- 16 8月, 2008 4 次提交
-
-
由 Stephan Beyer 提交于
"git stash -h" showed some incomplete and ugly usage information. For example, the useful "--keep-index" option for "save" or the "--index" option for "apply" were not shown. Also in the documentation synopsis they were not shown, so that there is no incentive to scroll down and even see that such options exist. This patch improves the git-stash synopsis in the documentation by mentioning that further options to the stash commands and then copies this synopsis to the usage information string of git-stash.sh. For the latter, the dashless git command string has to be inserted on the second and the following usage lines. The code of this is taken from git-sh-setup so that all lines will show the command string. Note that the "create" command is not advertised at all now, because it was not mentioned in git-stash.txt. Signed-off-by: NStephan Beyer <s-beyer@gmx.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Eric Blake 提交于
On platforms with $X, make removes any leftover scripts 'a' from earlier builds if a new binary 'a.exe' is now built. However, on cygwin 1.7.0, 'git' and 'git.exe' now consistently name the same file. Test for file equality before attempting a remove, in order to avoid nuking just-built binaries. Signed-off-by: NEric Blake <ebb9@byu.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Stephan Beyer 提交于
The git-apply documentation says that --binary is a historical option. This patch lets git-am ignore --binary and removes advertisements of this option. Signed-off-by: NStephan Beyer <s-beyer@gmx.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Marcus Griep 提交于
Git allows access to the gitattributes man page via `git help attributes`, but this is not discoverable via the bash-completion mechanism. This patch adds all current non-command man pages to the completion candidate list. Signed-off-by: NMarcus Griep <marcus@griep.us> Acked-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 15 8月, 2008 5 次提交
-
-
由 Alex Riesen 提交于
Use square brackets instead. And the prominent example of the deficiency are, as usual, the filesystems of Microsoft house. Signed-off-by: NAlex Riesen <raa.lkml@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Lee Marlow 提交于
Signed-off-by: NLee Marlow <lee.marlow@gmail.com> Acked-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Lee Marlow 提交于
The --tool= long option to "git mergetool" can be completed with: kdiff3 tkdiff meld xxdiff emerge vimdiff gvimdiff ecmerge opendiff Signed-off-by: NLee Marlow <lee.marlow@gmail.com> Acked-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Matt McCutchen 提交于
Signed-off-by: NMatt McCutchen <matt@mattmccutchen.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Eric Raible 提交于
Bring completion up to date with the man page. Signed-off-by: NEric Raible <raible@gmail.com> Acked-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 14 8月, 2008 6 次提交
-
-
由 Junio C Hamano 提交于
* maint: t5304-prune: adjust file mtime based on system time rather than file mtime Fix escaping of glob special characters in pathspecs
-
由 Brandon Casey 提交于
test-chmtime can adjust the mtime of a file based on the file's mtime, or based on the system time. For files accessed over NFS, the file's mtime is set by the NFS server, and as such may vary a great deal from the NFS client's system time if the clocks of the client and server are out of sync. Since these tests are testing the expire feature of git-prune, an incorrect mtime could cause a file to be expired or not expired incorrectly and produce a test failure. Avoid this NFS pitfall by modifying the calls to test-chmtime so that the mtime is adjusted based on the system time, rather than the file's mtime. Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
OPT_CALLBACK() is passed &integer which is now an "int" rather than "unsigned long". Update the length_callback function. Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Kevin Ballard 提交于
match_one implements an optimized pathspec match where it only uses fnmatch if it detects glob special characters in the pattern. Unfortunately it didn't treat \ as a special character, so attempts to escape a glob special character would fail even though fnmatch() supports it. Signed-off-by: NKevin Ballard <kevin@sb.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Rast 提交于
The existing parent rewriting did not handle the case where a previous commit was amended (via edit or squash). Fix by always putting the new sha1 of the last commit into the $REWRITTEN map. Signed-off-by: NThomas Rast <trast@student.ethz.ch>
-
由 Thomas Rast 提交于
'git rebase -i -p' forgot to update the index and working directory during fast forwards. Fix this. Makes 'GIT_EDITOR=true rebase -i -p <ancestor>' a no-op again. Also, it attempted to do a fast forward even if it was instructed not to commit (via -n). Fall back to the cherry-pick code path and let that handle the issue for us. Signed-off-by: NThomas Rast <trast@student.ethz.ch>
-
- 13 8月, 2008 11 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint: Do not talk about "diff" in rev-list documentation.
-
由 Junio C Hamano 提交于
Since 8c02eee2 (git-rev-list(1): group options; reformat; document more options, 2006-09-01), git-rev-list documentation talks as if it supports any kind of diff output. It doesn't. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
git://git.bogomips.org/git-svn由 Junio C Hamano 提交于
* git://git.bogomips.org/git-svn: git-svn: Reduce temp file usage when dealing with non-links git-svn: Make it incrementally faster by minimizing temp files Git.pm: Add faculties to allow temp files to be cached
-
由 Marcus Griep 提交于
Currently, in sub 'close_file', git-svn creates a temporary file and copies the contents of the blob to be written into it. This is useful for symlinks because svn stores symlinks in the form: link $FILE_PATH Git creates a blob only out of '$FILE_PATH' and uses file mode to indicate that the blob should be interpreted as a symlink. As git-hash-object is invoked with --stdin-paths, a duplicate of the link from svn must be created that leaves off the first five bytes, i.e. 'link '. However, this is wholly unnecessary for normal blobs, though, as we already have a temp file with their contents. Copying the entire file gains nothing, and effectively requires a file to be written twice before making it into the object db. This patch corrects that issue, holding onto the substr-like duplication for symlinks, but skipping it altogether for normal blobs by reusing the existing temp file. Signed-off-by: NMarcus Griep <marcus@griep.us> Acked-by: NEric Wong <normalperson@yhbt.net>
-
由 Marcus Griep 提交于
Currently, git-svn would create a temp file on four occasions: 1. Reading a blob out of the object db 2. Creating a delta from svn 3. Hashing and writing a blob into the object db 4. Reading a blob out of the object db (in another place in code) Any time git-svn did the above, it would dutifully create and then delete said temp file. Unfortunately, this means that between 2-4 temporary files are created/deleted per file 'add/modify'-ed in svn (O(n)). This causes significant overhead and helps the inode counter to spin beautifully. By its nature, git-svn is a serial beast. Thus, reusing a temp file does not pose significant problems. "truncate and seek" takes much less time than "unlink and create". This patch centralizes the tempfile creation and holds onto the tempfile until they are deleted on exit. This significantly reduces file overhead, now requiring at most three (3) temp files per run (O(1)). Signed-off-by: NMarcus Griep <marcus@griep.us> Acked-by: NEric Wong <normalperson@yhbt.net>
-
由 Marcus Griep 提交于
This patch offers a generic interface to allow temp files to be cached while using an instance of the 'Git' package. If many temp files are created and destroyed during the execution of a program, this caching mechanism can help reduce the amount of files created and destroyed by the filesystem. The temp_acquire method provides a weak guarantee that a temp file will not be stolen by subsequent requests. If a file is locked when another acquire request is made, a simple error is thrown. Signed-off-by: NMarcus Griep <marcus@griep.us> Acked-by: NEric Wong <normalperson@yhbt.net>
-
由 Thomas Rast 提交于
This completely rewrites the documentation of --full-history with lots of examples. Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Gustaf Hendeby 提交于
All BibTeX entries starts with an @ followed by an entry type. Since there are many entry types and own can be defined, the pattern matches legal entry type names instead of just the default types (which would be a long list). The pattern also matches strings and comments since they will also be useful to position oneself in a bib-file. Signed-off-by: NGustaf Hendeby <hendeby@isy.liu.se> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Gustaf Hendeby 提交于
Since the hunk header pattern text was written patterns for Ruby and Pascal/Delphi have been added. For users to be able to find them they should be documented not only in code. Signed-off-by: NGustaf Hendeby <hendeby@isy.liu.se> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Stephen R. van den Berg 提交于
Fixes the bug on (amongst others) Solaris that only the first child ever is reaped. Signed-off-by: NStephen R. van den Berg <srb@cuci.nl> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 12 8月, 2008 8 次提交
-
-
由 Junio C Hamano 提交于
Recently "git diff --check" learned to detect new trailing blank lines just like "git apply --whitespace" does. However this check should not trigger unconditionally. This patch makes it honor the whitespace settings from core.whitespace and gitattributes. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint: git-bisect: fix wrong usage of read(1)
-
由 Thomas Rast 提交于
Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Petr Baudis 提交于
The post-update hook, which is required to be enabled in order for the repository to be accessible over HTTP, is not enabled by chmod a+x anymore, but instead by dropping the .sample suffix. This patch emphasizes this change in the release notes (since I believe this is rather noticeable backwards-incompatible change). It also adjusts the documentation which still described the old way and fixes t/t5540-http-push.sh, which was broken for 1.5 month but apparently noone ever runs this test. Signed-off-by: NPetr Baudis <pasky@suse.cz> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Francis Moreau 提交于
Signed-off-by: NFrancis Moreau <francis.moro@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint: Re-fix rev-list-options documentation
-
由 Junio C Hamano 提交于
18a2197e (Documentation: rev-list-options: Fix -g paragraph formatting, 2008-08-10) introduced the third paragraph that is continued, but it seems to confuse docbook toolchain on FC9 machines. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 11 8月, 2008 5 次提交
-
-
由 Junio C Hamano 提交于
* maint: Documentation: fix invalid reference to 'mybranch' in user manual Fix deleting reflog entries from HEAD reflog reflog test: add more tests for 'reflog delete' Documentation: rev-list-options: Fix -g paragraph formatting Conflicts: Documentation/user-manual.txt
-
由 Ivan Stankovic 提交于
Signed-off-by: NIvan Stankovic <pokemon@fly.srk.fer.hr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
dwim_ref() used to resolve HEAD symbolic ref to its target (i.e. current branch). This incorrectly removed the reflog entry from the current branch when 'git reflog delete HEAD@{1}' was asked for. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Pieter de Bie 提交于
This adds more tests for 'reflog delete' and marks it as broken, as currently a call to 'git reflog delete HEAD@{1}' deletes entries in the currently checked out branch's log, not the HEAD log. Noticed by John Wiegley Signed-off-by: NPieter de Bie <pdebie@ai.rug.nl> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Rast 提交于
- Add an escape to @{now}. Without the escape, the brace does something magic and eats half the sentence up to the closing brace at 'timestamp}'. - Join the last paragraph with a '+'. Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 10 8月, 2008 1 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-