Signed-off-by: NŠtěpán Němec <stepnem@gmail.com>
Acked-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.

The current trend goes towards dashless forms, and there is precedent
in 647ac702 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.

Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.

Signed-off-by: NMarkus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Also fix some spellings and typos.
Signed-off-by: NMarkus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Use '{tilde}' instead of '~', becase the later does not appear in the
manpage version, just in the HTML one.

Noticed by gonzzor on IRC.
Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

This allows hooks like pre-receive to look at the client's IP
address.

Of course the IP address can't be used to get strong security;
git-daemon isn't the right thing to use if you need that. However,
basic IP address checking can be good enough in some situations.

REMOTE_ADDR is the same environment variable used to communicate the
client's address to CGI scripts.
Signed-off-by: NJoey Hess <joey@kitenet.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Get rid of the fixed array of children and make max-connections
dynamic and configurable.
Fix the killing code to actually kill the newest connections from
duplicate IP-addresses.
Avoid forking if too busy already.
Signed-off-by: NStephen R. van den Berg <srb@cuci.nl>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.

Using

	doit () {
	  perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
	}
	for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
	        merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
	do
	  doit <"$i" >"$i+" && mv "$i+" "$i"
	done
	git diff

.
Signed-off-by: NJonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.

While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: NJonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)

This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.

The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: NJonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

In the example inetd.conf lines in git-daemon(1), it was
assumed that `git-daemon` resides in the user's /usr/bin.
With this patch, we only assume `git` is in /usr/bin.

The stronger assumption fails in the default installation
nowadays.
Signed-off-by: NJonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The OPTIONS section of a documentation file contains a list
of the options a git command accepts.

Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.

Some are:

 -f, --foo::
 -f|--foo::
 -f | --foo::

But AsciiDoc has the special form:

 -f::
 --foo::

This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: NStephan Beyer <s-beyer@gmx.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: NChristian Couder <chriscool@tuxfamily.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The git-daemon upload-archive feature has always used the
config directive 'daemon.uploadarch'; the documentation
which came later seems to have just mistakenly used the
wrong name.

Noticed by lionel@over-blog.com.
Signed-off-by: NJeff King <peff@peff.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:

@@ -149,7 +153,10 @@
 # Inline macros.
 # Backslash prefix required for escape processing.
 # (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
 # Anchor: [[[id]]]. Bibliographic anchor.
 (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
 # Anchor: [[id,xreflabel]]

This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: NDan McGee <dpmcgee@gmail.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Now that 'git peek-remote' is deprecated and only an alias for
'git ls-remote', it should not be referenced from other manual pages.

This also removes the description of the --exec option, which is no
longer present.
Signed-off-by: NJohannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Jari Aalto noticed a handful places in git-daemon documentation
that need to be improved.

 * --inetd makes --pid-file to be ignored, in addition to --user
   and --group

 * receive-pack service was not described at all.  We should, if
   only to warn about the security implications of it.

 * There was no example of per repository configuration.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

I switched git.kernel.dk to --base-path a few minutes ago, to get rid of
a /data/git postfix in the posted urls. But transitioning is tricky,
since now all old paths will fail miserably.

So I added this --base-path-relaxed option, that will make git-daemon
try the absolute path without prefixing --base-path before giving up.
With this in place and --base-path-relaxed added, both my new url of

    git://git.kernel.dk/linux-2.6-block.git

and the old

    git://git.kernel.dk/data/git/linux-2.6-block.git

work fine.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time.  There are a few files that need
to have trailing whitespaces (most notably, test vectors).  The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Noticed by Franck Bui-Huu.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: NChristian Couder <chriscool@tuxfamily.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

This patch minimaly documents the upload-archive service,
hoping that someone with better knowledge will improve upon.
Signed-off-by: NChristian Couder <chriscool@tuxfamily.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

It is useless because --inetd implies --syslog.
Signed-off-by: NChristian Couder <chriscool@tuxfamily.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Standardized on lowercase hostnames from client.

Added interpolation values for the IP address, port and
canonical hostname of the server as it is contacted and
named by the client and passed in via the extended args.

Added --listen=host_or_ipaddr option suport.  Renamed port
variable as "listen_port" correspondingly as well.

Documented mutual exclusivity of --inetd option with
    --user, --group, --listen and --port options.

Added compat/inet_pton.c from Paul Vixie as needed.

Small memory leaks need to be cleaned up still.
Signed-off-by: NJon Loeliger <jdl@jdl.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: Jon Loeliger
Signed-off-by: NJunio C Hamano <junkio@cox.net>

This reverts parts of commit 74c0cc21 and part of commit 355f5412.

Franck and Rene are working on a unified upload-archive which
would supersede this when done, so better not to get in their
way.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: NTilman Sauerbeck <tilman@code-monkey.de>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: NMatthias Lederhofer <matled@gmx.net>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: NHorst H. von Brand <vonbrand@inf.utfsm.cl>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: NFredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Earlier, we made --base-path to automatically forbid
user-relative paths, which was probably a mistake.  This
introduces --user-path (or --user-path=path) option to control
the use of user-relative paths independently.  The latter form
of the option can be used to restrict accesses to a part of each
user's home directory, similar to "public_html" some webservers
supports.

If we're invoked with --user-path=FOO option, then a URL of the
form git://~USER/PATH/... resolves to the path HOME/FOO/PATH/...,
where HOME is USER's home directory.

[jc: This is much reworked by me so bugs are mine, but the
 original patch was done by Mark Wooding.]
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Tommi Virtanen expressed a wish on #git to be able to use short and elegant
git URLs by making git-daemon 'root' in a given directory. This patch
implements this, causing git-daemon to interpret all paths relative to
the given base path if any is given.
Signed-off-by: NPetr Baudis <pasky@suse.cz>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

In addition, also fixes a few synopses to be more consistent and a gitlink.
Signed-off-by: NJonas Fonseca <fonseca@diku.dk>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

 - Do validation only on canonicalized paths
 - Run upload-pack with "." as repository argument
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Dropped a fair amount of reundant code in favour of the library code
in path.c

Added option --strict-paths with documentation, with backwards
compatibility for whitelist entries with symlinks.

Everything that worked earlier still works insofar as I have
remembered testing it.
Signed-off-by: NAndreas Ericsson <ae@op5.se>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: NJunio C Hamano <junkio@cox.net>

Otherwise nothing is logged anywhere, which is a Bad Thing.
Signed-off-by: NAndreas Ericsson <ae@op5.se>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

New options --timeout, --init-timeout, --export-all and whitelist support
were added to git-daemon, but noone bothered to also add the proper
documentation. This patch aims to fix that.
Signed-off-by: NPetr Baudis <pasky@suse.cz>
Signed-off-by: NJunio C Hamano <junkio@cox.net>