- 18 6月, 2006 8 次提交
-
-
由 Junio C Hamano 提交于
* jc/rw-prefix: read-tree: reorganize bind_merge code. write-tree: --prefix=<path> read-tree: --prefix=<path>/ option.
-
由 Junio C Hamano 提交于
* pe/date: date.c: improve guess between timezone offset and year.
-
由 Junio C Hamano 提交于
[jc: this is based on Eric's patch but also fixes up the parsed subject headers]. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Eric W. Biederman 提交于
It was pointed out that the current behaviour might mispart a patch comment so remove this behaviour for now. [jc: this fixes "From: line in the middle" check in t5100 test.] Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Currently the test passes with 1.3.3 but not with the tip of "master". This is to verify the fixes from Eric W Biedermann. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Dennis Stosberg 提交于
Some versions of "diff" (e.g. on FreeBSD and older Linux systems) do not support the "\ No newline at end of file" remark and are not able to generate the patches needed for this test. This lets the test fail, although git-apply is working perfectly. This patch adds the pre-generated patches to t/t4100/ and makes the test use them. Signed-off-by: NDennis Stosberg <dennis@stosberg.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Sven Verdoolaege 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 17 6月, 2006 11 次提交
-
-
由 Linus Torvalds 提交于
This does: - add a "rev.simplify_history" flag which defaults to on - it turns it off for "git whatchanged" (which thus now has real semantics outside of "git log") - it adds a command line flag ("--full-history") to turn it off for others (ie you can make "git log" and "gitk" etc get the semantics if you want to. Now, just as an example of _why_ you really really really want to simplify history by default, apply this patch, install it, and try these two command lines: gitk --full-history -- git.c gitk -- git.c and compare the output. So with this, you can also now do git whatchanged -p -- gitweb.cgi git log -p --full-history -- gitweb.cgi and it will show the old history of gitweb.cgi, even though it's not relevant to the _current_ state of the name "gitweb.cgi" NOTE NOTE NOTE! It will still actually simplify away merges that didn't change anything at all into either child. That creates these bogus strange discontinuities if you look at it with "gitk" (look at the --full-history gitk output for git.c, and you'll see a few strange cases). So the whole "--parent" thing ends up somewhat bogus with --full-history because of this, but I'm not sure it's worth even worrying about. I don't think you'd ever want to really use "--full-history" with the graphical representation, I just give it as an example exactly to show _why_ doing so would be insane. I think this is trivial enough and useful enough to be worth merging into the stable branch. Signed-off-by: NLinus Torvalds <torvalds@osdl.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Peter Eriksen 提交于
Signed-off-by: NPeter Eriksen <s022018@student.dtu.dk> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Florian Forster 提交于
Since `git-annotate' is an expensive operation to run it may be desirable to deactivate this functionality. This patch introduces the `gitweb.blame' option to git-repo-config and disables the blame support by default. Signed-off-by: NFlorian Forster <octo@verplant.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Florian Forster 提交于
This patch adds an interface for `git-blame' to `gitweb.cgi'. Links to it are placed in `git_blob'. Internally the code uses `git-annotate' because `git-blame's output differs for files that have been renamed in the past. However, I like the term `blame' better. [jc: blame can be told to produce the compatible format btw...] Signed-off-by: NFlorian Forster <octo@verplant.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Martin Langhoff 提交于
With this patch we have a speedup and much lower IO when importing trees with many branches. Instead of forcing index re-population for each branch switch, we keep many index files around, one per branch. Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Martin Langhoff 提交于
We now capture the output of cvsps to a tempfile, and then read it in. cvsps 2.1 works quite a bit "in memory", and only prints its patchset info once it has finished talking with cvs, but apparently retaining all that memory allocation. With this patch, cvsps is finished and reaped before cvsimport start working (and growing). So the footprint of the whole process is much lower. Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Martin Langhoff 提交于
cvsps output often contains references to CVSPS_NO_BRANCH, commits that it could not trace to a branch. Ignore that branch. Additionally, cvsps will sometimes draw circular relationships between branches -- where two branches are recorded as opening from the other. In those cases, and where the ancestor branch hasn't been seen, ignore it. Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Fredrik Kuivinen 提交于
fix the usage string and clean up the docs while we are at it Signed-off-by: NFredrik Kuivinen <freku045@student.liu.se> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
When extra command line arguments are given to a command that was alias-expanded, the code generated a wrong argument list, leaving the original alias in the result, and forgetting to terminate the new argv list. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Sean 提交于
P4import currently creates a git tag for every commit it imports. When importing from a large repository too many tags can be created for git to manage, so this provides an option to shut that feature off if necessary. Signed-off-by: NSean Estabrooks <seanlkml@sympatico.ca>
-
git://git.bogomips.org/git-svn由 Junio C Hamano 提交于
* git://git.bogomips.org/git-svn: (25 commits) git-svn: rebuild convenience and bugfixes git-svn: svn (command-line) 1.0.x compatibility git-svn: tests no longer fail if LC_ALL is not a UTF-8 locale git-svn: bugfix and optimize the 'log' command git-svn: Eliminate temp file usage in libsvn_get_file() git-svn: fix several small bugs, enable branch optimization git-svn: avoid creating some small files git-svn: make the $GIT_DIR/svn/*/revs directory obsolete git-svn: add support for Perl SVN::* libraries git-svn: add 'log' command, a facsimile of basic `svn log' git-svn: add UTF-8 message test git-svn: add some functionality to better support branches in svn git-svn: add --shared and --template= options to pass to init-db git-svn: add --repack and --repack-flags= options git-svn: minor cleanups, extra error-checking git-svn: Move all git-svn-related paths into $GIT_DIR/svn git-svn: support manually placed initial trees from fetch git-svn: optimize --branch and --branch-all-ref git-svn: --branch-all-refs / -B support git-svn: support -C<num> passing to git-diff-tree ...
-
- 16 6月, 2006 21 次提交
-
-
由 Eric Wong 提交于
We will now automatically fetch the refs/remotes/git-svn ref from origin and store a Pull: line for it. --remote=<origin> may be passed if your remote is named something other than 'origin' Also, remember to make GIT_SVN_DIR whenever we need to create .rev_db Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
Tested on a plain Ubuntu Warty installation using subversion 1.0.6-1.2ubuntu3 svn add --force was never needed, as it only affected directories, which git (thankfully) doesn't track The 1.0.x also didn't support symlinks(!), so allow NO_SYMLINK to be defined for running tests Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
Revisions with long commit messages were being skipped, since the 'git-svn-id' metadata line was at the end and git-log uses a 32k buffer to print the commits. Also the last 'git-svn-id' metadata line in a commit is always the valid one, so make sure we use that, as well. Made the verbose flag work by passing the correct option switch ('--summary') to git-log. Finally, optimize -r/--revision argument handling by passing the appropriate limits to revision Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
This means we'll have a loose object when we encounter a symlink but that's not the common case. We also don't have to worry about svn:eol-style when using the SVN libraries, either. So remove the code to deal with that. Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
Share the repack counter between branches when doing multi-fetch. Pass the -d flag to git repack by default. That's the main reason we will want automatic pack generation, to save space and improve disk cache performance. I won't add -a by default since it can generate extremely large packs that make RAM-starved systems unhappy. We no longer generate the .git/svn/$GIT_SVN_ID/info/uuid file, either. It was never read in the first place. Check for and create .rev_db if we need to during fetch (in case somebody manually blew away their .rev_db and wanted to start over. Mainly makes debugging easier). Croak with $? instead of $! if there's an error closing pipes Quiet down some of the chatter, too. Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
repo_path_split() is already pretty fast, and is already optimized via caching. We also don't need to create an exclude file if we're relying on the SVN libraries. Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
This is a very intrusive change, so I've beefed up the tests significantly. Added 'full-test' a target to the Makefile, to test different possible configurations. This is intended for maintainers only. Users should only be concerned with 'test' succeeding. We now have a very simple custom database format for handling mapping of svn revisions => git commits. Of course, we're not really using it yet, either. Also disabled automatic branch-finding on new trees for now. It's too easily broken. revisions_eq() function should be helpful for branch detection. Also removed an extra assertion in fetch_cmd() that wasn't correctly done. This bug was found by full-test. Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
This means we no longer have to deal with having bloated SVN working copies around and we get a nice performance increase as well because we don't have to exec the SVN binary and start a new server connection each time. Of course we have to manually manage memory with SVN::Pool whenever we can, and hack around cases where SVN just eats memory despite pools (I blame Perl, too). I would like to keep memory usage as stable as possible during long fetch/commit processes since I still use computers with only 256-512M RAM. commit should always be faster with the SVN library code. The SVN::Delta interface is leaky (or I'm not using it with pools correctly), so I'm forking on every commit, but that doesn't seem to hurt performance too much (at least on normal Unix/Linux systems where fork() is pretty cheap). fetch should be faster in most common cases, but probably not all. fetches will be faster where client/server delta generation is the bottleneck and not bandwidth. Of course, full-files are generated server-side via deltas, too. Full files are always transferred when they're updated, just like git-svnimport and unlike command-line svn. I'm also hacking around memory leaks (see comments) here by using some more forks. I've tested fetch with http://, https://, file://, and svn:// repositories, so we should be reasonably covered in terms of error handling for fetching. Of course, we'll keep plain command-line svn compatibility as a fallback for people running SVN 1.1 (I'm looking into library support for 1.1.x SVN, too). If you want to force command-line SVN usage, set GIT_SVN_NO_LIB=1 in your environment. We also require two simultaneous connections (just like git-svnimport), but this shouldn't be a problem for most servers. Less important commands: show-ignore is slower because it requires repository access, but -r/--revision <num> can be specified. graft-branches may use more memory, but it's a short-term process and is funky-filename-safe. Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
This quick feature should make it easy to look up svn log messages when svn users refer to -r/--revision numbers. The following features from `svn log' are supported: --revision=<n>[:<n>] - is supported, non-numeric args are not: HEAD, NEXT, BASE, PREV, etc ... -v/--verbose - just maps to --raw (in git log), so it's completely incompatible with the --verbose output in svn log --limit=<n> - is NOT the same as --max-count, doesn't count merged/excluded commits --incremental - supported (trivial :P) New features: --show-commit - shows the git commit sha1, as well --oneline - our version of --pretty=oneline Any other arguments are passed directly to `git log' Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
New commands: graft-branches - The most interesting command of the bunch. It detects branches in SVN via various techniques (currently regexes and file copies). It can be later extended to handle svk and other properties people may use to track merges in svk. Basically, merge tracking is not standardized at all in the SVN world, and git grafts are perfect for dealing with this situation. Existing branch support (via tree matches) is only handled at fetch time. The following tow were originally implemented as shell scripts several months ago, but I just decided to streamline things a bit and added them to the main script. multi-init - supports git-svnimport-like command-line syntax for importing repositories that are layed out as recommended by the SVN folks. This is a bit more tolerant than the git-svnimport command-line syntax and doesn't require the user to figure out where the repository URL ends and where the repository path begins. multi-fetch - runs fetch on all known SVN branches we're tracking. This will NOT discover new branches (unlike git-svnimport), so multi-init will need to be re-run (it's idempotent). Consider these three to be auxilliary commands (like show-ignore, and rebuild) so their behavior won't receive as much testing or scrutiny as the core commands (fetch and commit). Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
This should help keep disk usage sane for large imports. --repack takes an optional argument for the interval, it defaults to 1000 if no argument is specified. Arguments to --repack-flags are passed directly to git-repack. No arguments are passed by default. Idea stolen from git-cvsimport :) Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
While we're at it, read_repo_config has been added and expanded to handle case where command-line arguments are optional to Getopt::Long Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
Since GIT_SVN_ID usage is probably going to become more widespread <evil grin>, we won't run the chance of somebody having a GIT_SVN_ID name that conflicts with one of the default directories that already exist in $GIT_DIR (branches/tags). Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
Sometimes I don't feel like downloading an entire tree again when I actually decide a branch is worth tracking, so some users can get around it more easily with this. Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
By breaking the pipe read once we've seen a commit twice. This should make -B/--branch-all-ref faster and usable on a frequent basis. We use topological order now for calling git-rev-list, and any commit we've seen before should imply that all parents have been seen (at least I hope that's the case for --topo-order). Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
This should make life easier for all those who type: `git-rev-parse --symbolic --all | xargs -n1 echo -b` every time they run git-svn fetch. Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
The repo-config key is 'svn.copysimilarity' Signed-off-by: NEric Wong <normalperson@yhbt.net>
-
由 Eric Wong 提交于
If new revisions are fetched, that implies we haven't merged, acked, or nacked them yet, and attempting to write the tree we're committing means we'd silently clobber the newly fetched changes. Signed-off-by: NEric Wong <normalperson@yhbt.net>
-