- 07 9月, 2008 3 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Unlike the case where the user does have a real change in the work tree, refusing to work because of unclean stat information is not very helpful. Signed-off-by: NJunio C Hamano <gitster@pobox.com> Acked-by: NNanako Shiraishi <nanako3@lavabit.com>
-
git://repo.or.cz/git-gui由 Junio C Hamano 提交于
* 'maint' of git://repo.or.cz/git-gui: git-gui: Fix diff parsing for lines starting with "--" or "++" git-gui: Fix string escaping in po2msg.sh git gui: show diffs with a minimum of 1 context line git-gui: update all remaining translations to French. git-gui: Update french translation
-
- 05 9月, 2008 3 次提交
-
-
由 Junio C Hamano 提交于
When somebody is reading git-blame.txt (or git-annotate.txt) for the first time, the message we would like to send is: (1) Here is why you would want to use this command, what it can do (perhaps more than what you would have expected from "$scm blame"), and how you tell it to do what it does. This is obvious. (2) You might have heard of the command with the other name. There is no difference between the two, except they differ in their default output formats. This is essential to answer: "git has both? how are they different?" (3) We tend to encourage blame over annotate for new scripts and new people, but there is no reason to choose one over the other. This is not as important as (2), but would be useful to avoid repeated questions about "when will we start deprecating this?" As long as we describe (2) on git-annotate page clearly enough, people who read git-blame page first and get curious can refer to git-annotate page. While at it, subtly hint (3) without being overly explicit. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
There is no reason to have a separate variable cmd_is_annotate; OUTPUT_ANNOTATE_COMPAT option is supposed to produce the compatibility output, and we should produce the same output even when the command was not invoked as "annotate" but as "blame -c". Noticed by Pasky. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Shawn O. Pearce 提交于
Languages like Lua and SQL use "--" to mark a line as commented out. If this appears at column 0 and is part of the pre-image we may see "--- foo" in the diff, indicating that the line whose content is "-- foo" has been removed from the new version. git-gui was incorrectly parsing "--- foo" as the old file name in the file header, causing it to generate a bad patch file when the user tried to stage or unstage a hunk or the selected line. We need to keep track of where we are in the parsing so that we do not misread a deletion or addition record as part of the header. Reported-by: NAlexander Gladysh <agladysh@gmail.com> Signed-off-by: NShawn O. Pearce <spearce@spearce.org>
-
- 04 9月, 2008 13 次提交
-
-
由 Junio C Hamano 提交于
The option used to be implemented as if it is a totally independent one, but "git diff --cumulative" would not mean anything without "--dirstat". This makes --cumulative imply --dirstat. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Petr Baudis 提交于
git <tab><tab> still shows way too many commands, some of them are clearly plumbing. This patch hides the plumbing commands liberally (that is, in special cases, users still might want to call one of the hidden commands, a *normal* workflow should never involve these, though - and if it does, we have a UI problem anyway). Signed-off-by: NPetr Baudis <pasky@suse.cz> Acked-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* nd/worktree: setup_git_directory(): fix move to worktree toplevel directory update-index: fix worktree setup read-tree: setup worktree if merge is required grep: fix worktree setup diff*: fix worktree setup
-
由 Junio C Hamano 提交于
* ho/dashless: tests: use "git xyzzy" form (t7200 - t9001) tests: use "git xyzzy" form (t7000 - t7199) tests: use "git xyzzy" form (t3600 - t6999) tests: use "git xyzzy" form (t0000 - t3599) 'git foo' program identifies itself without dash in die() messages Start conforming code to "git subcmd" style
-
由 Nanako Shiraishi 提交于
Converts tests between t7201-t9001. Signed-off-by: NNanako Shiraishi <nanako3@lavabit.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nanako Shiraishi 提交于
Converts tests between t7001-t7103. Signed-off-by: NNanako Shiraishi <nanako3@lavabit.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonas Fonseca 提交于
Signed-off-by: NJonas Fonseca <fonseca@diku.dk> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nicolas Pitre 提交于
Currently the code looks for line break characters in order to prepend "remote: " to every line received as many lines can be sent in a single chunk. However the opposite might happen too, i.e. a single message line split amongst multiple chunks. This patch adds support for the later case to avoid displays like: remote: Compressing objeremote: cts: 100% (313/313), done. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nanako Shiraishi 提交于
Converts tests between t3600-t6300. Signed-off-by: NNanako Shiraishi <nanako3@lavabit.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nanako Shiraishi 提交于
Converts tests between t0050-t3903. Signed-off-by: NNanako Shiraishi <nanako3@lavabit.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
The shell version of git checkout would print: Previous HEAD position was 1234abcd... commit subject line when leaving a detached HEAD for another commit. Ths C version attempted to implement this, but got the condition wrong such that the behavior never triggered. This patch simplifies the conditions for showing the message to the ones used by the shell version: any time we are leaving a detached HEAD and the new and old commits are not the same (this suppresses it for the "git checkout -b new" case recommended when you enter the detached state). Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Clemens Buchacher 提交于
'git clone <repo> path/' (note the trailing slash) fails, because the entire path is interpreted as leading directories. So when mkdir tries to create the actual path, it already exists. This makes sure trailing slashes are removed. Signed-off-by: NClemens Buchacher <drizzd@aon.at> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 03 9月, 2008 1 次提交
-
-
由 Miklos Vajna 提交于
When modifying merge-recursive.h, for example builtin-merge-recursive.c have to be recompiled which was not true till now, causing various runtime errors using an incremental build. Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 02 9月, 2008 7 次提交
-
-
由 Heikki Orsila 提交于
Signed-off-by: NHeikki Orsila <heikki.orsila@iki.fi> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Johan Herland 提交于
On a local clone, "git clone" would use the fully DWIMmed path as the origin URL in the resulting repo. This was slightly inconsistent with the case of a remote clone where the _given_ URL was used as the origin URL (because the DWIMming was done remotely, and was therefore not available to "git clone"). This behaviour caused problems when cloning a local non-bare repo with relative submodule URLs, because these submodule URLs would then be resolved against the DWIMmed URL (e.g. "/repo/.git") instead of the given URL (e.g. "/repo"). This patch teaches "git clone" to use the _given_ URL - instead of the DWIMmed path - as the origin URL. This causes relative submodule URLs to be resolved correctly, as long the _given_ URL indicates the correct directory against which the submodule URLs should be resolved. The patch also updates a testcase that contained the old-style origin URLs. Signed-off-by: NJohan Herland <johan@herland.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 SZEDER Gábor 提交于
There is no need to explicitly pass the file to be committed to 'git commit', because it's contents is already in the index. Signed-off-by: NSZEDER Gábor <szeder@ira.uka.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 SZEDER Gábor 提交于
Asciidoc removes lines starting with a dot when creating manpages. Since those lines were comments in use case examples showing shell commands, preceed those lines with a hash sign. Signed-off-by: NSZEDER Gábor <szeder@ira.uka.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 SZEDER Gábor 提交于
... to match the synopsis section Signed-off-by: NSZEDER Gábor <szeder@ira.uka.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Alexander Gavrilov 提交于
Escape '$', because otherwise git-gui crashes while trying to load malformed Japanese localization strings. Signed-off-by: NAlexander Gavrilov <angavrilov@gmail.com> Signed-off-by: NShawn O. Pearce <spearce@spearce.org>
-
由 Clemens Buchacher 提交于
Staging hunks without context does not work, because line number information would have to be recomputed for individual hunks. Since it is already possible to stage individual lines using 'Stage Line for Commit', zero context diffs are not really necessary for git gui. Signed-off-by: NClemens Buchacher <drizzd@aon.at> Signed-off-by: NShawn O. Pearce <spearce@spearce.org>
-
- 01 9月, 2008 3 次提交
-
-
由 Ask Bjørn Hansen 提交于
Signed-off-by: NAsk Bjørn Hansen <ask@develooper.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Gustaf Hendeby 提交于
The SYNOPSIS section of gitattibutes and gitmodule fail to clearly specify the name of the in tree files used. This patch brings in the initial `.' and the fact that the `.gitmodules' file should reside at the top-level of the working tree. Signed-off-by: NGustaf Hendeby <hendeby@isy.liu.se> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
This is a mechanical conversion of all '*.c' files with: s/((?:die|error|warning)\("git)-(\S+:)/$1 $2/; The result was manually inspected and no false positive was found. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 31 8月, 2008 7 次提交
-
-
由 Nguyễn Thái Ngọc Duy 提交于
When setup_git_directory() returns successfully, it is supposed to move current working directory to worktree toplevel directory. However, the code recomputing prefix inside setup_git_directory() has to move cwd back to original working directory, in order to get new prefix. After that, it should move cwd back to worktree toplevel directory as expected. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Teemu Likonen 提交于
gitcvs.usecrlfattr --> gitcvs.usecrlfattr:: This fixes an asciidoc markup issue. Signed-off-by: NTeemu Likonen <tlikonen@iki.fi> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
The description of crlf attribute incorrectly said that "-crlf" means binary. It is true that for binary files you would want "-crlf", but that is not the same thing. We also have supported attribute macros and via that mechanism a handy "binary" to specify "-crlf -diff" at the same time. It was not documented anywhere as far as I can tell, even though the support was there from the very beginning. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Heikki Orsila 提交于
User notifications are presented as 'git cmd', and code comments are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'. Signed-off-by: NHeikki Orsila <heikki.orsila@iki.fi> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Even after a handfle attempts, match_beginning logic still has corner cases: 1bf1a859 (apply: treat EOF as proper context., 2006-05-23) 65aadb92 (apply: force matching at the beginning., 2006-05-24) 4be60962 (apply --unidiff-zero: loosen sanity checks ..., 2006-09-17) ee5a317e (Fix "git apply" to correctly enforce "match ..., 2008-04-06) This is a tricky piece of code. We still incorrectly enforce "match_beginning" for -U0 matches. I noticed this while trying out an example sequence from Clemens Buchacher: $ echo a >victim $ git add victim $ echo b >>victim $ git diff -U0 >patch $ cat patch diff --git i/victim w/victim index 7898192..422c2b7 100644 --- i/victim +++ w/victim @@ -1,0 +2 @@ a +b $ git apply --cached --unidiff-zero <patch $ git show :victim b a The change inserts a new line before the second line, but we insist it to be applied at the beginning. As the result, the code refuses to apply it at the original offset, and we end up adding the line at the beginning. Updates to the test script are by Clemens Buchacher. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Since 59d3f541 (name-rev: avoid "^0" when unneeded, 2007-02-20), name-rev stopped showing an unnecessary "^0" to dereference a tag down to a commit. The patch should have made a matching update to the documentation, but we forgot. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 30 8月, 2008 3 次提交
-
-
由 Junio C Hamano 提交于
* sp/missing-thin-base: pack-objects: Allow missing base objects when creating thin packs
-
由 Junio C Hamano 提交于
* af/maint-install-no-handlink: Fix use of hardlinks in "make install" Makefile: always provide a fallback when hardlinks fail
-
由 Junio C Hamano 提交于
Playing with linker games to shrink git-shell did not go well with various other platforms and compilers. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-