- 11 7月, 2014 3 次提交
-
-
由 Junio C Hamano 提交于
* pb/trim-trailing-spaces: t0008: do not depend on 'echo' handling backslashes specially dir.c:trim_trailing_spaces(): fix for " \ " sequence
-
由 Junio C Hamano 提交于
* jk/repack-pack-keep-objects: repack: s/write_bitmap/&s/ in code repack: respect pack.writebitmaps repack: do not accidentally pack kept objects by default
-
由 Junio C Hamano 提交于
* mc/doc-submodule-sync-recurse: submodule: document "sync --recursive"
-
- 03 7月, 2014 3 次提交
-
-
由 Junio C Hamano 提交于
* maint-1.8.5: t7300: repair filesystem permissions with test_when_finished enums: remove trailing ',' after last item in enum
-
由 Jeff King 提交于
We create a directory that cannot be removed, confirm that it cannot be removed, and then fix it like: chmod 0 foo && test_must_fail git clean -d -f && chmod 755 foo If the middle step fails but leaves the directory (e.g., the bug is that clean does not notice the failure), this pollutes the test repo with an unremovable directory. Not only does this cause further tests to fail, but it means that "rm -rf" fails on the whole trash directory, and the user has to intervene manually to even re-run the test script. We can bump the "chmod 755" recovery to a test_when_finished block to be sure that it always runs. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ronnie Sahlberg 提交于
Signed-off-by: NRonnie Sahlberg <sahlberg@google.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 26 6月, 2014 29 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
The mode to run tests with HTTP server tests disabled was broken. * na/no-http-test-in-the-middle: t5538: move http push tests out to t5542
-
由 Junio C Hamano 提交于
"git status" (and "git commit") behaved as if changes in a modified submodule are not there if submodule.*.ignore configuration is set, which was misleading. The configuration is only to unclutter diff output during the course of development, and should not to hide changes in the "status" output to cause the users forget to commit them. * jl/status-added-submodule-is-never-ignored: commit -m: commit staged submodules regardless of ignore config status/commit: show staged submodules regardless of ignore config
-
由 Junio C Hamano 提交于
"git status", even though it is a read-only operation, tries to update the index with refreshed lstat(2) info to optimize future accesses to the working tree opportunistically, but this could race with a "read-write" operation that modify the index while it is running. Detect such a race and avoid overwriting the index. * ym/fix-opportunistic-index-update-race: read-cache.c: verify index file before we opportunistically update it wrapper.c: add xpread() similar to xread()
-
由 Junio C Hamano 提交于
"git show -s" (i.e. show log message only) used to incorrectly emit an extra blank line after a merge commit. * mk/show-s-no-extra-blank-line-for-merges: git-show: fix 'git show -s' to not add extra terminator after merge commit
-
由 Junio C Hamano 提交于
The autostash mode of "git rebase -i" did not restore the dirty working tree state if the user aborted the interactive rebase by emptying the insn sheet. * rr/rebase-autostash-fix: rebase -i: test "Nothing to do" case with autostash rebase -i: handle "Nothing to do" case with autostash
-
由 Junio C Hamano 提交于
"git log --exclude=<glob> --all | git shortlog" worked as expected, but "git shortlog --exclude=<glob> --all", which is supposed to be identical to the above pipeline, was not accepted at the command line argument parser level. * jc/shortlog-ref-exclude: shortlog: allow --exclude=<glob> to be passed
-
由 Junio C Hamano 提交于
"git remote rm" and "git remote prune" can involve removing many refs at once, which is not a very efficient thing to do when very many refs exist in the packed-refs file. * jl/remote-rm-prune: remote prune: optimize "dangling symref" check/warning remote: repack packed-refs once when deleting multiple refs remote rm: delete remote configuration as the last
-
由 Junio C Hamano 提交于
"git rerere forget" did not work well when merge.conflictstyle was set to a non-default value. * fc/rerere-conflict-style: rerere: fix for merge.conflictstyle
-
由 Junio C Hamano 提交于
"git pack-objects" unnecessarily copied the previous contents when extending the hashtable, even though it will populate the table from scratch anyway. * rs/pack-objects-no-unnecessary-realloc: pack-objects: use free()+xcalloc() instead of xrealloc()+memset()
-
由 Junio C Hamano 提交于
On a case insensitive filesystem, merge-recursive incorrectly deleted the file that is to be renamed to a name that is the same except for case differences. * dt/merge-recursive-case-insensitive: mv: allow renaming to fix case on case insensitive filesystems merge-recursive.c: fix case-changing merge bug
-
由 Junio C Hamano 提交于
"git mailinfo" used to read beyond the end of header string while parsing an incoming e-mail message to extract the patch. * rs/mailinfo-header-cmp: mailinfo: use strcmp() for string comparison
-
由 Junio C Hamano 提交于
The error reporting from "git index-pack" has been improved to distinguish missing objects from type errors. * jk/index-pack-report-missing: index-pack: distinguish missing objects from type errors
-
由 Junio C Hamano 提交于
We used to disable threaded "git index-pack" on platforms without thread-safe pread(); use a different workaround for such platforms to allow threaded "git index-pack". * nd/index-pack-one-fd-per-thread: index-pack: work around thread-unsafe pread()
-
由 Junio C Hamano 提交于
"git grep -O" to show the lines that hit in the pager did not work well with case insensitive search. We now spawn "less" with its "-I" option when it is used as the pager (which is the default). * sk/spawn-less-case-insensitively-from-grep-O-i: git grep -O -i: if the pager is 'less', pass the '-I' option
-
由 Junio C Hamano 提交于
"git gc --auto" was recently changed to run in the background to give control back early to the end-user sitting in front of the terminal, but it forgot that housekeeping involving reflogs should be done without other processes competing for accesses to the refs. * nd/daemonize-gc: gc --auto: do not lock refs in the background
-
由 Junio C Hamano 提交于
"git format-patch" did not enforce the rule that the "--follow" option from the log/diff family of commands must be used with exactly one pathspec. * jk/diff-follow-must-take-one-pathspec: move "--follow needs one pathspec" rule to diff_setup_done
-
由 Junio C Hamano 提交于
"git diff --find-copies-harder" sometimes pretended as if the mode bits have changed for paths that are marked with assume-unchanged bit. * jk/diff-files-assume-unchanged: run_diff_files: do not look at uninitialized stat data
-
由 Junio C Hamano 提交于
"git commit --allow-empty-message -C $commit" did not work when the commit did not have any log message. * jk/commit-C-pick-empty: commit: do not complain of empty messages from -C
-
由 Junio C Hamano 提交于
"git blame" assigned the blame to the copy in the working-tree if the repository is set to core.autocrlf=input and the file used CRLF line endings. * bc/blame-crlf-test: blame: correctly handle files regardless of autocrlf
-
由 Junio C Hamano 提交于
"git blame" miscounted number of columns needed to show localized timestamps, resulting in jaggy left-side-edge of the source code lines in its output. * jx/blame-align-relative-time: blame: dynamic blame_date_width for different locales blame: fix broken time_buf paddings in relative timestamp
-
由 Junio C Hamano 提交于
"--ignore-space-change" option of "git apply" ignored the spaces at the beginning of line too aggressively, which is inconsistent with the option of the same name "diff" and "git diff" have. * jc/apply-ignore-whitespace: apply --ignore-space-change: lines with and without leading whitespaces do not match
-
由 Junio C Hamano 提交于
The completion scripts (in contrib/) did not know about quite a few options that are common between "git merge" and "git pull", and a couple of options unique to "git merge". * jk/complete-merge-pull: completion: add missing options for git-merge completion: add a note that merge options are shared
-
由 Junio C Hamano 提交于
The "mailmap.file" configuration option did not support the tilde expansion (i.e. ~user/path and ~/path). * ow/config-mailmap-pathname: config: respect '~' and '~user' in mailmap.file
-
由 Junio C Hamano 提交于
The "%<(10,trunc)%s" pretty format specifier in the log family of commands is used to truncate the string to a given length (e.g. 10 in the example) with padding to column-align the output, but did not take into account that number of bytes and number of display columns are different. * as/pretty-truncate: pretty.c: format string with truncate respects logOutputEncoding t4205, t6006: add tests that fail with i18n.logOutputEncoding set t4205 (log-pretty-format): use `tformat` rather than `format` t4041, t4205, t6006, t7102: don't hardcode tested encoding value t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
-
由 Junio C Hamano 提交于
"git log -2master" is a common typo that shows two commits starting from whichever random branch that is not 'master' that happens to be checked out currently. * jc/revision-dash-count-parsing: revision: parse "git log -<count>" more carefully
-
由 Junio C Hamano 提交于
Reworded the error message given upon a failure to open an existing loose object file due to e.g. permission issues; it was reported as the object being corrupt, but that is not quite true. * jk/report-fail-to-read-objects-better: open_sha1_file: report "most interesting" errno
-
由 Junio C Hamano 提交于
Tools that read diagnostic output in our standard error stream do not want to see terminal control sequence (e.g. erase-to-eol). Detect them by checking if the standard error stream is connected to a tty. * mn/sideband-no-ansi: sideband.c: do not use ANSI control sequence on non-terminal
-
由 Junio C Hamano 提交于
We used to unconditionally disable the pager in the pager process we spawn to feed out output, but that prevented people who want to run "less" within "less" from doing so. * je/pager-do-not-recurse: pager: do allow spawning pager recursively
-
- 14 6月, 2014 2 次提交
-
-
由 Matthew Chen 提交于
The "git submodule sync" command supports the --recursive flag, but the documentation does not mention this. That flag is useful, for example when a remote is changed in a submodule of a submodule. Signed-off-by: NMatthew Chen <charlesmchen@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
The original used to pass with /bin/dash but not with /bin/bash set to $SHELL_PATH. The former turns "\\" into "\", but the latter does not. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 13 6月, 2014 2 次提交
-
-
由 Junio C Hamano 提交于
* jc/rev-parse-argh-dashed-multi-words: update-index: fix segfault with missing --cacheinfo argument
-
由 Jacek Konieczny 提交于
It is not C. The code would break under mksh when 'pull.ff' is set: $ git pull /usr/lib/git-core/git-pull[67]: break: can't break Already up-to-date. Signed-off-by: NJacek Konieczny <jajcus@jajcus.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 11 6月, 2014 1 次提交
-
-
由 Jeff King 提交于
The config name is "writeBitmaps", so the internal variable missing the plural is unnecessarily confusing to write. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-