- 29 9月, 2006 1 次提交
-
-
由 Johannes Schindelin 提交于
Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 28 9月, 2006 2 次提交
-
-
由 Jon Loeliger 提交于
Clarified that parse_extra_args()s results in interpolation table entries. Removed a few trailing whitespace occurrences. Signed-off-by: NJon Loeliger <jdl@jdl.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jon Loeliger 提交于
Standardized on lowercase hostnames from client. Added interpolation values for the IP address, port and canonical hostname of the server as it is contacted and named by the client and passed in via the extended args. Added --listen=host_or_ipaddr option suport. Renamed port variable as "listen_port" correspondingly as well. Documented mutual exclusivity of --inetd option with --user, --group, --listen and --port options. Added compat/inet_pton.c from Paul Vixie as needed. Small memory leaks need to be cleaned up still. Signed-off-by: NJon Loeliger <jdl@jdl.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 21 9月, 2006 1 次提交
-
-
由 Jon Loeliger 提交于
Signed-off-by: Jon Loeliger Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 10 9月, 2006 1 次提交
-
-
由 Franck Bui-Huu 提交于
This command implements the git archive protocol on the server side. This command is not intended to be used by the end user. Underlying git-archive command line options are sent over the protocol from "git-archive --remote=...", just like upload-tar currently does with "git-tar-tree=...". As for "git-archive" command implementation, this new command does not execute any existing "git-{tar,zip}-tree" but rely on the archive API defined by "git-archive" patch. Hence we get 2 good points: - "git-archive" and "git-upload-archive" share all option parsing code. - All kind of git-upload-{tar,zip} can be deprecated. Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 07 9月, 2006 1 次提交
-
-
由 Junio C Hamano 提交于
This reverts parts of commit 74c0cc21 and part of commit 355f5412. Franck and Rene are working on a unified upload-archive which would supersede this when done, so better not to get in their way. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 28 8月, 2006 2 次提交
-
-
由 Junio C Hamano 提交于
This allows clients to ask for tarballs with: git tar-tree --remote=git://server/repo refname By default, the upload-tar service is not enabled. To enable it server-wide, the server can be started with: git-daemon --enable=upload-tar This service is by default overridable per repostiory, so alternatively, a repository can define "daemon.uploadtar = true" to enable it. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This adds an infrastructure to selectively enable and disable more than one services in git-daemon. Currently upload-pack service, which serves the git-fetch-pack and git-peek-remote clients, is the only service that is defined. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 27 8月, 2006 1 次提交
-
-
由 Jonas Fonseca 提交于
Change places that use realloc, without a proper error path, to instead use xrealloc. Drop an erroneous error path in the daemon code that used errno in the die message in favour of the simpler xrealloc. Signed-off-by: NJonas Fonseca <fonseca@diku.dk> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 23 8月, 2006 1 次提交
-
-
由 Tilman Sauerbeck 提交于
Signed-off-by: NTilman Sauerbeck <tilman@code-monkey.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 16 8月, 2006 1 次提交
-
-
由 David Rientjes 提交于
[jc: I needed to hand merge the changes to the updated codebase, so the result needs to be checked.] Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 28 7月, 2006 1 次提交
-
-
由 Matthias Lederhofer 提交于
Signed-off-by: NMatthias Lederhofer <matled@gmx.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 14 7月, 2006 4 次提交
-
-
由 Matthias Lederhofer 提交于
Signed-off-by: NMatthias Lederhofer <matled@gmx.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Matthias Lederhofer 提交于
Signed-off-by: NMatthias Lederhofer <matled@gmx.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Matthias Lederhofer 提交于
Signed-off-by: NMatthias Lederhofer <matled@gmx.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Matthias Lederhofer 提交于
Removed the git-daemon prefix from die() because no other call to die does this. Signed-off-by: NMatthias Lederhofer <matled@gmx.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 28 6月, 2006 1 次提交
-
-
由 Timo Hirvonen 提交于
Signed-off-by: NTimo Hirvonen <tihirvon@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 22 6月, 2006 1 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 21 6月, 2006 1 次提交
-
-
由 David Woodhouse 提交于
When we run git-daemon from inetd, even with the --verbose option, it doesn't log the peer address. That logic was only in the standalone daemon code -- move it to the execute() function instead. Tested with both IPv6 and Legacy IP clients, in both inetd and daemon mode. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NJon Loeliger <jdl@jdl.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 20 6月, 2006 1 次提交
-
-
由 Junio C Hamano 提交于
It was reported that under one implementation of socks client "git clone" fails with "error: waitpid failed (No child processes)", because "git" is spawned after setting SIGCHLD to SIG_IGN. Arguably it may be a broken setting, but we should protect ourselves so that we can get reliable results from waitpid() for the children we care about. This patch resets SIGCHLD to SIG_DFL in three places: - connect.c::git_connect() - initiators of git native protocol transfer are covered with this. - daemon.c::main() - obviously. - merge-index.c::main() - obviously. There are other programs that do fork() but do not waitpid(): http-push, imap-send. upload-pack does not either, but in the case of that program, each of the forked halves runs exec() another program, so this change would not have much effect there. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 07 6月, 2006 1 次提交
-
-
由 Jon Loeliger 提交于
Add client side sending of "\0host=%s\0" extended arg for git native protocol, backwards compatibly. Signed-off-by: NJon Loeliger <jdl@jdl.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 25 4月, 2006 1 次提交
-
-
由 Serge E. Hallyn 提交于
The set_reuse_addr() error case was the only error case in socklist() where we returned rather than continued. Not sure why. Either we must free the socklist, or continue. This patch continues on error. Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com> Signed-off-by: NJunio C Hamano <junkio@cox.net> (cherry picked from 0032d548 commit)
-
- 19 4月, 2006 1 次提交
-
-
由 Serge E. Hallyn 提交于
The set_reuse_addr() error case was the only error case in socklist() where we returned rather than continued. Not sure why. Either we must free the socklist, or continue. This patch continues on error. Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 06 2月, 2006 3 次提交
-
-
由 Junio C Hamano 提交于
Earlier, we made --base-path to automatically forbid user-relative paths, which was probably a mistake. This introduces --user-path (or --user-path=path) option to control the use of user-relative paths independently. The latter form of the option can be used to restrict accesses to a part of each user's home directory, similar to "public_html" some webservers supports. If we're invoked with --user-path=FOO option, then a URL of the form git://~USER/PATH/... resolves to the path HOME/FOO/PATH/..., where HOME is USER's home directory. [jc: This is much reworked by me so bugs are mine, but the original patch was done by Mark Wooding.] Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Mark Wooding 提交于
Without this, you can silently lose the ability to receive IPv4 connections if you stop and restart the daemon. [jc: tweaked code organization a bit and made this controllable from a command line option.] Signed-off-by: NMark Wooding <mdw@distorted.org.uk> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Using base-path to relocate the server public space does not have anything to do with allowing or forbidding user relative paths. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 04 2月, 2006 1 次提交
-
-
由 Mark Wooding 提交于
Could cause a crash if --base-path set. Unlikely to be a security the concern: message doesn't go to the client, so we can't leak anything (except by dumping core), and we've already forked, so it's not a denial of service. Signed-off-by: NMark Wooding <mdw@distorted.org.uk> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 14 1月, 2006 1 次提交
-
-
由 Michal Ostrowski 提交于
The git suite may not be in PATH (and thus programs such as git-send-pack could not exec git-rev-list). Thus there is a need for logic that will locate these programs. Modifying PATH is not desirable as it result in behavior differing from the user's intentions, as we may end up prepending "/usr/bin" to PATH. - git C programs will use exec*_git_cmd() APIs to exec sub-commands. - exec*_git_cmd() will execute a git program by searching for it in the following directories: 1. --exec-path (as used by "git") 2. The GIT_EXEC_PATH environment variable. 3. $(gitexecdir) as set in Makefile (default value $(bindir)). - git wrapper will modify PATH as before to enable shell scripts to invoke "git-foo" commands. Ideally, shell scripts should use the git wrapper to become independent of PATH, and then modifying PATH will not be necessary. [jc: with minor updates after a brief review.] Signed-off-by: NMichal Ostrowski <mostrows@watson.ibm.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 08 1月, 2006 1 次提交
-
-
由 Petr Baudis 提交于
Tommi Virtanen expressed a wish on #git to be able to use short and elegant git URLs by making git-daemon 'root' in a given directory. This patch implements this, causing git-daemon to interpret all paths relative to the given base path if any is given. Signed-off-by: NPetr Baudis <pasky@suse.cz> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 04 12月, 2005 1 次提交
-
-
由 Junio C Hamano 提交于
The whitelist of git-daemon is checked against return value from enter_repo(), and enter_repo() used to return the value obtained from getcwd() to avoid directory aliasing issues as discussed earier (mid October 2005). Unfortunately, it did not go well as we hoped. For example, /pub on a kernel.org public machine is a symlink to its real mountpoint, and it is understandable that the administrator does not want to adjust the whitelist every time /pub needs to point at a different partition for storage allcation or whatever reasons. Being able to keep using /pub/scm as the whitelist is a desirable property. So this version of enter_repo() reports what it used to chdir() and validate, but does not use getcwd() to canonicalize the directory name. When it sees a user relative path ~user/path, it internally resolves it to try chdir() there, but it still reports ~user/path (possibly after appending .git if allowed to do so, in which case it would report ~user/path.git). What this means is that if a whitelist wants to allow a user relative path, it needs to say "~" (for all users) or list user home directories like "~alice" "~bob". And no, you cannot say /home if the advertised way to access user home directories are ~alice,~bob, etc. The whole point of this is to avoid unnecessary aliasing issues. Anyway, because of this, daemon needs to do a bit more work to guard itself. Namely, it needs to make sure that the accessor does not try to exploit its leading path match rule by inserting /../ in the middle or hanging /.. at the end. I resurrected the belts and suspender paranoia code HPA did for this purpose. This check cannot be done in the enter_repo() unconditionally, because there are valid callers of enter_repo() that want to honor /../; authorized users coming over ssh to run send-pack and fetch-pack should be allowed to do so. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 22 11月, 2005 3 次提交
-
-
由 Paul Serice 提交于
git-daemon was not listening when compiled with -DNO_IPV6. socksetup() was not returning socket count when compiled with -DNO_IPV6. Signed-off-by: NPaul Serice <paul@serice.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
- Do validation only on canonicalized paths - Run upload-pack with "." as repository argument Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Andreas Ericsson 提交于
Dropped a fair amount of reundant code in favour of the library code in path.c Added option --strict-paths with documentation, with backwards compatibility for whitelist entries with symlinks. Everything that worked earlier still works insofar as I have remembered testing it. Signed-off-by: NAndreas Ericsson <ae@op5.se> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 17 11月, 2005 2 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Andreas Ericsson 提交于
Allow --init-timeout and --timeout to be specified without falling through to usage(). Make sure openlog() is called even if implied by --inetd, or messages will be sent to wherever LOG_USER ends up. Signed-off-by: NAndreas Ericsson <ae@op5.se> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 15 11月, 2005 1 次提交
-
-
由 Andreas Ericsson 提交于
Otherwise nothing is logged anywhere, which is a Bad Thing. Signed-off-by: NAndreas Ericsson <ae@op5.se> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 26 10月, 2005 1 次提交
-
-
由 Randal L. Schwartz 提交于
I can confirm that the following patch lets the current origin compile on OpenBSD. If you could apply this until you sort out the rest of the namespace issue, I would be happy. Thanks. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 21 10月, 2005 3 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 H. Peter Anvin 提交于
Fix stupid bug in parsing the --init-timeout option. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 H. Peter Anvin 提交于
Fix stupid bug in parsing the --init-timeout option. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-