- 04 9月, 2006 1 次提交
-
-
由 Junio C Hamano 提交于
When revalidating an entry from an existing pack entry->size and entry->type are not necessarily the size of the final object when the entry is deltified, but for base objects they must match. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 03 9月, 2006 2 次提交
-
-
由 Junio C Hamano 提交于
When reusing data from an existing pack and from a new style loose objects, we used to just copy it staight into the resulting pack. Instead make sure they are not corrupt, but do so only when we are not streaming to stdout, in which case the receiving end will do the validation either by unpacking the stream or by constructing the .idx file. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Christian Couder 提交于
If GIT_TRACE is set to an absolute path (starting with a '/' character), we interpret this as a file path and we trace into it. Also if GIT_TRACE is set to an integer value greater than 1 and lower than 10, we interpret this as an open fd value and we trace into it. Note that this behavior is not compatible with the previous one. We also trace whole messages using one write(2) call to make sure messages from processes do net get mixed up in the middle. This patch makes it possible to get trace information when running "make test". Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 02 9月, 2006 3 次提交
-
-
由 Shawn Pearce 提交于
Like xmalloc and xrealloc xstrdup dies with a useful message if the native strdup() implementation returns NULL rather than a valid pointer. I just tried to use xstrdup in new code and found it to be missing. However I expected it to be present as xmalloc and xrealloc are already commonly used throughout the code. [jc: removed the part that deals with last_XXX, which I am finding more and more dubious these days.] Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Also while we are at it, remove redundant typename[] array from unpack_sha1_header. The only reason it is different from the type_names[] array in object.c module is that this code cares about the subset of object types that are valid in a loose object, so prepare a separate array of boolean that tells us which types are valid, and share the name translation with the others. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Sergey Vlasov 提交于
The rule for howto/*.html used "$?", which expands to the list of all newer prerequisites, including asciidoc.conf added by another rule. "$<" should be used instead. Signed-off-by: NSergey Vlasov <vsu@altlinux.ru> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 01 9月, 2006 15 次提交
-
-
由 Johannes Schindelin 提交于
Thanks to the recent malloc()->xmalloc() change, and XMALLOC_POISON, this bug was found. Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jonas Fonseca 提交于
Signed-off-by: NJonas Fonseca <fonseca@diku.dk> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
git://git.kernel.org/pub/scm/gitk/gitk由 Junio C Hamano 提交于
* git://git.kernel.org/pub/scm/gitk/gitk: gitk: Fix some bugs in the new cherry-picking code gitk: Improve responsiveness while reading and layout out the graph gitk: Update preceding/following tag info when creating a tag gitk: Add a menu item for cherry-picking commits gitk: Fix a couple of buglets in the branch head menu items gitk: Add a context menu for heads gitk: Add a row context-menu item for creating a new branch gitk: Recompute ancestor/descendent heads/tags when rereading refs gitk: Minor cleanups
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Aneesh Kumar K.V 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jonas Fonseca 提交于
... to install documentation relative to the path set with configure's --prefix option. Signed-off-by: NJonas Fonseca <fonseca@diku.dk> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jonas Fonseca 提交于
Signed-off-by: NJonas Fonseca <fonseca@diku.dk> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jonas Fonseca 提交于
Signed-off-by: NJonas Fonseca <fonseca@diku.dk> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
The intention of the test seems to be to build a long chain of clones that locally borrow objects from their parents and see the system give up dereferencing long chains. There were two problems: (1) it did not test the right repository; (2) it did not build a chain long enough to trigger the limitation. I do not think it is a good test to make sure the limitation the current implementation happens to have still exists, but that is a topic at a totally different level. At least this fixes the broken test. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
-
由 Jakub Narebski 提交于
Extend parse_difftree_raw_line to save commit info from when git-diff-tree is given only one <tree-ish>, for example when fed from git-rev-list using --stdin option. git-diff-tree outputs a line with the commit ID when applicable. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
This is preparation for "tree blame" (similar to what ViewVC shows) output, i.e. for each entry give commit where it was changed. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Add new subroutine parse_ls_tree_line and use it in git_tree. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Dennis Stosberg 提交于
When run under mod_perl, require() will read and execute the configuration file on the first invocation only. On every subsequent invocation, all configuration variables will be reset to their default values. do() reads and executes the configuration file unconditionally. Signed-off-by: NDennis Stosberg <dennis@stosberg.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Dennis Stosberg 提交于
On Aug 27th, Jakub Narebski sent a patch which removed the git_to_hash() function and this call to it. The patch did not apply cleanly and had to be applied manually. Removing the last chunk has obviously been forgotten. See: commit 0aea3376 and message <200608272345.26722.jnareb@gmail.com> Signed-off-by: NDennis Stosberg <dennis@stosberg.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 30 8月, 2006 5 次提交
-
-
由 Franck Bui-Huu 提交于
This patch clean up append_signoff() by moving specific code that looks up for "^[-A-Za-z]+: [^@]+@" pattern into a function. It also stops the primary search when the cursor oversteps 'buf + at' limit. This patch changes slightly append_signoff() behaviour too. If we detect any Signed-off-by pattern during the primary search, we needn't to do a pattern research after. Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Johannes Schindelin 提交于
Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Johannes Schindelin 提交于
We checked NO_SETENV instead of NO_UNSETENV to decide if unsetenv is available. Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Johannes Schindelin 提交于
Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Linus Torvalds 提交于
The comment added says it all: if we have lost all references in a git archive, git-fsck-objects should still work, so instead of dying it should just notify the user about that condition. This change was triggered by me just doing a "git-init-db" and then populating that empty git archive with a pack/index file to look at it. Having git-fsck-objects not work just because I didn't have any references handy was rather irritating, since part of the reason for running git-fsck-objects in the first place was to _find_ the missing references. However, "--unreachable" really doesn't make sense in that situation, and we want to turn it off to protect anybody who uses the old "git prune" shell-script (rather than the modern built-in). The old pruning script used to remove all objects that were reported as unreachable, and without any refs, that obviously means everything - not worth it. Signed-off-by: NLinus Torvalds <torvalds@osdl.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 29 8月, 2006 10 次提交
-
-
由 Matthias Kestenholz 提交于
This fixes the following warning: git-repack: line 42: cd: .git/objects/pack: No such file or directory This happens only, when git-repack -a is run without any packs in the repository. Signed-off-by: NMatthias Kestenholz <matthias@spinlock.ch> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Add local time (hours and minutes) and local timezone to the output of git_print_authorship command, used by git_commitdiff. The code was taken from git_commit subroutine. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Added/uncommented git_difftree_body invocation in git_commitdiff. Added anchors (via 'id' attribute) to patches in patchset. git_difftree_body is modified to link to patch anchor when called from git_commitdiff, instead of link to blobdiff. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
This correct minor error in git_print_log that didn't add final empty line when requested, if commit log ended with signoff. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Add subroutine git_print_authorship to print author and date of commit, div.author_date style to CSS, and use them in git_commitdiff. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Remove '-remove_signoff => 1' option to git_print_log call in the git_print_simplified_log subroutine. This means that in "log" and "commitdiff" views (git_log and git_commitdiff subroutines) signoff lines will be shown. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Collapse git_print_log and git_print_simplified_log into one subroutine git_print_log. git_print_simplified_log now simply calls git_print_log with proper options. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Dennis Stosberg 提交于
This makes it possible to run gitweb under mod_perl's Apache::Registry. It needs a fairly new git version, with --git-dir=<path> parameter to git wrapper, i.e. post v1.4.2-rc2-g6acbcb92 version. Signed-off-by: NDennis Stosberg <dennis@stosberg.net> Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jonas Fonseca 提交于
Exposes the infrastructure from 9a8e35e9. Signed-off-by: NJonas Fonseca <fonseca@diku.dk> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
* gl/web: (46 commits) gitweb: Use @diff_opts, default ('M'), as git-diff and git-diff-tree paramete gitweb: Remove git_to_hash function gitweb: Remove unused git_get_{preceding,following}_references gitweb: Fix typo in git_patchset_body gitweb: Fix typo in git_difftree_body gitweb: blobs defined by non-textual hash ids can be cached gitweb: Improve comments about gitweb features configuration gitweb: Remove workaround for git-diff bug fixed in f82cd3c6 gitweb: Remove creating directory for temporary files gitweb: Remove git_diff_print subroutine gitweb: git_blobdiff_plain is git_blobdiff('plain') gitweb: Use git-diff-tree or git-diff patch output for blobdiff gitweb: Change here-doc back for style consistency in git_blobdiff gitweb: Always display link to blobdiff_plain in git_blobdiff gitweb: Add invisible hyperlink to from-file/to-file diff header gitweb: Parse two-line from-file/to-file diff header in git_patchset_body gitweb: Allow for pre-parsed difftree info in git_patchset_body gitweb: Add support for hash_parent_base parameter for blobdiffs gitweb: Use git_get_name_rev_tags for commitdiff_plain X-Git-Tag: header gitweb: Add git_get_rev_name_tags function ...
-
- 28 8月, 2006 4 次提交
-
-
由 Paul Mackerras 提交于
When inserting the new commit row for the cherry-picked commit, we weren't advancing the selected line (if there is one), and we weren't updating commitlisted properly.
-
由 Junio C Hamano 提交于
This adds an infrastructure to selectively enable and disable more than one services in git-daemon. Currently upload-pack service, which serves the git-fetch-pack and git-peek-remote clients, is the only service that is defined. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Rene Scharfe 提交于
Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Jonas noticed some places say "if (X) free(X)" which is totally unnecessary. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-