- 04 1月, 2010 2 次提交
-
-
由 Junio C Hamano 提交于
CE_WT_REMOVE has already grabbed the same value. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Commit 9e8eceab (Add 'merge' mode to 'git reset', 2008-12-01) disallowed "git reset --merge" when there was unmerged entries. But it wished if unmerged entries were reset as if --hard (instead of --merge) has been used. This makes sense because all "mergy" operations makes sure that any path involved in the merge does not have local modifications before starting, so resetting such a path away won't lose any information. The previous commit changed the behavior of --merge to accept resetting unmerged entries if they are reset to a different state than HEAD, but it did not reset the changes in the work tree, leaving the conflict markers in the resulting file in the work tree. Fix it by doing three things: - Update the documentation to match the wish of original "reset --merge" better, namely, "An unmerged entry is a sign that the path didn't have any local modification and can be safely resetted to whatever the new HEAD records"; - Update read_index_unmerged(), which reads the index file into the cache while dropping any higher-stage entries down to stage #0, not to copy the object name from the higher stage entry. The code used to take the object name from the a stage entry ("base" if you happened to have stage #1, or "ours" if both sides added, etc.), which essentially meant that you are getting random results depending on what the merge did. The _only_ reason we want to keep a previously unmerged entry in the index at stage #0 is so that we don't forget the fact that we have corresponding file in the work tree in order to be able to remove it when the tree we are resetting to does not have the path. In order to differentiate such an entry from ordinary cache entry, the cache entry added by read_index_unmerged() is marked as CE_CONFLICTED. - Update merged_entry() and deleted_entry() so that they pay attention to cache entries marked as CE_CONFLICTED. They are previously unmerged entries, and the files in the work tree that correspond to them are resetted away by oneway_merge() to the version from the tree we are resetting to. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 15 12月, 2009 1 次提交
-
-
由 Nguyễn Thái Ngọc Duy 提交于
Previously CE_MATCH_IGNORE_VALID flag is used by both valid and skip-worktree bits. While the two bits have similar behaviour, sharing this flag means "git update-index --really-refresh" will ignore skip-worktree while it should not. Instead another flag is introduced to ignore skip-worktree bit, CE_MATCH_IGNORE_VALID only applies to valid bit. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 08 12月, 2009 1 次提交
-
-
由 Matthieu Moy 提交于
The previous error message was the same in many situations (unknown revision or path not in the working tree). We try to help the user as much as possible to understand the error, especially with the sha1:filename notation. In this case, we say whether the sha1 or the filename is problematic, and diagnose the confusion between relative-to-root and relative-to-$PWD confusion precisely. The 7 new error messages are tested. Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 21 11月, 2009 1 次提交
-
-
由 Christian Couder 提交于
This has the same effect as --no-replace-objects option; git ignores the replace refs. When --no-replace-objects option is passed to git, this environment variable is set to "1" and exported to subprocesses in order to propagate the same setting. It is useful for example for scripts, as the git commands used in them can now be aware that they must not read replace refs. Tested-by: NMichael J Gruber <git@drmicha.warpmail.net> Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 18 11月, 2009 1 次提交
-
-
由 Matthieu Moy 提交于
These config variables are parsed to substitute ~ and ~user with getpw entries. user_path() refactored into new function expand_user_path(), to allow dynamically allocating the return buffer. Original patch by Karl Chen, modified by Matthieu Moy, and further amended by Junio C Hamano. Signed-off-by: NKarl Chen <quarl@quarl.org> Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 16 11月, 2009 1 次提交
-
-
由 Tarmigan Casebolt 提交于
We already have these checks in many printf-type functions that have prototypes which are in header files. Add these same checks to some more prototypes in header functions and to static functions in .c files. cc: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: NTarmigan Casebolt <tarmigan+git@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 14 11月, 2009 2 次提交
-
-
由 Jonathan Nieder 提交于
Expose the command found by setup_pager() for scripts to use. Scripts can use this to avoid repeating the logic to look for a proper pager in each command. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
Expose the command used by launch_editor() for scripts to use. This should allow one to avoid searching for a proper editor separately in each command. git_editor(void) uses the logic to decide which editor to use that used to live in launch_editor(). The function returns NULL if there is no suitable editor; the caller is expected to issue an error message when appropriate. launch_editor() uses git_editor() and gives the error message the same way as before when EDITOR is not set. "git var GIT_EDITOR" gives the editor name, or an error message when there is no appropriate one. "git var -l" gives GIT_EDITOR=name only if there is an appropriate editor. Originally-submitted-by: NJohannes Sixt <j6t@kdbg.org> Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 10 11月, 2009 1 次提交
-
-
由 Shawn O. Pearce 提交于
Eons ago HPA taught git-daemon how to protect itself from /../ attacks, which Junio brought back into service in d79374c7 ("daemon.c and path.enter_repo(): revamp path validation"). I did not carry this into git-http-backend as originally we relied only upon PATH_TRANSLATED, and assumed the HTTP server had done its access control checks to validate the resolved path was within a directory permitting access from the remote client. This would usually be sufficient to protect a server from requests for its /etc/passwd file by http://host/smart/../etc/passwd sorts of URLs. However in 917adc03 Mark Lodato added GIT_PROJECT_ROOT as an additional method of configuring the CGI. When this environment variable is used the web server does not generate the final access path and therefore may blindly pass through "/../etc/passwd" in PATH_INFO under the assumption that "/../" might have special meaning to the invoked CGI. Instead of permitting these sorts of malformed path requests, we now reject them back at the client, with an error message for the server log. This matches git-daemon behavior. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 31 10月, 2009 1 次提交
-
-
由 Shawn O. Pearce 提交于
In 41cb7488 Linus moved this function to connect.c for reuse inside of the git-clone-pack command. That was 2005, but in 2006 Junio retired git-clone-pack in commit efc7fa53. Since then the only caller has been fetch-pack. Since this ACK/NAK exchange is only used by the fetch-pack/upload-pack protocol we should move it back to be a private detail of fetch-pack. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 20 10月, 2009 1 次提交
-
-
由 Johannes Schindelin 提交于
Commit notes are blobs which are shown together with the commit message. These blobs are taken from the notes ref, which you can configure by the config variable core.notesRef, which in turn can be overridden by the environment variable GIT_NOTES_REF. The notes ref is a branch which contains "files" whose names are the names of the corresponding commits (i.e. the SHA-1). The rationale for putting this information into a ref is this: we want to be able to fetch and possibly union-merge the notes, maybe even look at the date when a note was introduced, and we want to store them efficiently together with the other objects. This patch has been improved by the following contributions: - Thomas Rast: fix core.notesRef documentation - Tor Arne Vestbø: fix printing of multi-line notes - Alex Riesen: Using char array instead of char pointer costs less BSS - Johan Herland: Plug leak when msg is good, but msglen or type causes return Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NTor Arne Vestbø <tavestbo@trolltech.com> Signed-off-by: NJohan Herland <johan@herland.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com> get_commit_notes(): Plug memory leak when 'if' triggers, but not because of read_sha1_file() failure
-
- 19 10月, 2009 1 次提交
-
-
由 Junio C Hamano 提交于
When flipping commits around on topic branches, I often end up doing this sequence: * Run "log --oneline next..jc/frotz" to find out the first commit on 'jc/frotz' branch not yet merged to 'next'; * Run "checkout $that_commit^" to detach HEAD to the parent of it; * Rebuild the series on top of that commit; and * "show-branch jc/frotz HEAD" and "diff jc/frotz HEAD" to verify. Introduce a new syntax to "git checkout" to name the commit to switch to, to make the first two steps easier. When the branch to switch to is specified as A...B (you can omit either A or B but not both, and HEAD is used instead of the omitted side), the merge base between these two commits are computed, and if there is one unique one, we detach the HEAD at that commit. With this, I can say "checkout next...jc/frotz". Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 18 10月, 2009 1 次提交
-
-
由 Junio C Hamano 提交于
Make it possible to invole the logic of verify_filename() to make sure the pathname arguments are unambiguous without actually dying. The caller may want to do something different.
-
- 29 9月, 2009 1 次提交
-
-
由 Miklos Vajna 提交于
Previously the old error message just told the user that it was not possible to delete the ref from the packed-refs file. Give instructions on how to resolve the problem. Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org> Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NShawn O. Pearce <spearce@spearce.org>
-
- 13 9月, 2009 2 次提交
-
-
由 Clemens Buchacher 提交于
A local clone without hardlinks copies all objects, including dangling ones, to the new repository. Since the mtimes are renewed, those dangling objects cannot be pruned by "git gc --prune", even if they would have been old enough for pruning in the original repository. Instead, preserve mtime during copy. "git gc --prune" will then work in the clone just like it did in the original. Signed-off-by: NClemens Buchacher <drizzd@aon.at> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jim Meyering 提交于
In 2d14d65c (Use a clearer style to issue commands to remote helpers, 2009-09-03) I happened to notice two changes like this: - write_in_full(helper->in, "list\n", 5); + + strbuf_addstr(&buf, "list\n"); + write_in_full(helper->in, buf.buf, buf.len); + strbuf_reset(&buf); IMHO, it would be better to define a new function, static inline ssize_t write_str_in_full(int fd, const char *str) { return write_in_full(fd, str, strlen(str)); } and then use it like this: - strbuf_addstr(&buf, "list\n"); - write_in_full(helper->in, buf.buf, buf.len); - strbuf_reset(&buf); + write_str_in_full(helper->in, "list\n"); Thus not requiring the added allocation, and still avoiding the maintenance risk of literal string lengths. These days, compilers are good enough that strlen("literal") imposes no run-time cost. Transformed via this: perl -pi -e \ 's/write_in_full\((.*?), (".*?"), \d+\)/write_str_in_full($1, $2)/'\ $(git grep -l 'write_in_full.*"') Signed-off-by: NJim Meyering <meyering@redhat.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 12 9月, 2009 1 次提交
-
-
由 Jeff King 提交于
This message is designed to help new users understand what has happened when refs fail to push. However, it does not help experienced users at all, and significantly clutters the output, frequently dwarfing the regular status table and making it harder to see. This patch introduces a general configuration mechanism for optional messages, with this push message as the first example. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 06 9月, 2009 1 次提交
-
-
由 Junio C Hamano 提交于
People who configured trailing-space depended on it to catch both extra white space at the end of line, and extra blank lines at the end of file. Earlier attempt to introduce only blank-at-eof gave them an escape hatch to keep the old behaviour, but it is a regression until they explicitly specify the new error class. This introduces a blank-at-eol that only catches extra white space at the end of line, and makes the traditional trailing-space a convenient synonym to catch both blank-at-eol and blank-at-eof. This way, people who used trailing-space continue to catch both classes of errors. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 05 9月, 2009 1 次提交
-
-
由 Junio C Hamano 提交于
"git apply" strips new blank lines at EOF under --whitespace=fix option, but neigher --whitespace=warn nor --whitespace=error paid any attention to these errors. Introduce a new whitespace error class, blank-at-eof, to make the whitespace error handling more consistent. The patch adds a new "linenr" field to the struct fragment in order to record which line the hunk started in the input file, but this is needed solely for reporting purposes. The detection of this class of whitespace errors cannot be done while parsing a patch like we do for all the other classes of whitespace errors. It instead has to wait until we find where to apply the hunk, but at that point, we do not have an access to the original line number in the input file anymore, hence the new field. Depending on your point of view, this may be a bugfix that makes warn and error in line with fix. Or you could call it a new feature. The line between them is somewhat fuzzy in this case. Strictly speaking, triggering more errors than before is a change in behaviour that is not backward compatible, even though the reason for the change is because the code was not checking for an error that it should have. People who do not want added blank lines at EOF to trigger an error can disable the new error class. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 31 8月, 2009 1 次提交
-
-
由 Alex Riesen 提交于
The main purpose is to allow predictable testing of the code. Signed-off-by: NAlex Riesen <raa.lkml@gmail.com> Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 24 8月, 2009 3 次提交
-
-
由 Nguyễn Thái Ngọc Duy 提交于
This patch introduces core.sparseCheckout, which will control whether sparse checkout support is enabled in unpack_trees() It also loads sparse-checkout file that will be used in the next patch. I split it out so the next patch will be shorter, easier to read. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
CE_REMOVE now removes both worktree and index versions. Sparse checkout must be able to remove worktree version while keep the index intact when checkout area is narrowed. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Detail about this bit is in Documentation/git-update-index.txt. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 22 8月, 2009 2 次提交
-
-
由 Matthieu Moy 提交于
git reset without argument displays a summary of the local modification, like this: $ git reset Makefile: locally modified Some people have problems with this; they look like an error message. This patch makes its output mimic how "git checkout $another_branch" reports the paths with local modifications. "git add --refresh --verbose" is changed in the same way. It also adds a header to make it clear that the output is informative, and not an error. Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr>
-
由 Matthieu Moy 提交于
The change in the output is going to become more general than just saying "changed", so let's make the variable name more general too. Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 18 8月, 2009 1 次提交
-
-
由 Junio C Hamano 提交于
Merlyn noticed that Documentation/install-doc-quick.sh no longer correctly removes old installed documents when the target directory has a leading path that is a symlink. It turns out that "checkout-index --prefix" was broken by recent b6986d8a (git-checkout: be careful about untracked symlinks, 2009-07-29). I suspect has_symlink_leading_path() could learn the third parameter (prefix that is allowed to be symlinked directories) to allow us to retire a similar function has_dirs_only_path(). Another avenue of fixing this I considered was to get rid of base_dir and base_dir_len from "struct checkout", and instead make "git checkout-index" when run with --prefix mkdir the leading path and chdir in there. It might be the best longer term solution to this issue, as the base_dir feature is used only by that rather obscure codepath as far as I know. But at least this patch should fix this breakage. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 06 8月, 2009 1 次提交
-
-
由 Giuseppe Bilotta 提交于
Introduce --ignore-whitespace option and corresponding config bool to ignore whitespace differences while applying patches, akin to the 'patch' program. 'git am', 'git rebase' and the bash git completion are made aware of this option. Signed-off-by: NGiuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 30 7月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
This fixes the case where an untracked symlink that points at a directory with tracked paths confuses the checkout logic, demostrated in t6035. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 25 7月, 2009 1 次提交
-
-
由 Johannes Schindelin 提交于
When you have grafts that pretend that a given commit has different parents than the ones recorded in the commit object, it is dangerous to let 'git repack' remove those hidden parents, as you can easily remove the graft and end up with a broken repository. So let's play it safe and keep those parent objects and everything that is reachable by them, in addition to the grafted parents. As this behavior can only be triggered by git pack-objects, and as that command handles duplicate parents gracefully, we do not bother to cull duplicated parents that may result by using both true and grafted parents. Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 19 7月, 2009 1 次提交
-
-
由 Junio C Hamano 提交于
If the message said "we will be changing the default in the future, so this is to warn people who want to keep the current default what to do", it would have made some sense, but as it stands, the message is merely an unsolicited advertisement for a new feature, which it is not helpful at all. Squelch it. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 10 7月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
The threaded index preloading will want it, so that it can avoid locking by simply using a per-thread symlink/directory cache. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 01 6月, 2009 3 次提交
-
-
由 David Aguilar 提交于
Naturally, prep_temp_blob() did not care about filenames. As a result, GIT_EXTERNAL_DIFF and textconv generated filenames such as ".diff_XXXXXX". This modifies prep_temp_blob() to generate user-friendly filenames when creating temporary files. Diffing "name.ext" now generates "XXXXXX_name.ext". Signed-off-by: NDavid Aguilar <davvid@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
This new "read_replace_refs" global variable is set to 1 by default, so that replace refs are used by default. But reachability traversal and packing commands ("cmd_fsck", "cmd_prune", "cmd_pack_objects", "upload_pack", "cmd_unpack_objects") set it to 0, as they must work with the original DAG. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
This new function will replace "read_sha1_file". This latter function becoming just a stub to call the former will a NULL "replacement" argument. This new function is needed because sometimes we need to use the replacement sha1. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 02 5月, 2009 1 次提交
-
-
由 Felipe Contreras 提交于
Essentially; s/type* /type */ as per the coding guidelines. Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 30 4月, 2009 1 次提交
-
-
由 Johannes Schindelin 提交于
"Unreliable hardlinks" is a misleading description for what is happening. So rename it to something less misleading. Suggested by Linus Torvalds. Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 26 4月, 2009 1 次提交
-
-
由 Johannes Schindelin 提交于
It seems that accessing NTFS partitions with ufsd (at least on my EeePC) has an unnerving bug: if you link() a file and unlink() it right away, the target of the link() will have the correct size, but consist of NULs. It seems as if the calls are simply not serialized correctly, as single-stepping through the function move_temp_to_file() works flawlessly. As ufsd is "Commertial software" (sic!), I cannot fix it, and have to work around it in Git. At the same time, it seems that this fixes msysGit issues 222 and 229 to assume that Windows cannot handle link() && unlink(). Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Acked-by: NJohannes Sixt <j6t@kdbg.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 28 3月, 2009 1 次提交
-
-
由 Junio C Hamano 提交于
adjust_shared_perm() first obtains the mode bits from lstat(2), expecting to find what the result of applying user's umask is, and then tweaks it as necessary. When the file to be adjusted is created with mkstemp(3), however, the mode thusly obtained does not have anything to do with user's umask, and we would need to start from 0444 in such a case and there is no point running lstat(2) for such a path. This introduces a new API set_shared_perm() to bypass the lstat(2) and instead force setting the mode bits to the desired value directly. adjust_shared_perm() becomes a thin wrapper to the function. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 23 3月, 2009 1 次提交
-
-
由 Junio C Hamano 提交于
These allow you to say "git checkout @{-2}" to switch to the branch two "branch switching" ago by pretending as if you typed the name of that branch. As it is likely that we will be introducing more short-hands to write the name of a branch without writing it explicitly, rename the functions from "nth_last_branch" to more generic "branch_name", to prepare for different semantics. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-