- 10 8月, 2010 5 次提交
-
-
由 René Scharfe 提交于
For consistency with other git commands, let git prune accept the long options --dry-run and --verbose for the respective short ones -n and -v. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 René Scharfe 提交于
For consistency with other git commands, let the prune subcommand of git notes accept the long options --dry-run and --verbose for the respective short ones -n and -v. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Matthieu Moy 提交于
These options take an optional argument, but this optional argument was not documented. Original patch by Matthieu Moy, but documentation for -B mostly copied from the explanations of Junio C Hamano. While we're there, fix a typo in a comment in diffcore.h. Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Brad King 提交于
Users reading git-apply documentation may also be interested in git-am, especially after receiving an email created with git-format-patch. The documentation for git-am already references git-apply. Add the reverse. Signed-off-by: NBrad King <brad.king@kitware.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Rast 提交于
The test would not fail if the filtering failed to do anything, since in test -z "$(git diff HEAD directorymoved:newsubdir)"' 'directorymoved:newsubdir' is not valid, so git-diff fails without printing anything on stdout. But then the exit status of git-diff is lost, whereas test -z "" succeeds. Use 'git diff --exit-code' instead, which does the right thing and has the added bonus of showing the differences if there are any. Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 07 8月, 2010 2 次提交
-
-
由 Jonathan Nieder 提交于
check-ref-format --branch requires access to the repository to resolve refs like @{-1}. Noticed by Nguyễn Thái Ngọc Duy. Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
The code for each subcommand should be easier to read and manipulate this way. Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 06 8月, 2010 1 次提交
-
-
由 Matthieu Moy 提交于
Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 04 8月, 2010 3 次提交
-
-
由 Junio C Hamano 提交于
* sv/maint-diff-q-clear-fix: Fix DIFF_QUEUE_CLEAR refactoring
-
由 Junio C Hamano 提交于
* rr/svn-fe: contrib/svn-fe: Add the svn-fe target to .gitignore contrib/svn-fe: Fix IncludePath
-
由 Junio C Hamano 提交于
* pt/git-gui: git-gui: fix size and position of window panes on startup git-gui: mc cannot be used before msgcat has been loaded git-gui: use textconv filter for diff and blame git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32 git-gui: fix shortcut creation on cygwin git-gui: fix PATH environment for mingw development environment git-gui: fix usage of _gitworktree when creating shortcut for windows git-gui: fix "Explore Working Copy" for Windows again git-gui: fix usage of themed widgets variable git-gui: Handle failure of core.worktree to identify the working directory. git-gui: check whether systems nice command works or disable it
-
- 03 8月, 2010 8 次提交
-
-
由 Ramkumar Ramachandra 提交于
Add the svn-fe target to .gitignroe. Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ramkumar Ramachandra 提交于
Include the path "../../vcs-svn" while compiling it in the Makefile and change svn-fe.c to include svndump.h. Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
* ab/tap: test-lib: Remove 3 year old no-op --no-python option test-lib: Ignore --quiet under a TAP harness
-
由 Ævar Arnfjörð Bjarmason 提交于
The --no-python option was added to test-lib.sh by Johannes Schindelin in early 2006 in abb7c7b3. It was later turned into a no-op by Junio C Hamano in 7cdbff14 the same year. Over three years is long enough before removing this old wart which was retained for backwards compatibility. Our tests have been using NO_PYTHON and "test_have_prereq PYTHON" for a long time now. Signed-off-by: NÆvar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Ævar Arnfjörð Bjarmason 提交于
Running the tests with --quiet under a TAP harness will always fail, since a TAP harness always needs actual test output to go along with the plan that's being emitted. Change the test-lib.sh to ignore the --quiet option under HARNESS_ACTIVE to work around this. Then users that have --quiet in their GIT_TEST_OPTS can run tests under prove(1) without everything breaking. Signed-off-by: NÆvar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
git://repo.or.cz/git-gui由 Junio C Hamano 提交于
* git://repo.or.cz/git-gui: git-gui: fix size and position of window panes on startup git-gui: mc cannot be used before msgcat has been loaded git-gui: use textconv filter for diff and blame git-gui: Avoid using the <<Copy>> binding as a menu accelerator on win32 git-gui: fix shortcut creation on cygwin git-gui: fix PATH environment for mingw development environment git-gui: fix usage of _gitworktree when creating shortcut for windows git-gui: fix "Explore Working Copy" for Windows again git-gui: fix usage of themed widgets variable git-gui: Handle failure of core.worktree to identify the working directory. git-gui: check whether systems nice command works or disable it
-
由 Thomas Rast 提交于
When calling rev-parse --parseopt, as in the (now fixed) documented example eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)" the outermost quoting is required, as otherwise all runs of arbitrary whitespace inside the resulting 'set -- ...' call would be collapsed into a single space. This was exposed as a result of our new use of cat <<\EOF since 47e9cd28 (parseopt: wrap rev-parse --parseopt usage for eval consumption, 2010-06-12), but has always been a problem when handling arguments containing e.g. newlines. Point this out in the documentation, and in particular correct the example that did not have the quotes. Noticed-by: NJoshua Jensen <jjensen@workspacewhiz.com> Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 02 8月, 2010 3 次提交
-
-
由 Junio C Hamano 提交于
It introduced a macro to reduce repeated assignments to three fields, but an unrelated and incorrect change snuck in by mistake, which broke commands like "git diff-files -p --submodule". Noticed by Sven Verdoolaege. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Pat Thoyts 提交于
The themed panedwindow needs to have the sash position set after the widget has been mapped therefore apply this setting in the Map event binding. To avoid visible redraws as the application is constructed the main window should be withdrawn until all the widgets have been added Signed-off-by: NPat Thoyts <patthoyts@users.sourceforge.net>
-
由 Pat Thoyts 提交于
If someone attempts to use an older version that Tk 8.4 the error was masked by the lack of a mc command. Signed-off-by: NPat Thoyts <patthoyts@users.sourceforge.net>
-
- 30 7月, 2010 6 次提交
-
-
由 Clément Poulain 提交于
Create a checkbox "Use Textconv For Diffs and Blame" in git-gui options. If checked and if the driver for the concerned file exists, git-gui calls diff and blame with --textconv option Signed-off-by: NClément Poulain <clement.poulain@ensimag.imag.fr> Signed-off-by: NDiane Gasselin <diane.gasselin@ensimag.imag.fr> Signed-off-by: NAxel Bonnet <axel.bonnet@ensimag.imag.fr> Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NPat Thoyts <patthoyts@users.sourceforge.net>
-
由 Pat Thoyts 提交于
On Windows the Control-C binding is used to copy and is mapped to the Tk virtual event <<Copy>>. In the initial git-gui dialog this is also bound as an accelerator for the Clone menu item. The effect is that both bindings run, copying the text but resetting the clone page or switching to the clone page when the user tries to copy text from one of the entry fields. This patch avoids this by using Control-L instead for Windows only. Signed-off-by: NPat Thoyts <patthoyts@users.sourceforge.net>
-
由 Heiko Voigt 提交于
When the user tried to create a desktop icon with git gui on cygwin wscript was complaining about an unknown option and displaying the non-native path as such. Signed-off-by: NHeiko Voigt <hvoigt@hvoigt.net> Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NPat Thoyts <patthoyts@users.sourceforge.net>
-
由 Heiko Voigt 提交于
When creating a desktop shortcut from the gui the shortcut directly starts wish with the git-gui script. In the msysgit development environment some dll's reside in the mingw/bin directory which causes that git can not start because libiconv2.dll is not found. When using such a link the error is even more cryptic stating: "child killed: unknown signal" Signed-off-by: NHeiko Voigt <hvoigt@hvoigt.net> Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NPat Thoyts <patthoyts@users.sourceforge.net>
-
由 Heiko Voigt 提交于
This fixes msysGit issue 425. Signed-off-by: NHeiko Voigt <heiko.voigt@mahr.de> Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NPat Thoyts <patthoyts@users.sourceforge.net>
-
由 Markus Heidelberg 提交于
It has already been fixed in commit 454efb47 (git-gui (Win): make "Explore Working Copy" more robust, 2009-04-01), but has been broken in commit 21985a11 (git-gui: handle non-standard worktree locations, 2010-01-23) by accidentally replacing too much with a new variable. The problem can be reproduced when starting git-gui from within a subdirectory. The solution is to convert the path name, explorer.exe is invoked with, to a platform native name. Signed-off-by: NMarkus Heidelberg <markus.heidelberg@web.de> Signed-off-by: NPat Thoyts <patthoyts@users.sourceforge.net>
-
- 29 7月, 2010 2 次提交
-
-
由 David D. Kilzer 提交于
When performing a non-interactive rebase, sometimes "git rebase --continue" will fail if an unmodified file is touched in the working directory: You must edit all merge conflicts and then mark them as resolved using git add This is caused by "git diff-files" reporting a difference between the index and the filesystem: :100644 100644 d00491...... 000000...... M file The fix is to run "git update-index --refresh" before "git diff-files" as is done in git-rebase--interactive. Signed-off-by: NDavid D. Kilzer <ddkilzer@kilzer.net> Acked-by: NJohannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Matthieu Moy 提交于
The behavior of "git ls-files -t" is very misleading (see http://thread.gmane.org/gmane.comp.version-control.git/126516 and http://thread.gmane.org/gmane.comp.version-control.git/144394/focus=144397 for examples of mislead users) and badly documented, hence we point the users to superior alternatives. The feature is marked as "semi-obsolete" but not "scheduled for removal" since it's a plumbing command, scripts might use it, and Git testsuite already uses it to test the state of the index. Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 28 7月, 2010 10 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Jonathan Nieder 提交于
If $HOME is unset (as in some automated build situations), currently git config --path path.home "~" git config --path --get path.home segfaults. Error out with Failed to expand user dir in: '~/' instead. Reported-by: NJulien Cristau <jcristau@debian.org> Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Stephen Boyd 提交于
From api-parse-options.txt: `description` is a short string to describe the effect of the option. It shall begin with a lower-case letter and a full stop (`.`) shall be omitted at the end. It also makes it less confusing if the argument is 'no.' or 'no'. Signed-off-by: NStephen Boyd <bebarino@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Matthieu Moy 提交于
The message is especially confusing when "git fetch" is ran from "git pull", for users not aware of "git fetch". The new message makes it clear that "fetch" means "fetch new revisions", and gives hint on the solution. We don't add a advice.* configuration option since this message doesn't appear in normal use, and shouldn't disturb advanced users. Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Rast 提交于
The manpage was added in 1ed6f2c5 (Documentation: gitrevisions, 2010-07-05), but since it does not have a corresponding git command, it needs an exception for check-docs. Signed-off-by: NThomas Rast <trast@student.ethz.ch> Acked-by: NMichael J Gruber <git@drmicha.warpmail.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Thomas Rast 提交于
8b1fa778 (Allow passing of configuration parameters in the command line, 2010-03-26) forgot the closing ']' for the -c option. While we're there, also rewrap. Instead of folding the last two lines together, try to highlight that COMMAND is required by starting a line with it. Signed-off-by: NThomas Rast <trast@student.ethz.ch> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-