- 18 5月, 2009 3 次提交
-
-
由 Christian Couder 提交于
We must save the pending commits that will be used during revision walking and unparse them after, because we want to leave a clean state for the next revision walking that will try to find the best bisection point. As we don't fork a process anymore to call "git rev-list", we need to remove the use of GIT_TRACE to check how "git rev-list" is called from the t6030 test that uses it. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
This patch adds the "unparse_commit" function that returns a commit into an unparsed state by freeing its data and resetting its fields to 0. Its parents are recursively unparsed too, because they might have been changed. But its tree is not unparsed as it should not have been modifed. Note that as the "flags" and "used" fields may be used even if the object is not parsed, we have to reset them anyway. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
This patches changes the "bisect_rev_setup" and "bisect_common" functions to make it easier to reuse them in a later patch. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 11 5月, 2009 10 次提交
-
-
由 Christian Couder 提交于
This patch replace the "--next-exit" option of "git bisect--helper" with a "--next-all" option that does merge base checking using the "check_good_are_ancestors_of_bad" function implemented in "bisect.c" in a former patch. The new "--next-all" option is then used in "git-bisect.sh" instead of the "--next-exit" option, and all the shell functions in "git-bisect.sh" that are now unused are removed. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
This is a port of the function with the same name that is in "git-bisect.sh". The new function is not used yet but will be in a later patch. We also implement an helper "check_ancestors" function that use "start_command" and "finish_command" to launch "git rev-list $good ^$bad". Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
And all functions needed to make it work. This is a port from the shell function with the same name "git-bisect.sh". This function is not used yet but it will be used later. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
This makes sha1_array easier to use, so later patches will be simpler. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
So they can be used on the good array too. This is done by renaming many functions and some variables to remove "skip" in the name, and by adding a "struct sha1_array *array" argument where needed. While at it, make the second argument to "lookup_sha1_array" const. It becomes "const unsigned char *sha1". Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
This patch moves some function calls into "bisect_next_exit" so that functions are nesting less. The call to "bisect_rev_setup" is moved from "bisect_common" into "bisect_next_exit" and the call to "read_bisect_refs" from "bisect_rev_setup" into "bisect_next_exit". While at it, "rev_argv" is moved into "bisect_rev_setup". This will make it easier and cleaner to implement checking merge bases. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
Because we will use other instances of this struct. The "rev_argv_push" function is changed into 2 functions "argv_array_push" and "argv_array_push_sha1" that take a "struct argv_array *" as first argument. And these functions are used to simplify "bisect_rev_setup". Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
This will make it easier to use good revisions for checking merge bases later. To simplify the code, a new "sha1_array_push" function is also introduced. And while at it we move the earlier part of the code to fill the argv that is passed to "setup_revisions", so that all this code is now completely after "read_bisect_refs". Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
This patch is a minor clean up right now, but the new function will evolve and be used more later. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
This patch creates a "struct sha1_array" to store skipped revisions, so that the same struct can be reused in a later patch for good revisions. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 10 5月, 2009 10 次提交
-
-
由 Christian Couder 提交于
Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
As the "sq" function was the only place using Perl in "git-bisect.sh", this removes the Perl dependency in this script. While at it, we also remove the sed instruction in the Makefile that substituted @@PERL@@ with the Perl path in shell scripts, as this is not needed anymore. (It is now only needed in "git-instaweb.sh" but this command is dealt with separately in the Makefile.) Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
Because it was used only by "git bisect--helper --next-vars" but the "--next-vars" option has been removed. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
Because it has been replaced by "--next-exit". Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
instead of "git bisect--helper --next-vars". Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
The goal of this patch is to port more shell code from the "bisect_next" function in "git-bisect.sh" to C code in "builtin-bisect--helper.c". So we port the code that interprets the bisection result and stops or continues (by checking out the next revision) the bisection process. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
So we can easily reuse the code in a later patch. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
This simplifies the code, and while at it we create the "print_commit_list" function that will be reused later. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Christian Couder 提交于
Because it will be used from "bisect.c" too. Signed-off-by: NChristian Couder <chriscool@tuxfamily.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 07 5月, 2009 9 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
POSIX only requires sed to work on text files and MERGE_RR is not a text file. Some versions of sed complain that this file is not newline terminated, and exit non-zero. Use perl instead which does not have a problem with it. Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
These two lines appear to be unnecessary. They set variables which are not used afterwards. The primary motivation to remove them is that the sed invocation exits non-zero for seds which require newline termination of input files. Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
Some versions of sed exit non-zero if the file they are supplied is not newline terminated. Solaris's /usr/xpg4/bin/sed is one such sed. So rework this test to avoid doing so. This affects tests t8001-annotate.sh and t8002-blame.sh. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
Some versions of sed exit non-zero if the file they are supplied is not newline terminated. Solaris's /usr/xpg4/bin/sed is one such sed. In this case the sed invocation can be avoided entirely since the resulting file is equivalent to a previously created file. So, just copy that file into place instead. Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
Not all versions of grep understand backslashed extended regular expressions. Possibly only gnu grep does. Signed-off-by: NBrandon Casey <casey@nrlssc.navy.mil> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Fredrik Skolmli and Thomas Rast noticed that it was left unstated that "git clean" ran from a subdirectory will not affect anything outside it, with or without path limiters. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 06 5月, 2009 8 次提交
-
-
由 Junio C Hamano 提交于
* maint: improve error message in config.c t4018-diff-funcname: add cpp xfuncname pattern to syntax test Work around BSD whose typeof(tv.tv_sec) != time_t git-am.txt: reword extra headers in message body git-am.txt: Use date or value instead of time or timestamp git-am.txt: add an 'a', say what 'it' is, simplify a sentence dir.c: Fix two minor grammatical errors in comments git-svn: fix a sloppy Getopt::Long usage
-
由 Junio C Hamano 提交于
* rj/maint-1.6.0-svn-parse-fix: git-svn: fix a sloppy Getopt::Long usage
-
由 Junio C Hamano 提交于
* maint-1.6.0: dir.c: Fix two minor grammatical errors in comments
-
由 Alex Riesen 提交于
Show errno if opening a lockfile fails. Signed-off-by: NAlex Riesen <raa.lkml@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brandon Casey 提交于
Signed-off-by: NBrandon Casey <drafnel@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Bernd Ahlers 提交于
According to POSIX, tv_sec is supposed to be a time_t, but OpenBSD (and FreeBSD, too) defines it to be a long, which triggers a type mismatch when a pointer to it is given to localtime_r(). Acked-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Stephen Boyd 提交于
Signed-off-by: NStephen Boyd <bebarino@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Stephen Boyd 提交于
Signed-off-by: NStephen Boyd <bebarino@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-