- 29 11月, 2005 7 次提交
-
-
由 Linus Torvalds 提交于
To get more a "git-ls-files" approach, this trivial patch (on top of my previous one) enables recursion, and doesn't show partial trees. [jc: after further discussion, this version enables recursion by default, and you can disable it with "-d" flag. git-ls-tree -d HEAD Documentation/no/such/directory shows Documentation tree (without -d it shows nothing). git-ls-tree HEAD shows everything from the tree. Only to get the single level from the top git-ls-tree -d HEAD is needed. But there is no way to get the single level with pathspec. You need to extract the object name of Documentation tree from the parent tree and run git-ls-tree -d $tree_id_of_Documentation_tree to get something similar to what you can get from the current git-ls-tree HEAD Documentation ]
-
由 Linus Torvalds 提交于
git-ls-tree should be rewritten to use a pathspec the same way everybody else does. Right now it's the odd man out: if you do git-ls-tree HEAD divers/char drivers/ it will show the same files _twice_, which is not how pathspecs in general work. How about this patch? It breaks some of the git-ls-tree tests, but it makes git-ls-tree work a lot more like other git pathspec commands, and it removes more than 150 lines by re-using the recursive tree traversal (but the "-d" flag is gone for good, so I'm not pushing this too hard). Linus
-
由 Junio C Hamano 提交于
This is to prepare for ls-tree updates. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
In git-merge documentation, add a section to describe what happens to the index and working tree during merge, and what their cleanliness requirements are before the merge. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jan Andres 提交于
Typo resulted in accessing past the beginning of a string causing segfaults. [jc: signoffs?]
-
由 Junio C Hamano 提交于
Noticed by linux@horizon.com. The first merge parent (typically "our branch") is ^1, not ^0, and the first other branch is ^2. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
When a .dotest from a previously failed rebase or patch application exists, rebase got confused and tried to apply mixture of what was already there and what is being rebased. Check the existence of the directory and barf. It failed with an mysterious "fatal: cannot read mbox" message if the branch being rebased is fully in sync with the base. Also if the branch is a proper descendant of the base, there is no need to run rebase logic. Prevent these from happening by checking where the merge-base is. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 28 11月, 2005 16 次提交
-
-
-
由 Junio C Hamano 提交于
Noticed and fixed by Matthias Urlichs and Josef Weidendorfer. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Hardcoding "utf-8" in the script breaks projects that use local encoding, so allow setting i18n.commitEncoding. Signed-off-by: NJunio C Hamano <junkio@cox.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Paul Mackerras 提交于
The change in 8b7e5d76, which makes a couple of git-diff-tree calls supply only one id rather than two, fixes the display when showing what a single commit did with dense revlists, but broke the diff this->selected and diff selected->this right-click menu functions. Yann Dirson pointed this out and had a patch that fixed the diff menu functions by passing a "singlecommit" flag around. This fixes it a bit differently, by making the ids and diffids variables be either a single id, in the case of showing what a commit did, or {oldid newid}, in the case of the diff menu functions. That way we can just pass $ids to git-diff-tree as is. Most of the changes in fact are just reversing the order of ids in $ids and $diffids, because they used to be {child parent}, but git-diff-tree requires old id before new id. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Junio C Hamano 提交于
Specifying the value for a single letter, single dash option parameter with equal sign looked funny, and more importantly calling the flag to override encoding from utf-8 to something else "-u" (obviously abbreviated from "utf-8") did not make any sense. So spell it out. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This uses i18n.commitencoding configuration item to pick up the default commit encoding for the repository when converting form e-mail encoding to commit encoding (the default is utf8). Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
When the message body does not identify what encoding it is in, -u assumes it is in latin-1 and converts it to utf8, which is the recommended encoding for git commit log messages. With -u=<encoding>, the conversion is made into the specified one, instead of utf8, to allow project-local policies. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This is to hold what the project-local rule as to the charset/encoding for the commit log message is. Lack of it defaults to utf-8. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Yann Dirson 提交于
The change made in 8b7e5d76 to accomodate dense revlists in single-commit diffs has broken computing of diffs between arbitrary trees, which does need to consider two commit ids. This patch changes the two git-diff-tree calls to get the necessary two ids in this case. It does so by propagating a "singlecommit" flag through all functions involved via an additional argument. Signed-off-by: NYann Dirson <ydirson@altern.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
-
由 Josef Weidendorfer 提交于
-k requests to keep running on an error condition. Previously, git-mv stopped on failing renames even with -k. There are some error conditions which are not checked in the first phase of git-mv, eg. 'permission denied'. Still, option -k should work. Signed-off-by: NJosef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Josef Weidendorfer 提交于
The two synopsis lines have to be prefixed with a space so that asciidoc inserts a line break inbetween for the manual page. Signed-off-by: NJosef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Josef Weidendorfer 提交于
This gives a better error message when trying to move a directory into some subdirectory of itself; ie. no real bug fix: renaming already failed before, but with a strange "invalid argument". Signed-off-by: NJosef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Josef Weidendorfer 提交于
When doing multiple renames, and a rename in the middle fails, git-mv did not store the successful renames in the git index; this is fixed by delaying the error message on a failed rename to after the git updating. Signed-off-by: NJosef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Josef Weidendorfer 提交于
Small fixes to be consistent with other git scripts: - usage message is only about options and arguments - on error, exit(1) without the usage message Additionally, "beautifies" output with -n a little bit Signed-off-by: NJosef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 27 11月, 2005 5 次提交
-
-
由 Junio C Hamano 提交于
After figuring out the GIT_DIR location, make sure the repository is of the right vintage, by calling check_repository_format(). . Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This makes init-db repository version aware. It checks if an existing config file says the repository being reinitialized is of a wrong version and aborts before doing further harm. When copying the templates, it makes sure the they are of the right repository format version. Otherwise the templates are ignored with an warning message. It copies the templates before creating the HEAD, and if the config file is copied from the template directory, reads it, primarily to pick up the value of core.symrefsonly. It changes the way the result of the filemode reliability test is written to the configuration file using git_config_set(). The test is done even if the config file was copied from the templates. And finally, our own repository format version is written to the config file. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
After daemon, upload-pack and receive-pack find out where the git directory is and chdir() there, make sure that repository is in a format we understand, after putenv("GIT_DIR=.") so that it knows to pick up the configuration file from there. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This adds the repository format version code, first done by Martin Atukunda. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Prepending asterisk to the output was just adding noise, and making scripts like proposed git-send-mail by Andreas Ericsson do unnecessary work. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 26 11月, 2005 10 次提交
-
-
由 Junio C Hamano 提交于
It dropped the last hexdigit in the object name. [jc: Noticed and patch supplied by ALASCM, reworked to apply at the right place by me] Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Alexander Litvinov 提交于
Use update-index --stdin to handle large number of files without breaking exec() argument storage limit. [jc: with minor cleanup from the version posted on the list] Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Originally noticed by Tommi Virtanen, but done slightly differently. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Any core commands that use setup_git_directory() now check if given GIT_DIR is really a valid repository, so the same check in git-sh-setup can use it without reimplementing it in shell. This commit changes git-sh-setup to use git-var command for that, although any other commands would do. Note that we export GIT_DIR explicitly when calling git-var; without it, the caller of this script would use GIT_DIR that we return (which is to assume ./.git unless the caller has it elsewhere) while git-var would go up to find a .git directory in our parent directories, which would be checking a different directory from what our callers will be using. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
setup_git_directory() always trusted what the user told where GIT_DIR was, and assumed that is a valid .git/ directory. This commit changes it to at least do the same level validation as is_toplevel_directory() does -- has refs/, has objects/ unless GIT_OBJECT_DIRECTORY is set, and has valid HEAD symlink or symref. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Use setup_git_directory() so that it can find its .git directory. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Now all the users of this script detect its exit status and die, complaining that it is outside git repository. So move the code that dies from all callers to git-sh-setup script. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
There is no reason to use git-sh-setup from git-ls-remote. git-parse-remote can help the caller to use .git/remotes shortcut if it is run inside a git repository, but can still be useful outside a git repositoryas long as the caller does not use any shortcut. Use "git-rev-parse --git-dir" to figure out where the GIT_DIR is, instead of using git-sh-setup. This also makes "git-ls-remote origin" to work from inside a subdirectory of a git managed repository as a side effect. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
When you want to create a partial commit, giving -a by mistake would ignore the given path. Prevent it. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This is purely cosmetic, but avoid shadowing "FILE *config_file" global in git_config_set_multivar() function. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 25 11月, 2005 2 次提交
-
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Fix a warning: git.c:276: warning: value computed is not used Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Andreas Ericsson 提交于
Avoid this by passing "--norc" to cvsps. Signed-off-by: NAndreas Ericsson <ae@op5.se> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-