* maint:
  l10n: de.po: fix a few minor typos

40bfbde9 ("build: don't duplicate substitution of make variables",
2012-09-11) by mistake removed a necessary comma at the end of
"CC_LD_DYNPATH=-Wl,rpath," in line 414.

When executing "./configure --with-zlib=PATH", this resulted in

      [...]
      CC xdiff/xhistogram.o
      AR xdiff/lib.a
      LINK git-credential-store
  /usr/bin/ld: bad -rpath option
  collect2: ld returned 1 exit status
  make: *** [git-credential-store] Error 1
  $

during make.
Signed-off-by: NØyvind A. Holm <sunny@sunbase.org>
Acked-by: NStefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

* 'maint' of git://github.com/git-l10n/git-po:
  l10n: de.po: fix a few minor typos

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The fsck test assumed too much on what kind of error it will
detect. The only important thing is the inconsistency is detected
as an error.

* jc/maint-t1450-fsck-order-fix:
  t1450: the order the objects are checked is undefined

"git fmt-merge-msg" (an internal helper reduce_heads() it uses) had
a severe performance regression; an empty "git pull" took forever to
finish as the result.

* jc/merge-bases-paint-fix:
  paint_down_to_common(): parse commit before relying on its timestamp

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

"git status" honored the ignore=dirty settings in .gitmodules but
"git commit" didn't.

* os/commit-submodule-ignore:
  commit: pay attention to submodule.$name.ignore in .gitmodules

"git receive-pack" (the counterpart to "git push") did not give
progress output while processing objects it received to the puser
when run over the smart-http protocol.

* jk/receive-pack-unpack-error-to-pusher:
  receive-pack: drop "n/a" on unpacker errors
  receive-pack: send pack-processing stderr over sideband
  receive-pack: redirect unpack-objects stdout to /dev/null

A repository created with "git clone --single" had its fetch
refspecs set up just like a clone without "--single", leading the
subsequent "git fetch" to slurp all the other branches, defeating
the whole point of specifying "only this branch".

* rt/maint-clone-single:
  clone --single: limit the fetch refspec to fetched branch

It was unclear in the documentation for "git blame" that it is
unnecessary for users to use the "--follow" option.

* jc/blame-follows-renames:
  git blame: document that it always follows origin across whole-file renames

A patch attached as application/octet-stream (e.g. not text/*) were
mishandled, not correctly honoring Content-Transfer-Encoding
(e.g. base64).

* lt/mailinfo-handle-attachment-more-sanely:
  mailinfo: don't require "text" mime type for attachments

Subversion's svn_dirent_canonicalize() and svn_path_canonicalize()
APIs keep a leading slash in the return value if one was present on
the argument, which can be useful since it allows relative and
absolute paths to be distinguished.

When git-svn's canonicalize_path() learned to use these functions if
available, its semantics changed in the corresponding way.  Some new
callers rely on the leading slash --- for example, if the slash is
stripped out then _canonicalize_url_ourselves() will transform
"proto://host/path/to/resource" to "proto://hostpath/to/resource".

Unfortunately the fallback _canonicalize_path_ourselves(), used when
the appropriate SVN APIs are not usable, still follows the old
semantics, so if that code path is exercised then it breaks.  Fix it
to follow the new convention.

Noticed by forcing the fallback on and running tests.  Without this
patch, t9101.4 fails:

 Bad URL passed to RA layer: Unable to open an ra_local session to \
 URL: Local URL 'file://homejrnsrcgit-scratch/t/trash%20directory.\
 t9101-git-svn-props/svnrepo' contains unsupported hostname at \
 /home/jrn/src/git-scratch/perl/blib/lib/Git/SVN.pm line 148

With it, the git-svn tests pass again.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NEric Wong <normalperson@yhbt.net>

All users of $gs->{path} should have been converted to use the
accessor by now.  Check our work by renaming the underlying variable
to break callers that try to use it directly.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NEric Wong <normalperson@yhbt.net>

The accessors should improve maintainability and enforce
consistent access to Git::SVN objects.
Signed-off-by: NEric Wong <normalperson@yhbt.net>
Reviewed-by: NJonathan Nieder <jrnieder@gmail.com>

When using the {word,[...]} style of configuration for tags and branches,
it appears the intent is to only match whole path parts, since the words
in the {} pattern are meta-character quoted.

When the pattern word appears in the beginning or middle of the url,
it's matched completely, since the left side, pattern, and (non-empty)
right side are joined together with path separators.

However, when the pattern word appears at the end of the URL, the
right side is an empty pattern, and the resulting regex matches
more than just the specified pattern.

For example, if you specify something along the lines of

    branches = branches/project/{release_1,release_2}

and your repository also contains "branches/project/release_1_2", you
will also get the release_1_2 branch.  By restricting the match regex
with anchors, this is avoided.
Signed-off-by: NAmmon Riley <ammon.riley@gmail.com>
Signed-off-by: NEric Wong <normalperson@yhbt.net>

This fixes `ambiguous redirect' error given by bash.

[ew: fix misspelled test name,
     also eliminate space after ">>" to conform to guidelines]
Signed-off-by: NEric Wong <normalperson@yhbt.net>

This fixes a bug where git finds the incorrect merge parent.  Consider a
repository with trunk, branch1 of trunk, and branch2 of branch1.
Without this change, git interprets a merge of branch2 into trunk as a
merge of branch1 into trunk.
Signed-off-by: NSteven Walter <stevenrwalter@gmail.com>
Reviewed-by: NSam Vilain <sam@vilain.net>
Signed-off-by: NEric Wong <normalperson@yhbt.net>

Consider the case where you have trunk, branch1 of trunk, and branch2 of
branch1.  trunk is merged back into branch2, and then branch2 is
reintegrated into trunk.  The merge of branch2 into trunk will have
svn:mergeinfo property references to both branch1 and branch2.  When
git-svn fetches the commit that merges branch2 (check_cherry_pick),
it is necessary to eliminate the merged contents of branch1 as well as
branch2, or else the merge will be incorrectly ignored as a cherry-pick.
Signed-off-by: NSteven Walter <stevenrwalter@gmail.com>
Reviewed-by: NSam Vilain <sam@vilain.net>
Signed-off-by: NEric Wong <normalperson@yhbt.net>

When refactoring the merge-base computation to reduce the pairwise
O(n*(n-1)) traversals to parallel O(n) traversals, the code forgot
that timestamp based heuristics needs each commit to have been
parsed.  This caused an empty "git pull" to spend cycles, traversing
the history all the way down to 0 (because an unparsed commit object
has 0 timestamp, and any other commit object with positive timestamp
will be processed for its parents, all getting parsed), only to come
up with a merge message to be used.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NSimon Ruderich <simon@ruderich.org>
Signed-off-by: NRalf Thielow <ralf.thielow@gmail.com>

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Teach the commands from the "log" family the "--grep-reflog" option
to limit output by string that appears in the reflog entry when the
"--walk-reflogs" option is in effect.

* nd/grep-reflog:
  revision: make --grep search in notes too if shown
  log --grep-reflog: reject the option without -g
  revision: add --grep-reflog to filter commits by reflog messages
  grep: prepare for new header field filter

A patch attached as application/octet-stream (e.g. not text/*) were
mishandled, not correctly honoring Content-Transfer-Encoding
(e.g. base64).

* lt/mailinfo-handle-attachment-more-sanely:
  mailinfo: don't require "text" mime type for attachments

"gc --auto" notified the user that auto-packing has triggered even
under the "--quiet" option.

* tu/gc-auto-quiet:
  silence git gc --auto --quiet output

When a tag T points at an object X that is of a type that is
different from what the tag records as, fsck should report it as an
error.

However, depending on the order X and T are checked individually,
the actual error message can be different.  If X is checked first,
fsck remembers X's type and then when it checks T, it notices that T
records X as a wrong type (i.e. the complaint is about a broken tag
T).  If T is checked first, on the other hand, fsck remembers that we
need to verify X is of the type tag records, and when it later
checks X, it notices that X is of a wrong type (i.e. the complaint
is about a broken object X).

The important thing is that fsck notices such an error and diagnoses
the issue on object X, but the test was expecting that we happen to
check objects in the order to make us detect issues with tag T, not
with object X.  Remove this unwarranted assumption.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

"git submodule frotz" was not diagnosed as "frotz" being an unknown
subcommand to "git submodule"; the user instead got a complaint that
"git submodule status" was run with an unknown path "frotz".

* rr/maint-submodule-unknown-cmd:
  submodule: if $command was not matched, don't parse other args

"git fetch" over http advertised that it supports "deflate", which
is much less common, and did not advertise more common "gzip" on its
Accept-Encoding header.

* sp/maint-http-enable-gzip:
  Enable info/refs gzip decompression in HTTP client

"git fetch" over http had an old workaround for an unlikely server
misconfiguration; it turns out that this hurts debuggability of the
configuration in general, and has been reverted.

* sp/maint-http-info-refs-no-retry:
  Revert "retry request without query when info/refs?query fails"

Fix bad translation of "Receiving objects".
Signed-off-by: NPeter Krefting <peter@softwolves.pp.se>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

It already is listed in the "git config" documentation, but people
interested in pushing would first look at "git push" documentation.

Noticed-by: David Glasser
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Acked-by: NMatthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Fixed-by: NJunio C Hamano <gitster@pobox.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NMichael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

* jk/completion-tests:
  t9902: add completion tests for "odd" filenames
  t9902: add a few basic completion tests

Fixes a brown-paper bag bug.

* ep/malloc-check-perturb:
  MALLOC_CHECK: enable it, unless disabled explicitly

The actual external command to run for mergetool backend can be
specified with difftool/mergetool.$name.cmd configuration
variables, but this mechanism was ignored for the backends we
natively support.

* da/mergetool-custom:
  mergetool--lib: Allow custom commands to override built-ins

"git status" honored the ignore=dirty settings in .gitmodules but
"git commit" didn't.

* os/commit-submodule-ignore:
  commit: pay attention to submodule.$name.ignore in .gitmodules