- 14 4月, 2017 3 次提交
-
-
由 Nguyễn Thái Ngọc Duy 提交于
This is not meant to cover all existing API. It adds enough to test ref stores with the new test program test-ref-store, coming soon and to be used by files-backend.c. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
This function is intended to replace *_submodule() refs API. It provides a ref store for a specific submodule, which can be operated on by a new set of refs API. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
files-backend.c is unlearning submodules. Instead of having a specific check for submodules to see what operation is allowed, files backend now takes a set of flags at init. Each operation will check if the required flags is present before performing. For now we have four flags: read, write and odb access. Main ref store has all flags, obviously, while submodule stores are read-only and have access to odb (*). The "main" flag stays because many functions in the backend calls frontend ones without a ref store, so these functions always target the main ref store. Ideally the flag should be gone after ref-store-aware api is in place and used by backends. (*) Submodule code needs for_each_ref. Try take REF_STORE_ODB flag out. At least t3404 would fail. The "have access to odb" in submodule is a bit hacky since we don't know from he whether add_submodule_odb() has been called. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 28 3月, 2017 17 次提交
-
-
由 Nguyễn Thái Ngọc Duy 提交于
files-backend is now initialized with a $GIT_DIR. Converting a submodule path to where real submodule gitdir is located is done in get_ref_store(). This gives a slight performance improvement for submodules since we don't convert submodule path to gitdir at every backend call like before. We pay that once at ref-store creation. More cleanup in files_downcast() and files_assert_main_repository() follows shortly. It's separate to keep noises from this patch. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
refs is learning to avoid path rewriting that is done by strbuf_git_path_submodule(). Factor out this code so it could be reused by refs_* functions. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
get_ref_store() will soon be renamed to get_submodule_ref_store(). Together with future get_worktree_ref_store(), the three functions provide an appropriate ref store for different operation modes. New APIs will be added to operate directly on ref stores. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
This is the last function in this code (besides public API) that takes submodule argument and handles both main/submodule cases. Break it down, move main store registration in get_main_ref_store() and keep the rest in register_submodule_ref_store(). Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
This helps the future changes in this code. And because get_ref_store() is destined to become get_submodule_ref_store(), the "get main store" code path will be removed eventually. After this the patch to delete that code will be cleaner. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
With get_main_ref_store() being used inside get_ref_store(), lookup_ref_store() is only used for submodule code path. Rename to reflect that and delete dead code. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Given $GIT_DIR and $GIT_COMMON_DIR, files-backend is now in charge of deciding what goes where (*). The end goal is to pass $GIT_DIR only. A refs "view" of a linked worktree is a logical ref store that combines two files backends together. (*) Not entirely true since strbuf_git_path_submodule() still does path translation underneath. But that's for another patch. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Keep repo-related path handling in one place. This will make it easier to add submodule/multiworktree support later. This automatically adds the "if submodule then use the submodule version of git_path" to other call sites too. But it does not mean those operations are submodule-ready. Not yet. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Keep repo-related path handling in one place. This will make it easier to add submodule/multiworktree support later. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
This makes reflog path building consistent, always in the form of strbuf_git_path(sb, "logs/%s", refname); It reduces the mental workload a bit in the next patch when that function call is converted. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
git_path() and friends are going to be killed in files-backend.c in near future. And because there's a risk with overwriting buffer in git_path(), let's convert them all to strbuf_git_path(). We'll have easier time killing/converting strbuf_git_path() then because we won't have to worry about memory management again. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
This is a no-op patch. It prepares the function so that we can release resources (to be added later in this function) before we return. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Keep repo-related path handling in one place. This will make it easier to add submodule/multiworktree support later. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
safe_create_dir() can do adjust_shared_perm() internally, and init-db has always created 'refs' in shared mode since the beginning, af6e277c (git-init-db: initialize shared repositories with --shared - 2005-12-22). So this code looks like extra adjust_shared_perm calls are unnecessary. And they are. But let's see why there are here in the first place. This code was added in 6fb5acfd (refs: add methods to init refs db - 2016-09-04). From the diff alone this looks like a faithful refactored code from init-db.c. But there is a subtle difference: Between the safe_create_dir() block and adjust_shared_perm() block in the old init-db.c, we may copy/recreate directories from the repo template. So it makes sense that adjust_shared_perm() is re-executed then to fix potential permission screwups. After 6fb5acfd, refs dirs are created after template is copied. Nobody will change directory permission again. So the extra adjust_shared_perm() is redudant. Delete them. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
It's not in the diff context, but files_downcast() is called before this check. If "refs" is NULL, we would have segfaulted before reaching the check here. And we should never see NULL refs in backend code (frontend should have caught it). Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Created in 5f3c3a4e (files_log_ref_write: new function - 2015-11-10) but probably never used outside refs-internal.c Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 19 3月, 2017 1 次提交
-
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 18 3月, 2017 14 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
"git revert -m 0 $merge_commit" complained that reverting a merge needs to say relative to which parent the reversion needs to happen, as if "-m 0" weren't given. The correct diagnosis is that "-m 0" does not refer to the first parent ("-m 1" does). This has been fixed. * jk/cherry-pick-0-mainline: cherry-pick: detect bogus arguments to --mainline
-
由 Junio C Hamano 提交于
The start-up sequence of "git" needs to figure out some configured settings before it finds and set itself up in the location of the repository and was quite messy due to its "chicken-and-egg" nature. The code has been restructured. * js/early-config: setup.c: mention unresolved problems t1309: document cases where we would want early config not to die() setup_git_directory_gently_1(): avoid die()ing t1309: test read_early_config() read_early_config(): really discover .git/ read_early_config(): avoid .git/config hack when unneeded setup: make read_early_config() reusable setup: introduce the discover_git_directory() function setup_git_directory_1(): avoid changing global state setup: prepare setup_discovered_git_dir() for the root directory setup_git_directory(): use is_dir_sep() helper t7006: replace dubious test
-
由 Junio C Hamano 提交于
Our source code has used the SHA1_HEADER cpp macro after "#include" in the C code to switch among the SHA-1 implementations. Instead, list the exact header file names and switch among implementations using "#ifdef BLK_SHA1/#include "block-sha1/sha1.h"/.../#endif"; this helps some IDE tools. * bc/sha1-header-selection-with-cpp-macros: hash.h: move SHA-1 implementation selection into a header file
-
由 Junio C Hamano 提交于
"git status --porcelain" is supposed to give a stable output, but a few strings were left as translatable by mistake. * mg/status-porcelain-no-i18n: git-status: make porcelain more robust
-
由 Junio C Hamano 提交于
"git add -p <pathspec>" unnecessarily expanded the pathspec to a list of individual files that matches the pathspec by running "git ls-files <pathspec>", before feeding it to "git diff-index" to see which paths have changes, because historically the pathspec language supported by "diff-index" was weaker. These days they are equivalent and there is no reason to internally expand it. This helps both performance and avoids command line argument limit on some platforms. * jk/add-i-use-pathspecs: add--interactive: do not expand pathspecs with ls-files
-
由 Junio C Hamano 提交于
"Dumb http" transport used to misparse a nonsense http-alternates response, which has been fixed. * jk/http-walker-buffer-underflow-fix: http-walker: fix buffer underflow processing remote alternates
-
由 Junio C Hamano 提交于
The pathspec mechanism learned to further limit the paths that match the pattern to those that have specified attributes attached via the gitattributes mechanism. * bw/attr-pathspec: pathspec: allow escaped query values pathspec: allow querying for attributes
-
由 Junio C Hamano 提交于
"git tag --contains" used to (ab)use the object bits to keep track of the state of object reachability without clearing them after use; this has been cleaned up and made to use the newer commit-slab facility. * jk/ref-filter-flags-cleanup: ref-filter: use separate cache for contains_tag_algo ref-filter: die on parse_commit errors ref-filter: use contains_result enum consistently ref-filter: move ref_cbdata definition into ref-filter.c
-
由 Junio C Hamano 提交于
From a working tree of a repository, a new option of "rev-parse" lets you ask if the repository is used as a submodule of another project, and where the root level of the working tree of that project (i.e. your superproject) is. * sb/rev-parse-show-superproject-root: rev-parse: add --show-superproject-working-tree
-
由 Junio C Hamano 提交于
"uchar [40]" to "struct object_id" conversion continues. * bc/object-id: wt-status: convert to struct object_id builtin/merge-base: convert to struct object_id Convert object iteration callbacks to struct object_id sha1_file: introduce an nth_packed_object_oid function refs: simplify parsing of reflog entries refs: convert each_reflog_ent_fn to struct object_id reflog-walk: convert struct reflog_info to struct object_id builtin/replace: convert to struct object_id Convert remaining callers of resolve_refdup to object_id builtin/merge: convert to struct object_id builtin/clone: convert to struct object_id builtin/branch: convert to struct object_id builtin/grep: convert to struct object_id builtin/fmt-merge-message: convert to struct object_id builtin/fast-export: convert to struct object_id builtin/describe: convert to struct object_id builtin/diff-tree: convert to struct object_id builtin/commit: convert to struct object_id hex: introduce parse_oid_hex
-
由 Junio C Hamano 提交于
Code clean-up. * rs/blame-code-cleanup: blame: move blame_entry duplication to add_blame_entry()
-
由 Junio C Hamano 提交于
Picking two versions of Git and running tests to make sure the older one and the newer one interoperate happily has now become possible. * jk/interop-test: t/interop: add test of old clients against modern git-daemon t: add an interoperability test harness
-
由 Junio C Hamano 提交于
The experimental "split index" feature has gained a few configuration variables to make it easier to use. * cc/split-index-config: (22 commits) Documentation/git-update-index: explain splitIndex.* Documentation/config: add splitIndex.sharedIndexExpire read-cache: use freshen_shared_index() in read_index_from() read-cache: refactor read_index_from() t1700: test shared index file expiration read-cache: unlink old sharedindex files config: add git_config_get_expiry() from gc.c read-cache: touch shared index files when used sha1_file: make check_and_freshen_file() non static Documentation/config: add splitIndex.maxPercentChange t1700: add tests for splitIndex.maxPercentChange read-cache: regenerate shared index if necessary config: add git_config_get_max_percent_split_change() Documentation/git-update-index: talk about core.splitIndex config var Documentation/config: add information for core.splitIndex t1700: add tests for core.splitIndex update-index: warn in case of split-index incoherency read-cache: add and then use tweak_split_index() split-index: add {add,remove}_split_index() functions config: add git_config_get_split_index() ...
-
- 17 3月, 2017 5 次提交
-
-
由 Junio C Hamano 提交于
* maint: Preparing for 2.12.1
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Git v2.12 was shipped with an embarrassing breakage where various operations that verify paths given from the user stopped dying when seeing an issue, and instead later triggering segfault. ... and then to down to 'maint'. * js/realpath-pathdup-fix: real_pathdup(): fix callsites that wanted it to die on error t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
-
由 Junio C Hamano 提交于
Code clean-up and a string truncation fix. * mm/two-more-xstrfmt: bisect_next_all: convert xsnprintf to xstrfmt stop_progress_msg: convert xsnprintf to xstrfmt
-
由 Junio C Hamano 提交于
The command-line parsing of "git log -L" copied internal data structures using incorrect size on ILP32 systems. * vn/line-log-memcpy-size-fix: line-log: use COPY_ARRAY to fix mis-sized memcpy
-