- 18 1月, 2007 8 次提交
-
-
由 Junio C Hamano 提交于
An incorrect config file can say: [format] headers and crash the parsing. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
The default can also be changed with "format.suffix" configuration. Leaving it empty would not add any suffix. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Add discussion section to git-checkout documentation and mention detached HEAD in repository-layout document. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 René Scharfe 提交于
Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 17 1月, 2007 18 次提交
-
-
由 Junio C Hamano 提交于
Clarify that this is not meant for end users, and list what shell functions are defined. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
... to match the change we did earlier to git-log documentation. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
In general list at Wiki seems to be maintained a lot better than this list. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Also warn about format=flowed (aka 'flawed'). Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Take it from the tutorial, since not everybody necessarily reads it. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Chris Wedgwood 提交于
Trivial patch. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Talking about what the files contain without talking about where they are does not help new users. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This allows "git checkout -m <other-branch>" to notice renames and carry local changes in the working tree forward. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
... which was fixed since then. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
* Promiscous pull shows the distributed nature of git better. * Add a new step after that to teach "remote add". * Highlight that with the shorthand defined you will get remote tracking branches for free. * Fix Alice's workflow. Signed-off-by: NSanti Béjar <sbejar@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Santi Béjar 提交于
Then the newbies only have to understand one layout. Signed-off-by: NSanti Béjar <sbejar@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Johannes Schindelin 提交于
From time to time, I would get this error: [...] sed: -e expression #8, char 41: Unterminated `s' command make: *** [git-add--interactive] Error 1 Turns out that the function WriteMakefile() called in Makefile.PL outputs the message "Writing perl.mak for Git" to stdout! Thus, the output of "make -C perl -s --no-print-directory instlibdir" would be prefixed by that message whenever Makefile.PL was newer than perl.mak. This is fixed by redirecting stdout to stderr in Makefile.PL. Signed-off-by: NJohannes E. Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
The example section were talking about the old broken default behaviour. Correct it. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Mention --thin, --no-thin, --repo and -v. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Uwe Kleine-K,Av(Bnig 提交于
The text is just copied from git-send-pack.txt. Signed-off-by: NUwe Kleine-K,Av(Bnig <zeisberg@informatik.uni-freiburg.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 16 1月, 2007 8 次提交
-
-
由 Eric Wong 提交于
People that redirect STDOUT output should always see STDERR prompts interactively. STDERR should always be flushed without buffering, so they should always show up. If that is unset, we still explicitly flush by calling STDERR->flush. The svn command-line client prompts to STDERR, too. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jason Riedy 提交于
The reflog code clears empty directories when rename returns either EISDIR or ENOTDIR. Seems to be the only place. Signed-off-by: NJason Riedy <ejr@cs.berkeley.edu> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jason Riedy 提交于
Not all echos know -n. This was causing a test failure in t5401-update-hooks.sh, but not t3800-mktag.sh for some reason. Signed-off-by: NJason Riedy <ejr@cs.berkeley.edu> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jason Riedy 提交于
AIX 5.3 seems to need _ALL_SOURCE for struct addrinfo, but that introduces a struct list in grp.h. Signed-off-by: NJason Riedy <ejr@cs.berkeley.edu> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jason Riedy 提交于
My bash refused to run the two scripts missing a #!, and it's better to use the same line for all the scripts. Signed-off-by: NJason Riedy <ejr@cs.berkeley.edu> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jeff King 提交于
Instead, we complain to the user and suggest that they explicitly specify the remote and branch. We depend on the exit status of git-symbolic-ref, so let's go ahead and document that. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
When we are on a detached HEAD, there is no current branch. There is no reason to leak the error messages to the end user since this is a situation we expect to see. This adds -q option to git-symbolic-ref to exit without issuing an error message if the given name is not a symbolic ref. By the way, with or without this patch, there currently is no good way to tell failure modes between "git symbolic-ref HAED" and "git symbolic-ref HEAD". Both says "is not a symbolic ref". We may want to do something about it. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 15 1月, 2007 6 次提交
-
-
git://git.kernel.org/pub/scm/gitk/gitk由 Junio C Hamano 提交于
* git://git.kernel.org/pub/scm/gitk/gitk: [PATCH] Make gitk work when launched in a subdirectory [PATCH] gitk: add current directory to main window title
-
由 Shawn O. Pearce 提交于
Always call the current HEAD 'HEAD', and name the patch being cherry-picked or reverted by its oneline subject rather than its SHA1. This matches git am's behavior and is done because users most commonly are cherry-picking by SHA1 rather than by ref name. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This makes revert and cherry-pick to use merge-recursive, to allow them to notice renames. A pair of test scripts demonstrate that an old change before a rename happened can be applied (reverted) after a rename with cherry-pick (with revert). Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
We've squelched output from merge-recursive, and git-merge when used with recursive does not attempt the trivial one first anymore, so there won't be "Trying ... Nope." messages now. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Shawn O. Pearce 提交于
Currently we don't use the util field of struct commit but we want fast access to the highest priority name that references any given commit object during our matching loop. A really simple approach is to just store the name directly in the util field. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Shawn O. Pearce 提交于
We really want to always favor an annotated tag over a lightweight tag when describing a commit. Unfortunately git-describe wasn't doing this as it was favoring the depth attribute of a possible_tag over the priority. Now priority is the highest sort and we only consider a lightweight tag if no annotated tags were identified. Rather than searching for the minimum tag using a simple loop we now sort them using a stable sort algorithm, this way the possible tags display in order if --debug gets used. The stable sort helps to preseve the inherit topology/date order that we obtain during our search loop. This fix allows the tests in t6120-describe.sh to pass. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-