- 19 12月, 2006 12 次提交
-
-
由 Junio C Hamano 提交于
* jc/test-clone: (35 commits) Introduce GIT_TEMPLATE_DIR Revert "fix testsuite: make sure they use templates freshly built from the source" fix testsuite: make sure they use templates freshly built from the source rerere: fix breakage of resolving. Add config example with respect to branch Add documentation for show-branch --topics make git a bit less cryptic on fetch errors make patch_delta() error cases a bit more verbose racy-git: documentation updates. show-ref: fix --exclude-existing parse-remote::expand_refs_wildcard() vim syntax: follow recent changes to commit template show-ref: fix --verify --hash=length show-ref: fix --quiet --verify avoid accessing _all_ loose refs in git-show-ref --verify git-fetch: Avoid reading packed refs over and over again Teach show-branch how to show ref-log data. markup fix in svnimport documentation. Documentation: new option -P for git-svnimport Fix mis-mark-up in git-merge-file.txt documentation ...
-
由 Johannes Schindelin 提交于
Instead of passing --template explicitely to init-db and clone, you can just set the environment variable GIT_TEMPLATE_DIR. Also make use of it in the tests, to make sure that the templates are copied. Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This reverts commit 74d20040. Version from Johannes to introduce GIT_TEMPLATE_DIR is simpler, although I unconsciously stayed away from introducing yet another environment variable.
-
由 Junio C Hamano 提交于
The initial t/trash repository for testing was created properly but over time we gained many tests that create secondary test repositories with init-db or clone and they were not careful enough. This fixes it. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
commit e2b70087 botched the RCS merge to git-merge-file conversion. There is no command called "git merge-file" (yes, we are using safer variant of Perl's system(3)). Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Aneesh Kumar K.V 提交于
Update config.txt with example with respect to branch config variable. This give a better idea regarding how branch names are expected. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Brian Gernhardt 提交于
Add a quick paragraph explaining the --topics option for show-branch. The explanation is an abbreviated version of the commit message from d320a543. Signed-off-by: NBrian Gernhardt <benji@silverinsanity.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
The remote server might not want to tell why it doesn't like us for security reasons, but let's make the client report such error in a bit less confusing way. The remote failure remains a mystery, but the local message might be a bit less so. [jc: with a gentle wording updates from Andy Parkins] Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
It is especially important to distinguish between a malloc() failure from all the other cases. An out of memory condition is much less worrisome than a compatibility/corruption problem. Also make test-delta compilable again. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
We've removed the workaround for runtime penalty that did not exist in practice some time ago, but the technical paper that proposed that change still said "we probably should do so". Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Do not falsely document --filter-invalid which does not even exist. Also make sure the line is long enough to have ^{} suffix before checking for it. Pointed out by Dscho. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Work around dash incompatibility by not using "${name%'^{}'}". Noticed by Jeff King; dash seems to mistake the closing brace inside the single quote as the terminating brace for parameter expansion. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 18 12月, 2006 12 次提交
-
-
由 Jeff King 提交于
This patch changes the syntax highlighting to correctly match the new text of the commit message introduced by 82dca848Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
An earlier optimization for --verify broke a lot of stuff because it did not take interaction with other flags into account. This also fixes an unrelated argument parsing error; --hash=8 should mean the same as "--hash --abbrev=8". Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
* jc/blame-boundary: git-blame: show lines attributed to boundary commits differently.
-
由 Junio C Hamano 提交于
* 'jc/reflog' (early part): Teach show-branch how to show ref-log data.
-
由 Junio C Hamano 提交于
* js/branch-config: git-branch: rename config vars branch.<branch>.*, too add a function to rename sections in the config
-
由 Junio C Hamano 提交于
* 'jn/web' (early part): gitweb: Add "next" link to commit view gitweb: Add title attribute to ref marker with full ref name gitweb: Do not show difftree for merges in "commit" view gitweb: SHA-1 in commit log message links to "object" view gitweb: Hyperlink target of symbolic link in "tree" view (if possible) gitweb: Add generic git_object subroutine to display object of any type gitweb: Show target of symbolic link in "tree" view gitweb: Don't use Content-Encoding: header in git_snapshot
-
由 Junio C Hamano 提交于
If you want to verify a ref, it is overkill to first read all loose refs into a linked list, and then check if the desired ref is there. Signed-off-by: NJunio C Hamano <junkio@cox.net> Acked-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de>
-
由 Junio C Hamano 提交于
When checking which tags to fetch, the old code used to call git-show-ref --verify for each remote tag. Since reading even packed refs is not a cheap operation when there are a lot of local refs, the code became quite slow. This fixes it by teaching git-show-ref to filter out existing refs using a new mode of operation of git-show-ref. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Quy Tonthat 提交于
Documentation: new option -P for git-svnimport. Signed-off-by: NQuy Tonthat <qtonthat@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 17 12月, 2006 15 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Shawn O. Pearce 提交于
If GIT_COMMITTER_NAME is not available in receive-pack but reflogs are enabled we would normally die out with an error message asking the user to correct their environment settings. Now that reflogs are enabled by default in (what we guessed to be) non-bare Git repositories this may cause problems for some users who don't have their full name in the gecos field and who don't have access to the remote system to correct the problem. So rather than die()'ing out in receive-pack when we try to log a ref change and have no committer name we default to the username, as obtained from the host's password database. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
When replacing an existing file A with a directory A that has a file A/B in it in the index, 'update-index --replace --add A/B' did not properly remove the file to make room for the new directory. There was a trivial logic error, most likely a cut & paste one, dating back to quite early days of git. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
When replacing an existing file A with a directory A that has a file A/B in it in the index, 'git add' did not succeed because it forgot to pass the allow-replace flag to add_cache_entry(). It might be safer to leave this as an error and require the user to explicitly remove the existing A first before adding A/B since it is an unusual case, but doing that automatically is much easier to use. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
When you remove a directory D that has a tracked file D/F out of the way to create a file D and try to "git update-index --add D", it used to say "cannot add" which was not very helpful. This issues an extra error message to explain the situation before the final "fatal" message. Since D/F conflicts are relatively rare event, extra verbosity would not make things too noisy. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Johannes Schindelin 提交于
When renaming a branch, the corresponding config section should be renamed, too. Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Johannes Schindelin 提交于
Given a config like this: # A config [very.interesting.section] not The command $ git repo-config --rename-section very.interesting.section bla.1 will lead to this config: # A config [bla "1"] not Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Finally. The separate-remote layout is so much more organized than traditional and easier to work with especially when you need to deal with remote repositories with multiple branches and/or you need to deal with more than one remote repositories, and using traditional layout for new repositories simply does not make much sense. Internally we still have code for 1:1 mappings to create a bare clone; that is a good thing and will not go away. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Now we lost the "first refspec is the one that is merged by default" rule, there is no reason for clone to list the remote primary branch in the config file explicitly anymore. We still need it for the traditional layout for other reasons, though. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Everybody hated the pull behaviour of merging the first branch listed on remotes/* file (or remote.*.fetch config) into the current branch. This finally corrects that UI wart by forbidding "git pull" without an explicit branch name on the command line or branch.$current.merge for the current branch. The matching change to git-clone was made to prepare the default branch.*.merge entry for the primary branch some time ago. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This stops enumerating the set of branches found on the remote side when a clone was made in the configuration file. Instead, a single entry that maps each remote branch to the local tracking branch for the remote under the same name is created. Doing it this way not only shortens the configuration file, but automatically adjusts to a new branch added on the remote side after the clone is made. Unfortunately this cannot be done for the traditional layout, where we always need to special case the 'master' to 'origin' mapping within the local branch namespace. But that is Ok; it will be going away before v1.5.0. We could also lose the "primary branch" mapping at the beginning, but that has to wait until we implement the "forbid 'git pull' when we do not have branch.$current.merge for the current branch" policy we earlier discussed. That should also be in v1.5.0 Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This hacks the input to fmt-merge-msg to make the message for merging early part of a branch a little easier to read. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Add a kind of "next" view in the bottom part of navigation bar for "commit" view, similar to what was added for "commitdiff" view in commit 151602df 'gitweb: Add "next" link to commitdiff view' For "commit" view for single parent commit: (parent: _commit_) For "commit" view for merge (multi-parent) commit: (merge: _commit_ _commit_ ...) For "commit" view for root (parentless) commit (initial) where _link_ denotes hyperlink. SHA1 of commit is shortened to 7 characters on display. While at it, remove leftovers from commit cae1862a by Petr Baudis: 'gitweb: More per-view navigation bar links' namely the "blame" link if there exist $file_name and commit has a parent; it was added in git_commit probably by mistake. The rest of what mentioned commit added for git_commit was removed in commit 6e0e92fd by Luben Tuikov: 'gitweb: Do not print "log" and "shortlog" redundantly in commit view' (which should have probably removed also this "blame" link removed now). Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Add title attribute, which will be shown as popup on mouseover in graphical web browsers, with full name of ref, including part (type) removed from the name of ref itself. This is useful to see that this strange ref is StGIT ref, or it is remote branch, or it is lightweigh tag (with branch-like name). Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Jakub Narebski 提交于
Do not show difftree against first parent for merges (commits with more than one parent) in "commit" view, because it usually is misleading. git-show and git-whatchanged doesn't show diff for merges either. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 16 12月, 2006 1 次提交
-
-
由 Johannes Schindelin 提交于
Most of this is derived from the documentation of RCS merge. Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-