- 07 4月, 2007 3 次提交
-
-
由 Frank Lichtenheld 提交于
Actually tell the user what he did wrong in case of usage errors instead of only printing the general usage information. Signed-off-by: NFrank Lichtenheld <frank@lichtenheld.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Frank Lichtenheld 提交于
Document the fact that git-cvsimport tries to find out CVSROOT from CVS/Root and $ENV{CVSROOT} and CVS_module from CVS/Repository. Also use ` ` syntax for all filenames for consistency. Signed-off-by: NFrank Lichtenheld <frank@lichtenheld.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Frank Lichtenheld 提交于
Sync both the usage lines in the code and the asciidoc documentation with the real list of options. While all options seems to be documented in the asciidoc document, not all of them were listed in the usage line. Signed-off-by: NFrank Lichtenheld <frank@lichtenheld.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 06 4月, 2007 8 次提交
-
-
由 Dana How 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Shawn O. Pearce 提交于
If the user is trying to apply a Git generated diff file and they have specified a -p<n> option, where <n> is not 1, the user probably has a good reason for doing this. Such as they are me, trying to apply a patch generated in git.git for the git-gui subdirectory to the git-gui.git repository, where there is no git-gui subdirectory present. Users shouldn't supply -p2 unless they mean it. But if they are supplying it, they probably have thought about how to make this patch apply to their working directory, and want to risk whatever results may come from that. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Say $(wildcard ...) when we mean it. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Geert Bosch 提交于
Make git_config_rename_section return success if no config file exists. Otherwise, renaming a branch would abort, leaving the repository in an inconsistent state. [jc: test] Signed-off-by: NGeert Bosch <bosch@gnat.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Ville Skyttä 提交于
make install DESTDIR=... support for git/contrib/emacs Signed-off-by: NVille Skyttä <scop@xemacs.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
git_patchset_body needs patch generated with --full-index option to detect split patches, meaning two patches which corresponds to single difftree (raw diff) entry. An example of such situation is changing type (mode) of a file, e.g. from plain file to symbolic link. Add, in git_blobdiff, --full-index option to patch generating git diff invocation, for the 'html' format output ("blobdiff" view). "blobdiff_plain" still uses shortened sha1 in the extended git diff header "index <hash>..<hash>[ <mode>]" line. Noticed-by: NMartin Koegler <mkoegler@auto.tuwien.ac.at> Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Brian Gernhardt 提交于
Explanation is paraphrased from "577ed5c2... rev-list --left-right" Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 René Scharfe 提交于
Commit 64edf4b2 cleaned up the initialization of git-archive, at the cost of 'git-archive --list' now requiring a git repo. This patch reverts the cleanup and documents the requirement for this particular dirtyness in a test. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 05 4月, 2007 3 次提交
-
-
由 Gerrit Pape 提交于
$ git grep post-receieve-email $ git grep post-receive-email templates/hooks--post-receive:#. /usr/share/doc/git-core/contrib/hooks/post-receive-email $ Signed-off-by: NGerrit Pape <pape@smarden.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
The earlier code does not swap hunks when the beginning of the first side is identical to the whole of the second side. In such a case, the first one should sort later. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Brian Gernhardt 提交于
On OS X, wc outputs 6 spaces before the number of lines, so the test expecting the string "10" failed. Do not quote $cmd to strip away the problematic whitespace as other tests do. Also fix the grammar of the test name while making changes to it. There's only one preimage, so it's "has", not "have". Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 04 4月, 2007 6 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Not that this release really matters, as we will be doing 1.5.1 tomorrow. This commit is to tie the loose ends and merge all of "maint" branch into "master" in preparation. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Mainly consistent usage of "git command" and not "git-command" syntax Signed-off-by: NJakub Narebski <jnareb@gmail.com> Acked-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
-
由 Junio C Hamano 提交于
When a file has more then one conflicting hunks, it repeated the contents of previous hunks in output for later ones. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 03 4月, 2007 1 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 01 4月, 2007 3 次提交
-
-
由 Frank Lichtenheld 提交于
The git-cvsserver documentation claims that the server will set -k modes if appropriate which is not really the case. On the other hand the available gitcvs.allbinary variable is not documented at all. Fix both these issues by rewording the related paragraph. Signed-off-by: NFrank Lichtenheld <frank@lichtenheld.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Eric Wong 提交于
If we're on an invalid HEAD, we should detect this and avoid attempting to continue. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Alex Riesen 提交于
This patch leaves the base name in the resulting intermediate tree, to propagate the conflict from intermediate merges up to the top-level merge. Signed-off-by: NAlex Riesen <raa.lkml@gmail.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 31 3月, 2007 6 次提交
-
-
由 Julian Phillips 提交于
Add a simple script to create a working directory that uses symlinks to point at an exisiting repository. This allows having different branches in different working directories but all from the same repository. Based on a description from Junio of how he creates multiple working directories[1]. With the following caveat: "This risks confusion for an uninitiated if you update a ref that is checked out in another working tree, but modulo that caveat it works reasonably well." [1] http://article.gmane.org/gmane.comp.version-control.git/41513/Signed-off-by: NJulian Phillips <julian@quantumfyre.co.uk> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Andy Parkins 提交于
The update hook is no longer the correct place to generate emails; there is now the hooks/post-receive script which is run automatically after a ref has been updated. This patch is to make use of that new location, and to address some faults in the old update hook. The primary problem in the conversion was that in the update hook, the ref has not actually been changed, but is about to be. In the post-receive hook the ref has already been updated. That meant that where we previously had lines like: git rev-list --not --all would now give the wrong list because "--all" in the post-receive hook includes the ref that we are making the email for. This made it more difficult to show only the new revisions added by this update. The solution is not pretty; however it does work and doesn't need any changes to git-rev-list itself. It also fixes (more accurately: reduces the likelihood of) a nasty race when another update occurs while this script is running. The solution, in short, looks like this (see the source code for a longer explanation) git rev-parse --not --all | grep -v $(git rev-parse $refname) | git rev-list --pretty --stdin $oldrev..$newrev This uses git-rev-parse followed by grep to filter out the revision of the ref in question before it gets to rev-list and inhibits the output of itself. By using $(git rev-parse $revname) rather than $newrev as the filter, it also takes care of the situation where another update to the same ref has been made since $refname was $newrev. The second problem that is addressed is that of tags inhibiting the correct output of an update email. Consider this, with somebranch and sometag pointing at the same revision: git push origin somebranch git push origin sometag That would work fine; the push of the branch would generate an email containing all the new commits introduced by the update, then the push of the tag would generate the shortlog formatted tag email. Now consider: git push origin sometag git push origin somebranch When some branch comes to run its "--not --all" line, it will find sometag, and filter those commits from the email - leaving nothing. That meant that those commits would not show (in full) on any email. The fix is to not use "--all", and instead use "--branches" in the git-rev-parse command. Other changes * Lose the monstrous one-giant-script layout and put things in easy to digest functions. This makes it much easier to find the place you need to change if you wanted to customise the output. I've also tried to write more verbose comments for the same reason. The hook script is big, mainly because of all the different cases that it has to handle, so being easy to navigate is important. * All uses of "git-command" changed to "git command", to cope better if a user decided not to install all the hard links to git; * Cleaned up some of the English in the email * The fact that the receive hook makes the ref available also allows me to use Shawn Pearce's fantastic suggestion that an annotated tag can be parsed with git-for-each-ref. This removes the potentially non-portable use of "<<<" heredocs and the nasty messing around with "date" to convert numbers of seconds UTC to a real date * Deletions are now caught and notified (briefly) * To help with debugging, I've retained the command line mode from the update hook; but made it so that the output is not emailed, it's just printed to the screen. This could then be redirected if the user wanted * Removed the "Hello" from the beginning of the email - it's just noise, and no one seriously has their day made happier by "friendly" programs * The fact that it doesn't rely on repository state as an indicator any more means that it's far more stable in its output; hopefully the same arguments will always generate the same email - even if the repository changes in the future. This means you can easily recreate an email should you want to. * Included Jim Meyering's envelope sender option for the sendmail call * The hook is now so big that it was inappropriate to copy it to every repository by keeping it in the templates directory. Instead, I've put a comment saying to look in contrib/hooks, and given an example of calling the script from that template hook. The advantage of calling the script residing at some fixed location is that if a future package of git included a bug fixed version of the script, that would be picked up automatically, and the user would not have to notice and manually copy the new hook to every repository that uses it. Signed-off-by: NAndy Parkins <andyparkins@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Eric Wong 提交于
We ignore errors if the path we're tracking did not exist for a particular revision range, but we still print out warnings telling the user about that. As pointed out by Seth Falcon, this amounts to a lot of warnings that could confuse and worry users. I'm not entirely comfortable completely silencing the warnings, but showing one warning per path that we track should be reasonable. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Theodore Ts'o 提交于
This fixes a problem reported by Randal Schwartz: >I finally tracked down all the (albeit inconsequential) errors I was getting >on both OpenBSD and OSX. It's the warn() function in usage.c. There's >warn(3) in BSD-style distros. It'd take a "great rename" to change it, but if >someone with better C skills than I have could do that, my linker and I would >appreciate it. It was annoying to me, too, when I was doing some mergetool testing on Mac OS X, so here's a fix. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: "Randal L. Schwartz" <merlyn@stonehenge.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Don Zickus 提交于
Don't translate the patch to UTF-8, instead preserve the data as is. This also reverts a test case that was included in the original patch series. Also allow overwriting the authorship and title information we gather from RFC2822 mail headers with additional in-body headers, which was pointed out by Linus. Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Fix the bug that caused "blobdiff" view called with new style URI for a rename with change diff to be show as new (added) file diff. New style URI for "blobdiff" for rename means with $hash_base ('hb') and $hash_parent_base ('hpb') paramaters denoting tree-ish (usually commit) of a blobs being compared, together with both $file_name ('f') and $file_parent ('fp') parameters. It is done by adding $file_parent ('fp') to the path limiter, meaning that diff command becomes: git diff-tree [options] hpb hb -- fp f Other option would be finding hash of a blob using git_get_hash_by_path subroutine and comparing blobs using git-diff, or using extended SHA-1 syntax and compare blobs using git-diff: git diff [options] hpb:fp hp:f Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 30 3月, 2007 10 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
* maint: git-upload-pack: make sure we close unused pipe ends Documentation/git-rev-parse.txt: fix example in SPECIFYING RANGES. Documentation/git-svnimport.txt: fix typo.
-
由 Francis Daly 提交于
Bryan Wu reported /usr/local/bin/git-quiltimport: 114: Syntax error: Missing '))' Most bourne-ish shells I have here accept x=$((echo x)|cat) but all bourne-ish shells I have here accept x=$( (echo x)|cat) because $(( might mean arithmetic expansion. Signed-off-by: NFrancis Daly <francis@daoine.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Christian Couder 提交于
So we can remove the specific message in "bisect_run". Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
git://repo.or.cz/git/mergetool.git由 Junio C Hamano 提交于
* 'master' of git://repo.or.cz/git/mergetool.git: mergetool: Clean up description of files and prompts for merge resolutions mergetool: Make git-rm quiet when resolving a deleted file conflict mergetool: Add support for Apple Mac OS X's opendiff command mergetool: Fix abort command when resolving symlinks and deleted files mergetool: Remove spurious error message if merge.tool config option not set mergetool: factor out common code mergetool: portability fix: don't use reserved word function mergetool: portability fix: don't assume true is in /bin mergetool: Don't error out in the merge case where the local file is deleted mergetool: Replace use of "echo -n" with printf(1) to be more portable Fix minor formatting issue in man page for git-mergetool
-
由 Theodore Ts'o 提交于
This fixes complaints from Junio for how messages and prompts are printed when resolving symlink and deleted file merges. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Signed-off-by: NArjen Laarhoven <arjen@yaph.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-