We have a number of badly checked write() calls.  Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes.  Switch to using
the new write_in_full().  Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().

Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

We have a number of badly checked read() calls.  Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads.  Add a read_in_full()
providing those semantics.  Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

We recently introduced a write_in_full() which would either write
the specified object or emit an error message and fail.  In order
to fix the read side we now want to introduce a read_in_full()
but without an error emit.  This patch cleans up the naming
of this family of calls:

1) convert the existing write_or_whine() to write_or_whine_pipe()
   to better indicate its pipe specific nature,
2) convert the existing write_in_full() calls to write_or_whine()
   to better indicate its nature,
3) introduce a write_in_full() providing a write or fail semantic,
   and
4) convert write_or_whine() and write_or_whine_pipe() to use
   write_in_full().
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

There is no reason not to, really.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Since we are talking about allowing potentially incompatible UI
changes in v1.5.0 iff the change improves the general situation,
I would say why not.

There is --no-utf8 flag to avoid re-coding from botching the log
message just in case, but we may not even need it.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: NMichael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Prevent a client from overrunning the on stack ref buffer.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

It is bad manners to leave these sizable files
around when we are done with them.
Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

This makes the earlier "wait for 10 minutes before importing" safety
overridable with "-a(ll)" flag, and adds necessary documentation.
Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Some users apparently create local heads with the same basename
as the remote branch they're tracking.
Signed-off-by: NEric Wong <normalperson@yhbt.net>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Also, document --{trunk,branches,tags} options while we're
documenting multi-init options.
Signed-off-by: NEric Wong <normalperson@yhbt.net>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Clarify definition of "reachable" (what chain?)
Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

This fixes newly introduced bug when the incremental cycle edge revisions
are imported twice.
Signed-off-by: NSasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

With this patch, cvsimport will skip commits made
in the last 10 minutes. The recent-ness test is of
5 minutes + cvsps fuzz window (5 minutes default).

When working with a CVS repository that is in use,
importing commits that are too recent can lead to
partially incorrect trees. This is mainly due to

 - Commits that are within the cvsps fuzz window may later
   be found to have affected more files.

 - When performing incremental imports, clock drift between
   the systems may lead to skipped commits.

This commit helps keep incremental imports of in-use
CVS repositories sane.
Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Remove superfluous trailing "|" separator from difftree part of "commit"
view for new files (created in given commit).
Signed-off-by: NJakub Narebski <jnareb@gmail.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Since git-reset has learned restoring the absence of paths git-rm --cached is
no longer necessary. Therefore remove it from the cached content header hint.

Also remove the unfortunate wording 'Cached' from the header itself.
Signed-off-by: NJürgen Rühle <j-r@online.de>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Make "init" the equivalent of "init-db". This should make first GIT
impression a little more friendly.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

* sp/mmap: (27 commits)
  Spell default packedgitlimit slightly differently
  Increase packedGit{Limit,WindowSize} on 64 bit systems.
  Update packedGit config option documentation.
  mmap: set FD_CLOEXEC for file descriptors we keep open for mmap()
  pack-objects: fix use of use_pack().
  Fix random segfaults in pack-objects.
  Cleanup read_cache_from error handling.
  Replace mmap with xmmap, better handling MAP_FAILED.
  Release pack windows before reporting out of memory.
  Default core.packdGitWindowSize to 1 MiB if NO_MMAP.
  Test suite for sliding window mmap implementation.
  Create pack_report() as a debugging aid.
  Support unmapping windows on 'temporary' packfiles.
  Improve error message when packfile mmap fails.
  Ensure core.packedGitWindowSize cannot be less than 2 pages.
  Load core configuration in git-verify-pack.
  Fully activate the sliding window pack access.
  Unmap individual windows rather than entire files.
  Document why header parsing won't exceed a window.
  Loop over pack_windows when inflating/accessing data.
  ...

Conflicts:

	cache.h
	pack-check.c

This is shorter and easier to read, and also makes sure the
constant expression does not overflow integer range.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

* jr/status:
  Improve cached content header of status output
  Support --amend on initial commit in status output
  Improve "nothing to commit" part of status output
  Clarify syntax and role of git-add in status output

* jc/remote:
  git-remote

When <path> exists in the index (either merged or unmerged), and
<tree> does not have it, git-reset should be usable to restore
the absense of it from the tree.  This implements it.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

This updates the way diffcore represents an unmerged pair
somewhat.  It used to be that entries with mode=0 on both sides
were used to represent an unmerged pair, but now it has an
explicit flag.  This is to allow diff-index --cached to report
the entry from the tree when the path is unmerged in the index.

This is used in updating "git reset <tree> -- <path>" to restore
absense of the path in the index from the tree.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Do not replace /dev/null in two-line from-file/to-file diff header for
split patches ("split" patch mean more than one patch per one
diff-tree raw line) by a/file or b/file link.

Split patches differ from pair of deletion/creation patch in git diff
header: both a/file and b/file are hyperlinks, in all patches in a
split.
Signed-off-by: NJakub Narebski <jnareb@gmail.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

This reverts commit 1ebb948f,
as that patch quieted warning but was not proper solution.
The previous commit was.
Signed-off-by: NJakub Narebski <jnareb@gmail.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

We now do not skip over empty patches in git_patchset_body (where
empty means that they consist only of git diff header, and of extended
diff header, for example "pure rename" patch).  This means that after
extended diff header there can be next patch (i.e. /^diff /) or end of
patchset, and not necessary patch body (i.e. /^--- /).
Signed-off-by: NJakub Narebski <jnareb@gmail.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Fix error in git_patchset_body subroutine, which caused "rename to"/"copy
to" line in extended diff header to be displayed incorrectly.

While at it, fix align.
Signed-off-by: NJakub Narebski <jnareb@gmail.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

$from_id, $to_id variables should be local per PATCH.

Fix error in git_patchset_body for file creation (deletion) patches,
where instead of /dev/null as from-file (to-file) diff header line, it
had link to previous file with current file name.  This error occured
only if there was another patch before file creation (deletion) patch.
Signed-off-by: NJakub Narebski <jnareb@gmail.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Looks like I broke it in 747fa12c
but never noticed.
Signed-off-by: NEric Wong <normalperson@yhbt.net>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Edit for conciseness.

Add a "Making changes" section header.

When possible, make sure that stuff in text boxes could be entered literally.
(Don't use "..." unless we want a user to type that.)

Move 'commit -a' example into a literal code section, clarify that it finds
modified files automatically.
Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Clarify that dcommit creates a revision in SVN for every commit
in git.  Also, add 'merge' to the rebase vs pull section because
git-merge is now a first-class UI.
Signed-off-by: NEric Wong <normalperson@yhbt.net>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Clean svn path from leading '/' when accessing SVN repo.
Signed-off-by: NSasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

This adds ability to do import "in chunks" (default 1000 revisions),
after each chunk git repo will be repacked. The option -R is used to
change default value of chunk size (or how often repository will
repacked).
Signed-off-by: NSasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Instead, reinitialize the keywords after the fact. This avoids
conflicts with other users of log-edit mode, like pcl-cvs.
Signed-off-by: NAlexandre Julliard <julliard@winehq.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: NFredrik Kuivinen <frekui@gmail.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

It doesn't make a difference for git.el, but it helps when interacting
with git-rebase and friends.
Signed-off-by: NAlexandre Julliard <julliard@winehq.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

The 'quiet' flag is set by -q, but it's not used anywhere.
Remove it and set the 'echo1' variable instead.
Signed-off-by: NAlexandre Julliard <julliard@winehq.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Signed-off-by: NSteven Grimm <koreth@midwinter.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

If a branch other than "master" is checked out in the origin repository,
git-clone makes a local copy of that branch rather than the origin's
"master"
branch. This patch describes the actual behavior.
Signed-off-by: NSteven Grimm <koreth@midwinter.com>
Signed-off-by: NJunio C Hamano <junkio@cox.net>