- 04 12月, 2005 2 次提交
-
-
由 Fredrik Kuivinen 提交于
The test is considered OK if it exits with code $1 Signed-off-by: NFredrik Kuivinen <freku045@student.liu.se> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Fredrik Kuivinen 提交于
This way it is possible to test in scripts if the merge was non-clean or if the strategy had other problems with the merge. Signed-off-by: NFredrik Kuivinen <freku045@student.liu.se> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 03 12月, 2005 3 次提交
-
-
由 No name 提交于
[jc: light edit applied on top of the original] Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Use the same trick Josef used to introduce line breaks for git-mv documentation for now, to help HTML rendering. This breaks manpages and we need to come up with a better solution. Noticed by linux@horizon.com (No Name). Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 No name 提交于
[jc: light edit applied on top of the original] Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 02 12月, 2005 12 次提交
-
-
由 Junio C Hamano 提交于
This hopefully concludes the latest updates that changes the behaviour of the merge on an unsuccessful automerge. Instead of collapsing the conflicted path in the index to show HEAD, we leave it unmerged, now that diff-files can compare working tree files with higher stages. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
We ran "merge" command on O->A, O->B, A!=B case without verifying the path involved is not a symlink. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
The "update-index followed by checkout-index" chain served two purposes -- to collapse the index to "our" version, and make sure that file exists in the working tree. In the recent update to leave the index unmerged on conflicting path, we wanted to stop doing the former, but we still need to do the latter (we allow merging to work in an un-checked-out working tree). Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
You need to pass -t flag if you want to see tree objects in "git-ls-tree -r" output these days. This change broke the tree structure reading code in git-merge-recursive used to detect D/F conflicts. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Alex Riesen 提交于
- Use stderr for error output - Build git_command more careful - ENOENT is good enough for check of failed exec to show usage, no access() check needed [jc: Originally from Alex Riesen with inputs from Sven Verdoolaege mixed in.] Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
9ae2172a used "rmdir -p" carelessly, causing the more important "git-update-index --remove" to be skipped. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Fingers of some "git diff" users are trained to do --name-only which git-ls-tree unfortunately does not take. With this, cd sub/directory && git-ls-tree -r --name-only .. would show only the names not object names nor modes. I threw in another synonym --name-status only for usability, but obviously ls-tree does not do any comparison so what it does is the same as --name-only. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
With this: git-ls-tree -d HEAD -- drivers/net/ shows only immediate subtrees of drivers/net. git-ls-tree -d -t HEAD -- drivers/net/ shows drivers, drivers/net and immediate subtrees of drivers/net. git-ls-tree -d -r HEAD -- drivers/net/ shows drivers, drivers/net and all subtrees of drivers/net (but not blobs). Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Linus Torvalds 提交于
The old (new) behaviour was that it only shows trees if the object is specified exactly, and recursive is not set. That makes sense, because there is obviously nothing else it can show for that case. However, with the new "-t" option, it will show the tree even with "-r", as it traverses down into it. NOTE! This also means that it will show all trees leading up to that tree. For example, if you do a git-ls-tree -t HEAD -- drivers/char/this/file/does/not/exist it will show the trees that lead up to the files that do not exist: [torvalds@g5 linux]$ git-ls-tree -t HEAD -- drivers/char/this/file/does/not/exist 040000 tree 9cb687b77dcd64bf82e9a73214db467c964c1266 drivers 040000 tree 298e2fadf0ff3867d1ef49936fd2c7bf6ce1eb66 drivers/char [torvalds@g5 linux]$ and note how this is true even though I didn't specify "-r": the fact that I supplied a pathspec automatically implies "enough recursion" for that particular pathspec. I think the code is cleaner and easier to understand too: the patch looks bigger, but it's really just splitting up the "should we recurse into this tree" into a function of its own. Signed-off-by: NLinus Torvalds <torvalds@osdl.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Alex Riesen wants to keep extra makefile targets in config.mak, but the file is included before any of our real targets. Having this at the beginning allows you to do so. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
The option description header was there without body text, confusingly getting rendered as if the description for --tags applied to the option. Noticed by Carl Baldwin. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 01 12月, 2005 4 次提交
-
-
由 Timo Hirvonen 提交于
This makes it possible to define WITH_SEND_EMAIL etc. in config.mak. Also remove GIT_LIST_TWEAK because it isn't used anymore. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
-
由 Junio C Hamano 提交于
-
由 Tommi Virtanen 提交于
Dereference the environment variable before using it. Signed-off-by: NTommi Virtanen <tv@inoi.fi> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 30 11月, 2005 18 次提交
-
-
由 Junio C Hamano 提交于
Current default, merge-recursive, gives slightly different message while working from merge-resolve which was used to prepare the illustration in the tutorial. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This minimally changes merge-recursive to match what happens when O->A, O->B, A!=B 3-way filelevel merge leaves conflicts to the new merge-resolve behaviour. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
After thinking about it more, I realized that much of the change I did on top of Linus' version does not make much sense. This commit reverts it so that it by default shows diffs with stage0 paths or stage2 paths with working tree; the unmerged stage to use can be overridden with -1/-2/-3 option (-2 is the default so essentially is a no-op). When the index file is unmerged, we are by definition in the middle of a conflicting merge, and we should show the diff with stage 2 by default. More importantly, paths without conflicts are updated in the working tree and collapsed to stage0 in the index, so showing diff with stage0 at the same time does not hurt. In normal cases, stage0 entries should be in sync with the working tree files and does not clutter the output. It even helps the user to realize that the working tree has local changes unrelated to the merge and remember to be careful not to do a "git-commit -a" after resolving the conflicts. When there is no unmerged entries, giving diff_unmerged_stage a default value of 2 does not cause any harm, because it would not be used anyway. So in all, always showing diff between stage0 paths and unmerged entries from a stage (defaulting to 2) is the right thing to do, as Linus originally did. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Linus Torvalds 提交于
When automerge fails, we used to collapse the path to stage0 from "our" branch, to help "diff-files" users to view the half-merged state against the current HEAD. Now diff-files has been taught how to compare with unmerged stage2,leaving them unmerged is a better thing to do, especially this prevents the unresolved conflicts to be committed by mistake. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Linus Torvalds 提交于
While resolving conflicted merge, it was not easy to compare the working tree file with unmerged index entries. This commit introduces new options -1/-2/-3 (with synonyms --base, --ours, and --theirs) to compare working tree files with specified stages. When none of these options are given, the command defaults to -2 if the index file is unmerged, otherwise it acts as before. [jc: majorly butchered from the version Linus originally posted.] Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
When the user gives a diff option (e.g. --cached) to "git diff", we turned off the built-in default option -p, which is usually not what user wants to see. This commit makes lack of --name-status, --name-only nor -r to add -p, and lack of -B*, -C* nor -M* to add -M to the flags given to the underlying diff. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
-
由 Alex Riesen 提交于
Junio C Hamano, Sat, Nov 26, 2005 03:45:52 +0100: > I haven't seriously used git-mv myself, so > somebody needs to test it, and if it actually works and Ack on > it, please. It actually works in subdirs. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Johannes Schindelin 提交于
Turns out, all git programs git-mv uses are capable of operating in a subdirectory just fine. So don't complain about it. [jc: I think that sounds sane. You need to grab the exit status from `git-rev-parse --git-dir`, which I added. Alex Riesen says this worked fine.] Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Paul Mackerras 提交于
There is a lot more that could be put in, such as a selector for the font family etc., but this is a start. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Junio C Hamano 提交于
Otherwise it would show incomplete line and binary markers in a locale dependent way. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Before GIT version at the end of output we used a 3-dash marker; but 3-dash marker is special and should not be overused. Instead, use "-- " which is a standard practice in e-mails to signal the beginning of trailing garbage. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
The attempt to help 3-way fallback by recording the tree object id for the entire pre-image was unnecessary, and we already have an better alternative in the form of per-blob "index" lines. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This matches the 3-way fallback used by applypatch to use per-blob "index" lines, not "applies-to" tree object name, to match what git-am does. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
The -m option to fall back on 3-way merge was not honoured at all because of a typo. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Matthias Urlichs 提交于
One "svn log" (or its equivalent) per revision adds delay and server load. Instead, open two SVN connections -- one for the log, and one for the files. Positive side effect: Only those log entries which actually contain data are committed => no more empty commits. Also, change the "-l" option to set the maximum revision to be pulled, not the number of revisions. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 jdl@freescale.com 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nick Hengeveld 提交于
The malloc patch from Jan Andres fixed the problem that was causing a segfault when freeing the lock token, and Johannes Schindelin found and fixed a problem when no URL is specified on the command line. Signed-off-by: NNick Hengeveld <nickh@reactrix.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 29 11月, 2005 1 次提交
-
-
由 Pavel Roskin 提交于
The "--shared" option to git-clone is silently ignored if "--local" is not specified. The manual doesn't mention such dependency. Make "--shared" imply "--local". Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-