- 07 10月, 2017 1 次提交
-
-
由 Jeff King 提交于
If our call to refs_read_raw_ref() fails, we check errno to see if the ref is simply missing, or if we encountered a more serious error. If it's just missing, then in "write" mode (i.e., when RESOLVE_REFS_READING is not set), this is perfectly fine. However, checking for ENOENT isn't sufficient to catch all missing-ref cases. In the filesystem backend, we may also see EISDIR when we try to resolve "a" and "a/b" exists. Likewise, we may see ENOTDIR if we try to resolve "a/b" and "a" exists. In both of those cases, we know that our resolved ref doesn't exist, but we return an error (rather than reporting the refname and returning a null sha1). This has been broken for a long time, but nobody really noticed because the next step after resolving without the READING flag is usually to lock the ref and write it. But in both of those cases, the write will fail with the same errno due to the directory/file conflict. There are two cases where we can notice this, though: 1. If we try to write "a" and there's a leftover directory already at "a", even though there is no ref "a/b". The actual write is smart enough to move the empty "a" out of the way. This is reasonably rare, if only because the writing code has to do an independent resolution before trying its write (because the actual update_ref() code handles this case fine). The notes-merge code does this, and before the fix in the prior commit t3308 erroneously expected this case to fail. 2. When resolving symbolic refs, we typically do not use the READING flag because we want to resolve even symrefs that point to unborn refs. Even if those unborn refs could not actually be written because of d/f conflicts with existing refs. You can see this by asking "git symbolic-ref" to report the target of a symref pointing past a d/f conflict. We can fix the problem by recognizing the other "missing" errnos and treating them like ENOENT. This should be safe to do even for callers who are then going to actually write the ref, because the actual writing process will fail if the d/f conflict is a real one (and t1404 checks these cases). Arguably this should be the responsibility of the files-backend to normalize all "missing ref" errors into ENOENT (since something like EISDIR may not be meaningful at all to a database backend). However other callers of refs_read_raw_ref() may actually care about the distinction; putting this into resolve_ref() is the minimal fix for now. The new tests in t1401 use git-symbolic-ref, which is the most direct way to check the resolution by itself. Interestingly we actually had a test that setup this case already, but we only used it to verify that the funny state could be overwritten, not that it could be resolved. We also add a new test in t3200, as "branch -m" was the original motivation for looking into this. What happens is this: 0. HEAD is pointing to branch "a" 1. The user asks to rename "a" to "a/b". 2. We create "a/b" and delete "a". 3. We then try to update any worktree HEADs that point to the renamed ref (including the main repo HEAD). To do that, we have to resolve each HEAD. But now our HEAD is pointing at "a", and we get EISDIR due to the loose "a/b". As a result, we think there is no HEAD, and we do not update it. It now points to the bogus "a". Interestingly this case used to work, but only accidentally. Before 31824d18 (branch: fix branch renaming not updating HEADs correctly, 2017-08-24), we'd update any HEAD which we couldn't resolve. That was wrong, but it papered over the fact that we were incorrectly failing to resolve HEAD. So while the bug demonstrated by the git-symbolic-ref is quite old, the regression to "branch -m" is recent. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 25 9月, 2017 1 次提交
-
-
由 Michael Haggerty 提交于
We're about to stop storing packed refs in a `ref_cache`. That means that the only way we have left to optimize `peel_ref()` is by checking whether the reference being peeled is the one currently being iterated over (in `current_ref_iter`), and if so, using `ref_iterator_peel()`. But this can be done generically; it doesn't have to be implemented per-backend. So implement `refs_peel_ref()` in `refs.c` and remove the `peel_ref()` method from the refs API. This removes the last callers of a couple of functions, so delete them. More cleanup to come... Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 24 9月, 2017 2 次提交
-
-
由 René Scharfe 提交于
This allows us to get rid of some write-only variables, among them seven SHA1 buffers. Signed-off-by: NRene Scharfe <l.s.r@web.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
Allow callers of refs_resolve_ref_unsafe() to pass NULL if they don't need the resolved hash value. We already allow the same for the flags parameter. This new leniency is inherited by the various wrappers like resolve_ref_unsafe(). Signed-off-by: NRene Scharfe <l.s.r@web.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 14 9月, 2017 4 次提交
-
-
由 Michael Haggerty 提交于
References are iterated over in order by refname, but reflogs are not. Some consumers of reference iteration care about the difference. Teach each `ref_iterator` to keep track of whether its output is ordered. `overlay_ref_iterator` is one of the picky consumers. Add a sanity check in `overlay_ref_iterator_begin()` to verify that its inputs are ordered. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
The return value of write_in_full() is either "-1", or the requested number of bytes[1]. If we make a partial write before seeing an error, we still return -1, not a partial value. This goes back to f6aa66cb (write_in_full: really write in full or return error on disk full., 2007-01-11). So checking anything except "was the return value negative" is pointless. And there are a couple of reasons not to do so: 1. It can do a funny signed/unsigned comparison. If your "len" is signed (e.g., a size_t) then the compiler will promote the "-1" to its unsigned variant. This works out for "!= len" (unless you really were trying to write the maximum size_t bytes), but is a bug if you check "< len" (an example of which was fixed recently in config.c). We should avoid promoting the mental model that you need to check the length at all, so that new sites are not tempted to copy us. 2. Checking for a negative value is shorter to type, especially when the length is an expression. 3. Linus says so. In d34cf19b (Clean up write_in_full() users, 2007-01-11), right after the write_in_full() semantics were changed, he wrote: I really wish every "write_in_full()" user would just check against "<0" now, but this fixes the nasty and stupid ones. Appeals to authority aside, this makes it clear that writing it this way does not have an intentional benefit. It's a historical curiosity that we never bothered to clean up (and which was undoubtedly cargo-culted into new sites). So let's convert these obviously-correct cases (this includes write_str_in_full(), which is just a wrapper for write_in_full()). [1] A careful reader may notice there is one way that write_in_full() can return a different value. If we ask write() to write N bytes and get a return value that is _larger_ than N, we could return a larger total. But besides the fact that this would imply a totally broken version of write(), it would already invoke undefined behavior. Our internal remaining counter is an unsigned size_t, which means that subtracting too many byte will wrap it around to a very large number. So we'll instantly begin reading off the end of the buffer, trying to write gigabytes (or petabytes) of data. Signed-off-by: NJeff King <peff@peff.net> Reviewed-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Stefan Beller 提交于
Pass DO_FOR_EACH_INCLUDE_BROKEN when iterating over replacement refs so that the iteration does not require opening the named objects from the object store. This avoids a dependency cycle between object access and replace ref iteration. Moreover the ref subsystem has not been migrated yet to access the object store via passed in repository objects. As a result, without this patch, iterating over replace refs in a repository other than the_repository it produces errors: error: refs/replace/3afabef75c627b894cccc3bcae86837abc7c32fe does not point to a valid object! Noticed while adapting the object store (and in particular its evaluation of replace refs) to handle arbitrary repositories. Signed-off-by: NStefan Beller <sbeller@google.com> Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Gummerer 提交于
Callers are only allowed to pass certain flags into ref_transaction_update, other flags are internal to it. To prevent mistakes from the callers, strip the internal only flags out before continuing. This was noticed because of a compiler warning gcc 7.1.1 issued about passing a NULL parameter as second parameter to memcpy (through hashcpy): In file included from refs.c:5:0: refs.c: In function ‘ref_transaction_verify’: cache.h:948:2: error: argument 2 null where non-null expected [-Werror=nonnull] memcpy(sha_dst, sha_src, GIT_SHA1_RAWSZ); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from git-compat-util.h:165:0, from cache.h:4, from refs.c:5: /usr/include/string.h:43:14: note: in a call to function ‘memcpy’ declared here extern void *memcpy (void *__restrict __dest, const void *__restrict __src, ^~~~~~ The call to hascpy in ref_transaction_add_update is protected by the passed in flags, but as we only add flags there, gcc notices REF_HAVE_NEW or REF_HAVE_OLD flags could be passed in from the outside, which would potentially result in passing in NULL as second parameter to memcpy. Fix both the compiler warning, and make the interface safer for its users by stripping the internal flags out. Suggested-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NThomas Gummerer <t.gummerer@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 07 9月, 2017 1 次提交
-
-
由 Rene Scharfe 提交于
Signed-off-by: NRene Scharfe <l.s.r@web.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 25 8月, 2017 9 次提交
-
-
由 Nguyễn Thái Ngọc Duy 提交于
With the new "if (!submodule) return NULL;" code added in the previous commit, we don't need to check if submodule is not NULL anymore. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
At this state, there are three get_submodule_ref_store() callers: - for_each_remote_ref_submodule() - handle_revision_pseudo_opt() - resolve_gitlink_ref() The first two deal explicitly with submodules (and we should never fall back to the main ref store as a result). They are only called from submodule.c: - find_first_merges() - submodule_needs_pushing() - push_submodule() The last one, as its name implies, deals only with submodules too, and the "submodule" (path) argument must be a non-NULL, non-empty string. So, this "if NULL or empty string" code block should never ever trigger. And it's wrong to fall back to the main ref store anyway. Delete it. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
These are used in revision.c. After the last patch they are replaced with the refs_ version. Delete them. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
This is a better place that will benefit all submodule callers instead of just resolve_gitlink_ref() Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
The "submodule" argument in this function is a path, which can have either '/' or '\\' as a separator. Use is_dir_sep() to support both. Noticed-by: NJohannes Sixt <j6t@kdbg.org> Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 24 8月, 2017 1 次提交
-
-
由 Michael Haggerty 提交于
The philosophy of reference locking has been, "if another process is changing a reference, then whatever I'm trying to do to it will probably fail anyway because my old-SHA-1 value is probably no longer current". But this argument falls down if the other process has locked the reference to do something that doesn't actually change the value of the reference, such as `pack-refs` or `reflog expire`. There actually *is* a decent chance that a planned reference update will still be able to go through after the other process has released the lock. So when trying to lock an individual reference (e.g., when creating "refs/heads/master.lock"), if it is already locked, then retry the lock acquisition for approximately 100 ms before giving up. This should eliminate some unnecessary lock conflicts without wasting a lot of time. Add a configuration setting, `core.filesRefLockTimeout`, to allow this setting to be tweaked. Note: the function `get_files_ref_lock_timeout_ms()` cannot be private to the files backend because it is also used by `write_pseudoref()` and `delete_pseudoref()`, which are defined in `refs.c` so that they can be used by other reference backends. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 25 7月, 2017 1 次提交
-
-
由 Christian Couder 提交于
This is shorter, makes the logic a bit easier to follow, and is perhaps a bit faster too. The logic is to make the final decision only when "subject" is there, its early part matches "match", and the match is at the slash boundary (or the whole thing). Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Reviewed-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 18 7月, 2017 1 次提交
-
-
由 brian m. carlson 提交于
Convert the flags for get_oid_with_context and friends to use "OID" instead of "SHA1" in their names. This transform was made by running the following one-liner on the affected files: perl -pi -e 's/GET_SHA1/GET_OID/g' Signed-off-by: Nbrian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 01 7月, 2017 1 次提交
-
-
由 Stefan Beller 提交于
When using the hashmap a common need is to have access to caller provided data in the compare function. A couple of times we abuse the keydata field to pass in the data needed. This happens for example in patch-ids.c. This patch changes the function signature of the compare function to have one more void pointer available. The pointer given for each invocation of the compare function must be defined in the init function of the hashmap and is just passed through. Documentation of this new feature is deferred to a later patch. This is a rather mechanical conversion, just adding the new pass-through parameter. However while at it improve the naming of the fields of all compare functions used by hashmaps by ensuring unused parameters are prefixed with 'unused_' and naming the parameters what they are (instead of 'unused' make it 'unused_keydata'). Signed-off-by: NStefan Beller <sbeller@google.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 24 6月, 2017 2 次提交
-
-
由 Ævar Arnfjörð Bjarmason 提交于
Remove the unused wildopts placeholder struct from being passed to all wildmatch() invocations, or rather remove all the boilerplate NULL parameters. This parameter was added back in commit 9b3497ca ("wildmatch: rename constants and update prototype", 2013-01-01) as a placeholder for future use. Over 4 years later nothing has made use of it, let's just remove it. It can be added in the future if we find some reason to start using such a parameter. Signed-off-by: NÆvar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Haggerty 提交于
Now that the interface between `files_ref_store` and `packed_ref_store` is relatively narrow, move the latter into a new module, "refs/packed-backend.h" and "refs/packed-backend.c". It still doesn't quite implement the `ref_store` interface, but it will soon. This commit moves code around and adjusts its visibility, but doesn't change anything. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 19 6月, 2017 2 次提交
-
-
由 Michael Haggerty 提交于
`for_each_bisect_ref()` is called by `for_each_bad_bisect_ref()` with a term "bad". This used to make it call `for_each_ref_in_submodule()` with a prefix "refs/bisect/bad". But the latter is the name of the reference that is being sought, so the empty string was being passed to the callback as the trimmed refname. Moreover, this questionable practice was turned into an error by b9c8e7f2 prefix_ref_iterator: don't trim too much, 2017-05-22 It makes more sense (and agrees better with the documentation of `--bisect`) for the callers to receive the full reference names. So * Add a new function, `for_each_fullref_in_submodule()`, to the refs API. This plugs a gap in the existing functionality, analogous to `for_each_fullref_in()` but accepting a `submodule` argument. * Change `for_each_bad_bisect_ref()` to call the new function rather than `for_each_ref_in_submodule()`. * Add a test. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Sahil Dua 提交于
Add the ability to --copy a branch and its reflog and configuration, this uses the same underlying machinery as the --move (-m) option except the reflog and configuration is copied instead of being moved. This is useful for e.g. copying a topic branch to a new version, e.g. work to work-2 after submitting the work topic to the list, while preserving all the tracking info and other configuration that goes with the branch, and unlike --move keeping the other already-submitted branch around for reference. Like --move, when the source branch is the currently checked out branch the HEAD is moved to the destination branch. In the case of --move we don't really have a choice (other than remaining on a detached HEAD) and in order to keep the functionality consistent, we are doing it in similar way for --copy too. The most common usage of this feature is expected to be moving to a new topic branch which is a copy of the current one, in that case moving to the target branch is what the user wants, and doesn't unexpectedly behave differently than --move would. One outstanding caveat of this implementation is that: git checkout maint && git checkout master && git branch -c topic && git checkout - Will check out 'maint' instead of 'master'. This is because the @{-N} feature (or its -1 shorthand "-") relies on HEAD reflogs created by the checkout command, so in this case we'll checkout maint instead of master, as the user might expect. What to do about that is left to a future change. Helped-by: NÆvar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: NÆvar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: NSahil Dua <sahildua2305@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 16 6月, 2017 1 次提交
-
-
由 Brandon Williams 提交于
Stop including config.h by default in cache.h. Instead only include config.h in those files which require use of the config system. Signed-off-by: NBrandon Williams <bmwill@google.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 23 5月, 2017 9 次提交
-
-
由 Michael Haggerty 提交于
Instead of handling `GIT_REF_PARANOIA` in `files_ref_iterator_begin()`, handle it in `refs_ref_iterator_begin()`, where it will cover all reference stores. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Haggerty 提交于
It's pretty cheap to make sure that the caller didn't pass us an unsorted list by accident, so do so. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Haggerty 提交于
Eliminate a theoretical risk of integer overflow if the two types have different sizes. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Haggerty 提交于
It will soon have some other users. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Haggerty 提交于
In the future, compound reference stores will sometimes need to modify references in two different reference stores at the same time, meaning that a single logical reference transaction might have to be implemented as two internal sub-transactions. They won't want to call `ref_transaction_commit()` for the two sub-transactions one after the other, because that wouldn't be atomic (the first commit could succeed and the second one fail). Instead, they will want to prepare both sub-transactions (i.e., obtain any necessary locks and do any pre-checks), and only if both prepare steps succeed, then commit both sub-transactions. Start preparing for that day by adding a new, optional `ref_transaction_prepare()` step to the reference transaction sequence, which obtains the locks and does any prechecks, reporting any errors that occur. Also add a `ref_transaction_abort()` function that can be used to abort a sub-transaction even if it has already been prepared. That is on the side of the public-facing API. On the side of the `ref_store` VTABLE, get rid of `transaction_commit` and instead add methods `transaction_prepare`, `transaction_finish`, and `transaction_abort`. A `ref_transaction_commit()` now basically calls methods `transaction_prepare` then `transaction_finish`. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Haggerty 提交于
Move the check that `transaction->state` is valid from `files_transaction_commit()` to `ref_transaction_commit()`, where other future reference backends can benefit from it as well. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Haggerty 提交于
Just because the files backend can't retain reflogs for deleted references is no reason that they shouldn't be supported by the virtual method interface. Also, `delete_ref()` and `refs_delete_ref()` have already gained `msg` parameters. Now let's add them to `delete_refs()` and `refs_delete_refs()`. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Haggerty 提交于
Eliminate any chance of integer overflow on platforms where the two types have different sizes. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Michael Haggerty 提交于
The backend already correctly restricts its output to references whose names start with the prefix. By passing the prefix again to `prefix_ref_iterator`, we were forcing that iterator to do redundant prefix comparisons. So set it to the empty string. Signed-off-by: NMichael Haggerty <mhagger@alum.mit.edu> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 08 5月, 2017 1 次提交
-
-
由 brian m. carlson 提交于
Convert struct ref_array_item to use struct object_id by changing the definition and applying the following semantic patch, plus the standard object_id transforms: @@ struct ref_update E1; @@ - E1.new_sha1 + E1.new_oid.hash @@ struct ref_update *E1; @@ - E1->new_sha1 + E1->new_oid.hash @@ struct ref_update E1; @@ - E1.old_sha1 + E1.old_oid.hash @@ struct ref_update *E1; @@ - E1->old_sha1 + E1->old_oid.hash This transformation allows us to convert write_ref_to_lockfile, which is required to convert parse_object. Signed-off-by: Nbrian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 27 4月, 2017 1 次提交
-
-
由 Johannes Schindelin 提交于
Git's source code assumes that unsigned long is at least as precise as time_t. Which is incorrect, and causes a lot of problems, in particular where unsigned long is only 32-bit (notably on Windows, even in 64-bit versions). So let's just use a more appropriate data type instead. In preparation for this, we introduce the new `timestamp_t` data type. By necessity, this is a very, very large patch, as it has to replace all timestamps' data type in one go. As we will use a data type that is not necessarily identical to `time_t`, we need to be very careful to use `time_t` whenever we interact with the system functions, and `timestamp_t` everywhere else. Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 25 4月, 2017 2 次提交
-
-
由 Nguyễn Thái Ngọc Duy 提交于
files-backend at this point is still aware of the per-repo/worktree separation in refs, so it can handle a linked worktree. Some refs operations are known not working when current files-backend is used in a linked worktree (e.g. reflog). Tests will be written when refs_* functions start to be called with worktree backend to verify that they work as expected. Note: accessing a worktree of a submodule remains unaddressed. Perhaps after get_worktrees() can access submodule (or rather a new function get_submodule_worktrees(), that lists worktrees of a submodule), we can update this function to work with submodules as well. Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-