- 21 8月, 2011 1 次提交
-
-
由 Fredrik Kuivinen 提交于
Benchmarks for the hot cache case: before: $ perf stat --repeat=5 git grep qwerty > /dev/null Performance counter stats for 'git grep qwerty' (5 runs): 3,478,085 cache-misses # 2.322 M/sec ( +- 2.690% ) 11,356,177 cache-references # 7.582 M/sec ( +- 2.598% ) 3,872,184 branch-misses # 0.363 % ( +- 0.258% ) 1,067,367,848 branches # 712.673 M/sec ( +- 2.622% ) 3,828,370,782 instructions # 0.947 IPC ( +- 0.033% ) 4,043,832,831 cycles # 2700.037 M/sec ( +- 0.167% ) 8,518 page-faults # 0.006 M/sec ( +- 3.648% ) 847 CPU-migrations # 0.001 M/sec ( +- 3.262% ) 6,546 context-switches # 0.004 M/sec ( +- 2.292% ) 1497.695495 task-clock-msecs # 3.303 CPUs ( +- 2.550% ) 0.453394396 seconds time elapsed ( +- 0.912% ) after: $ perf stat --repeat=5 git grep qwerty > /dev/null Performance counter stats for 'git grep qwerty' (5 runs): 2,989,918 cache-misses # 3.166 M/sec ( +- 5.013% ) 10,986,041 cache-references # 11.633 M/sec ( +- 4.899% ) (scaled from 95.06%) 3,511,993 branch-misses # 1.422 % ( +- 0.785% ) 246,893,561 branches # 261.433 M/sec ( +- 3.967% ) 1,392,727,757 instructions # 0.564 IPC ( +- 0.040% ) 2,468,142,397 cycles # 2613.494 M/sec ( +- 0.110% ) 7,747 page-faults # 0.008 M/sec ( +- 3.995% ) 897 CPU-migrations # 0.001 M/sec ( +- 2.383% ) 6,535 context-switches # 0.007 M/sec ( +- 1.993% ) 944.384228 task-clock-msecs # 3.177 CPUs ( +- 0.268% ) 0.297257643 seconds time elapsed ( +- 0.450% ) So we gain about 35% by using the kwset code. As a side effect of using kwset two grep tests are fixed by this patch. The first is fixed because kwset can deal with case-insensitive search containing NULs, something strcasestr cannot do. The second one is fixed because we consider patterns containing NULs as fixed strings (regcomp cannot accept patterns with NULs). Signed-off-by: NFredrik Kuivinen <frekui@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 02 8月, 2011 1 次提交
-
-
由 René Scharfe 提交于
Add a new option, -W, to show the whole surrounding function of a match. It uses the same regular expressions as -p and diff to find the beginning of sections. Currently it will not display comments in front of a function, but those that are following one. Despite this shortcoming it is already useful, e.g. to simply see a more complete applicable context or to extract whole functions. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 06 6月, 2011 3 次提交
-
-
由 René Scharfe 提交于
With --heading, the filename is printed once before matches from that file instead of at the start of each line, giving more screen space to the actual search results. This option is taken from ack (http://betterthangrep.com/). And now git grep can dress up like it: $ git config alias.ack "grep --break --heading --line-number" $ git ack -e --heading Documentation/git-grep.txt 154:--heading:: t/t7810-grep.sh 785:test_expect_success 'grep --heading' ' 786: git grep --heading -e char -e lo_w hello.c hello_world >actual && 808: git grep --break --heading -n --color \ Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
With --break, an empty line is printed between matches from different files, increasing readability. This option is taken from ack (http://betterthangrep.com/). Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
Commit 431d6e7b (grep: enable threading for context line printing) split the printing of the "--\n" mark between results from different files out into two places: show_line() in grep.c for the non-threaded case and work_done() in builtin/grep.c for the threaded case. Commit 55f638bd (grep: Colorize filename, line number, and separator) updated the former, but not the latter, so the separators between files are not colored if threads are used. This patch merges the two. In the threaded case, hunk marks are now printed by show_line() for every file, including the first one, and the very first mark is simply skipped in work_done(). This ensures that the output is properly colored and works just as well. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 10 5月, 2011 3 次提交
-
-
由 Michał Kiedrowicz 提交于
This patch teaches git-grep the --perl-regexp/-P options (naming borrowed from GNU grep) in order to allow specifying PCRE regexes on the command line. PCRE has a number of features which make them more handy to use than POSIX regexes, like consistent escaping rules, extended character classes, ungreedy matching etc. git isn't build with PCRE support automatically. USE_LIBPCRE environment variable must be enabled (like `make USE_LIBPCRE=YesPlease`). Signed-off-by: NMichał Kiedrowicz <michal.kiedrowicz@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michał Kiedrowicz 提交于
This simplifies compile_regexp() a little and allows re-using error handling code. Signed-off-by: NMichał Kiedrowicz <michal.kiedrowicz@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michał Kiedrowicz 提交于
Signed-off-by: NMichał Kiedrowicz <michal.kiedrowicz@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 05 5月, 2011 1 次提交
-
-
由 Michał Kiedrowicz 提交于
Both match_one_pattern() and look_ahead() use fixmatch() and regmatch() in the same way. They really want to match a pattern againt a string, but now they need to know if the pattern is fixed or regexp. This change cleans this up by introducing patmatch() (from "pattern match") and also simplifies inserting other ways of matching a string. Signed-off-by: NMichał Kiedrowicz <michal.kiedrowicz@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 13 9月, 2010 2 次提交
-
-
由 Junio C Hamano 提交于
In the olden days, log --author=me --committer=him --grep=this --grep=that used to be turned into: (OR (HEADER-AUTHOR me) (HEADER-COMMITTER him) (PATTERN this) (PATTERN that)) showing my patches that do not have any "this" nor "that", which was totally useless. 80235ba7 ("log --author=me --grep=it" should find intersection, not union, 2010-01-17) improved it greatly to turn the same into: (ALL-MATCH (HEADER-AUTHOR me) (HEADER-COMMITTER him) (OR (PATTERN this) (PATTERN that))) That is, "show only patches by me and committed by him, that have either this or that", which is a lot more natural thing to ask. We however need to be a bit more clever when the user asks more than one "author" (or "committer"); because a commit has only one author (and one committer), they ought to be interpreted as asking for union to be useful. The current implementation simply added another author/committer pattern at the same top-level for ALL-MATCH to insist on matching all, finding nothing. Turn log --author=me --author=her \ --committer=him --committer=you \ --grep=this --grep=that into (ALL-MATCH (OR (HEADER-AUTHOR me) (HEADER-AUTHOR her)) (OR (HEADER-COMMITTER him) (HEADER-COMMITTER you)) (OR (PATTERN this) (PATTERN that))) instead. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
The callers should be queuing only GREP_PATTERN_HEAD elements to the header_list queue; simplify the switch and guard it with an assert. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 25 5月, 2010 7 次提交
-
-
由 René Scharfe 提交于
Search patterns in a file specified with -f can contain NUL characters. The current code ignores all characters on a line after a NUL. Pass the actual length of the line all the way from the pattern file to fixmatch() and use it for case-sensitive fixed string matching. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
Refactor REG_STARTEND handling inlook_ahead() into a new helper, regmatch(), and use it for line matching, too. This allows regex matching beyond NUL characters if regexec() supports the flag. NUL characters themselves are not matched in any way, though. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
Functions for C strings, like strcasestr(), can't see beyond NUL characters. Check if there is such an obstacle on the line and try again behind it. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
Allow searching beyond NUL characters by using memmem() instead of strstr(). Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
As with the option -c/--count, git grep with the option -l/--name-only should work the same with binary files as with text files because there is no danger of messing up the terminal with control characters from the contents of matching files. GNU grep does the same. Move the check for ->name_only before the one for binary_match_only, thus making the latter irrelevant for git grep -l. Reported-by: NDmitry Potapov <dpotapov@gmail.com> Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
The intent of showing the message "Binary file xyz matches" for binary files is to avoid annoying users by potentially messing up their terminals by printing control characters. In --count mode, this precaution isn't necessary. Display counts of matches if -c/--count was specified, even if -a was not given. GNU grep does the same. Moving the check for ->count before the code for handling binary file also avoids printing context lines if --count and -[ABC] were used together, so we can remove the part of the comment that mentions this behaviour. Again, GNU grep does the same. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
Turn the switch inside-out and add labels for each possible value of ->binary. This makes the code easier to read and avoids calling buffer_is_binary() if the option -a was given. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 16 3月, 2010 1 次提交
-
-
由 René Scharfe 提交于
If context lines are to be printed, grep separates them with hunk marks ("--\n"). These marks are printed between matches from different files, too. They are not printed before the first file, though. Threading was disabled when context line printing was enabled because avoiding to print the mark before the first line was an unsolved synchronisation problem. This patch separates the code for printing hunk marks for the threaded and the unthreaded case, allowing threading to be turned on together with the common -ABC options. ->show_hunk_mark, which controls printing of hunk marks between files in show_line(), is now set in grep_buffer_1(), but only if some results have already been printed and threading is disabled. The threaded case is handled in work_done(). Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 08 3月, 2010 2 次提交
-
-
由 Mark Lodato 提交于
Colorize non-matching text of selected lines, context lines, and function name lines. The default for all three is no color, but they can be configured using color.grep.<slot>. The first two are similar to the corresponding options in GNU grep, except that GNU grep applies the color to the entire line, not just non-matching text. Signed-off-by: NMark Lodato <lodatom@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Mark Lodato 提交于
Colorize the filename, line number, and separator in git grep output, as GNU grep does. The colors are customizable through color.grep.<slot>. The default is to only color the separator (in cyan), since this gives the biggest legibility increase without overwhelming the user with colors. GNU grep also defaults cyan for the separator, but defaults to magenta for the filename and to green for the line number, as well. There is one difference from GNU grep: When a binary file matches without -a, GNU grep does not color the <file> in "Binary file <file> matches", but we do. Like GNU grep, if --null is given, the null separators are not colored. For config.txt, use a a sub-list to describe the slots, rather than a single paragraph with parentheses, since this is much more readable. Remove the cast to int for `rm_eo - rm_so` since it is not necessary. Signed-off-by: NMark Lodato <lodatom@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 04 2月, 2010 1 次提交
-
-
由 René Scharfe 提交于
After 885d211e, the value of the ->fixed pattern option only depends on the grep option of the same name. Regex flags don't matter any more, because fixed mode and regex mode are strictly separated. Thus we can simply copy the value from struct grep_opt to struct grep_pat, as we do already for ->word_regexp and ->ignore_case. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 27 1月, 2010 2 次提交
-
-
由 Benjamin Kramer 提交于
BSD and glibc have an extension to regexec which takes a buffer + length pair instead of a NUL-terminated string. Since we already have the length computed this can save us a strlen call inside regexec. Signed-off-by: NBenjamin Kramer <benny.kra@googlemail.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Fredrik Kuivinen 提交于
Make git grep use threads when it is available. The results below are best of five runs in the Linux repository (on a box with two cores). With the patch: git grep qwerty 1.58user 0.55system 0:01.16elapsed 183%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+800outputs (0major+5774minor)pagefaults 0swaps Without: git grep qwerty 1.59user 0.43system 0:02.02elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+800outputs (0major+3716minor)pagefaults 0swaps And with a pattern with quite a few matches: With the patch: $ /usr/bin/time git grep void 5.61user 0.56system 0:03.44elapsed 179%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+800outputs (0major+5587minor)pagefaults 0swaps Without: $ /usr/bin/time git grep void 5.36user 0.51system 0:05.87elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+800outputs (0major+3693minor)pagefaults 0swaps In either case we gain about 40% by the threading. Signed-off-by: NFredrik Kuivinen <frekui@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 26 1月, 2010 1 次提交
-
-
由 Junio C Hamano 提交于
Historically, any grep filter in "git log" family of commands were taken as restricting to commits with any of the words in the commit log message. However, the user almost always want to find commits "done by this person on that topic". With "--all-match" option, a series of grep patterns can be turned into a requirement that all of them must produce a match, but that makes it impossible to ask for "done by me, on either this or that" with: log --author=me --committer=him --grep=this --grep=that because it will require both "this" and "that" to appear. Change the "header" parser of grep library to treat the headers specially, and parse it as: (all-match-OR (HEADER-AUTHOR me) (HEADER-COMMITTER him) (OR (PATTERN this) (PATTERN that) ) ) Even though the "log" command line parser doesn't give direct access to the extended grep syntax to group terms with parentheses, this change will cover the majority of the case the users would want. This incidentally revealed that one test in t7002 was bogus. It ran: log --author=Thor --grep=Thu --format='%s' and expected (wrongly) "Thu" to match "Thursday" in the author/committer date, but that would never match, as the timestamp in raw commit buffer does not have the name of the day-of-the-week. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 13 1月, 2010 1 次提交
-
-
由 Junio C Hamano 提交于
Even when running without the -F (--fixed-strings) option, we checked the pattern and used fixmatch() codepath when it does not contain any regex magic. Finding fixed strings with strstr() surely must be faster than running the regular expression crud. Not so. It turns out that on some libc implementations, using the regcomp()/regexec() pair is a lot faster than running strstr() and strcasestr() the fixmatch() codepath uses. Drop the optimization and use the fixmatch() codepath only when the user explicitly asked for it with the -F option. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 12 1月, 2010 1 次提交
-
-
由 Junio C Hamano 提交于
The internal "grep" engine we use checks for hits line-by-line, instead of letting the underlying regexec()/fixmatch() routines scan for the first match from the rest of the buffer. This was a major source of overhead compared to the external grep. Introduce a "look-ahead" mechanism to find the next line that would potentially match by using regexec()/fixmatch() in the remainder of the text to skip unmatching lines, and use it when the query criteria is simple enough (i.e. punt for an advanced grep boolean expression like "lines that have both X and Y but not Z" for now) and we are not running under "-v" (aka "--invert-match") option. Note that "-L" (aka "--files-without-match") is not a reason to disable this optimization. Under the option, we are interested if the file has any hit at all, and that is what we determine reliably with or without the optimization. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 17 11月, 2009 1 次提交
-
-
由 Brian Collins 提交于
"git grep" currently an error when you combine the -F and -i flags. This isn't in line with how GNU grep handles it. This patch allows the simultaneous use of those flags. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NBrian Collins <bricollins@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 03 7月, 2009 1 次提交
-
-
由 René Scharfe 提交于
It was found a bit too loud to show == separators between the function headers. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 02 7月, 2009 5 次提交
-
-
由 René Scharfe 提交于
Respect the userdiff attributes and config settings when looking for lines with function definitions in git grep -p. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
The new option -p instructs git grep to print the previous function definition as a context line, similar to diff -p. Such context lines are marked with an equal sign instead of a dash. This option complements the existing context options -A, -B, -C. Function definitions are detected using the same heuristic that diff uses. User defined regular expressions are not supported, yet. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
Factor out pre context line handling into the new function show_pre_context() and change the algorithm to rewind by looking for newline characters and roll forward again, instead of maintaining an array of line beginnings and ends. This is slower for hits, but the cost for non-matching lines becomes zero. Normally, there are far more non-matching lines, so the time spent in total decreases. Before this patch (current Linux kernel repo, best of five runs): $ time git grep --no-ext-grep -B1 memset >/dev/null real 0m2.134s user 0m1.932s sys 0m0.196s $ time git grep --no-ext-grep -B1000 memset >/dev/null real 0m12.059s user 0m11.837s sys 0m0.224s The same with this patch: $ time git grep --no-ext-grep -B1 memset >/dev/null real 0m2.117s user 0m1.892s sys 0m0.228s $ time git grep --no-ext-grep -B1000 memset >/dev/null real 0m2.986s user 0m2.696s sys 0m0.288s Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
Print a hunk mark before matches from a new file are shown, in addition to the current behaviour of printing them if lines have been skipped. The result is easier to read, as (presumably unrelated) matches from different files are separated by a hunk mark. GNU grep does the same. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
Move last_shown into struct grep_opt, to make it available in show_line(), and then make the function handle the printing of hunk marks for context lines in a central place. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 04 6月, 2009 1 次提交
-
-
由 René Scharfe 提交于
The command "git grep -w ''" dies as soon as it encounters an empty line, reporting (wrongly) that "regexp returned nonsense". The first hunk of this patch relaxes the sanity check that is responsible for that, allowing matches to start at the end. The second hunk complements it by making sure that empty matches are rejected if -w was specified, as they are not really words. GNU grep does the same: $ echo foo | grep -c '' 1 $ echo foo | grep -c -w '' 0 Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 02 6月, 2009 1 次提交
-
-
由 René Scharfe 提交于
If a zero-length match is encountered, break out of loop and show the rest of the line uncoloured. Otherwise we'd be looping forever, trying to make progress by advancing the pointer by zero characters. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 24 5月, 2009 1 次提交
-
-
由 René Scharfe 提交于
After bol is forwarded, it doesn't represent the beginning of the line any more. This means that the beginning-of-line marker (^) mustn't match, i.e. the regex flag REG_NOTBOL needs to be set. This bug was introduced by fb62eb7f ("grep -w: forward to next possible position after rejected match"). Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 21 5月, 2009 1 次提交
-
-
由 René Scharfe 提交于
As noticed by Dmitry Gryazin: When a pattern is found but it doesn't start and end at word boundaries, bol is forwarded to after the match and the pattern is searched again. When a pattern is finally found between word boundaries, the match offsets are off by the number of characters that have been skipped. This patch corrects the offsets to be relative to the value of bol as passed to match_one_pattern() by its caller. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 28 4月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 19 3月, 2009 1 次提交
-
-
由 Michele Ballabio 提交于
Avoid a segfault when the command git log --all-match was issued, by ignoring the option. Signed-off-by: NMichele Ballabio <barra_cuda@katamail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-