If locks are not cleaned up the repository is inaccessible for 10 minutes.
Signed-off-by: NClemens Buchacher <drizzd@aon.at>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

This did not cause any problems, because remove_lock_file_on_signal is
only registered for SIGINT.
Signed-off-by: NClemens Buchacher <drizzd@aon.at>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NPaul Oliver <puzza007@gmail.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

This patch renames the following documents and at the same time converts
them to the man page format:

cvs-migration.txt -> gitcvs-migration.txt
tutorial.txt      -> gittutorial.txt
tutorial-2.txt    -> gittutorial-2.txt

These new man pages are put in section 7, and other documents that reference
the above ones are change accordingly.

[jc: with help from Nanako to clean things up]
Signed-off-by: NChristian Couder <chriscool@tuxfamily.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NHeikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

* git://git.kernel.org/pub/scm/gitk/gitk:
  gitk: Fix bug introduced by "gitk: Fix "wrong # coordinates" error on reload"
  gitk: Fix bug where current row number display stops working
  gitk: Move es.po where it belongs
  gitk: Fix "wrong # coordinates" error on reload

* pb/push:
  add special "matching refs" refspec

* bc/repack:
  Documentation/git-repack.txt: document new -A behaviour
  let pack-objects do the writing of unreachable objects as loose objects
  add a force_object_loose() function
  builtin-gc.c: deprecate --prune, it now really has no effect
  git-gc: always use -A when manually repacking
  repack: modify behavior of -A option to leave unreferenced objects unpacked

Conflicts:

	builtin-pack-objects.c

* sp/ignorecase:
  t0050: Fix merge test on case sensitive file systems
  t0050: Add test for case insensitive add
  t0050: Set core.ignorecase case to activate case insensitivity
  t0050: Test autodetect core.ignorecase
  git-init: autodetect core.ignorecase

* maint:
  rev-parse --symbolic-full-name: don't print '^' if SHA1 is not a ref
  Add missing "short" alternative to --date in rev-list-options.txt
  git-show.txt: Not very stubby these days.
  Clarify repack -n documentation

log.date config variable sets the default date-time mode for the log
command. Setting log.date value is similar to using git log's --date
option.
Signed-off-by: NHeikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

* maint-1.5.4:
  rev-parse --symbolic-full-name: don't print '^' if SHA1 is not a ref

The intention of --symbolic-full-name is to not print anything if a
revision is not an exact ref. But this command:

    $ git-rev-parse --symbolic-full-name --not master~1

still emitted a sole '^' to stdout (provided that there's no other ref at
master~1). This fixes it.
Signed-off-by: NJohannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

This provides additional warning to users when attempting to
commit to a detached HEAD. It is configurable in color.status.nobranch.
Signed-off-by: NChris Parsons <chris@edendevelopment.co.uk>
Acked-by: NJeff King <peff@peff.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NHeikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

While repacking a local repository a coworker thought the -n option
was necessary to git-repack to keep it from updating some unknown
file on the central server we all share.  Explaining further what
the option is (not) doing helps to make it clear the option does
not impact any remote repositories the user may have configured.
Signed-off-by: NShawn O. Pearce <spearce@spearce.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

When rebasing fails during "pull --rebase", you cannot just clean up the
working directory and call "pull --rebase" again, since the remote branch
was already fetched.

Therefore, die early when the working directory is dirty.
Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Fix chop_str not to cut in middle of utf8 multibyte chars. Without
this fix at least author name in short log may cut in middle of a
multibyte char. When the result comes to esc_html to_utf8 is called
again, which doesn't find valid utf8 and decodes using
$fallback_encoding making it even worse.

This also have the nice side effect that it actually tries to show the
first 10 _characters_, not the number of characters that happened to fit
into 10 bytes.
Signed-off-by: NAnders Waldenborg <anders@0x63.nu>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Commit 94503a66 ("gitk: Fix "wrong #
coordinates" error on reload") was correct as far as it went, but
introduced a problem because it didn't also clear out boldrows and
boldnamerows in clear_display.  This resulted in Tcl errors after
scrolling through the graph for a while if some rows were highlighted.
This fixes it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* maint:
  git-am: fix typo in usage message
  doc/git-daemon: s/uploadarchive/uploadarch/

* maint-1.5.4:
  git-am: fix typo in usage message
  doc/git-daemon: s/uploadarchive/uploadarch/

* ar/add-unreadable:
  Add a config option to ignore errors for git-add
  Add a test for git-add --ignore-errors
  Add --ignore-errors to git-add to allow it to skip files with read errors
  Extend interface of add_files_to_cache to allow ignore indexing errors
  Make the exit code of add_file_to_index actually useful

* ds/branch-auto-rebase:
  Allow tracking branches to set up rebase by default.

* sv/first-parent:
  revision.c: really honor --first-parent
  Simplify and fix --first-parent implementation

* np/pack:
  pack-objects: fix early eviction for max depth delta objects
  pack-objects: allow for early delta deflating
  pack-objects: move compression code in a separate function
  pack-objects: clean up write_object() a bit
  pack-objects: simplify the condition associated with --all-progress
  pack-objects: remove some double negative logic
  pack-objects: small cleanup

* as/graph:
  graph API: eliminate unnecessary indentation
  log and rev-list: add --graph option
  Add history graph API
  revision API: split parent rewriting and parent printing options

* jk/maint-send-email-compose:
  send-email: rfc2047-quote subject lines with non-ascii characters
  send-email: specify content-type of --compose body

Conflicts:

	t/t9001-send-email.sh

Due to 065096c2 (git-send-email.perl: Handle shell metacharacters in
$EDITOR properly, 2008-05-04) which is a backward incompatible change (but
it makes handling of EDITOR consistent with other parts of the system),
the test script t9001 had to be adjusted.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

* hb/maint-send-email-quote-recipients:
  Fix recipient santitization

For a given project the directory used with the -w option is almost always
the same each time.  Let it be specified with 'cvsexportcommit.cvsdir' so
it's not necessary to manually add it with -w each time.
Signed-off-by: NTrent Piepho <tpiepho@freescale.com>
Acked-by: NRobin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Need to quote all special characters, not just the first one
Signed-off-by: NHorst H. von Brand <vonbrand@inf.utfsm.cl>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

We always use 'utf-8' as the encoding, since we currently
have no way of getting the information from the user.

This also refactors the quoting of recipient names, since
both processes can share the rfc2047 quoting code.
Signed-off-by: NJeff King <peff@peff.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

If the compose message contains non-ascii characters, then
we assume it is in utf-8 and include the appropriate MIME
headers. If the user has already included a MIME-Version
header, then we assume they know what they are doing and
don't add any headers.
Signed-off-by: NJeff King <peff@peff.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NChristian Couder <chriscool@tuxfamily.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

gitcli(5) already documents them, and there are no options named
--no-no-stat, --no-no-summary and --no-no-log.
Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

[jc: squashed in suggestions from Jeff King]
Signed-off-by: NAlex Riesen <raa.lkml@gmail.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The patterns to the case statement could never be matched, so the hook
was a noop. This patch also replaces the non-portable use of in-place sed.
Signed-off-by: NMarcel Koeppen <git-dev@marzelpan.de>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The display of the current row number would stop working if the user
clicked on a line, or if selectedline got unset for any other reason,
because the trace on it got lost when it was unselected.  This fixes
it by changing the places that unset selectedline to set it to the
empty string instead, and the places that tested for it being set or
unset to compare it with the empty string.  Thus it never gets unset
now.  This actually simplified the code in a few places since it can
be compared for equality with a row number now without first testing
if it is set.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NJeff King <peff@peff.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>