- 16 1月, 2015 6 次提交
-
-
由 Junio C Hamano 提交于
No external callers exist. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
No external callers exist. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
No external callers exist. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Reviewed-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
This was whittled down to a compatibility wrapper around the more flexible git_prompt() in 1cb0134f (refactor git_getpass into generic prompt function, 2011-12-10), waiting for the final callers to go away. That happened in 791643a8 (imap-send: use git-credential, 2014-04-28) when imap-send learned to use the credential interface. Reviewed-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
They used to be used directly by remote-curl.c for the smart-http protocol. But they got wrapped by run_one_slot() in beed336c (http: never use curl_easy_perform, 2014-02-18). Any future users are expected to follow that route. Reviewed-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 15 1月, 2015 18 次提交
-
-
由 Junio C Hamano 提交于
Hopefully this will be the final feature update for 2.3-rc1 Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* po/doc-core-ignorestat: doc: core.ignoreStat update, and clarify the --assume-unchanged effect doc: core.ignoreStat clarify the --assume-unchanged effect
-
由 Junio C Hamano 提交于
* rc/for-each-ref-tracking: for-each-ref: always check stat_tracking_info()'s return value
-
由 Junio C Hamano 提交于
Build update for older RHEL. * rh/autoconf-rhel3: configure.ac: check for HMAC_CTX_cleanup configure.ac: check for clock_gettime and CLOCK_MONOTONIC configure.ac: check 'tv_nsec' field in 'struct stat'
-
由 Junio C Hamano 提交于
* ak/fewer-includes: cat-file: remove unused includes git.c: remove unnecessary #includes
-
由 Junio C Hamano 提交于
* ak/doc-add-v-n-options: Documentation: list long options for -v and -n
-
由 Junio C Hamano 提交于
* ak/show-branch-usage-string: show-branch: line-wrap show-branch usage
-
由 Junio C Hamano 提交于
We try to see if "tput" gives a useful result before switching TERM to dumb and moving HOME to point to our fake location for stability of the tests, and then use the command when coloring the output from the tests, but there is no guarantee "tput" works after switching HOME. * rh/test-color-avoid-terminfo-in-original-home: test-lib.sh: do tests for color support after changing HOME test-lib: use 'test ...' instead of '[ ... ]'
-
由 Junio C Hamano 提交于
Using the exit status of the last command in the prompt, e.g. PS1='$(__git_ps1) $? ', did not work well because the helper function stomped on the exit status. * tf/prompt-preserve-exit-status: git-prompt: preserve value of $? in all cases
-
由 Junio C Hamano 提交于
* rh/hide-prompt-in-ignored-directory: git-prompt.sh: allow to hide prompt for ignored pwd git-prompt.sh: if pc mode, immediately set PS1 to a plain prompt
-
由 Junio C Hamano 提交于
* mm/complete-rebase-autostash: git-completion: add --autostash for 'git rebase'
-
由 Junio C Hamano 提交于
A long overdue documentation update to match an age-old code update. * aw/doc-smtp-ssl-cert-path: correct smtp-ssl-cert-path description
-
由 Junio C Hamano 提交于
* sp/subtree-doc: subtree: fix AsciiDoc list item continuation
-
由 Junio C Hamano 提交于
* km/log-usage-string-i18n: log.c: fix translation markings
-
由 Junio C Hamano 提交于
Now imap-send learned to talk to the server using cURL library, allow the same GIT_CURL_VERBOSE environment variable to control the verbosity of the chattering. * km/imap-send-libcurl-options: imap-send.c: set CURLOPT_USE_SSL to CURLUSESSL_TRY imap-send.c: support GIT_CURL_VERBOSE
-
由 Junio C Hamano 提交于
Fix recent breakage in Git 2.2 that started creating info/refs and objects/info/packs files with permission bits tighter than user's umask. * jk/prune-packed-server-info: update-server-info: create info/* with mode 0666 t1301: set umask in reflog sharedrepository=group test
-
由 Junio C Hamano 提交于
"git remote add $name $URL" is now allowed when "url.$URL.insteadOf" is already defined. * js/remote-add-with-insteadof: Add a regression test for 'git remote add <existing> <same-url>' git remote: allow adding remotes agreeing with url.<...>.insteadOf
-
由 Tony Finch 提交于
Signed-off-by: NTony Finch <dot@dotat.at> Reviewed-by: NSZEDER Gábor <szeder@ira.uka.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 13 1月, 2015 16 次提交
-
-
由 Philip Oakley 提交于
The assume-unchanged bit, and consequently core.ignoreStat, can be misunderstood. Be assertive about the expectation that file changes should notified to Git. Overhaul the general wording thus: 1. direct description of what is ignored given first. 2. example instruction of the user manual action required. 3. use sideways indirection for assume-unchanged and update-index references. 4. add a 'normally' to give leeway for the change detection. Signed-off-by: NPhilip Oakley <philipoakley@iee.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Raphael Kubo da Costa 提交于
The code handling %(upstream:track) and %(upstream:trackshort) assumed that it always had a valid branch that had been sanitized earlier in populate_value(), and thus did not check the return value of the call to stat_tracking_info(). While there is indeed some sanitization code that basically corresponds to stat_tracking_info() returning 0 (no base branch set), the function can also return -1 when the base branch did exist but has since then been deleted. In this case, num_ours and num_theirs had undefined values and a call to `git for-each-ref --format="%(upstream:track)"` could print spurious values such as [behind -111794512] [ahead 38881640, behind 5103867] even for repositories with one single commit. Verify stat_tracking_info()'s return value and do not print anything if it returns -1. This behavior also matches the documentation ("has no effect if the ref does not have tracking information associated with it"). Helped-by: NEric Sunshine <sunshine@sunshineco.com> Helped-by: NJeff King <peff@peff.net> Signed-off-by: NRaphael Kubo da Costa <raphael.kubo.da.costa@intel.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* jk/read-packed-refs-without-path-max: read_packed_refs: use skip_prefix instead of static array read_packed_refs: pass strbuf to parse_ref_line read_packed_refs: use a strbuf for reading lines
-
由 Junio C Hamano 提交于
* mg/add-ignore-errors: add: ignore only ignored files
-
由 Junio C Hamano 提交于
* mh/find-uniq-abbrev: sha1_name: avoid unnecessary sha1 lookup in find_unique_abbrev
-
由 Junio C Hamano 提交于
* jk/approxidate-avoid-y-d-m-over-future-dates: approxidate: allow ISO-like dates far in the future pass TIME_DATE_NOW to approxidate future-check
-
由 Junio C Hamano 提交于
* rw/apply-does-not-take-ignore-date: git-am.txt: --ignore-date flag is not passed to git-apply
-
由 Junio C Hamano 提交于
* jk/for-each-reflog-ent-reverse: for_each_reflog_ent_reverse: turn leftover check into assertion for_each_reflog_ent_reverse: fix newlines on block boundaries
-
由 Junio C Hamano 提交于
Earlier we made "rev-list --object-edge" more aggressively list the objects at the edge commits, in order to reduce number of objects fetched into a shallow repository, but the change affected cases other than "fetching into a shallow repository" and made it unusably slow (e.g. fetching into a normal repository should not have to suffer the overhead from extra processing). Limit it to a more specific case by introducing --objects-edge-aggressive, a new option to rev-list. * bc/fetch-thin-less-aggressive-in-normal-repository: pack-objects: use --objects-edge-aggressive for shallow repos rev-list: add an option to mark fewer edges as uninteresting Documentation: add missing article in rev-list-options.txt
-
由 Junio C Hamano 提交于
* sb/doc-submitting-patches-keep-notes: SubmittingPatches: explain rationale for using --notes with format-patch
-
由 Junio C Hamano 提交于
* rs/simplify-transport-get: transport: simplify duplicating a substring in transport_get() using xmemdupz()
-
由 Junio C Hamano 提交于
* rs/simplify-parsing-commit-tree-S: commit-tree: simplify parsing of option -S using skip_prefix()
-
由 Junio C Hamano 提交于
* rs/plug-strbuf-leak-in-merge: merge: release strbuf after use in suggest_conflicts()
-