- 19 2月, 2007 3 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Fredrik Kuivinen 提交于
Similarly for i18n.logoutputencoding. Signed-off-by: NFredrik Kuivinen <frekui@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Fredrik Kuivinen 提交于
Otherwise "git rev-list --header HEAD" will not do the right thing if i18n.commitencoding is set. Signed-off-by: NFredrik Kuivinen <frekui@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 18 2月, 2007 4 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
git://git.kernel.org/pub/scm/gitk/gitk由 Junio C Hamano 提交于
* git://git.kernel.org/pub/scm/gitk/gitk: Make gitk save and restore window pane position on Linux and Cygwin. Make gitk save and restore the user set window position. [PATCH] gitk: Use show-ref instead of ls-remote [PATCH] Make gitk work reasonably well on Cygwin. [PATCH] gitk - remove trailing whitespace from a few lines. Change git repo-config to git config
-
由 Shawn O. Pearce 提交于
Since `git add` is the approved porcelain for an end-user to invoke when they want to manipulate the index, porcelain documentation should steer the user to this command rather than the pure plumbing update-index. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Shawn O. Pearce 提交于
It was mentioned on #git this morning that the lead-in description of git-rebase is very confusing. Too many branch this and branch that in a very short run of text. This new description attempts to walk the user through the command syntax, while also describing exactly what git-rebase is doing to their repository. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 17 2月, 2007 3 次提交
-
-
由 Junio C Hamano 提交于
When we do not trust executable bit from lstat(2), we copied existing ce_mode bits without checking if the filesystem object is a regular file (which is the only thing we apply the "trust executable bit" business) nor if the blob in the index is a regular file (otherwise, we should do the same as registering a new regular file, which is to default non-executable). Noticed by Johannes Sixt. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Tommi Kyntola 提交于
The 3rd branch in builtin-blame.c should also check for lacking arguments. Running that in top dir does not trigger the problem because the 'prefix' is NULL. Signed-off-by: NTommi Kyntola <tommi.kyntola@ray.fi> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
The shell loop to determine if we should skip the trivial in-index merge stage based on what strategy is given was not prepared to have more than one strategy listed in the variable $no_trivial_merge_strategies. This does not trigger unless you use a modified git but the fix is simple and straightforward, so let's fix it before 1.5.0.1. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 16 2月, 2007 1 次提交
-
-
由 Junio C Hamano 提交于
We stashed away objects that we pretend to have, but did not save the actual data. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 15 2月, 2007 12 次提交
-
-
由 Junio C Hamano 提交于
When somebody else extracts git tarball inside a larger project, 'git describe' would reported the version number of that upper level project. Sometimes, using the consistent versioning across subdirectories of a larger project is useful, but it may not always be the right thing to do. This changes the script to check ./vertion file first, and then fall back to "git describe". This way, by default, tarball distribution will get our own version. If the upper level wants to use consistent versioning across its subdirectories, its Makefile can overwrite ./version file to force whatever version number they want to give us before descending into us. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Alexandre Julliard 提交于
This ensures that a given area is mapped at most twice, and greatly reduces the virtual address space usage. Signed-off-by: NAlexandre Julliard <julliard@winehq.org> Acked-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Mark Levedahl 提交于
Subtle bugs remained on both Cygwin and Linux that caused the various window panes to be restored in positions different than where the user last placed them. Sergey Vlasov posed a pair of suggested fixes to this, what is done here is slightly different. The basic fix here involves a) explicitly remembering and restoring the sash positions for the upper window, and b) using paneconfigure to redundantly set height and width of other elements. This redundancy is needed as Cygwin Tcl has a nasty habit of setting pane sizes to zero if their slaves are not configured with a specific size, but Linux Tcl does not honor the specific size given. Signed-off-by: NMark Levedahl <mdl123@verizon.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Mark Levedahl 提交于
gitk was saving widget sizes and positions when the main window was destroyed, which is after all child widgets are destroyed. The cure is to trap the WM_DELETE_WINDOW event before the gui is torn down. Also, the saved geometry was captured using "winfo geometry .", rather than "wm geometry ." Under Linux, these two return different answers and the latter one is correct. [jc: credit goes to Brett Schwarz for suggesting the use of "wm protocol"; I also squashed the follow-up patch to remove extraneous -0 from expressions.] Signed-off-by: NMark Levedahl <mdl123@verizon.net> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
It used to be ls-remote on self was the only easy way to grab the ref information. Now we have show-ref which does not involve fork and IPC, so use it. Signed-off-by: NJunio C Hamano <junkio@cox.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Junio C Hamano 提交于
The gitk gui layout was completely broken on Cygwin. If gitk was started without previous geometry in ~/.gitk, the user could drag the window sashes to get a useable layout. However, if ~/.gitk existed, this was not possible at all. The fix was to rewrite makewindow, changing the toplevel containers and the particular geometry information saved between sessions. Numerous bugs in both the Cygwin and the Linux Tk versions make this a delicate balancing act: the version here works in both but many subtle variants are competely broken in one or the other environment. Three user visible changes result: 1 - The viewer is fully functional under Cygwin. 2 - The search bar moves from the bottom to the top of the lower left pane. This was necessary to get around a layout problem on Cygwin. 3 - The window size and position is saved and restored between sessions. Again, this is necessary to get around a layout problem on Cygwin. Signed-off-by: NMark Levedahl <mdl123@verizon.net> Signed-off-by: NJunio C Hamano <junkio@cox.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mark Levedahl 提交于
Signed-off-by: NMark Levedahl <mdl123@verizon.net> Signed-off-by: NJunio C Hamano <junkio@cox.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This is the gitk part of e0d10e1c from Tom Prince. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Junio C Hamano 提交于
The next patch depends on this. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
In the same spirit as commit 6fc66686, let's keep notes as we fix things. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
In cruft removal section we had a cruft we needed to remove. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Alexandre Julliard 提交于
This makes it possible to restart git-daemon even if some children are still running. Signed-off-by: NAlexandre Julliard <julliard@winehq.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 14 2月, 2007 13 次提交
-
-
由 Junio C Hamano 提交于
It was unclear if the backward compatible features were disabled or the configuration variables that controls them were set to false by default from the description. Obviously we meant the former, but the problem was made worse by the fact that one configuration variable breaks compatibility when set to true and the other one breaks it when set to false. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Old aliases are not linked to the main command list. Also the internal git-add--interactive does not need to be on the list. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
Update section about warning when leaving a detached head. Also fix a few indentations that weren't like the rest of the file. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
-
由 Junio C Hamano 提交于
This also adds a hook in the Makefile I can use to automatically include pointers to documentation for older releases when updating the pages at http://kernel.org/pub/software/scm/git/docs/. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
git://repo.or.cz/git-gui由 Junio C Hamano 提交于
* 'master' of git://repo.or.cz/git-gui: git-gui: fix typo in GIT-VERSION-GEN, "/dev/null" not "/devnull"
-
由 Junio C Hamano 提交于
The documentation still talked about the unnecessary 'safety' in git-checkout. Pointed out by Matthias Lederhofer. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Linus Torvalds 提交于
Here's a patch that I think we can merge right now. There may be other places that need this, but this at least points out the three places that read/write working tree files for git update-index, checkout and diff respectively. That should cover a lot of it [jc: git-apply uses an entirely different codepath both for reading and writing]. Some day we can actually implement it. In the meantime, this points out a place for people to start. We *can* even start with a really simple "we do CRLF conversion automatically, regardless of filename" kind of approach, that just look at the data (all three cases have the _full_ file data already in memory) and says "ok, this is text, so let's convert to/from DOS format directly". THAT somebody can write in ten minutes, and it would already make git much nicer on a DOS/Windows platform, I suspect. And it would be totally zero-cost if you just make it a config option (but please make it dynamic with the _default_ just being 0/1 depending on whether it's UNIX/Windows, just so that UNIX people can _test_ it easily). Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
Git isn't as stupid as it used to be Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Andy Parkins 提交于
In a repository with a large number of refs, the following command line could easily overflow the command line size limitations git-rev-list $newref $(git-rev-parse --not --all) Fortunately, git-rev-list already has the means to cope with this situation with the --stdin switch git-rev-parse --not --all | git-rev-list --stdin $newref Which is exactly what this patch does. Signed-off-by: NAndy Parkins <andyparkins@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Johannes Schindelin 提交于
The config variable gc.packrefs is tristate now: "true", "false" and "notbare", where "notbare" is the default. Signed-off-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 13 2月, 2007 4 次提交
-
-
由 Andy Parkins 提交于
Signed-off-by: NAndy Parkins <andyparkins@gmail.com> Signed-off-by: NShawn O. Pearce <spearce@spearce.org>
-
由 Junio C Hamano 提交于
Use the same --exclude-existing filter as we use for automatic tag following to avoid overwriting existing tags with replacement ones the other side created. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Similar to commit eb8381c8, we need to use for_each_reflog() to make sure we do not miss objects reachable from HEAD reflog. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-