- 14 12月, 2005 9 次提交
-
-
由 freku045@student.liu.se 提交于
Signed-off-by: NFredrik Kuivinen <freku045@student.liu.se> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 freku045@student.liu.se 提交于
Signed-off-by: NFredrik Kuivinen <freku045@student.liu.se> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Fredrik Kuivinen 提交于
There were some problems with the usage message clean-up patch series. I hadn't realised that subdirectory aware scripts can't source git-sh-setup. I propose that we change this and let the scripts which are subdirectory aware set a variable, SUBDIRECTORY_OK, before they source git-sh-setup. The scripts will also set USAGE and possibly LONG_USAGE before they source git-sh-setup. If LONG_USAGE isn't set it defaults to USAGE. If we go this way it's easy to catch --help in git-sh-setup, print the (long) usage message to stdout and exit cleanly. git-sh-setup can define a 'usage' shell function which can be called by the scripts to print the short usage string to stderr and exit non-cleanly. It will also be easy to change $0 to basename $0 or something else, if would like to do that sometime in the future. What follows is a patch to convert a couple of the commands to this style. If it's ok with everyone to do it this way I will convert the rest of the scripts too. [jc: thrown in to proposed updates queue for comments.] Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Talk about the following as well: * git fetch --tags * Use of "git push" as a one-man distributed development vehicle. * Show example of remotes file for pulling and pushing. * Annotate git-shell setup. * Using Carl's update hook in a CVS-style shared repository. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
3bd348ae commit broke checking out specific paths. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Petr Baudis 提交于
In case some refs couldn't be pushed out due to an error (mostly the not-a-proper-subset error), make git-send-pack exit with non-zero status after the push is over (that is, it still tries to push out the rest of the refs). [jc: I adjusted a test for this change.] Signed-off-by: NPetr Baudis <pasky@suse.cz> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Although "git-merge" is advertised as the end-user level command (instead of being a "git-pull" backend), it was not prepared to take tag objects that point at commits and barfed when fed one. Sanitize the input while we validate them, for which we already have a loop. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
When clone-pack has trouble with the remote, it dies unfriendly "EOF" error message. We cannot tell the reason why it failed from the local end; it could be that the repository did not exist, or configured not to serve over git-daemon, or a network failure. At least, saying clone-pack failed makes it a bit more meaningful. I am not convinced yet that removing the newly created directory is the right thing to do, so this commit leaves the new directory behind. Reported by Sam Ravnborg. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 13 12月, 2005 12 次提交
-
-
由 Junio C Hamano 提交于
The initial section of tutorial was too heavy on internal workings for the first-time readers, so rewrite the introductory section of git(7) to start with "not learning core git commands" section and refer them to README to grasp the basic concepts, then Everyday to give overview with task/role oriented examples for minimum set of commands, and finally the tutorial. Also add to existing note in the tutorial that many too technical descriptions can be skipped by a casual reader. I initially started to review the tutorial, with the objective of ripping out the detailed technical information altogether, but I found that the level of details in the initial couple of sections that talk about refs and the object database in a hands-on fashion was about rigth, and left all of them there. I feel that reading about fsck-index and repack is too abstract without being aware of these directories and files. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Also move pack protocol description to technical/. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Somehow we checked only one side and not the other. By checking the filesize upfront, we can bypass generating delta unnecessarily. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This reverts e726715a commit, because reverting diff-delta emptiness change would break this test.
-
由 Junio C Hamano 提交于
This reverts 962537a3 commit to play safe.
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Delta computation with an empty blob used to punt and returned NULL. This commit allows creation with empty blob; all combination of empty->empty, empty->something, and something->empty are allowed. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This test kicks in only if you built test-delta executable, and makes sure that the basic delta routine is working properly even on empty files. This commit is to make sure we have a test to catch the breakage. The delitifier code is still broken, which will be fixed with the next commit. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This bug caused Darrin Thompson to notice that our deltifier was half broken and punting on an empty blob. Signed-off-by: NJunio C Hamano <junio@twinsun.com>
-
- 12 12月, 2005 1 次提交
-
-
由 Junio C Hamano 提交于
This adds a couple of tests to cover the following renaming merge cases: - one side renames and the other side does not, with and without content conflicts. - both side rename to the same path, with and without content conflicts. The test setup also prepares a case in which both side rename to different destination, but currently the code collapses these destination paths and removes the original path, which may be wrong. The outcome of this case is not checked by the tests in this round. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 11 12月, 2005 15 次提交
-
-
由 Junio C Hamano 提交于
Fredrik points out there is a useful wrapper runProgram() used everywhere that we can use to feed input into subprocess. Use it to catch errors from the subprocess; it is a good cleanup as well. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This does two things. - When one branch renamed and the other branch did not, the resulting half-merged file in the working tree used to swap branches around and showed as if renaming side was "ours". This was confusing and inconsistent (even though the conflict markers were marked with branch names, it was not a good enough excuse). This changes the order of arguments to mergeFile in such a case to make sure we always see "our" change between <<< and ===, and "their" change between === and >>>. - When both branches renamed to the same path, and when one branch renamed and the other branch did not, we attempt mergeFile. When this automerge conflicted, we used to collapse the index. Now we use update-index --index-info to inject higher stage entries to leave the index in unmerged state for these two cases. What this still does _not_ do is to inject unmerged state into the index when the structural changes conflict. I have not thought things through what to do in each case yet, but the cases this commit cover are the most common ones, so this would be a good start. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This would help sorting by subject in MUA work saner even though MUA is too dumb to attempt sorting numbered subjects sanely. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
People seem to be getting test failure from t6021 not becuase git is faulty but because they forgot to install "merge". Check this and other trivial pilot errors in the first test. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Add double quote character to the test pattern. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Daniel Barkalow 提交于
In order to support getting data into git with scripts, this adds a --stdin option to git-hash-object, which will make it read from stdin. Signed-off-by: NDaniel Barkalow <barkalow@iabervon.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Eric Wong 提交于
Fix a stupid bug I introduced when splitting the accurate and fast changeset appliers. Also, remove an old debugging statement I added Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
-
由 Eric Wong 提交于
This fixes the case (that worked originally in Martin's version) where the only new/modified files are Arch control files. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
-
由 Eric Wong 提交于
And make it the default. This includes stats tracking to verbose mode Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
-
由 Eric Wong 提交于
Better logfile parsing, no longer confused by 'headers' after the first blank line. Re-enabled tag-reading with abrowse (baz and tla compatible) Remove need to quote args to external processes Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
-
由 Eric Wong 提交于
add -D <depth> option to abrowse add -a switch to attempt to auto-register archives at mirrors.sourcecontrol.net (ML: Also removes some std libraries no longer in use) Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
-
由 Eric Wong 提交于
use git-diff-files instead of git diff-files so we don't rely on the wrapper being installed (some people may have git as GNU interactive tools :) Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
-
由 Eric Wong 提交于
set TMPDIR env correctly if -t <tmpdir> is passed from the command-line. setting TMPDIR => 1 as an argument to tempdir() has no effect otherwise Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
-
由 Eric Wong 提交于
use safe_pipe_capture() or system() over backticks where shellquoting may have been necessary. More changes planned, so I'm not touching the parts I'm planning on replacing entirely. Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
-
由 Eric Wong 提交于
(ML: And introduce safe_pipe_capture()) Signed-off-by: NEric Wong <normalperson@yhbt.net> Signed-off-by: NMartin Langhoff <martin@catalyst.net.nz>
-
- 10 12月, 2005 3 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This is just a belts-and-suspenders check, but makes sure we have both "git" and "git-init-db" built, executable, and checking. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-