- 10 12月, 2008 5 次提交
-
-
由 Jeff King 提交于
Currently we just skip rewrite diffs for binary files; this patch makes an exception for files which will be textconv'd, and actually performs the textconv before generating the diff. Conceptually, rewrite diffs should be in the exact same format as the a non-rewrite diff, except that we refuse to share any context. Thus it makes very little sense for "git diff" to show a textconv'd diff, but for "git diff -B" to show "Binary files differ". Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
The current emit_rewrite_diff code always writes a text patch without checking whether the content is binary. This means that if you end up with a rewrite diff for a binary file, you get lots of raw binary goo in your patch. Instead, if we have binary files, then let's just skip emit_rewrite_diff altogether. We will already have shown the "dissimilarity index" line, so it is really about the diff contents. If binary diffs are turned off, the "Binary files a/file and b/file differ" message should be the same in either case. If we do have binary patches turned on, there isn't much point in making a less-efficient binary patch that does a total rewrite; no human is going to read it, and since binary patches don't apply with any fuzz anyway, the result of application should be the same. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Alexander Potashev 提交于
Signed-off-by: NAlexander Potashev <aspotashev@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Tor Arvid Lund 提交于
Unfortunately, I introduced a bug in commit 7f705dc3 (git-p4: Fix bug in p4Where method). This happens because sometimes the result from "p4 where <somepath>" doesn't contain a "depotFile" key, but instead a "data" key that needs further parsing. This commit should ensure that both of these cases are checked. Signed-off-by: NTor Arvid Lund <torarvid@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ralf Wildenhues 提交于
Improve some minor language and format issues like hyphenation, phrases, spacing, word order, comma, attributes. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 09 12月, 2008 2 次提交
-
-
由 Alexey Borzenkov 提交于
Starting with asciidoc 8.3.0 linkgit macro is no longer recognized by asciidoc and user guide suggests (http://www.methods.co.nz/asciidoc/userguide.html#_macro_definitions) that macros are supposed to be defined in [macros] section. I'm not sure whether undefined linkgit macro was working by pure chance or it is a regression in asciidoc 8.3.0, but this patch adds proper definition for the linkgit macro, allowing it to work on 8.3.0. Signed-off-by: NAlexey Borzenkov <snaury@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jakub Narebski 提交于
In insert_file() subroutine (which is used to insert HTML fragments as custom header, footer, hometext (for projects list view), and per project README.html (for summary view)) we used: map(to_utf8, <$fd>); This doesn't work, and other form has to be used: map { to_utf8($_) } <$fd>; Now with test for t9600 added, for $GIT_DIR/README.html. Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 08 12月, 2008 10 次提交
-
-
由 Jeff King 提交于
Some history viewers use the diff plumbing to generate diffs rather than going through the "git diff" porcelain. Currently, there is no way for them to specify that they would like to see the text-converted version of the diff. This patch adds a "--textconv" option to allow such a plumbing user to allow text conversion. The user can then tell the viewer whether or not they would like text conversion enabled. While it may be tempting add a configuration option rather than requiring each plumbing user to be configured to pass --textconv, that is somewhat dangerous. Text-converted diffs generally cannot be applied directly, so each plumbing user should "opt in" to generating such a diff, either by explicit request of the user or by confirming that their output will not be fed to patch. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jeff King 提交于
Right now for the diff porcelain and the log family, we call: init_revisions(); setup_revisions(); DIFF_OPT_SET(ALLOW_TEXTCONV); However, that means textconv will _always_ be on, instead of being a default that can be manipulated with setup_revisions. Instead, we want: init_revisions(); DIFF_OPT_SET(ALLOW_TEXTCONV); setup_revisions(); which is what this patch does. We'll go ahead and move the callsite in wt-status, also; even though the user can't pass any options here, it is a cleanup that will help avoid any surprise later if the setup_revisions line is changed. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
This reverts commit 757c7f60 as an unnecessary error message to pop up when the last stash entry is dropped. It simply is not worth the aggravation.
-
由 Junio C Hamano 提交于
A handful of fixes have been backmerged to 'maint' and are now contained in 1.6.0.X series as the result, so drop them from this document. Also contains typofix and duplicate removal pointed out by Bjørn Lindeijer and Jakub Narebski. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* maint: GIT 1.6.0.5 "git diff <tree>{3,}": do not reverse order of arguments tag: delete TAG_EDITMSG only on successful tag gitweb: Make project specific override for 'grep' feature work http.c: use 'git_config_string' to get 'curl_http_proxy' fetch-pack: Avoid memcpy() with src==dst
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Matt McCutchen 提交于
According to the message of commit 0fe7c1de, "git diff" with three or more trees expects the merged tree first followed by the parents, in order. However, this command reversed the order of its arguments, resulting in confusing diffs. A comment /* Again, the revs are all reverse */ suggested there was a reason for this, but I can't figure out the reason, so I removed the reversal of the arguments. Test case included. Signed-off-by: NMatt McCutchen <matt@mattmccutchen.net> Signed-off-by: NShawn O. Pearce <spearce@spearce.org>
-
- 07 12月, 2008 4 次提交
-
-
由 Jeff King 提交于
The user may put some effort into writing an annotated tag message. When the tagging process later fails (which can happen fairly easily, since it may be dependent on gpg being correctly configured and used), there is no record left on disk of the tag message. Instead, let's keep the TAG_EDITMSG file around until we are sure the tag has been created successfully. If we die because of an error, the user can recover their text from that file. Leaving the file in place causes no conflicts; it will be silently overwritten by the next annotated tag creation. This matches the behavior of COMMIT_EDITMSG, which stays around in case of error. Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jakub Narebski 提交于
The 'grep' feature was marked in the comments as having project specific config, but it lacked 'sub' key required for it to work. Kind-of-Noticed-by: NMatt Kraai <kraai@ftbfs.org> Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Miklos Vajna 提交于
Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Rast 提交于
memcpy() may only be used for disjoint memory areas, but when invoked from cmd_fetch_pack(), we have my_args == &args. (The argument cannot be removed entirely because transport.c invokes with its own variable.) Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 06 12月, 2008 3 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* jc/am-options: git-am: rename apply_opt_extra file to apply-opt Test that git-am does not lose -C/-p/--whitespace options git-am: propagate --3way options as well git-am: propagate -C<n>, -p<n> options as well git-am --whitespace: do not lose the command line option
-
由 Junio C Hamano 提交于
All other state files use dash in their names, not underscores. Also, there is no reason to call this "extra". Drop it. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 05 12月, 2008 8 次提交
-
-
由 Junio C Hamano 提交于
These tests make sure that "git am" does not lose command line options specified when it was started, after it is interrupted by a patch that does not apply earlier in the series. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
The reasoning is the same as the previous patch, where we made -C<n> and -p<n> propagate across a failure. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
These options are meant to deal with patches that do not apply cleanly due to the differences between the version the patch was based on and the version "git am" is working on. Because a series of patches applied in the same "git am" run tends to come from the same source, it is more useful to propagate these options after the application stops. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
When you start "git am --whitespace=fix" and the patch application process is interrupted by an unapplicable patch early in the series, after fixing the offending patch, the remainder of the patch should be processed still with --whitespace=fix when restarted with "git am --resolved" (or dropping the offending patch with "git am --skip"). The breakage was introduced by the commit 67dad687 (add -C[NUM] to git-am, 2007-02-08); this should fix it. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Tor Arvid Lund 提交于
When running: p4 where //depot/SomePath/... The result can in some situations look like: //depot/SomePath/... //client/SomePath/... /home/user/p4root/SomePath/... -//depot/SomePath/UndesiredSubdir/... //client/SomePath/UndesiredSubdir/... /home/user/p4root/SomePath/UndesiredSubdir/... This depends on the users Client view. The current p4Where method will now return /home/user/p4root/SomePath/UndesiredSubdir/... which is not what we want. This patch loops through the results from "p4 where", and picks the one where the depotFile exactly matches the given depotPath (//depot/SomePath/... in this example). Signed-off-by: NTor Arvid Lund <torarvid@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Alex Riesen 提交于
Signed-off-by: NAlex Riesen <raa.lkml@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Alex Riesen 提交于
Signed-off-by: NAlex Riesen <raa.lkml@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Alex Riesen 提交于
So that full filesystem conditions or permissions problems won't go unnoticed. Signed-off-by: NAlex Riesen <raa.lkml@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 04 12月, 2008 8 次提交
-
-
由 Junio C Hamano 提交于
* dm/svn-remote: git-svn: Make branch use correct svn-remote
-
由 Junio C Hamano 提交于
* jn/gitweb-utf8: gitweb: Fix handling of non-ASCII characters in inserted HTML files
-
由 Jeff King 提交于
This is a generated builtin since 24b1f65f (Install git-stage in exec-path). Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Miklos Vajna 提交于
Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Miklos Vajna 提交于
Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Miklos Vajna 提交于
Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Miklos Vajna 提交于
Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Miklos Vajna 提交于
Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-