- 07 6月, 2007 1 次提交
-
-
由 Matthias Lederhofer 提交于
setup_gdg is used as abbreviation for setup_git_directory_gently. The work tree can be specified using the environment variable GIT_WORK_TREE and the config option core.worktree (the environment variable has precendence over the config option). Additionally there is a command line option --work-tree which sets the environment variable. setup_gdg does the following now: GIT_DIR unspecified repository in .git directory parent directory of the .git directory is used as work tree, GIT_WORK_TREE is ignored GIT_DIR unspecified repository in cwd GIT_DIR is set to cwd see the cases with GIT_DIR specified what happens next and also see the note below GIT_DIR specified GIT_WORK_TREE/core.worktree unspecified cwd is used as work tree GIT_DIR specified GIT_WORK_TREE/core.worktree specified the specified work tree is used Note on the case where GIT_DIR is unspecified and repository is in cwd: GIT_WORK_TREE is used but is_inside_git_dir is always true. I did it this way because setup_gdg might be called multiple times (e.g. when doing alias expansion) and in successive calls setup_gdg should do the same thing every time. Meaning of is_bare/is_inside_work_tree/is_inside_git_dir: (1) is_bare_repository A repository is bare if core.bare is true or core.bare is unspecified and the name suggests it is bare (directory not named .git). The bare option disables a few protective checks which are useful with a working tree. Currently this changes if a repository is bare: updates of HEAD are allowed git gc packs the refs the reflog is disabled by default (2) is_inside_work_tree True if the cwd is inside the associated working tree (if there is one), false otherwise. (3) is_inside_git_dir True if the cwd is inside the git directory, false otherwise. Before this patch is_inside_git_dir was always true for bare repositories. When setup_gdg finds a repository git_config(git_default_config) is always called. This ensure that is_bare_repository makes use of core.bare and does not guess even though core.bare is specified. inside_work_tree and inside_git_dir are set if setup_gdg finds a repository. The is_inside_work_tree and is_inside_git_dir functions will die if they are called before a successful call to setup_gdg. Signed-off-by: NMatthias Lederhofer <matled@gmx.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 11 3月, 2007 1 次提交
-
-
由 Matthias Lederhofer 提交于
don't tell getcwd that the buffer has one spare byte for an extra / Signed-off-by: NMatthias Lederhofer <matled@gmx.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 21 2月, 2007 1 次提交
-
-
由 Junio C Hamano 提交于
This mechanically converts strncmp() to use prefixcmp(), but only when the parameters match specific patterns, so that they can be verified easily. Leftover from this will be fixed in a separate step, including idiotic conversions like if (!strncmp("foo", arg, 3)) => if (!(-prefixcmp(arg, "foo"))) This was done by using this script in px.perl #!/usr/bin/perl -i.bak -p if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) { s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|; } if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) { s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|; } and running: $ git grep -l strncmp -- '*.c' | xargs perl px.perl Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 21 1月, 2007 1 次提交
-
-
由 Johannes Schindelin 提交于
For example, it makes no sense to check the presence of a file named "HEAD" when calling "git log HEAD" in a bare repository. Noticed by Han-Wen Nienhuys. Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de>
-
- 08 1月, 2007 1 次提交
-
-
由 Junio C Hamano 提交于
This allows "git checkout v1.4.3" to dissociate the HEAD of repository from any branch. After this point, "git branch" starts reporting that you are not on any branch. You can go back to an existing branch by saying "git checkout master", for example. This is still experimental. While I think it makes sense to allow commits on top of detached HEAD, it is rather dangerous unless you are careful in the current form. Next "git checkout master" will obviously lose what you have done, so we might want to require "git checkout -f" out of a detached HEAD if we find that the HEAD commit is not an ancestor of any other branches. There is no such safety valve implemented right now. On the other hand, the reason the user did not start the ad-hoc work on a new branch with "git checkout -b" was probably because the work was of a throw-away nature, so the convenience of not having that safety valve might be even better. The user, after accumulating some commits on top of a detached HEAD, can always create a new branch with "git checkout -b" not to lose useful work done while the HEAD was detached. We'll see. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 31 12月, 2006 1 次提交
-
-
由 Shawn O. Pearce 提交于
Many users find it unfriendly that they can create a bare git repository easily with `git clone --bare` but are then unable to run simple commands like `git log` once they cd into that newly created bare repository. This occurs because we do not check to see if the current working directory is a git repository. Instead of failing out with "fatal: Not a git repository" we should try to automatically detect if the current working directory is a bare repository and use that for GIT_DIR, and fail out only if that doesn't appear to be true. We test the current working directory only after we have tried searching up the directory tree. This is to retain backwards compatibility with our previous behavior on the off chance that a user has a 'refs' and 'objects' subdirectories and a 'HEAD' file that looks like a symref, all stored within a repository's associated working directory. This change also consolidates the validation logic between the case of GIT_DIR being supplied and GIT_DIR not being supplied, cleaning up the code. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 31 10月, 2006 1 次提交
-
-
由 Shawn Pearce 提交于
The 'receive.denynonfastforwards' option has nothing to do with the repository format version. Since receive-pack already uses git_config to initialize itself before executing any updates we can use the normal configuration strategy and isolate the receive specific variables away from the core variables. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 21 9月, 2006 1 次提交
-
-
由 Johannes Schindelin 提交于
If receive.denyNonFastforwards is set to true, git-receive-pack will deny non fast-forwards, i.e. forced updates. Most notably, a push to a repository which has that flag set will fail. As a first user, 'git-init-db --shared' sets this flag, since in a shared setup, you are most unlikely to want forced pushes to succeed. Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 05 8月, 2006 1 次提交
-
-
由 Johannes Schindelin 提交于
We used to test if a pointer was NULL, and if it was, try to access it. Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 31 7月, 2006 1 次提交
-
-
由 Matthias Lederhofer 提交于
Earlier we barfed when GIT_DIR environment variable points at a directory yet to be created, which made it impossible to use configuration mechanism in "git-init-db". Signed-off-by: NMatthias Lederhofer <matled@gmx.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 10 6月, 2006 1 次提交
-
-
由 Junio C Hamano 提交于
This enhances core.sharedrepository to have additionally specify that read and exec permissions to be given to others as well. It is useful when serving a repository via gitweb and git-daemon that runs as a user outside the project group. The configuration item can take the following values: [core] sharedrepository ; the same as "group" sharedrepository = true ; ditto sharedrepository = 1 ; ditto sharedrepository = group ; allow rwx to group sharedrepository = all ; allow rwx to group, allow rx to other sharedrepository = umask ; not shared - use umask It also extends "git init-db" to take "--shared=all" and friends from the command line. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 27 4月, 2006 2 次提交
-
-
由 Junio C Hamano 提交于
If you don't have a "--" marker, then: - all of the arguments we are going to assume are pathspecs must exist in the working tree. - none of the arguments we parsed as revisions could be interpreted as a filename. so that there really isn't any possibility of confusion in case somebody does have a revision that looks like a pathname too. The former rule has been in effect; this implements the latter. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Linus Torvalds 提交于
When we are in a subdirectory of a git archive, we need to take the prefix of that subdirectory into accoung when we verify filename arguments. Noted by Matthias Lederhofer This also uses the improved error reporting for all the other git commands that use the revision parsing interfaces, not just git-rev-parse. Also, it makes the error reporting for mixed filenames and argument flags clearer (you cannot put flags after the start of the pathname list). [jc: with fix to a trivial typo noticed by Timo Hirvonen] Signed-off-by: NLinus Torvalds <torvalds@osdl.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 24 12月, 2005 1 次提交
-
-
由 Johannes Schindelin 提交于
If the config variable 'core.sharedrepository' is set, the directories $GIT_DIR/objects/ $GIT_DIR/objects/?? $GIT_DIR/objects/pack $GIT_DIR/refs $GIT_DIR/refs/heads $GIT_DIR/refs/heads/tags are set group writable (and g+s, since the git group may be not the primary group of all users). Since all files are written as lock files first, and then moved to their destination, they do not have to be group writable. Indeed, if this leads to problems you found a bug. Note that -- as in my first attempt -- the config variable is set in the function which checks the repository format. If this were done in git_default_config instead, a lot of programs would need to be modified to call git_config(git_default_config) first. [jc: git variables should be in environment.c unless there is a compelling reason to do otherwise.] Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 01 12月, 2005 1 次提交
-
-
由 Tommi Virtanen 提交于
Dereference the environment variable before using it. Signed-off-by: NTommi Virtanen <tv@inoi.fi> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 29 11月, 2005 1 次提交
-
-
由 Junio C Hamano 提交于
- prefix_filename() is like prefix_path() but can be used to name any file on the filesystem, not the files that might go into the index file. - setup_git_directory_gently() tries to find the GIT_DIR, but does not die() if called outside a git repository. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 27 11月, 2005 2 次提交
-
-
由 Junio C Hamano 提交于
After figuring out the GIT_DIR location, make sure the repository is of the right vintage, by calling check_repository_format(). . Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This adds the repository format version code, first done by Martin Atukunda. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 26 11月, 2005 1 次提交
-
-
由 Junio C Hamano 提交于
setup_git_directory() always trusted what the user told where GIT_DIR was, and assumed that is a valid .git/ directory. This commit changes it to at least do the same level validation as is_toplevel_directory() does -- has refs/, has objects/ unless GIT_OBJECT_DIRECTORY is set, and has valid HEAD symlink or symref. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 02 10月, 2005 1 次提交
-
-
由 Junio C Hamano 提交于
This adds the counterpart of git-update-ref that lets you read and create "symbolic refs". By default it uses a symbolic link to represent ".git/HEAD -> refs/heads/master", but it can be compiled to use the textfile symbolic ref. The places that did 'readlink .git/HEAD' and 'ln -s refs/heads/blah .git/HEAD' have been converted to use new git-symbolic-ref command, so that they can deal with either implementation. Signed-off-by: NJunio C Hamano <junio@twinsun.com>
-
- 25 9月, 2005 1 次提交
-
-
由 Junio C Hamano 提交于
This is a long overdue clean-up to the code for parsing and passing diff options. It also tightens some constness issues. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 10 9月, 2005 1 次提交
-
-
由 Junio C Hamano 提交于
We have deprecated the old environment variable names for quite a while and now it's time to remove them. Gone are: SHA1_FILE_DIRECTORIES AUTHOR_DATE AUTHOR_EMAIL AUTHOR_NAME COMMIT_AUTHOR_EMAIL COMMIT_AUTHOR_NAME SHA1_FILE_DIRECTORY Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 28 8月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Inspired by a report by Kalle Valo, this changes git-sh-setup-script and the "setup_git_directory()" function to test that $GIT_DIR/HEAD is a symlink, since a number of core git features depend on that these days. We used to allow a regular file there, but git-fsck-cache has been complaining about that for a while, and anything that uses branches depends on the HEAD file being a symlink, so let's just encode that as a fundamental requirement. Before, a non-symlink HEAD file would appear to work, but have subtle bugs like not having the HEAD show up as a valid reference (because it wasn't under "refs"). Now, we will complain loudly, and the user can fix it up trivially instead of getting strange behaviour. This also removes the tests for "$GIT_DIR" and "$GIT_OBJECT_DIRECTORY" being directories, since the other tests will implicitly test for that anyway (ie the tests for HEAD, refs and 00 would fail). Signed-off-by: NLinus Torvalds <torvalds@osdl.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 18 8月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Not all programs necessarily have a pathspec array of pathnames, some of them (like git-update-cache) want to do things one file at a time. So export the single-path interface too. Signed-off-by: NLinus Torvalds <torvalds@osdl.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 17 8月, 2005 3 次提交
-
-
由 Linus Torvalds 提交于
This fixes up usage of ".." (without an ending slash) and "." (with or without the ending slash) in the git diff family. It also fixes pathspec matching for the case of an empty pathspec, since a "." in the top-level directory (or enough ".." under subdirectories) will result in an empty pathspec. We used to not match it against anything, but it should in fact match everything. Signed-off-by: NLinus Torvalds <torvalds@osdl.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Linus Torvalds 提交于
We may not actually have a valid HEAD at all times, so relax the validity tests for a .git subdirectory accordingly. Signed-off-by: NLinus Torvalds <torvalds@osdl.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Linus Torvalds 提交于
We always show the diff as an absolute path, but pathnames to diff are taken relative to the current working directory (and if no pathnames are given, the default ends up being all of the current working directory). Note that "../xyz" also works, so you can do cd linux/drivers/char git diff ../block and it will generate a diff of the linux/drivers/block changes. Signed-off-by: NLinus Torvalds <torvalds@osdl.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-