- 26 7月, 2016 1 次提交
-
-
由 Rémy Coutable 提交于
Signed-off-by: NRémy Coutable <remy@rymai.me>
-
- 19 7月, 2016 1 次提交
-
-
由 Paco Guzman 提交于
-
- 11 7月, 2016 2 次提交
-
-
由 Sean McGivern 提交于
MySQL's text column isn't big enough for the diffs in the expand-collapse-diffs branch.
-
由 Sean McGivern 提交于
-
- 05 7月, 2016 1 次提交
-
-
由 Timothy Andrew 提交于
Note: This feature was developed independently on master while this was in review. I've removed the conflicting bits and left the relevant additions, mainly a test for `Gitlab::Git::Hook`. The original commit message follows: 1. `gitlab-shell` outputs errors to `stderr`, but we weren't using this information, prior to this commit. Now we capture the `stderr`, and display it in the flash message when branch creation fails. 2. This can be used to display better errors for other git operation failures with small tweaks. 3. The return value of `Gitlab::Git::Hook#trigger` is changed from a simple `true`/`false` to a tuple of `[status, errors]`. All usages and tests have been updated to reflect this change. 4. This is only relevant to branch creation _from the Web UI_, since SSH and HTTP pushes access `gitlab-shell` either directly or through `gitlab-workhorse`. 5. A few minor changes need to be made on the `gitlab-shell` end. Right now, the `stderr` message it outputs is prefixed by "GitLab: ", which shows up in our flash message. This is better removed.
-
- 30 6月, 2016 2 次提交
-
-
由 Alejandro Rodríguez 提交于
-
由 Alejandro Rodríguez 提交于
-
- 28 6月, 2016 4 次提交
-
-
由 http://jneen.net/ 提交于
-
由 http://jneen.net/ 提交于
-
由 http://jneen.net/ 提交于
This reverts commit b435d7405364d28ec364072f4437512da2876762.
-
由 http://jneen.net/ 提交于
-
- 16 6月, 2016 2 次提交
-
-
由 James Lopez 提交于
This reverts commit 13e37a3e.
-
由 James Lopez 提交于
-
- 12 6月, 2016 1 次提交
-
-
由 Stan Hu 提交于
Here was the problem: 1. When determining whether a given blob is viewable text, gitlab_git reads the first 1024 bytes and checks with Linguist whether it is a text or binary file. 2. If the blob is text, GitLab will attempt to display it. 3. However, if the text has binary characters after the first 1024 bytes, then GitLab will attempt to load the entire contents, but the encoding will be ASCII-8BIT since there are binary characters. 4. The Error 500 results when GitLab attempts to display a mix UTF-8 and ASCII-8BIT. To fix this, we load as much data as we are willing to display so that the detection will work properly. Requires an update to gitlab_git: gitlab-org/gitlab_git!86 Closes #13826
-
- 04 4月, 2016 1 次提交
-
-
由 Stan Hu 提交于
Closes #14875
-
- 29 1月, 2016 1 次提交
-
-
由 Robert Speicher 提交于
The problem occurred because asset compilation takes a long time, so when the asset cache didn't exist and the first test ran, it would often (randomly) time out during the generation before the actual test even had a chance to run. Now we check if the cache exists before the suite runs, and if not, we manually fire a request to the root URL in order to generate it. This should allow subsequent tests to use the cached assets.
-
- 08 12月, 2015 1 次提交
-
-
由 Marin Jankovski 提交于
-
- 07 12月, 2015 1 次提交
-
-
由 Marin Jankovski 提交于
-
- 05 12月, 2015 1 次提交
-
-
- 04 11月, 2015 1 次提交
-
-
由 Robert Speicher 提交于
Closes #3311
-
- 13 10月, 2015 1 次提交
-
-
由 Stan Hu 提交于
Closes https://github.com/gitlabhq/gitlabhq/issues/8763
-
- 14 8月, 2015 3 次提交
-
-
由 Dmitriy Zaporozhets 提交于
-
由 Dmitriy Zaporozhets 提交于
-
由 Dmitriy Zaporozhets 提交于
Signed-off-by: NDmitriy Zaporozhets <dmitriy.zaporozhets@gmail.com>
-
- 26 7月, 2015 1 次提交
-
-
由 Stan Hu 提交于
Closes #1724
-
- 25 7月, 2015 1 次提交
-
-
由 Jacob Vosmaer 提交于
-
- 22 7月, 2015 1 次提交
-
-
由 Stan Hu 提交于
Closes #1362
-
- 22 6月, 2015 1 次提交
-
-
由 Robert Speicher 提交于
-
- 03 5月, 2015 1 次提交
-
-
由 Robert Speicher 提交于
-
- 28 4月, 2015 1 次提交
-
-
由 Stan Hu 提交于
Closes #1413
-
- 28 3月, 2015 1 次提交
-
-
由 Robert Speicher 提交于
See http://schacon.github.io/git/git-init.html#_template_directory Without this variable, any global git hooks a developer might have in ~/.git_template would be linked in the `.git/hooks` folder for every test repository that gets checked out by TestEnv, and would cause certain specs to fail due to pre-existing hook files.
-
- 17 2月, 2015 1 次提交
-
-
由 Robert Speicher 提交于
- Simplify cleaning the temporary testing path in TestEnv - Don't run gitlab:shell:install if it's already installed - Run git commands quietly
-
- 13 2月, 2015 1 次提交
-
-
由 Jeroen van Baarsen 提交于
Signed-off-by: NJeroen van Baarsen <jeroenvanbaarsen@gmail.com>
-
- 11 1月, 2015 3 次提交
-
-
由 Dmitriy Zaporozhets 提交于
-
由 marmis85 提交于
-
由 marmis85 提交于
-
- 18 11月, 2014 2 次提交
-
-
由 Dmitriy Zaporozhets 提交于
This reverts commit 533f4cdf.
-
由 Ciro Santilli 提交于
Before this it would fail because git hooks automatically prepend things to the path, which can lead the wrong Ruby version to be called in which dependencies are not installed. To make sure that this is correct, the forked_merge_requests commented out test that depends on this change was uncommented. For that test to pass, it is also necessary to setup the mock server on port 3001 under test_env.rb.
-
- 01 10月, 2014 1 次提交
-
-
由 Ciro Santilli 提交于
-
- 27 9月, 2014 1 次提交
-
-
由 Ciro Santilli 提交于
-