- 17 12月, 2006 3 次提交
-
-
由 Johannes Schindelin 提交于
When renaming a branch, the corresponding config section should be renamed, too. Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Johannes Schindelin 提交于
Given a config like this: # A config [very.interesting.section] not The command $ git repo-config --rename-section very.interesting.section bla.1 will lead to this config: # A config [bla "1"] not Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This hacks the input to fmt-merge-msg to make the message for merging early part of a branch a little easier to read. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 16 12月, 2006 14 次提交
-
-
由 Johannes Schindelin 提交于
Most of this is derived from the documentation of RCS merge. Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Quy Tonthat 提交于
When --use-separate-remote is used on git-clone, the remote heads are saved under $GIT_DIR/refs/remotes/origin/, not "$GIT_DIR/remotes/origin/" Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Andy Parkins 提交于
If the current branch was "master" then git-status wouldn't say # On branch XXXX In its output. This patch makes it so that this message is always output; regardless of branch name. Signed-off-by: NAndy Parkins <andyparkins@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Shawn O. Pearce 提交于
Now that 'git add' is considered a first-class UI for 'update-index' and that the 'git add' documentation states "Even modified files must be added to the set of changes about to be committed" we should make the output of 'git status' align with that documentation and common usage. So now we see a status output such as: # Added but not yet committed: # (will commit) # # new file: x # # Changed but not added: # (use "git add file1 file2" to include for commit) # # modified: x # # Untracked files: # (use "git add" on files to include for commit) # # y which just reads better in the context of using 'git add' to manipulate a commit (and not a checkin, whatever the heck that is). We also now support 'color.status.added' as an alias for the existing 'color.status.updated', as this alias more closely aligns with the current output and documentation. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Shawn O. Pearce 提交于
If a user modifies files and runs 'git commit' (without the very useful -a option) and they have not yet updated the index they are probably coming from another SCM-like tool which would perform the same as 'git commit -a' in this case. Showing the user their current status and a final line of "nothing to commit" is not very reassuring, as the user might believe that Git did not recognize their files were modified. Instead we can suggest as part of the 'nothing to commit' message that the user invoke 'git add' to add files to their next commit. Suggested by Andy Parkins' Git 'niggles' list (<200612132237.10051.andyparkins@gmail.com>). Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Brian Gernhardt 提交于
Two of the cases has "[--] [<path>...]" and two had "-- [<path>...]". Not terribly consistent and potentially confusing. Also add "[--]" to the synopsis so that it's obvious you can use it from the very beginning. Signed-off-by: NBrian Gernhardt <benji@silverinsanity.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Brian Gernhardt 提交于
For multivars, the "git-repo-config name value ^$" is useful but nonintuitive and troublesome to do repeatedly (since the value is not at the end of the command line). This commit simply adds an --add option that adds a new value to a multivar. Particularly useful for tracking a new branch on a remote: git-repo-config --add remote.origin.fetch +next:origin/next Includes documentation and test. Signed-off-by: NBrian Gernhardt <benji@silverinsanity.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Shawn O. Pearce 提交于
Now that 'git show' accepts ref:path as an argument to specify a tree or blob we should use the same completion logic as we support for cat-file's object identifier. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Luben Tuikov 提交于
PERL_PATH is used by perl/Makefile so export it. Signed-off-by: NLuben Tuikov <ltuikov@yahoo.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Shawn O. Pearce 提交于
New and experienced Git users alike are finding out too late that they forgot to enable reflogs in the current repository, and cannot use the information stored within it to recover from an incorrectly entered command such as `git reset --hard HEAD^^^` when they really meant HEAD^^ (aka HEAD~2). So enable reflogs by default in all future versions of Git, unless the user specifically disables it with: [core] logAllRefUpdates = false in their .git/config or ~/.gitconfig. We only enable reflogs in repositories that have a working directory associated with them, as shared/bare repositories do not have an easy means to prune away old log entries, or may fail logging entirely if the user's gecos information is not valid during a push. This heuristic was suggested on the mailing list by Junio. Documentation was also updated to indicate the new default behavior. We probably should start to teach usuing the reflog to recover from mistakes in some of the tutorial material, as new users are likely to make a few along the way and will feel better knowing they can recover from them quickly and easily, without fsck-objects' lost+found features. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Shawn O. Pearce 提交于
Back in the old days of Git when people messed around with their GIT_DIR environment variable more often it was nice to know whether or not git-init-db created a .git directory or used GIT_DIR. As most users at that time were rather technical UNIXy folk the message "defaulting to local storage area" made sense to some and seemed reasonable. But it doesn't really convey any meaning to the new Git user, as they don't know what a 'local storage area is' nor do they know enough about Git to care. It also really doesn't tell the experienced Git user a whole lot about the command they just ran, especially if they might be reinitializing an existing repository (e.g. to update hooks). So now we print out what we did ("Initialized empty" or "Reinitialized existing"), what type of repository ("" or "shared"), and what location the repository will be in ("$GIT_DIR"). Suggested in part by Andy Parkins in his Git 'niggles' list (<200612132237.10051.andyparkins@gmail.com>). Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
It is nicer to let the user know when a commit succeeded all the time, not only the first time. Also the commit sha1 is much more useful than the tree sha1 in this case. This patch also introduces a -q switch to supress this message as well as the summary of created/deleted files. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Shawn O. Pearce 提交于
The Cygwin folks have done a fine job at creating a POSIX layer on Windows That Just Works(tm). However it comes with a penalty; accessing files in the working tree by way of stat/open/mmap can be slower for diffcore than inflating the data from a blob which is stored in a packfile. This performance problem is especially an issue in merge-recursive when dealing with nearly 7000 added files, as we are loading each file's content from the working directory to perform rename detection. I have literally seen (and sadly watched) paint dry in less time than it takes for merge-recursive to finish such a merge. On the other hand this very same merge runs very fast on Solaris. If Git is compiled with NO_FAST_WORKING_DIRECTORY set then we will avoid looking at the working directory when the blob in question is available within a packfile and the caller doesn't need the data unpacked into a temporary file. We don't use loose objects as they have the same open/mmap/close costs as the working directory file access, but have the additional CPU overhead of needing to inflate the content before use. So it is still faster to use the working tree file over the loose object. If the caller needs the file data unpacked into a temporary file its likely because they are going to call an external diff program, passing the file as a parameter. In this case reusing the working tree file will be faster as we don't need to inflate the data and write it out to a temporary file. The NO_FAST_WORKING_DIRECTORY feature is enabled by default on Cygwin, as that is the platform which currently appears to benefit the most from this option. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
* js/show: git-show: grok blobs, trees and tags, too
-
- 14 12月, 2006 23 次提交
-
-
由 Johannes Schindelin 提交于
Since git-show is pure Porcelain, it is the ideal candidate to pretty print other things than commits, too. Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Sometimes it is asked on the list how to revert selected path in the index from a tree, most often HEAD, without affecting the files in the working tree. A similar operation that also affects the working tree files has been available in the form of "git checkout <tree> -- <paths>...". By definition --soft would never affect either the index nor the working tree files, and --hard is the way to make the working tree files as close to pristine, so this new option is available only for the default --mixed case. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
If you typically sit in, say "src/", it's annoying to have to change directory to do a reset. This may need to be reworked when we add "git reset -- paths..." to encapsulate the "ls-tree $tree | update-index --index-info" pattern. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Johannes Schindelin 提交于
Since a long time, we have inbuilt diff generation. Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
* maint: Bypass expensive content comparsion during rename detection.
-
由 Shawn O. Pearce 提交于
When comparing file contents during the second loop through a rename detection attempt we can skip the expensive byte-by-byte comparsion if both source and destination files have valid SHA1 values. This improves performance by avoiding either an expensive open/mmap to read the working tree copy, or an expensive inflate of a blob object. Unfortunately we still have to at least initialize the sizes of the source and destination files even if the SHA1 values don't match. Failing to initialize the sizes causes a number of test cases to fail and start reporting different copy/rename behavior than was expected. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Porcelain documentation should talk in terms of end-user workflow, not in terms of implementation details. Do not suggest update-index, but git-add instead. Explain differences among 0-, 1- and 2-tree cases not as differences of number of trees given to the command, but say why user would want to give these number of trees to the command in what situation. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
* jc/diff--cached: Revert "git-diff: Introduce --index and deprecate --cached."
-
由 Junio C Hamano 提交于
The list concensus is to group color related configuration under "color.*" so let's be consistent. Inspired by Andy Parkins's patch to do the same for diff/log family. With fixes from Eric Wong. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
... just like the other pack creating tools do. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Eric Wong 提交于
The low-level parts of the SVN library return NULL/undef for author-less revisions, whereas "(no author)" is a (svn) client convention. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
* jc/read-tree-ignore: read-tree: document --exclude-per-directory Loosen "working file will be lost" check in Porcelain-ish read-tree: further loosen "working file will be lost" check.
-
由 Junio C Hamano 提交于
* ew/rerere: rerere: record (or avoid misrecording) resolved, skipped or aborted rebase/am git-rerere: add 'gc' command. rerere: add clear, diff, and status commands
-
由 Junio C Hamano 提交于
* np/addcommit: git-commit: allow --only to lose what was staged earlier. Documentation/git-commit: rewrite to make it more end-user friendly. make 'git add' a first class user friendly interface to the index
-
由 Junio C Hamano 提交于
* lh/branch-rename: git-branch: let caller specify logmsg rename_ref: use lstat(2) when testing for symlink git-branch: add options and tests for branch renaming Conflicts: builtin-branch.c
-
由 Junio C Hamano 提交于
* jc/commit-careful: git-commit: show --summary after successful commit.
-
由 Junio C Hamano 提交于
* ap/clone-origin: Explicitly add the default "git pull" behaviour to .git/config on clone
-
由 Junio C Hamano 提交于
* jc/numstat: diff --numstat: show binary with '-' to match "apply --numstat"
-
由 Junio C Hamano 提交于
* rr/cvsexportcommit: Make cvsexportcommit work with filenames with spaces and non-ascii characters.
-
由 Junio C Hamano 提交于
* ap/branch: branch --color: change default color selection. Colourise git-branch output
-
由 Junio C Hamano 提交于
Showing local and remote branches in green and red was simply overkill, as all we wanted was to make it easy to tell them apart (local ones can be built on top by committing, but the remote tracking ones can't). Use plain coloring for local branches and paint remotes in red. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-