- 16 9月, 2007 2 次提交
-
-
由 J. Bruce Fields 提交于
Most of this is probably only of interest to git developers. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
The descriptions of the various object types should all be a subsection of the "Object Database" section. I cribbed most of this chapter from the README (now core-intro.txt and git(7)), because there's stuff in there people need to know and I was too lazy to rewrite it. The audience isn't quite right, though--the chapter is a mixture of user- and developer- level documentation that isn't as appropriate now as it was originally. So, reserve this chapter for stuff users need to know, and move the source code introduction into a new "git hacking" chapter where we'll also move any hacker-only technical details. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
- 15 9月, 2007 5 次提交
-
-
由 Junio C Hamano 提交于
Bram Schoenmakers noticed that git-config document was formatted incorrectly. Depending on the version of AsciiDoc and docbook toolchain, it is sometimes taken as a numbered example by AsciiDoc, some other times passed intact to roff format to confuse "man". Since we refer to the repository metadata directory as $GIT_DIR elsewhere, work it around by using that symbolic name. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Benoit Sigoure 提交于
An earlier commit fixed type-change case in "git add -u". This adds a test to make sure we do not introduce regression. At the same time, it fixes a stupid typo in the error message. Signed-off-by: NBenoit Sigoure <tsuna@lrde.epita.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jari Aalto 提交于
The description of the option gave impression that there were several formats available by using three dots. There are no other formats than tar and gzip currently supported. Clarify that the archive goes to the standard output. Signed-off-by: NJari Aalto <jari.aalto@cante.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Linus Torvalds 提交于
This adds more proper rename detection limits. Instead of just checking the limit against the number of potential rename destinations, we verify that the rename matrix (which is what really matters) doesn't grow ridiculously large, and we also make sure that we don't overflow when doing the matrix size calculation. This also changes the default limits from unlimited, to a rename matrix that is limited to 100 entries on a side. You can raise it with the config entry, or by using the "-l<n>" command line flag, but at least the default is now a sane number that avoids spending lots of time (and memory) in situations that likely don't merit it. The choice of default value is of course very debatable. Limiting the rename matrix to a 100x100 size will mean that even if you have just one obvious rename, but you also create (or delete) 10,000 files, the rename matrix will be so big that we disable the heuristics. Sounds reasonable to me, but let's see if people hit this (and, perhaps more importantly, actually *care*) in real life. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Code inspection by Linus found this. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 14 9月, 2007 5 次提交
-
-
由 Junio C Hamano 提交于
This will allow RFC-literate users to say: format-patch --in-reply-to='<message.id@site.name>' without forcing them to strip the surrounding angle brackets like this: format-patch --in-reply-to='message.id@site.name' We accept both forms, and the latter gets necessary < and > around it as before. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ulrik Sverdrup 提交于
A duplicate of an already existing section in the documentation of git-filter-branch was added in commit f95eef15. This patch removes that redundant section. Signed-off-by: NUlrik Sverdrup <ulrik.sverdrup@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Gerrit Pape 提交于
If the curl program is not available (or not executable), and git clone is started to clone a repository through http, this is the output Initialized empty Git repository in /tmp/puppet/.git/ /usr/bin/git-clone: line 37: curl: command not found Cannot get remote repository information. Perhaps git-update-server-info needs to be run there? This patch improves the error message by checking the return code when running curl to exit immediately if it's 126 or 127; the error output now is Initialized empty Git repository in /tmp/puppet/.git/ /usr/bin/git-clone: line 37: curl: command not found Adrian Bridgett noticed this and reported through http://bugs.debian.org/440976Signed-off-by: NGerrit Pape <pape@smarden.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Alexandre Julliard 提交于
The previous check caused the hook to reject as unannotated any tag whose SHA1 starts with a zero. Signed-off-by: NAlexandre Julliard <julliard@winehq.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 13 9月, 2007 3 次提交
-
-
由 Junio C Hamano 提交于
* sp/maint-no-thin: Make --no-thin the default in git-push to save server resources
-
由 Jean-Luc Herren 提交于
There was no newline at the end of the index commit message, putting the shell prompt at its end after a 'git cat-file commit $id'. This is similar to what was fixed in 843103d6. Signed-off-by: NJean-Luc Herren <jlh@gmx.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Dmitry V. Levin 提交于
Right now one can amend the last non-merge commit using a dirty index and in the process maybe cause the last commit to have the same tree as its parent. In such a case one would want to discard the last commit instead of amending it. This reverts commit 8588452c. Signed-off-by: NDmitry V. Levin <ldv@altlinux.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 12 9月, 2007 2 次提交
-
-
由 David Kastrup 提交于
Although message-id by defintion should have surrounding angle brackets, there is no point forcing people to type them in. Signed-off-by: NDavid Kastrup <dak@gnu.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ramsay Jones 提交于
On filesystems where it is appropriate to set core.filemode to false, test 29 ("commitdiff(0): mode change") fails when git-commit does not notice a file (execute) permission change. A fix requires noting the new file execute permission in the index with a "git update-index --chmod=+x", prior to the commit. Add a function (note_chmod) which implements this idea, and insert a call in each test that modifies the x permission. Signed-off-by: NRamsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 10 9月, 2007 3 次提交
-
-
由 Shawn O. Pearce 提交于
1) pushes happen less often than fetches, so the bandwidth saving is much less visible in that case overall. 2) thin packs have to be complemented with missing delta bases to be valid, so many received thin packs will take more disk space. 3) the bother of repacking should be distributed amongst "clients" i.e. fetchers and pushers as much as possible, and not the server being fetched or pushed, to keep disk and CPU usage low on the server. This is why a fetch should get thin packs but a push should not. Both Nico and I have been assuming that --no-thin was the default behavior of git-push ever since Nico introduced --fix-thin into the index-pack process, which allowed fetch and receive-pack to avoid exploding packfiles received during transfer. This patch finally makes it so. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nicolas Pitre 提交于
Remove obsolete details (core.legacyheaders is always true now). Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Carlos Rica 提交于
Most of this patch code and message was written by Shawn O. Pearce. I made some tests to know what the problem was, and then I changed the code related with the SIGPIPE signal. If the user has misconfigured `user.signingkey` in their .git/config or just doesn't have any secret keys on their keyring and they ask for a signed tag with `git tag -s` we better make sure the resulting tag was actually signed by gpg. Prior versions of builtin git-tag allowed this failure to slip by without error as they were not checking the return value of the finish_command() so they did not notice when gpg exited with an error exit status. They also did not fail if gpg produced an empty output or if read_in_full received an error from the read system call while trying to read the pipe back from gpg. Finally, we did not actually honor any return value from the do_sign function as it returns ssize_t but was being stored into an unsigned long. This caused the compiler to optimize out the die condition, allowing git-tag to continue along and create the tag object. However, when gpg gets a wrong username, it exits before any read was done and then the writing process receives SIGPIPE and program is terminated. By ignoring this signal, anyway, the function write_or_die gets EPIPE from write_in_full and exits returning 0 to the system without a message. Here we better call to write_in_full directly so we can fail printing a message and return safely to the caller. With these issues fixed `git-tag -s` will now fail to create the tag and will report a non-zero exit status to its caller, thereby allowing automated helper scripts to detect (and recover from) failure if gpg is not working properly. Proposed-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NCarlos Rica <jasampler@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 09 9月, 2007 2 次提交
-
-
由 Eric Wong 提交于
Use the rev-list --parents functionality to read the parents of the commit. cat-file only shows the raw object with the original parents and doesn't take into account grafts; so we'll rely on rev-list machinery for the smarts here. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Sven Verdoolaege 提交于
The code to squelch empty diffs introduced by commit fb13227e would inadvertently populate filespec "two" of a submodule change using the uninitialized (null) SHA1, thereby replacing the submodule SHA1 by 0{40} in the output. This change teaches diffcore_skip_stat_unmatch to handle submodule changes correctly. Signed-off-by: NSven Verdoolaege <skimo@kotnet.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 08 9月, 2007 3 次提交
-
-
由 Eric Wong 提交于
We have a workaround for the reparent function not working correctly on the SVN native protocol servers. This workaround opens a new connection (SVN::Ra object) to the new URL/directory. Since libsvn appears limited to only supporting one connection at a time, this workaround invalidates the Git::SVN::Ra object that is $self inside gs_fetch_loop_common(). So we need to restart that connection once all the fetching is done for each loop iteration to be able to run get_log() successfully. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Smith 提交于
If the tag was moved in CVS or SVN history, it will be moved in the imported history as well. Tag history is not tracked. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Mike Ralphson 提交于
If we're counting, a smaller number is 'fewer' not 'less' Signed-off-by: NMike Ralphson <mike@abacus.co.uk> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 06 9月, 2007 5 次提交
-
-
由 Shawn O. Pearce 提交于
Many users get confused when `git push origin master:foo` works when foo already exists on the remote repository but are confused when foo doesn't exist as a branch and this form does not create the branch foo. This new example highlights the trick of including refs/heads/ in front of the desired branch name to create a branch. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Shawn O. Pearce 提交于
Kristian Høgsberg pointed out that the two file modifications we were doing during the 'creating initial files' step are not even used within the test suite. This was actually confusing as we do not even need these changes for the tests to pass. All that really matters here is the specific commit dates are used so that these appear in the branch's reflog, and that the dates are different so that the branch will update when asked and the reflog entry is also updated. There is no need for the file modification. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Dmitry V. Levin 提交于
The dependency was missing. Signed-off-by: NDmitry V. Levin <ldv@altlinux.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Shawn O. Pearce 提交于
Recently I found that doing a sequence like the following: git-new-workdir a b ... git-new-workdir a b by accident will cause a (and now also b) to have an infinite cycle in its refs directory. This is caused by git-new-workdir trying to create the "refs" symlink over again, only during the second time it is being created within a's refs directory and is now also pointing back at a's refs. This causes confusion in git as suddenly branches are named things like "refs/refs/refs/refs/refs/refs/refs/heads/foo" instead of the more commonly accepted "refs/heads/foo". Plenty of commands start to see ambiguous ref names and others just take ages to compute. git-clone has the same safety check, so git-new-workdir should behave just like it. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
When the preimage we are patching is shorter than what the patch text expects, we tried to match the buffer contents at the "original" line with the fragment in full, without checking we have enough data to match in the preimage. This caused the size of a later memmove() to wrap around and attempt to scribble almost the entire address space. Not good. The code that follows the part this patch touches tries to match the fragment with line offsets. Curiously, that code does not have the problem --- it guards against reading past the end of the preimage. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 03 9月, 2007 2 次提交
-
-
由 Junio C Hamano 提交于
HPA noticed that yum does not like the newer git RPM set; it turns out that we do not ship git-p4 anymore but existing installations do not realize the package is gone if we do not tell anything about it. David Kastrup suggests using Obsoletes in the spec file of the new RPM to replace the old package, so here is a try. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
-
- 02 9月, 2007 3 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* jp/send-email-cc: git-send-email --cc-cmd
-
由 Robin Rosenberg 提交于
Signed-off-by: NRobin Rosenberg <robin.rosenberg@dewire.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 01 9月, 2007 5 次提交
-
-
由 Junio C Hamano 提交于
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Luben Tuikov 提交于
Allow port specification in ssh:// URLs in the usual notation: ssh://[user@]host.domain[:<port>]/<path> This allows git to be used over ssh-tunneling networks. Signed-off-by: NLuben Tuikov <ltuikov@yahoo.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Johannes Sixt 提交于
When a topic branch is rebased, some of whose commits are already cherry-picked upstream: o--X--A--B--Y <- master \ A--B--Z <- topic then 'git rebase -m master' would report: Already applied: 0001 Y Already applied: 0002 Y With this fix it reports the expected: Already applied: 0001 A Already applied: 0002 B As an added bonus, this change also avoids 'echo' of a commit message, which might contain escapements. Signed-off-by: NJohannes Sixt <johannes.sixt@telecom.at> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-