- 28 9月, 2018 6 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint-2.14: Git 2.14.5 submodule-config: ban submodule paths that start with a dash submodule-config: ban submodule urls that start with dash submodule--helper: use "--" to signal end of clone options
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
We recently banned submodule urls that look like command-line options. This is the matching change to ban leading-dash paths. As with the urls, this should not break any use cases that currently work. Even with our "--" separator passed to git-clone, git-submodule.sh gets confused. Without the code portion of this patch, the clone of "-sub" added in t7417 would yield results like: /path/to/git-submodule: 410: cd: Illegal option -s /path/to/git-submodule: 417: cd: Illegal option -s /path/to/git-submodule: 410: cd: Illegal option -s /path/to/git-submodule: 417: cd: Illegal option -s Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed. Moreover, naively adding such a submodule doesn't work: $ git submodule add $url -sub The following path is ignored by one of your .gitignore files: -sub even though there is no such ignore pattern (the test script hacks around this with a well-placed "git mv"). Unlike leading-dash urls, though, it's possible that such a path _could_ be useful if we eventually made it work. So this commit should be seen not as recommending a particular policy, but rather temporarily closing off a broken and possibly dangerous code-path. We may revisit this decision later. There are two minor differences to the tests in t7416 (that covered urls): 1. We don't have a "./-sub" escape hatch to make this work, since the submodule code expects to be able to match canonical index names to the path field (so you are free to add submodule config with that path, but we would never actually use it, since an index entry would never start with "./"). 2. After this patch, cloning actually succeeds. Since we ignore the submodule.*.path value, we fail to find a config stanza for our submodule at all, and simply treat it as inactive. We still check for the "ignoring" message. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
The previous commit taught the submodule code to invoke our "git clone $url $path" with a "--" separator so that we aren't confused by urls or paths that start with dashes. However, that's just one code path. It's not clear if there are others, and it would be an easy mistake to add one in the future. Moreover, even with the fix in the previous commit, it's quite hard to actually do anything useful with such an entry. Any url starting with a dash must fall into one of three categories: - it's meant as a file url, like "-path". But then any clone is not going to have the matching path, since it's by definition relative inside the newly created clone. If you spell it as "./-path", the submodule code sees the "/" and translates this to an absolute path, so it at least works (assuming the receiver has the same filesystem layout as you). But that trick does not apply for a bare "-path". - it's meant as an ssh url, like "-host:path". But this already doesn't work, as we explicitly disallow ssh hostnames that begin with a dash (to avoid option injection against ssh). - it's a remote-helper scheme, like "-scheme::data". This _could_ work if the receiver bends over backwards and creates a funny-named helper like "git-remote--scheme". But normally there would not be any helper that matches. Since such a url does not work today and is not likely to do anything useful in the future, let's simply disallow them entirely. That protects the existing "git clone" path (in a belt-and-suspenders way), along with any others that might exist. Our tests cover two cases: 1. A file url with "./" continues to work, showing that there's an escape hatch for people with truly silly repo names. 2. A url starting with "-" is rejected. Note that we expect case (2) to fail, but it would have done so even without this commit, for the reasons given above. So instead of just expecting failure, let's also check for the magic word "ignoring" on stderr. That lets us know that we failed for the right reason. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
When we clone a submodule, we call "git clone $url $path". But there's nothing to say that those components can't begin with a dash themselves, confusing git-clone into thinking they're options. Let's pass "--" to make it clear what we expect. There's no test here, because it's actually quite hard to make these names work, even with "git clone" parsing them correctly. And we're going to restrict these cases even further in future commits. So we'll leave off testing until then; this is just the minimal fix to prevent us from doing something stupid with a badly formed entry. Reported-by: Njoernchen <joernchen@phenoelit.de> Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 22 5月, 2018 16 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint-2.14: Git 2.14.4 Git 2.13.7 verify_path: disallow symlinks in .gitmodules update-index: stat updated files earlier verify_dotfile: mention case-insensitivity in comment verify_path: drop clever fallthrough skip_prefix: add case-insensitive variant is_{hfs,ntfs}_dotgitmodules: add tests is_ntfs_dotgit: match other .git files is_hfs_dotgit: match other .git files is_ntfs_dotgit: use a size_t for traversing string submodule-config: verify submodule names as paths
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint-2.13: Git 2.13.7 verify_path: disallow symlinks in .gitmodules update-index: stat updated files earlier verify_dotfile: mention case-insensitivity in comment verify_path: drop clever fallthrough skip_prefix: add case-insensitive variant is_{hfs,ntfs}_dotgitmodules: add tests is_ntfs_dotgit: match other .git files is_hfs_dotgit: match other .git files is_ntfs_dotgit: use a size_t for traversing string submodule-config: verify submodule names as paths
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* jk/submodule-fix-loose: verify_path: disallow symlinks in .gitmodules update-index: stat updated files earlier verify_dotfile: mention case-insensitivity in comment verify_path: drop clever fallthrough skip_prefix: add case-insensitive variant is_{hfs,ntfs}_dotgitmodules: add tests is_ntfs_dotgit: match other .git files is_hfs_dotgit: match other .git files is_ntfs_dotgit: use a size_t for traversing string submodule-config: verify submodule names as paths
-
由 Jeff King 提交于
There are a few reasons it's not a good idea to make .gitmodules a symlink, including: 1. It won't be portable to systems without symlinks. 2. It may behave inconsistently, since Git may look at this file in the index or a tree without bothering to resolve any symbolic links. We don't do this _yet_, but the config infrastructure is there and it's planned for the future. With some clever code, we could make (2) work. And some people may not care about (1) if they only work on one platform. But there are a few security reasons to simply disallow it: a. A symlinked .gitmodules file may circumvent any fsck checks of the content. b. Git may read and write from the on-disk file without sanity checking the symlink target. So for example, if you link ".gitmodules" to "../oops" and run "git submodule add", we'll write to the file "oops" outside the repository. Again, both of those are problems that _could_ be solved with sufficient code, but given the complications in (1) and (2), we're better off just outlawing it explicitly. Note the slightly tricky call to verify_path() in update-index's update_one(). There we may not have a mode if we're not updating from the filesystem (e.g., we might just be removing the file). Passing "0" as the mode there works fine; since it's not a symlink, we'll just skip the extra checks. Signed-off-by: NJeff King <peff@peff.net>
-
由 Jeff King 提交于
In the update_one(), we check verify_path() on the proposed path before doing anything else. In preparation for having verify_path() look at the file mode, let's stat the file earlier, so we can check the mode accurately. This is made a bit trickier by the fact that this function only does an lstat in a few code paths (the ones that flow down through process_path()). So we can speculatively do the lstat() here and pass the results down, and just use a dummy mode for cases where we won't actually be updating the index from the filesystem. Signed-off-by: NJeff King <peff@peff.net>
-
由 Jeff King 提交于
We're more restrictive than we need to be in matching ".GIT" on case-sensitive filesystems; let's make a note that this is intentional. Signed-off-by: NJeff King <peff@peff.net>
-
由 Jeff King 提交于
We check ".git" and ".." in the same switch statement, and fall through the cases to share the end-of-component check. While this saves us a line or two, it makes modifying the function much harder. Let's just write it out. Signed-off-by: NJeff King <peff@peff.net>
-
由 Jeff King 提交于
We have the convenient skip_prefix() helper, but if you want to do case-insensitive matching, you're stuck doing it by hand. We could add an extra parameter to the function to let callers ask for this, but the function is small and somewhat performance-critical. Let's just re-implement it for the case-insensitive version. Signed-off-by: NJeff King <peff@peff.net>
-
由 Johannes Schindelin 提交于
This tests primarily for NTFS issues, but also adds one example of an HFS+ issue. Thanks go to Congyi Wu for coming up with the list of examples where NTFS would possibly equate the filename with `.gitmodules`. Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJeff King <peff@peff.net>
-
由 Johannes Schindelin 提交于
When we started to catch NTFS short names that clash with .git, we only looked for GIT~1. This is sufficient because we only ever clone into an empty directory, so .git is guaranteed to be the first subdirectory or file in that directory. However, even with a fresh clone, .gitmodules is *not* necessarily the first file to be written that would want the NTFS short name GITMOD~1: a malicious repository can add .gitmodul0000 and friends, which sorts before `.gitmodules` and is therefore checked out *first*. For that reason, we have to test not only for ~1 short names, but for others, too. It's hard to just adapt the existing checks in is_ntfs_dotgit(): since Windows 2000 (i.e., in all Windows versions still supported by Git), NTFS short names are only generated in the <prefix>~<number> form up to number 4. After that, a *different* prefix is used, calculated from the long file name using an undocumented, but stable algorithm. For example, the short name of .gitmodules would be GITMOD~1, but if it is taken, and all of ~2, ~3 and ~4 are taken, too, the short name GI7EBA~1 will be used. From there, collisions are handled by incrementing the number, shortening the prefix as needed (until ~9999999 is reached, in which case NTFS will not allow the file to be created). We'd also want to handle .gitignore and .gitattributes, which suffer from a similar problem, using the fall-back short names GI250A~1 and GI7D29~1, respectively. To accommodate for that, we could reimplement the hashing algorithm, but it is just safer and simpler to provide the known prefixes. This algorithm has been reverse-engineered and described at https://usn.pw/blog/gen/2015/06/09/filenames/, which is defunct but still available via https://web.archive.org/. These can be recomputed by running the following Perl script: -- snip -- use warnings; use strict; sub compute_short_name_hash ($) { my $checksum = 0; foreach (split('', $_[0])) { $checksum = ($checksum * 0x25 + ord($_)) & 0xffff; } $checksum = ($checksum * 314159269) & 0xffffffff; $checksum = 1 + (~$checksum & 0x7fffffff) if ($checksum & 0x80000000); $checksum -= (($checksum * 1152921497) >> 60) * 1000000007; return scalar reverse sprintf("%x", $checksum & 0xffff); } print compute_short_name_hash($ARGV[0]); -- snap -- E.g., running that with the argument ".gitignore" will result in "250a" (which then becomes "gi250a" in the code). Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJeff King <peff@peff.net>
-
由 Jeff King 提交于
Both verify_path() and fsck match ".git", ".GIT", and other variants specific to HFS+. Let's allow matching other special files like ".gitmodules", which we'll later use to enforce extra restrictions via verify_path() and fsck. Signed-off-by: NJeff King <peff@peff.net>
-
由 Jeff King 提交于
We walk through the "name" string using an int, which can wrap to a negative value and cause us to read random memory before our array (e.g., by creating a tree with a name >2GB, since "int" is still 32 bits even on most 64-bit platforms). Worse, this is easy to trigger during the fsck_tree() check, which is supposed to be protecting us from malicious garbage. Note one bit of trickiness in the existing code: we sometimes assign -1 to "len" at the end of the loop, and then rely on the "len++" in the for-loop's increment to take it back to 0. This is still legal with a size_t, since assigning -1 will turn into SIZE_MAX, which then wraps around to 0 on increment. Signed-off-by: NJeff King <peff@peff.net>
-
由 Jeff King 提交于
Submodule "names" come from the untrusted .gitmodules file, but we blindly append them to $GIT_DIR/modules to create our on-disk repo paths. This means you can do bad things by putting "../" into the name (among other things). Let's sanity-check these names to avoid building a path that can be exploited. There are two main decisions: 1. What should the allowed syntax be? It's tempting to reuse verify_path(), since submodule names typically come from in-repo paths. But there are two reasons not to: a. It's technically more strict than what we need, as we really care only about breaking out of the $GIT_DIR/modules/ hierarchy. E.g., having a submodule named "foo/.git" isn't actually dangerous, and it's possible that somebody has manually given such a funny name. b. Since we'll eventually use this checking logic in fsck to prevent downstream repositories, it should be consistent across platforms. Because verify_path() relies on is_dir_sep(), it wouldn't block "foo\..\bar" on a non-Windows machine. 2. Where should we enforce it? These days most of the .gitmodules reads go through submodule-config.c, so I've put it there in the reading step. That should cover all of the C code. We also construct the name for "git submodule add" inside the git-submodule.sh script. This is probably not a big deal for security since the name is coming from the user anyway, but it would be polite to remind them if the name they pick is invalid (and we need to expose the name-checker to the shell anyway for our test scripts). This patch issues a warning when reading .gitmodules and just ignores the related config entry completely. This will generally end up producing a sensible error, as it works the same as a .gitmodules file which is missing a submodule entry (so "submodule update" will barf, but "git clone --recurse-submodules" will print an error but not abort the clone. There is one minor oddity, which is that we print the warning once per malformed config key (since that's how the config subsystem gives us the entries). So in the new test, for example, the user would see three warnings. That's OK, since the intent is that this case should never come up outside of malicious repositories (and then it might even benefit the user to see the message multiple times). Credit for finding this vulnerability and the proof of concept from which the test script was adapted goes to Etienne Stalmans. Signed-off-by: NJeff King <peff@peff.net>
-
- 07 12月, 2017 13 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Clarify and enhance documentation for "merge-base --fork-point", as it was clear what it computed but not why/what for. * jc/merge-base-fork-point-doc: merge-base --fork-point doc: clarify the example and failure modes
-
由 Junio C Hamano 提交于
A few scripts (both in production and tests) incorrectly redirected their error output. These have been corrected. * tz/redirect-fix: rebase: fix stderr redirect in apply_autostash() t/lib-gpg: fix gpgconf stderr redirect to /dev/null
-
由 Junio C Hamano 提交于
"git notes" sent its error message to its standard output stream, which was corrected. * tz/notes-error-to-stderr: notes: send "Automatic notes merge failed" messages to stderr
-
由 Junio C Hamano 提交于
The three-way merge performed by "git cherry-pick" was confused when a new submodule was added in the meantime, which has been fixed (or "papered over"). * sb/test-cherry-pick-submodule-getting-in-a-way: merge-recursive: handle addition of submodule on our side of history t/3512: demonstrate unrelated submodule/file conflict as cherry-pick failure
-
由 Junio C Hamano 提交于
The sequencer machinery (used by "git cherry-pick A..B", and "git rebase -i", among other things) would have lost a commit if stopped due to an unlockable index file, which has been fixed. * pw/sequencer-recover-from-unlockable-index: sequencer: reschedule pick if index can't be locked
-
由 Junio C Hamano 提交于
"git apply --inaccurate-eof" when used with "--ignore-space-change" triggered an internal sanity check, which has been fixed. * rs/apply-inaccurate-eof-with-incomplete-line: apply: update line lengths for --inaccurate-eof
-
由 Junio C Hamano 提交于
Command line completion (in contrib/) has been taught about the "--copy" option of "git branch". * tz/complete-branch-copy: completion: add '--copy' option to 'git branch'
-
由 Junio C Hamano 提交于
When "git rebase" prepared an mailbox of changes and fed it to "git am" to replay them, it was confused when a stray "From " happened to be in the log message of one of the replayed changes. This has been corrected. * ew/rebase-mboxrd: rebase: use mboxrd format to avoid split errors
-
由 Junio C Hamano 提交于
Code clean-up. * sd/branch-copy: config: avoid "write_in_full(fd, buf, len) != len" pattern
-
由 Junio C Hamano 提交于
Contrary to the documentation, "git pull -4/-6 other-args" did not ask the underlying "git fetch" to go over IPv4/IPv6, which has been corrected. * sw/pull-ipv46-passthru: pull: pass -4/-6 option to 'git fetch'
-
由 Junio C Hamano 提交于
The SubmittingPatches document has been converted to produce an HTML version via AsciiDoc/Asciidoctor. * bc/submitting-patches-in-asciidoc: Documentation: convert SubmittingPatches to AsciiDoc Documentation: enable compat-mode for Asciidoctor
-
由 Junio C Hamano 提交于
Recent update to the refs infrastructure implementation started rewriting packed-refs file more often than before; this has been optimized again for most trivial cases. * mh/avoid-rewriting-packed-refs: files-backend: don't rewrite the `packed-refs` file unnecessarily t1409: check that `packed-refs` is not rewritten unnecessarily
-
- 28 11月, 2017 2 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
There was a recent semantic mismerge in the codepath to write out a section of a configuration section, which has been corrected. * rs/config-write-section-fix: config: flip return value of write_section()
-
- 27 11月, 2017 3 次提交
-
-
由 Junio C Hamano 提交于
We've been waiting long enough, a few more would not hurt ;-) Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Leak fixes. * ma/reduce-heads-leakfix: reduce_heads: fix memory leaks builtin/merge-base: free commit lists
-
由 Junio C Hamano 提交于
Leak fixes. * ma/bisect-leakfix: bisect: fix memory leak when returning best element bisect: fix off-by-one error in `best_bisection_sorted()` bisect: fix memory leak in `find_bisection()` bisect: change calling-convention of `find_bisection()`
-