Remove remaining double close(2)'s.  i.e. close() before
commit_locked_index() or commit_lock_file().
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

This inserts a new function xdi_diff() that currently does not
do anything other than calling the underlying xdl_diff() to the
callchain of current callers of xdl_diff() function.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NKristian Høgsberg <krh@redhat.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The code incorrectly assumed that strbuf.buf is always an
allocated piece of memory that has NUL at offset strbuf.len.
That assumption does not hold for a freshly initialized empty
strbuf.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

memory is now reused across hunks.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NPierre Habouzit <madcoder@debian.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

  * Add strbuf_rtrim to remove trailing spaces.
  * Add strbuf_insert to insert data at a given position.
  * Off-by one fix in strbuf_addf: strbuf_avail() does not counts the final
    \0 so the overflow test for snprintf is the strict comparison. This is
    not critical as the growth mechanism chosen will always allocate _more_
    memory than asked, so the second test will not fail. It's some kind of
    miracle though.
  * Add size extension hints for strbuf_init and strbuf_read. If 0, default
    applies, else:
      + initial buffer has the given size for strbuf_init.
      + first growth checks it has at least this size rather than the
        default 8192.
Signed-off-by: NPierre Habouzit <madcoder@debian.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NPierre Habouzit <madcoder@debian.org>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Make every builtin-*.c file #include "builtin.h".

Also takes care of some declaration/definition mismatches.
Signed-off-by: NPeter Hagervall <hager@cs.umu.se>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Two-file merges were rare enough that they were dropped outside of the
radar.  This fix is a trivial change to builtin-rerere.c::find_conflict().
It is still sane to insist that we do not do rerere for symlinks, and
require to have stages #2 and #3, but we can drop the requirement to have
stage #1. rerere does not use information from there anyway.

This fix is from Junio, together with two tests to verify that it works
as expected.
Acked-by: NUwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Earlier, "git rerere" was enabled by creating the directory
.git/rr-cache.  That is definitely not in line with most other
features, which are enabled by a config variable.

So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.

If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.

[jc: with minimum tweaks]
Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The instances of xdemitconf_t were initialized member by member.
Instead, initialize them to all zero, so we do not have
to update those places each time we introduce a new member.

[jc: minimally fixed by getting rid of a new global]
Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

I audited git for potential undetected write failures.
In the cases fixed below, the diagnostics I add mimic the diagnostics
used in surrounding code, even when that means not reporting
the precise strerror(errno) cause of the error.
Signed-off-by: NJim Meyering <jim@meyering.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time.  There are a few files that need
to have trailing whitespaces (most notably, test vectors).  The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The earlier code does not swap hunks when the beginning of the
first side is identical to the whole of the second side.  In
such a case, the first one should sort later.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

When a file has more then one conflicting hunks, it repeated the
contents of previous hunks in output for later ones.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Who would use multi-line symlinks that would benefit from rerere?
Just ignore them.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

The code forgot to take the for (;;) loop control into account,
incrementing the index once too many.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Previous step converted use of strncmp() with literal string
mechanically even when the result is only used as a boolean:

    if (!strncmp("foo", arg, 3)) ==> if (!(-prefixcmp(arg, "foo")))

This step manually cleans them up to read:

    if (!prefixcmp(arg, "foo"))
Signed-off-by: NJunio C Hamano <junkio@cox.net>

This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily.  Leftover from this will be fixed in a separate step, including
idiotic conversions like

    if (!strncmp("foo", arg, 3))

  =>

    if (!(-prefixcmp(arg, "foo")))

This was done by using this script in px.perl

   #!/usr/bin/perl -i.bak -p
   if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
           s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
   }
   if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
           s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
   }

and running:

   $ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: NJunio C Hamano <junkio@cox.net>

We have a number of badly checked write() calls.  Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes.  Switch to using
the new write_in_full().  Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().

Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NJunio C Hamano <junkio@cox.net>

There was an obvious thinko in memmove() to remove an entry that
was resolved from the in-core data structure.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

Two configuration to control the expiration of rerere records
are introduced and documented.
Signed-off-by: NJunio C Hamano <junkio@cox.net>

The perl version used modules which are non-standard in some setups.
This patch brings the full power of rerere to a wider audience.
Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: NJunio C Hamano <junkio@cox.net>