- 07 1月, 2007 20 次提交
-
-
由 Junio C Hamano 提交于
* jc/remote: git-remote
-
由 Junio C Hamano 提交于
When <path> exists in the index (either merged or unmerged), and <tree> does not have it, git-reset should be usable to restore the absense of it from the tree. This implements it. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This updates the way diffcore represents an unmerged pair somewhat. It used to be that entries with mode=0 on both sides were used to represent an unmerged pair, but now it has an explicit flag. This is to allow diff-index --cached to report the entry from the tree when the path is unmerged in the index. This is used in updating "git reset <tree> -- <path>" to restore absense of the path in the index from the tree. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Do not replace /dev/null in two-line from-file/to-file diff header for split patches ("split" patch mean more than one patch per one diff-tree raw line) by a/file or b/file link. Split patches differ from pair of deletion/creation patch in git diff header: both a/file and b/file are hyperlinks, in all patches in a split. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
This reverts commit 1ebb948f, as that patch quieted warning but was not proper solution. The previous commit was. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
We now do not skip over empty patches in git_patchset_body (where empty means that they consist only of git diff header, and of extended diff header, for example "pure rename" patch). This means that after extended diff header there can be next patch (i.e. /^diff /) or end of patchset, and not necessary patch body (i.e. /^--- /). Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Fix error in git_patchset_body subroutine, which caused "rename to"/"copy to" line in extended diff header to be displayed incorrectly. While at it, fix align. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
$from_id, $to_id variables should be local per PATCH. Fix error in git_patchset_body for file creation (deletion) patches, where instead of /dev/null as from-file (to-file) diff header line, it had link to previous file with current file name. This error occured only if there was another patch before file creation (deletion) patch. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Eric Wong 提交于
Looks like I broke it in 747fa12c but never noticed. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 J. Bruce Fields 提交于
Edit for conciseness. Add a "Making changes" section header. When possible, make sure that stuff in text boxes could be entered literally. (Don't use "..." unless we want a user to type that.) Move 'commit -a' example into a literal code section, clarify that it finds modified files automatically. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Eric Wong 提交于
Clarify that dcommit creates a revision in SVN for every commit in git. Also, add 'merge' to the rebase vs pull section because git-merge is now a first-class UI. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Sasha Khapyorsky 提交于
Clean svn path from leading '/' when accessing SVN repo. Signed-off-by: NSasha Khapyorsky <sashak@voltaire.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Sasha Khapyorsky 提交于
This adds ability to do import "in chunks" (default 1000 revisions), after each chunk git repo will be repacked. The option -R is used to change default value of chunk size (or how often repository will repacked). Signed-off-by: NSasha Khapyorsky <sashak@voltaire.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Alexandre Julliard 提交于
Instead, reinitialize the keywords after the fact. This avoids conflicts with other users of log-edit mode, like pcl-cvs. Signed-off-by: NAlexandre Julliard <julliard@winehq.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Fredrik Kuivinen 提交于
Signed-off-by: NFredrik Kuivinen <frekui@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Alexandre Julliard 提交于
It doesn't make a difference for git.el, but it helps when interacting with git-rebase and friends. Signed-off-by: NAlexandre Julliard <julliard@winehq.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Alexandre Julliard 提交于
The 'quiet' flag is set by -q, but it's not used anywhere. Remove it and set the 'echo1' variable instead. Signed-off-by: NAlexandre Julliard <julliard@winehq.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Steven Grimm 提交于
Signed-off-by: NSteven Grimm <koreth@midwinter.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Steven Grimm 提交于
If a branch other than "master" is checked out in the origin repository, git-clone makes a local copy of that branch rather than the origin's "master" branch. This patch describes the actual behavior. Signed-off-by: NSteven Grimm <koreth@midwinter.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 René Scharfe 提交于
In order to make the generated tar files more friendly to users who extract them as root using GNU tar and its implied -p option, change the default umask to 002 and change the owner name and group name to root. This ensures that a) the extracted files and directories are not world-writable and b) that they belong to user and group root. Before they would have been assigned to a user and/or group named git if it existed. This also answers the question in the removed comment: uid=0, gid=0, uname=root, gname=root is exactly what we want. Normal users who let tar apply their umask while extracting are only affected if their umask allowed the world to change their files (e.g. a umask of zero). This case is so unlikely and strange that we don't need to support it. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 06 1月, 2007 2 次提交
-
-
由 Junio C Hamano 提交于
The earlier test timestamp was too old; I forgot that the bare unixtime integer had to be after Jan 1, 2000. This changes test_tick to use the git-epoch timestamp. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Somehow we forgot to turn save_commit_buffer off while walking the reachable objects. Releasing the memory for commit object data that we do not use matters for large projects (for example, about 90MB is saved while traversing linux-2.6 history). Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 05 1月, 2007 11 次提交
-
-
由 Junio C Hamano 提交于
It might be handy to have a single command that helps you manage your configuration that relates to downloading from remote repositories. This currently does only about 20% of what I want it to do. $ git remote shows the list of 'remotes' you have defined somewhere, and $ git remote origin shows the details about the named remote (in this case "origin"). How the branches are tracked, if you have a tracking branch that is stale, etc. $ git add another git://git.kernel.org/pub/... defines the default remote.another.url and remote.another.fetch entries just like a clone does; you can say "git fetch another" afterwards. For it to be useful, I think it should be enhanced to: - check overlaps of tracking branches and warn; - offer to remove stale tracking branches in one go; - offer ways to remove or rename remote; - offer ways to update an existing remote, perhaps have an interactive mode; Other enhancements might be also possible, but I do not think of anything that is absolutely necessary other than the above right now. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Luben Tuikov 提交于
Blame currently displays the commit id which introduced a block of one or more lines, the line numbers wrt the current listing of the file and the file's line contents. The commit id displayed is hyperlinked to the commit. Currently the linenr links are hyperlinked to the same commit id displayed to the left, which is _no_ different than the block of lines displayed, since it is the _same commit_ that is hyperlinked. And thus clicking on it leads to the same state of the file for that chunk of lines. I.e. data mining is not currently possible with gitweb given a chunk of lines introduced by a commit. This patch makes such data mining possible. The line numbers are now hyperlinked to the parent of the commit id of the block of lines. Furthermore they are linked to the line where that block was introduced. Thus clicking on a linenr link will show you the file's line(s) state prior to the commit id you were viewing. So clicking continually on a linenr link shows you how this line and its line number changed over time, leading to the initial commit where it was first introduced. Signed-off-by: NLuben Tuikov <ltuikov@yahoo.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Fix "Use of uninitialized value" warning in git_tags_body generated for lightweight tags of tree and blob object; those don't have age ($tag{'age'}) defined. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Eric Wong 提交于
Since fetch reforks itself at most every 1000 revisions, we need to update the counter in the parent process to have a working count if we set our repack interval to be > ~1000 revisions. multi-fetch has always done this correctly because of an extra process; now fetch uses the extra process; as well. While we're at it, only compile the $sha1 regex that checks for repacking once. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Eric Wong 提交于
Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Eric Wong 提交于
It now requires at least one of the (trunk|branch|tags) arguments (either from the command-line or in .git/config). Also we make sure that anything that is passed as a URL ('help') in David's case is actually a URL. Thanks to David Kågedal for reporting this issue. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 René Scharfe 提交于
The variable named entry is allocated using malloc() and then forgotten, it being shadowed by an automatic variable of the same name. Fixing the array size at 3 worked so far because the only caller of traverse_trees() needed only as much entries. Simply remove the shadowing varaible and we're able to traverse more than three trees and save stack space at the same time! Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 René Scharfe 提交于
This fixes sparse complaining about a missing include file if 'make check' is run on clean sources. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
There was an obvious thinko in memmove() to remove an entry that was resolved from the in-core data structure. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
* maint: pack-check.c::verify_packfile(): don't run SHA-1 update on huge data Fix infinite loop when deleting multiple packed refs.
-
由 Junio C Hamano 提交于
Running the SHA1_Update() on the whole packfile in a single call revealed an overflow problem we had in the SHA-1 implementation on POWER architecture some time ago, which was fixed with commit b47f509b (June 19, 2006). Other SHA-1 implementations may have a similar problem. The sliding mmap() series already makes chunked calls to SHA1_Update(), so this patch itself will become moot when it graduates to "master", but in the meantime, run the hash function in smaller chunks to prevent possible future problems. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 04 1月, 2007 7 次提交
-
-
由 Robert Fitzsimons 提交于
My change in 190d7fdc had a small bug found by Michael Krufky which caused the passed in hash value to be ignored, so shortlog would only show the HEAD revision. Signed-off-by: NRobert Fitzsimons <robfitz@273k.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Santi Béjar 提交于
This way "git tag -v $tag" is the UI for git-verify-tag. Signed-off-by: NSanti Béjar <sbejar@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Lars Hjemli 提交于
This moves the guts of print_ref_list() into a revamped print_ref_info(), which at the same time gets renamed to print_ref_item(). Signed-off-by: NLars Hjemli <hjemli@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
We now do not skip over empty patches in git_patchset_body (where empty means that they consist only of git diff header, and of extended diff header), so uncomment branch of code dealing with empty patches (patches which do not have even two-line from/to header) Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Fix bug in git_difftree_body subroutine; it was used '!=' comparison operator for strings (file type) instead of correct 'ne'. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Santi Béjar 提交于
- Teach how to delete a branch with "git branch -d name". - Usually a commit has one parent; merge has more. - Teach "git show" instead of "git cat-file -p". Signed-off-by: NSanti Béjar <sbejar@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-