This changes the "die_on_error" boolean parameter to a mere "flags", and
changes the existing callers of hold_lock_file_for_update/append()
functions to pass LOCK_DIE_ON_ERROR.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

When core.prefersymlinkrefs is in use, detaching the HEAD by
checkout incorrectly clobbers the tip of the current branch.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The test to make sure that checkout fails when --track was asked for and
we cannot set up tracking information in t7201 was wrong, and it turns out
that the implementation for that feature itself was buggy.  This fixes it.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

This test creates files with several different umasks and expects their
permissions to be initialized according to the umask, so a default ACL on the
trash directory (which overrides the umask for files created in that directory)
causes the test to fail.  To avoid that, remove the default ACL if possible with
setfacl(1).
Signed-off-by: NMatt McCutchen <matt@mattmccutchen.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Plumbing tools should document what output can be expected.
Signed-off-by: NJonas Fonseca <fonseca@diku.dk>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

POSIX doth sayeth:

   "In the regular expression processing described in IEEE Std 1003.1-2001,
    the <newline> is regarded as an ordinary character and both a period and
    a non-matching list can match one. ... Those utilities (like grep) that
    do not allow <newline>s to match are responsible for eliminating any
    <newline> from strings before matching against the RE."

Thus far git has not been removing the trailing newline from strings matched
against regular expression patterns. This has the effect that (quoting
Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by
a newline) will be matched by the pattern '^(FUNCNAME.$)' but not
'^(FUNCNAME$)'", and more simply not '^FUNCNAME$'.
Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

Since the newline is not removed from lines before pattern matching, a
pattern cannot match to the end of the line using the '$' operator without
using an additional operator which will indirectly match the '\n' character.

Introduce a test which should pass, but which does not due to this flaw.
Signed-off-by: NBrandon Casey <drafnel@gmail.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

This test used the non-zero exit status of 'git diff' to indicate that a
negated funcname pattern, when placed last, was correctly rejected.

The problem with this is that 'git diff' always returns non-zero if it
finds differences in the files it is comparing, and the files must
contain differences in order to trigger the funcname pattern codepath.

Instead of checking for non-zero exit status, make sure the expected
error message is printed.
Signed-off-by: NBrandon Casey <drafnel@gmail.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

This test is supposed to disallow remote entries in the config file of the
form:

   [remote "/foobar"]
      ...

The leading slash in '/foobar' is not acceptable.

Instead it was incorrectly testing that the subkey had no leading '/', which
had no effect since the subkey pointer was made to point at a '.' in the
preceding lines.
Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil>
Acked-by: NDaniel Barkalow <barkalow@iabervon.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

b8eecafd introduced usage of
printf without a format string.
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

We carefully verify that the input to git-apply is sane,
including cross-checking that the filenames we see in "+++"
headers match what was provided on the command line of "diff
--git". When --directory is used, however, we ended up
comparing the unadorned name to one with the prepended root,
causing us to complain about a mismatch.

We simply need to prepend the root directory, if any, when
pulling the name out of the git header.
Signed-off-by: NJeff King <peff@peff.net>
Acked-by: NJunio C Hamano <gitster@pobox.com>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

In case there is no commit to apply (for example because you rebase to
upstream and all your local patches have been applied there), do not
fail.  The non-interactive rebase already behaves that way.

Do this by introducing a new command, "noop", which is substituted for
an empty commit list, so that deleting the commit list can still abort
as before.
Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

When executing a single test with colors enabled, the cursor was not set
back to the previous one, and you had to hit an extra enter to get it
back.

Work around this problem by calling 'tput sgr0' before printing the
final newline.
Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

Since v1.6.0.2~13^2~ the completion of a thin pack uses sha1write() for
its ability to compute a SHA1 on the written data.  This also provides
data buffering which, along with commit 92392b4a, will confuse pread()
whenever an appended object is 1) freed due to memory pressure because
of the depth-first delta processing, and 2) needed again because it has
many delta children, and 3) its data is still buffered by sha1write().

Let's fix the issue by simply forcing cached data out when such an
object is written so it can be pread()'d at leisure.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

* sg/maint-intrebase-msghook:
  rebase -i: remove leftover debugging
  rebase -i: proper prepare-commit-msg hook argument when squashing

This typo led to stack corruption for lines with whitespace fixes
and length > 1024.
Signed-off-by: NImre Deak <imre.deak@gmail.com>
Looks-good-by: NJunio C Hamano <gitster@pobox.com>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

The referenced commit tried to fix a flaw in stash's handling of a user
supplied invalid ref. i.e. 'git stash apply fake_ref@{0}' should fail
instead of applying stash@{0}. But, it did so in a naive way by avoiding the
use of the --default option of rev-parse, and instead manually supplied the
default revision if the user supplied an empty command line. This prevented
a common usage scenario of supplying flags on the stash command line (i.e.
non-empty command line) which would be parsed by lower level git commands,
without supplying a specific revision. This should fall back to the default
revision, but now it causes an error. e.g. 'git stash show -p'

The correct fix is to use the --verify option of rev-parse, which fails
properly if an invalid ref is supplied, and still allows falling back to a
default ref when one is not supplied.

Convert stash-drop to use --verify while we're at it, since specifying
multiple revisions for any of these commands is also an error and --verify
makes it so.
Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

* jk/maint-soliconv:
  Makefile: do not set NEEDS_LIBICONV for Solaris 8

Fix two memory allocation errors which allocate space for a pointer
rather than enough space for the structure itself.

This:

    struct commit_list *parent = xmalloc(sizeof(struct commit_list *));

should have been this:

    struct commit_list *parent = xmalloc(sizeof(struct commit_list));

But while we're at it, change the allocation to reference the
variable it is allocating memory for to try to prevent a similar
mistake, for example if the type is changed, in the future.
Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil>
Acked-by: NMiklos Vajna <vmiklos@frugalware.org>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

If we use pread() while at the end of the file, it will return 0, which is
not an error from the operating system point of view. In this case, errno
has not been set and must not be used.
Signed-off-by: NSamuel Tardieu <sam@rfc1149.net>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

If core.bare or core.sharedRepository are set in /etc/gitconfig or
~/.gitconfig, then 'git init' will read the values when constructing a
new config file; reading them, however, will override the values
specified on the command line.  In the case of --bare, this ends up
causing a segfault, without the repository being properly initialised;
in the case of --shared, the permissions are set according to the
existing config settings, not what was specified on the command line.

This fix saves any specified values for --bare and --shared prior to
reading existing config settings, and restores them after reading but
before writing the new config file.  core.bare is ignored in all
situations, while core.sharedRepository will only be used if --shared
is not specified to git init.

Also includes testcases which use a specified global config file
override, demonstrating the former failure scenario.
Signed-off-by: NDeskin Miller <deskinm@umich.edu>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

The --repo option was described in a way that the reader would have to
assume that it is the same as the <repository> parameter. But it actually
servers a purpose, which is now written down.

Furthermore, the --mirror option was missing from the synopsis.
Signed-off-by: NJohannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

Since "git rm" is supposed to be porcelain, we should convince it to
be user friendly by refreshing the index itself.
Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

The original git-rebase honored pre-rebase hook so that public branches
can be protected from getting rebased, but rebase --interactive ignored
the hook entirely.  This fixes it.
Signed-off-by: NNanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

Documentation/git-rebase.txt talks about pre-rebase hook, but it
appears that Documentation/git-hooks.txt does not have corresponding
entry for it.
Signed-off-by: NNanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

Signed-off-by: NDmitry Potapov <dpotapov@gmail.com>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

There are 9 places where prefix_path is called, and only in one of
them the returned pointer was checked to be non-zero and only to
call exit(128) as it is usually done by die(). In other 8 places,
the returned value was not checked and it caused SIGSEGV when a
path outside of the working tree was used. For instance, running
  git update-index --add /some/path/outside
caused SIGSEGV.

This patch changes prefix_path() to die if the path is outside of
the repository, so it never returns NULL.
Signed-off-by: NDmitry Potapov <dpotapov@gmail.com>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

When "git diff --no-index" is given an absolute pathname, it
would generate a diff header with the absolute path
prepended by the prefix, like:

  diff --git a/dev/null b/foo

Not only is this nonsensical, and not only does it violate
the description of diffs given in git-diff(1), but it would
produce broken binary diffs. Unlike text diffs, the binary
diffs don't contain the filenames anywhere else, and so "git
apply" relies on this header to figure out the filename.

This patch just refuses to use an invalid name for anything
visible in the diff.

Now, this fixes the "git diff --no-index --binary a
/dev/null" kind of case (and we'll end up using "a" as the
basename), but some other insane cases are impossible to
handle. If you do

	git diff --no-index --binary a /bin/echo

you'll still get a patch like

	diff --git a/a b/bin/echo
	old mode 100644
	new mode 100755
	index ...

and "git apply" will refuse to apply it for a couple of
reasons, and the diff is simply bogus.

And that, btw, is no longer a bug, I think. It's impossible
to know whethe the user meant for the patch to be a rename
or not. And as such, refusing to apply it because you don't
know what name you should use is probably _exactly_ the
right thing to do!

Original problem reported by Imre Deak. Test script and problem
description by Jeff King.
Signed-off-by: NJeff King <peff@peff.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

Fixes the `git clone --quiet` issue raised by Dave Jones in
http://marc.info/?l=git&m=121529226023180&w=2

With this simple patch applied we no longer see the following remote
messages as no-progress is correctly sent to the remote site:

  remote: Counting objects: 84102, done.
  remote: Compressing objects: 100% (24720/24720), done.
  remote: Total 84102 (delta 60949), reused 80810 (delta 57900)
Signed-off-by: NTuncer Ayaz <tuncer.ayaz@gmail.com>
Acked-by: NDaniel Barkalow <barkalow@iabervon.org>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

When performing copy detection, git-blame tries to
read gitlinks as blobs, which causes it to die.

This patch adds a check to skip them.
Signed-off-by: NAlexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

We don't provide complation for git-commands in dashed form anymore,
so there is no need to keep those cases.
Signed-off-by: NSZEDER Gábor <szeder@ira.uka.de>
Tested-by: NThomas Rast <trast@student.ethz.ch>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

This breaks my build on Solaris 8, as there is no separate
libiconv.

The history of this line is somewhat convoluted. In 2fd955cc
(in November 2005), NEEDS_LIBICONV was turned on for all
Solaris builds, claiming to "fix an error in Solaris 10 by
setting NEEDS_LIBICONV".

Later, e15f5451 (in February of 2006) claimed that "Solaris
9+ don't need iconv", and moved NEEDS_LIBICONV into a
section for Solaris 8.

Furthermore, Brandon Casey claims in

<5A1KxlhmUIHe8iXPxnXYuNXsq0Yjlbwkz2eBin3z7ELuL9nK-4tSpw@cipher.nrlssc.navy.mil>

that he does not set NEEDS_LIBICONV for Solaris 7.

So either one of those commits is totally wrong, or there is
some other magic going on where some Solaris installs need
it and others don't.

Given Brandon's statement and my problems on Solaris 8 with
NEEDS_LIBICONV, I am inclined to think the first commit was
bogus, and that NEEDS_LIBICONV shouldn't be set for Solaris
at all by default. If somebody wants to use iconv and has
installed it manually, they can set it in their config.mak.
Signed-off-by: NJeff King <peff@peff.net>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

Signed-off-by: NSZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

One would expect that the prepare-commit-msg hook gets 'squash' as the
second argument when squashing commits with 'rebase -i'.  However,
that was not the case, as it got 'merge' instead.  This patch fixes
the problem.
Signed-off-by: NSZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>

Note that those tests only check that there are no errors nor
warnings from Perl; they do not check for example if gitweb doesn't
use ARRAY(0x8e3cc20) instead of correct value in links, etc.
Signed-off-by: NJakub Narebski <jnareb@gmail.com>
Acked-by: NPetr Baudis <pasky@suse.cz>
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>