set
 # CONFIG_STM32F103RE is not set
 # CONFIG_STM32F103RF is not set
@@ -255,7 +287,7 @@ CONFIG_STM32F103RB=y
 # CONFIG_STM32F107VC is not set
 # CONFIG_RT_USING_HSI is not set
 CONFIG_RT_HSE_VALUE=8000000
-CONFIG_STM32F10X_PIN_NUMBERS=64
-# CONFIG_RT_USING_UART1 is not set
-CONFIG_RT_USING_UART2=y
+CONFIG_RT_USING_UART1=y
+# CONFIG_RT_USING_UART2 is not set
 # CONFIG_RT_USING_UART3 is not set
+# CONFIG_RT_USING_SDCARD is not set

bsp/stm32f10x-HAL/drivers/SConscript

@@ -20,6 +20,9 @@ if GetDepend(['RT_USING_USB_DEVICE']):
     src += ['drv_usb.c']
 if GetDepend(['RT_USING_SDCARD']):
     src += ['drv_sdcard.c']
+
+if rtconfig.CROSS_TOOL == 'gcc':
+    src += ['gcc_startup.s']
     
 CPPPATH = [cwd]
 

bsp/stm32f10x-HAL/drivers/gcc_startup.s

+/**
+  *************** (C) COPYRIGHT 2017 STMicroelectronics ************************
+  * @file      gcc_startup.s
+  * @author    MCD Application Team
+  * @version   V4.2.0
+  * @date      31-March-2017
+  * @brief     Based on STM32F103xE's startup file.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Configure the clock system
+  *                - Configure external SRAM mounted on STM3210E-EVAL board
+  *                  to be used as data memory (optional, to be enabled by user)
+  *                - Branches to entry in the C library (which eventually
+  *                  calls main(), but entry() in RT-Thread).
+  *            After Reset the Cortex-M3 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m3
+  .fpu softvfp
+  .thumb
+
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+  .global Reset_Handler
+
+  .section .text.Reset_Handler
+  .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs r1, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r3, =_sidata
+  ldr r3, [r3, r1]
+  str r3, [r0, r1]
+  adds r1, r1, #4
+
+LoopCopyDataInit:
+  ldr r0, =_sdata
+  ldr r3, =_edata
+  adds r2, r0, r1
+  cmp r2, r3
+  bcc CopyDataInit
+  ldr r2, =_sbss
+  b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs r3, #0
+  str r3, [r2], #4
+
+LoopFillZerobss:
+  ldr r3, = _ebss
+  cmp r2, r3
+  bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+  bl __libc_init_array
+/* Call the application's entry point.*/
+  bl entry
+  bx lr
+.size Reset_Handler, .-Reset_Handler
+

bsp/stm32f10x-HAL/rtconfig.h

@@ -38,6 +38,7 @@
 #define RT_USING_SMALL_MEM
 /* RT_USING_SLAB is not set */
 /* RT_USING_MEMHEAP_AS_HEAP is not set */
+/* RT_USING_MEMTRACE is not set */
 #define RT_USING_HEAP
 
 /* Kernel Device Object */
@@ -46,7 +47,7 @@
 /* RT_USING_INTERRUPT_INFO is not set */
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
-#define RT_CONSOLE_DEVICE_NAME "uart2"
+#define RT_CONSOLE_DEVICE_NAME "uart1"
 /* RT_USING_MODULE is not set */
 
 /* RT-Thread Components */
@@ -61,7 +62,9 @@
 /* Command shell */
 
 #define RT_USING_FINSH
+#define FINSH_THREAD_NAME "tshell"
 #define FINSH_USING_HISTORY
+#define FINSH_HISTORY_LINES 5
 #define FINSH_USING_SYMTAB
 #define FINSH_USING_DESCRIPTION
 #define FINSH_THREAD_PRIORITY 20
@@ -82,6 +85,7 @@
 #define RT_USING_SERIAL
 /* RT_USING_CAN is not set */
 /* RT_USING_HWTIMER is not set */
+/* RT_USING_CPUTIME is not set */
 /* RT_USING_I2C is not set */
 #define RT_USING_PIN
 /* RT_USING_MTD_NOR is not set */
@@ -90,6 +94,7 @@
 /* RT_USING_SDIO is not set */
 /* RT_USING_SPI is not set */
 /* RT_USING_WDT is not set */
+/* RT_USING_WIFI is not set */
 
 /* Using USB */
 
@@ -98,7 +103,7 @@
 
 /* POSIX layer and C standard library */
 
-/* RT_USING_LIBC is not set */
+#define RT_USING_LIBC
 /* RT_USING_PTHREADS is not set */
 
 /* Network stack */
@@ -119,66 +124,90 @@
 
 /* RT_USING_VBUS is not set */
 
+/* Utilities */
+
+/* RT_USING_LOGTRACE is not set */
+/* RT_USING_RYM is not set */
+
 /* RT-Thread online packages */
 
 /* system packages */
 
 /* PKG_USING_PARTITION is not set */
 /* PKG_USING_SQLITE is not set */
+/* PKG_USING_RTI is not set */
 
 /* IoT - internet of things */
 
-/* PKG_USING_CJSON is not set */
 /* PKG_USING_PAHOMQTT is not set */
 /* PKG_USING_WEBCLIENT is not set */
 /* PKG_USING_MONGOOSE is not set */
 /* PKG_USING_WEBTERMINAL is not set */
+/* PKG_USING_CJSON is not set */
+/* PKG_USING_LJSON is not set */
+/* PKG_USING_EZXML is not set */
+/* PKG_USING_NANOPB is not set */
+/* PKG_USING_GAGENT_CLOUD is not set */
+
+/* Wi-Fi */
+
+/* Marvell WiFi */
+
+/* PKG_USING_WLANMARVELL is not set */
+
+/* Wiced WiFi */
+
+/* PKG_USING_WLAN_WICED is not set */
+/* PKG_USING_COAP is not set */
+/* PKG_USING_NOPOLL is not set */
 
 /* security packages */
 
 /* PKG_USING_MBEDTLS is not set */
+/* PKG_USING_libsodium is not set */
+/* PKG_USING_TINYCRYPT is not set */
 
 /* language packages */
 
 /* PKG_USING_JERRYSCRIPT is not set */
+/* PKG_USING_MICROPYTHON is not set */
 
 /* multimedia packages */
 
+/* PKG_USING_OPENMV is not set */
+
 /* tools packages */
 
 /* PKG_USING_CMBACKTRACE is not set */
 /* PKG_USING_EASYLOGGER is not set */
+/* PKG_USING_SYSTEMVIEW is not set */
+/* PKG_USING_IPERF is not set */
 
 /* miscellaneous packages */
 
+/* PKG_USING_FASTLZ is not set */
+/* PKG_USING_MINILZO is not set */
+
+/* example package: hello */
+
 /* PKG_USING_HELLO is not set */
-/* STM32F100C8 is not set */
-/* STM32F100CB is not set */
-/* STM32F100R8 is not set */
-/* STM32F100RB is not set */
 /* STM32F100RC is not set */
 /* STM32F100RD is not set */
 /* STM32F100RE is not set */
-/* STM32F100V8 is not set */
-/* STM32F100VB is not set */
 /* STM32F100VC is not set */
 /* STM32F100VD is not set */
 /* STM32F100VE is not set */
 /* STM32F100ZC is not set */
 /* STM32F100ZD is not set */
 /* STM32F100ZE is not set */
-/* STM32F101C8 is not set */
 /* STM32F101CB is not set */
-/* STM32F101R8 is not set */
 /* STM32F101RB is not set */
 /* STM32F101RC is not set */
 /* STM32F101RD is not set */
 /* STM32F101RE is not set */
 /* STM32F101RF is not set */
 /* STM32F101RG is not set */
-/* STM32F101T8 is not set */
 /* STM32F101TB is not set */
-/* STM32F101V8 is not set */
 /* STM32F101VB is not set */
 /* STM32F101VC is not set */
 /* STM32F101VD is not set */
@@ -190,15 +219,13 @@
 /* STM32F101ZE is not set */
 /* STM32F101ZF is not set */
 /* STM32F101ZG is not set */
-/* STM32F102C8 is not set */
 /* STM32F102CB is not set */
-/* STM32F102R8 is not set */
 /* STM32F102RB is not set */
 /* STM32F103C8 is not set */
 /* STM32F103CB is not set */
 /* STM32F103R8 is not set */
-#define STM32F103RB
-/* STM32F103RC is not set */
+/* STM32F103RB is not set */
+#define STM32F103RC
 /* STM32F103RD is not set */
 /* STM32F103RE is not set */
 /* STM32F103RF is not set */
@@ -229,9 +256,9 @@
 /* STM32F107VC is not set */
 /* RT_USING_HSI is not set */
 #define RT_HSE_VALUE 8000000
-#define STM32F10X_PIN_NUMBERS 64
-/* RT_USING_UART1 is not set */
-#define RT_USING_UART2
+#define RT_USING_UART1
+/* RT_USING_UART2 is not set */
 /* RT_USING_UART3 is not set */
+/* RT_USING_SDCARD is not set */
 
 #endif

bsp/stm32f10x/rtconfig.py

@@ -3,7 +3,7 @@ import os
 # toolchains options
 ARCH='arm'
 CPU='cortex-m3'
-CROSS_TOOL='keil'
+CROSS_TOOL='gcc'
 
 if os.getenv('RTT_CC'):
 	CROSS_TOOL = os.getenv('RTT_CC')