- 24 8月, 2012 1 次提交
-
-
由 Eric S. Raymond 提交于
Signed-off-by: NEric S. Raymond <esr@thyrsus.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 23 8月, 2012 1 次提交
-
-
由 Eric S. Raymond 提交于
These changes remove all need to modify the ciabot scripts for installation. Instead, per-project configuration can be dome via variables in a [ciabot] section of the config file. Also, correct for the new server address. Signed-off-by: NEric S. Raymond <esr@thyrsus.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 16 8月, 2012 3 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* rj/maint-grep-remove-redundant-test: t7810-*.sh: Remove redundant test
-
由 Junio C Hamano 提交于
* hv/link-alt-odb-entry: link_alt_odb_entry: fix read over array bounds reported by valgrind
-
- 07 8月, 2012 12 次提交
-
-
由 Junio C Hamano 提交于
Hopefully that will be the final 1.7.11.x maintenance release. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* jn/block-sha1: Makefile: BLK_SHA1 does not require fast htonl() and unaligned loads block-sha1: put expanded macro parameters in parentheses block-sha1: avoid pointer conversion that violates alignment constraints
-
由 Junio C Hamano 提交于
* jn/make-assembly-in-right-directory: Makefile: fix location of listing produced by "make subdir/foo.s"
-
由 Junio C Hamano 提交于
* ms/daemon-doc-typo: Documentation/git-daemon: add missing word
-
由 Junio C Hamano 提交于
* lm/git-blame-el: git-blame.el: Do not use bare 0 to mean (point-min) git-blame.el: Use with-current-buffer where appropriate git-blame.el: Do not use goto-line in lisp code
-
由 Junio C Hamano 提交于
* rs/ipv6-ssh-url: git: Wrong parsing of ssh urls with IPv6 literals ignores port
-
由 Junio C Hamano 提交于
* rs/git-blame-mapcar-mapc: git-blame.el: use mapc instead of mapcar
-
由 Junio C Hamano 提交于
* rr/doc-commit: commit: document a couple of options
-
由 Štěpán Němec 提交于
- (glossary) the quotes around the Wikipedia URL prevented its linkification in frontends that support it; remove them - (manual) newer version (SHA-1) == following, older == preceding, not the other way around - trivial typo and wording fixes Signed-off-by: NŠtěpán Němec <stepnem@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* jk/maint-checkout-orphan-check-fix: checkout: don't confuse ref and object flags
-
由 Junio C Hamano 提交于
* mh/maint-revisions-doc: Enumerate revision range specifiers in the documentation Make <refname> documentation more consistent.
-
由 Junio C Hamano 提交于
* jc/mergetool-tool-help: mergetool: support --tool-help option like difftool does
-
- 31 7月, 2012 8 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
"$GIT_DIR/COMMIT_EDITMSG" file that is used to hold the commit log message user edits was not documented. * jk/maint-commit-document-editmsg: commit: document the temporary commit message file
-
由 Junio C Hamano 提交于
The advise() function did not use varargs correctly to format its message. * jk/maint-advise-vaddf: advice: pass varargs to strbuf_vaddf, not strbuf_addf
-
由 Junio C Hamano 提交于
"git commit-tree" learned a more natural "-p <parent> <tree>" order of arguments long time ago, but recently forgot it by mistake. * kk/maint-commit-tree: Revert "git-commit-tree(1): update synopsis" commit-tree: resurrect command line parsing updates
-
由 Junio C Hamano 提交于
"git diff --no-ext-diff" did not output anything for a typechange filepair when GIT_EXTERNAL_DIFF is in effect. * jv/maint-no-ext-diff: diff: test precedence of external diff drivers diff: correctly disable external_diff with --no-ext-diff
-
由 Junio C Hamano 提交于
When "git am" failed, old timers knew to check .git/rebase-apply/patch to see what went wrong, but we never told the users about it. * pg/maint-1.7.9-am-where-is-patch: am: indicate where a failed patch is to be found
-
由 Junio C Hamano 提交于
When "git submodule add" clones a submodule repository, it can get confused where to store the resulting submodule repository in the superproject's .git/ directory when there is a symbolic link in the path to the current directory. * jl/maint-1.7.10-recurse-submodules-with-symlink: submodules: don't stumble over symbolic links when cloning recursively
-
由 Junio C Hamano 提交于
In 1.7.9 era, we taught "git rebase" about the raw timestamp format but we did not teach the same trick to "filter-branch", which rolled a similar logic on its own. * jc/maint-filter-branch-epoch-date: t7003: add test to filter a branch with a commit at epoch date.c: Fix off by one error in object-header date parsing filter-branch: do not forget the '@' prefix to force git-timestamp
-
- 30 7月, 2012 2 次提交
-
-
由 Ramsay Jones 提交于
Since commit bbc09c22 ("grep: rip out support for external grep", 12-01-2010), test number 60 ("grep -C1 hunk mark between files") is essentially the same as test number 59. Test 59 was intended to verify the behaviour of git-grep resulting from multiple invocations of an external grep. As part of the test, it creates and adds 1024 files to the index, which is now wasted effort. Remove test 59, since it is now redundant. Signed-off-by: NRamsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Heiko Voigt 提交于
pfxlen can be longer than the path in objdir when relative_base contains the path to gits object directory. Here we are interested in checking if ent->base[] (the part that corresponds to .git/objects) is the same string as objdir, and the code NUL-terminated ent->base[] to LEADING PATH\0XX/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX\0 in preparation for these "duplicate check" step (before we return from the function, the first NUL is turned into '/' so that we can fill XX when probing for loose objects). All we need to do is to compare the string with the path to our object directory. Signed-off-by: NHeiko Voigt <hvoigt@hvoigt.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 26 7月, 2012 1 次提交
-
-
由 Jeff King 提交于
When we are leaving a detached HEAD, we do a revision traversal to check whether we are orphaning any commits, marking the commit we're leaving as the start of the traversal, and all existing refs as uninteresting. Prior to commit 468224e5, we did so by calling for_each_ref, and feeding each resulting refname to setup_revisions. Commit 468224e5 refactored this to simply mark the pending objects, saving an extra lookup. However, it confused the "flags" parameter to the each_ref_fn clalback, which is about the flags we found while looking up the ref with the object flag. Because REF_ISSYMREF ("this ref is a symbolic ref, e.g. refs/remotes/origin/HEAD") happens to be the same bit pattern as SEEN ("we have picked this object up from the pending list and moved it to revs.commits list"), we incorrectly reported that a commit previously at the detached HEAD will become unreachable if the only ref that can reach the commit happens to be pointed at by a symbolic ref. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 25 7月, 2012 1 次提交
-
-
由 Junio C Hamano 提交于
It was a bit hard to learn how <rev>^@, <rev>^! and various other forms of range specifiers are used, because they were discussed mostly in the prose part of the documentation, unlike various forms of extended SHA-1 expressions that are listed in an enumerated list. Also add a few more examples showing use of <rev>, <rev>..<rev> and <rev>^! forms, stolen from a patch by Max Horn. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 24 7月, 2012 4 次提交
-
-
由 Jeff King 提交于
We do not document COMMIT_EDITMSG at all, but users may want to know about it for two reasons: 1. They may want to tell their editor to configure itself for formatting a commit message. 2. If a commit is aborted by an error, the user may want to recover the commit message they typed. Let's put a note in git-commit(1). Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
This way we do not have to risk the list of tools going out of sync between the implementation and the documentation. In the same spirit as bf73fc21 (difftool: print list of valid tools with '--tool-help', 2012-03-29), trim the list of merge backends in the documentation. We do not want to have a complete list of valid tools; we only want a list to help people guess what kind of things the tools do to be specified there, and refer them to --tool-help for a complete list. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
The advise() function takes a variable number of arguments and converts them into a va_list object to pass to strbuf for handling. However, we accidentally called strbuf_addf (that takes a variable number of arguments) instead of strbuf_vaddf (that takes a va_list). This bug dates back to v1.7.8.1-1-g23cb5bf3, but we never noticed because none of the current callers passes a string with a format specifier in it. And the compiler did not notice because the format string is not available at compile time. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
block-sha1/ is fast on most known platforms. Clarify the Makefile to be less misleading about that. Early versions of block-sha1/ explicitly relied on fast htonl() and fast 32-bit loads with arbitrary alignment. Now it uses those on some arches but the default behavior is byte-at-a-time access for the sake of arches like ARM, Alpha, and their kin and it is still pretty fast on these arches (fast enough to supersede the mozilla SHA1 implementation and the hand-written ARM assembler implementation that were bundled before). Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 23 7月, 2012 7 次提交
-
-
由 Jonathan Nieder 提交于
When I invoke "make block-sha1/sha1.s", 'make' runs $(CC) -S without specifying where it should put its output and the output ends up in ./sha1.s. Confusing. Add an -o option to the .s rule to fix this. We were already doing that for most compiler invocations but had forgotten it for the assembler listings. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
't' is currently always a numeric constant, but it can't hurt to prepare for the day that it becomes useful for a caller to pass in a more complex expression. Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
With 660231aa (block-sha1: support for architectures with memory alignment restrictions, 2009-08-12), blk_SHA1_Update was modified to access 32-bit chunks of memory one byte at a time on arches that prefer that: #define get_be32(p) ( \ (*((unsigned char *)(p) + 0) << 24) | \ (*((unsigned char *)(p) + 1) << 16) | \ (*((unsigned char *)(p) + 2) << 8) | \ (*((unsigned char *)(p) + 3) << 0) ) The code previously accessed these values by just using htonl(*p). Unfortunately, Michael noticed on an Alpha machine that git was using plain 32-bit reads anyway. As soon as we convert a pointer to int *, the compiler can assume that the object pointed to is correctly aligned as an int (C99 section 6.3.2.3 "pointer conversions" paragraph 7), and gcc takes full advantage by using a single 32-bit load, resulting in a whole bunch of unaligned access traps. So we need to obey the alignment constraints even when only dealing with pointers instead of actual values. Do so by changing the type of 'data' to void *. This patch renames 'data' to 'block' at the same time to make sure all references are updated to reflect the new type. Reported-tested-and-explained-by: NMichael Cree <mcree@orcon.net.nz> Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
The error message from "git push $there :bogo" (and its equivalent "git push $there --delete bogo") mentioned that we tried and failed to guess what ref is being deleted based on the LHS of the refspec, which we don't. * jk/push-delete-ref-error-message: push: don't guess at qualifying remote refs on deletion
-
由 Junio C Hamano 提交于
A handful of files and directories we create had tighter than necessary permission bits when the user wanted to have group writability (e.g. by setting "umask 002"). * ar/clone-honor-umask-at-top: add: create ADD_EDIT.patch with mode 0666 rerere: make rr-cache fanout directory honor umask Restore umasks influence on the permissions of work tree created by clone
-
由 Junio C Hamano 提交于
"commit --amend" used to refuse amending a commit with an empty log message, with or without "--allow-empty-message". * cw/amend-commit-without-message: Allow edit of empty message with commit --amend
-