- 17 4月, 2008 3 次提交
-
-
由 Junio C Hamano 提交于
* maint-1.5.4: git-am: minor cleanup Clarify and fix English in "git-rm" documentation
-
由 Junio C Hamano 提交于
This moves the assignment to FIRSTLINE down so that we do not have to have multiple copies. Suggested by Linus. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jon Loeliger 提交于
Do some verb-noun agreement changes. Clarify some file globbing cases. Fixed a wrong statement in an example. Signed-off-by: NJon Loeliger <jdl@jdl.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 16 4月, 2008 7 次提交
-
-
由 Junio C Hamano 提交于
* maint-1.5.4: git-bisect: make "start", "good" and "skip" succeed or fail atomically git-am: cope better with an empty Subject: line Ignore leading empty lines while summarizing merges bisect: squelch "fatal: ref HEAD not a symref" misleading message builtin-apply: Show a more descriptive error on failure when opening a patch Clarify documentation of git-cvsserver, particularly in relation to git-shell
-
由 Christian Couder 提交于
Before this patch, when "git bisect start", "git bisect good" or "git bisect skip" were called with many revisions, they could fail after having already marked some revisions as "good", "bad" or "skip". This could be especilally bad for "git bisect start" because as the file ".git/BISECT_NAMES" would not have been written, there would have been no attempt to clear the marked revisions on a "git bisect reset". That's because if there is no ".git/BISECT_NAMES" file, nothing is done to clean things up, as the bisect session is not supposed to have started. While at it, let's also create the ".git/BISECT_START" file, only after ".git/BISECT_NAMES" as been created. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Linus Torvalds 提交于
When the Subject: line is empty for whatever reason, git-am was fooled by it and left an empty line at the beginning of the resulting commit log message. This moves the logic around so that we do not keep $SUBJECT in a separate variable. Instead, $dotest/msg-clean, which used to be the log message body extracted from the message and then trailing whitespaces cleansed out, now contains the subject line followed by a blank line at the beginning for normal messages, and we use the first line from the file as the summary line throughout the program. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Linus Torvalds 提交于
"git log" and friends normally skip the initial empty lines when showing one-line summary of a commit, but merge summary didn't. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> ---- builtin-fmt-merge-msg.c | 10 +++++++++- 1 files changed, 9 insertions(+), 1 deletions(-) Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
To get the current HEAD when we start bisecting using for example "git bisect start", we first try "git symbolic-ref HEAD" to get a nice name, and if it fails, we fall back to "git rev-parse --verify HEAD". The problem is that when "git symbolic-ref HEAD" fails, it displays "fatal: ref HEAD not a symref", so it looks like "git bisect start" failed and does not accept detached HEAD, even if in fact it worked fine. This patch adds "-q" option to the "git symbolic-ref" call to get rid of the misleading error message. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Alberto Bertogli 提交于
When a patch can't be opened (it doesn't exist, there are permission problems, etc.) we get the usage text, which is not a proper indication of failure. Signed-off-by: NAlberto Bertogli <albertito@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Scott Collins 提交于
For SSH clients restricted to git-shell, CVS_SERVER does not have to be specified, because git-shell understands the default value of 'cvs' to mean git-cvsserver'. This makes it totally transparent to CVS users, but the instruction to set up CVS access for people with real shell access does not apply. Previous wording mentioning GIT_AUTHOR, GIT_COMMITTER variables was unclear that we really meant GIT_AUTHOR_(NAME|EMAIL), etc. Note that the .ssh/environment file is a good place to set these, and that the .bashrc is shell-specific. Add a bit of text to differentiate cvs -d (setting CVSROOT) from cvs co -d (setting the name of the newly checked out directory). Removed an extra 'Example:' string. Signed-off-by: NScott Collins <scc@ScottCollins.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 15 4月, 2008 3 次提交
-
-
由 Shawn Bohrer 提交于
Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Shawn Bohrer 提交于
When git clean is run from a subdirectory it should follow the normal policy and only remove directories if they are passed in as a pathspec, or -d is specified. The fix is to send len which could be shorter than ent->len because we have stripped the trailing '/' that read_directory adds. Additionaly match_one() was modified to allow a name[] that is not NUL terminated. This allows us to check if the name matched the pathspec exactly instead of recursively. Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Mark Levedahl 提交于
This changes the search logic for describing a submodule from: - annotated tag - any tag - tag on a subsequent commit - commit id to - annotated tag - any tag - tag on a subsequent commit - local or remote branch - commit id The change is describing with respect to a branch before falling back to the commit id. By itself, git-submodule will maintain submodules as headless checkouts without ever making a local branch. In general, such heads can always be described relative to the remote branch regardless of existence of tags, and so provides a better fallback summary than just the commit id. This requires inserting an extra describe step as --contains is incompatible with --all, but the latter can be used with --always to fall back to a commit ID. Also, --contains implies --tags, so the latter is not needed. Signed-off-by: NMark Levedahl <mlevedahl@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 13 4月, 2008 7 次提交
-
-
由 Junio C Hamano 提交于
The script had an unconditional output done outside of test_expect_* construct, which leaked out and contaminated the output without -v. Squelch it. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Daniel Barkalow 提交于
Also tighten test to require it to be correct. Signed-off-by: NDaniel Barkalow <barkalow@iabervon.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint-1.5.4: Docs gitk: Explicitly mention the files that gitk uses (~/.gitk) Document -w option to shortlog bisect: report bad rev better
-
由 Clifford Caoile 提交于
gitk creates and uses ~/.gitk Signed-off-by: NClifford Caoile <piyo@users.sourceforge.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Noticed by Fredrik Noring. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
The previous one overwrote the variable used to report the bad input when the input is actually bad, and we did not give a useful enough information. This corrects it. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 12 4月, 2008 8 次提交
-
-
由 Junio C Hamano 提交于
* maint-1.5.4: bisect: fix bad rev checking in "git bisect good" revision.c: make --date-order overriddable Fix section about backdating tags in the git-tag docs Document option --only of git commit Documentation/git-request-pull: Fixed a typo ("send" -> "end")
-
由 Christian Couder 提交于
It seems that "git bisect good" and "git bisect skip" have never properly checked arguments that have been passed to them. As soon as one of them can be parsed as a SHA1, no error or warning would be given. This is because 'git rev-parse --revs-only --no-flags "$@"' always "exit 0" and outputs all the SHA1 it can found from parsing "$@". This patch fix this by using, for each "bisect good" argument, the same logic as for the "bisect bad" argument. While at it, this patch teaches "bisect bad" to give a meaningfull error message when it is passed more than one argument. Note that if "git bisect good" or "git bisect skip" is given some proper revs and then something that is not a proper rev, then the first proper revs will still have been marked as "good" or "skip". Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michele Ballabio 提交于
Jan Engelhardt noticed that while --topo-order can be overridden by a subsequent --date-order, the reverse was not possible. That's because setup_revisions() failed to set revs->lifo properly. Signed-off-by: NMichele Ballabio <barra_cuda@katamail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ping Yin 提交于
When "git submodule status" command tries to show the name of the submodule HEAD revision more descriptively, but the submodule repository lacked a suitable tag to do so, it leaked "fatal: cannot describe" message to the UI. Squelch it by using '--always'. Signed-off-by: NPing Yin <pkufranky@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Pedro Melo 提交于
If a user has customized format.pretty in config, git-svn rebase fails with: Unable to determine upstream SVN information from working tree history because the command expects to read the commit log in the default format. This fixes the command to explicitly ask for the format it wants to read from. Signed-off-by: NPedro Melo <melo@simplicidade.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Björn Steinbrink 提交于
The tagger is equal to the committer, not the author, so GIT_COMMITTER_DATE is the right environment variable to use, not GIT_AUTHOR_DATE. Signed-off-by: NBjörn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Johannes Sixt 提交于
Its documentation was removed by 6c96753d (Documentation/git-commit: rewrite to make it more end-user friendly, 2006-12-08), even though it is referenced from a few places, including builtin-commit.c (as part of the commentary in the commit message template). Signed-off-by: NJohannes Sixt <johannes.sixt@telecom.at> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Dirk Suesserott 提交于
Signed-off-by: NDirk Suesserott <newsletter@dirk.my1.cc> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 10 4月, 2008 5 次提交
-
-
由 Jeff King 提交于
There was code in update_local_ref for handling this case, but it never actually got called. It assumed that storing in FETCH_HEAD meant a blank peer_ref name, but we actually have a NULL peer_ref in this case, so we never even made it to the update_local_ref function. On top of that, the display formatting was different from all of the other cases, probably owing to the fact that nobody had ever actually seen the output. This patch harmonizes the output with the other cases and moves the detection of this case into store_updated_refs, where we can actually trigger it. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint-1.5.4: core-tutorial.txt: Fix showing the current behaviour. git-archive: ignore prefix when checking file attribute Fix documentation syntax of optional arguments in short options.
-
由 Carlos Rica 提交于
The --root option from "git diff-tree" won't do nothing when is given to commands like git-whatchanged or git-log, because those always print the initial commit by default. This fixes the tutorial explaining the function of the log.showroot configuration variable. Signed-off-by: NCarlos Rica <jasampler@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
Ulrik Sverdrup noticed that git-archive doesn't correctly apply the attribute export-subst when the option --prefix is given, too. When it checked if a file has the attribute turned on, git-archive would try to look up the full path -- including the prefix -- in .gitattributes. That's wrong, as the prefix doesn't need to have any relation to any existing directories, tracked or not. This patch makes git-archive ignore the prefix when looking up if value of the attribute export-subst for a file. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Carlos Rica 提交于
When an argument for an option is optional, like in -n from git-tag, puting a space between the option and the argument is interpreted as a missing argument for the option plus an isolated argument. Documentation now reflects the need to write the parameter following the option -n, as in "git tag -nARG", for instance. Signed-off-by: NCarlos Rica <jasampler@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 08 4月, 2008 2 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
git://git.kernel.org/pub/scm/gitk/gitk由 Junio C Hamano 提交于
* git://git.kernel.org/pub/scm/gitk/gitk: gitk: Fix changing colors through Edit->Preferences
-
- 07 4月, 2008 5 次提交
-
-
由 Eric Wong 提交于
When using git-svn to follow only a single (empty) path per svn-remote (i.e. not using --stdlayout), following the history of a renamed path was broken in c586879c. This reverts the regression for the single (emtpy) path per svn-remote case. To avoid breaking the tests in a committed revision, this is an addendum to a patch originally submitted by Santhosh Kumar Mani <santhoshmani@gmail.com>: > git-svn: add test for renamed directory fetch > > This test tries to fetch a directory which had renames in the > history from a SVN repository. [ew: unneccesary dependency on the starting an HTTP server removed from Santhosh's original test.] Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* jc/maint-apply-match-beginning: Fix "git apply" to correctly enforce "match at the beginning"
-
由 Pascal Obry 提交于
Signed-off-by: NPascal Obry <pascal@obry.net> Acked-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
In commit 15387e32 (Test suite: reset TERM to its previous value after testing., 2007-10-26), I added a workaround to reset TERM to its previous value before the "test_done" at the end of "t7005-editor.sh" because otherwise "test_done" would have printed the test result with a bad TERM env variable (this resulted in output with no color on konsole). But since commit c2116a17 (test-lib: fix TERM to dumb for test repeatability, 2008-03-06), colored output is printed in a subshell with TERM reset to its original value so the earlier workaround is not needed anymore. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Pascal Obry 提交于
Signed-off-by: NPascal Obry <pascal@obry.net> Acked-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-