- 03 8月, 2010 5 次提交
-
-
由 Junio C Hamano 提交于
* ab/tap: test-lib: Remove 3 year old no-op --no-python option test-lib: Ignore --quiet under a TAP harness
-
由 Ævar Arnfjörð Bjarmason 提交于
The --no-python option was added to test-lib.sh by Johannes Schindelin in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C Hamano in 7cdbff14 the same year. Over three years is long enough before removing this old wart which was retained for backwards compatibility. Our tests have been using NO_PYTHON and "test_have_prereq PYTHON" for a long time now. Signed-off-by: NÆvar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ævar Arnfjörð Bjarmason 提交于
Running the tests with --quiet under a TAP harness will always fail, since a TAP harness always needs actual test output to go along with the plan that's being emitted. Change the test-lib.sh to ignore the --quiet option under HARNESS_ACTIVE to work around this. Then users that have --quiet in their GIT_TEST_OPTS can run tests under prove(1) without everything breaking. Signed-off-by: NÆvar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Rast 提交于
When calling rev-parse --parseopt, as in the (now fixed) documented example eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)" the outermost quoting is required, as otherwise all runs of arbitrary whitespace inside the resulting 'set -- ...' call would be collapsed into a single space. This was exposed as a result of our new use of cat <<\EOF since 47e9cd28 (parseopt: wrap rev-parse --parseopt usage for eval consumption, 2010-06-12), but has always been a problem when handling arguments containing e.g. newlines. Point this out in the documentation, and in particular correct the example that did not have the quotes. Noticed-by: NJoshua Jensen <jjensen@workspacewhiz.com> Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 29 7月, 2010 2 次提交
-
-
由 David D. Kilzer 提交于
When performing a non-interactive rebase, sometimes "git rebase --continue" will fail if an unmodified file is touched in the working directory: You must edit all merge conflicts and then mark them as resolved using git add This is caused by "git diff-files" reporting a difference between the index and the filesystem: :100644 100644 d00491...... 000000...... M file The fix is to run "git update-index --refresh" before "git diff-files" as is done in git-rebase--interactive. Signed-off-by: NDavid D. Kilzer <ddkilzer@kilzer.net> Acked-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Matthieu Moy 提交于
The behavior of "git ls-files -t" is very misleading (see http://thread.gmane.org/gmane.comp.version-control.git/126516 and http://thread.gmane.org/gmane.comp.version-control.git/144394/focus=144397 for examples of mislead users) and badly documented, hence we point the users to superior alternatives. The feature is marked as "semi-obsolete" but not "scheduled for removal" since it's a plumbing command, scripts might use it, and Git testsuite already uses it to test the state of the index. Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 28 7月, 2010 10 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
If $HOME is unset (as in some automated build situations), currently git config --path path.home "~" git config --path --get path.home segfaults. Error out with Failed to expand user dir in: '~/' instead. Reported-by: NJulien Cristau <jcristau@debian.org> Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Stephen Boyd 提交于
From api-parse-options.txt: `description` is a short string to describe the effect of the option. It shall begin with a lower-case letter and a full stop (`.`) shall be omitted at the end. It also makes it less confusing if the argument is 'no.' or 'no'. Signed-off-by: NStephen Boyd <bebarino@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Matthieu Moy 提交于
The message is especially confusing when "git fetch" is ran from "git pull", for users not aware of "git fetch". The new message makes it clear that "fetch" means "fetch new revisions", and gives hint on the solution. We don't add a advice.* configuration option since this message doesn't appear in normal use, and shouldn't disturb advanced users. Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Rast 提交于
The manpage was added in 1ed6f2c5 (Documentation: gitrevisions, 2010-07-05), but since it does not have a corresponding git command, it needs an exception for check-docs. Signed-off-by: NThomas Rast <trast@student.ethz.ch> Acked-by: NMichael J Gruber <git@drmicha.warpmail.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Rast 提交于
8b1fa778 (Allow passing of configuration parameters in the command line, 2010-03-26) forgot the closing ']' for the -c option. While we're there, also rewrap. Instead of folding the last two lines together, try to highlight that COMMAND is required by starting a line with it. Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 26 7月, 2010 15 次提交
-
-
由 Thomas Rast 提交于
Mention the effects of the receive.deny* family of options for the "remote rejected" case. While there, also split up the explanation into an easier-to-parse list format. Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Rast 提交于
This option was introduced by 747ca245 (receive-pack: receive.denyDeleteCurrent, 2009-02-08) but never documented. Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Rast 提交于
The NULL sentinel argument to the execl*() family of calls must be cast to (char *), as otherwise: - platforms where NULL is just 0 (not (void *)) would pass an int - (admittedly esoteric) platforms where NULL is (void *)0 and (void *) and (char *) have different memory layouts would pass the wrong kind of pointer Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jon Seymour 提交于
Without additional configuration steps, the documentation build on Cygwin fails because the XML catalog is missing required rewrites for certain docbook resources. This patch documents the required configuration. Signed-off-by: NJon Seymour <jon.seymour@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Johannes Sixt 提交于
One test case checked the stdout and stderr of 'git add' by constructing a single 'expect' file that contained both streams. But when the command runs, the order of stdout and stderr output is unpredictable because it depends on how the streams are buffered. At least on Windows, the buffering is different from what the test case expected. Hence, check the two output texts separately. Signed-off-by: NJohannes Sixt <j6t@kdbg.org> Acked-by: NJens Lehmann <Jens.Lehmann@web.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
On systems with an echo which defaults to the XSI-conformant behavior (Solaris, or others using Ksh), echo will interpret certain backslashed characters as control sequences. This can cause a problem for interactive rebase when it is used to rebase commits whose commit "subject" (the first line) contains any of these backslashed sequences. In this case, echo will substitute the control sequence for the backslashed characters and either the rebased commit message will differ from the original, or the rebase process will fail. Neither is desirable. So work around this issue by replacing the echo statements used to print out portions of the commit message, with printf. Also, add a test to test for this breakage. Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Acked-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nathan W. Panike 提交于
On some systems, the chrome browser is named google-chrome. We add support for this case. Signed-off-by: NNathan W. Panike <nathan.panike@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint-1.7.1: request-pull.txt: Document -p option Check size of path buffer before writing into it
-
由 Junio C Hamano 提交于
* maint-1.7.0: request-pull.txt: Document -p option Check size of path buffer before writing into it
-
由 Junio C Hamano 提交于
* maint-1.6.6: request-pull.txt: Document -p option Check size of path buffer before writing into it rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
-
由 Junio C Hamano 提交于
* maint-1.6.5: request-pull.txt: Document -p option Check size of path buffer before writing into it rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
-
由 Stephen Boyd 提交于
Signed-off-by: NStephen Boyd <bebarino@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint-1.6.4: Check size of path buffer before writing into it rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
-
由 Greg Brockman 提交于
This prevents a buffer overrun that could otherwise be triggered by creating a file called '.git' with contents gitdir: (something really long) Signed-off-by: NGreg Brockman <gdb@mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 24 7月, 2010 3 次提交
-
-
由 Dan McGee 提交于
On Arch Linux, the executable for the Apache HTTP server keeps the 'httpd' name and is not named 'apache2'. The path to the server modules also contains 'httpd' rather than 'apache2'. Remove some of these assumptions and add the httpd name in where it may be required. Finally, make some slight style adjustments to the code we are touching to make it fit the style of the rest of the script. Signed-off-by: NDan McGee <dpmcgee@gmail.com> Acked-by: NEric Wong <normalperson@yhbt.net>
-
由 Dan McGee 提交于
We were passing the non-existent GIT_EXEC_DIR through instead of the real GIT_EXEC_PATH. In addition, these weren't being passed at all for CGI (non mod_perl) execution so get them included there as well. Signed-off-by: NDan McGee <dpmcgee@gmail.com> Acked-by: NEric Wong <normalperson@yhbt.net>
-
由 Dan McGee 提交于
'CustomLog' is provided by mod_log_config so we need to include the module in our generated config. This was added in d94775e1. Signed-off-by: NDan McGee <dpmcgee@gmail.com> Acked-by: NEric Wong <normalperson@yhbt.net>
-
- 22 7月, 2010 4 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
These two tests weren't about how "git reflog show <branch>" exits when there is no reflog, but were about "checkout" and "branch" create or not create reflog when creating a new <branch>. Update the tests to check what we are interested in, using "git rev-parse --verify". Also lose tests based on "test -f .git/logs/refs/heads/<branch>" from nearby, to avoid exposing this particular implementation detail unnecessarily. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
See e2007832Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
The correct advice should have been taken from c289c315 (t/t7006: ignore return status of shell's unset builtin, 2010-06-02). A real-life issue we experienced was with "unset", not with "export" (exporting an unset variable may have similar portability issues, though). Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 21 7月, 2010 1 次提交
-
-
由 Brandon Casey 提交于
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man page describe it as follows: !(pattern-list) Matches anything except one of the given patterns. Ksh performs a file glob using the pattern-list and then tries to execute the first file in the list. If a space is added between the '!' and the open parens, then Ksh will not interpret it as a pattern list, but in this case, it is preferred to use test_must_fail, so lets do so. Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-