- 29 10月, 2015 1 次提交
-
-
由 Johannes Schindelin 提交于
Based on a bug report by Chad Boles. Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 06 10月, 2015 1 次提交
-
-
由 Matthieu Moy 提交于
804098bb (git rebase -i: add static check for commands and SHA-1, 2015-06-29) tried to check all insns before running any in the todo list, but it did so by implementing its own parser that is a lot stricter than necessary. We used to allow lines that are indented (including comment lines), and we used to allow a whitespace between the insn and the commit object name to be HT, among other things, that are flagged as an invalid line by mistake. Fix this by using the same tokenizer that is used to parse the todo list file in the new check. Whether it's a good thing to accept indented comments is debatable (other commands like "git commit" do not accept them), but we already accepted them in the past, and some people and scripts rely on this behavior. Also, a line starting with space followed by a '#' cannot have any meaning other than being a comment, hence it doesn't harm to accept them as comments. Largely based on patch by: Junio C Hamano <gitster@pobox.com> [jc: updated test with quickfix from Torsten Bögershausen] Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 03 10月, 2015 1 次提交
-
-
由 Matthieu Moy 提交于
The git-rebase-todo is parsed several times with different parsers. In principle, the user input is normalized by transform_todo_ids and further parsing can be stricter. In case the user wrote pick deadbeef<TAB>commit message the parser of transform_todo_ids was considering the sha1 to be "deadbeef<TAB>commit", and was leaving the tab in the transformed sheet. In practice, this went unnoticed since the actual command interpretation was done later in do_next which did accept the tab as a separator. Make it explicit in the code of transform_todo_ids that tabs are accepted. This way, code that mimicks it will also accept tabs as separator. A similar construct appears in skip_unnecessary_picks, but this one comes after transform_todo_ids, hence reads the normalized format, so it needs not be changed. Signed-off-by: NMatthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 01 7月, 2015 3 次提交
-
-
由 Galan Rémi 提交于
Check before the start of the rebasing if the commands exists, and for the commands expecting a SHA-1, check if the SHA-1 is present and corresponds to a commit. In case of error, print the error, stop git rebase and prompt the user to fix with 'git rebase --edit-todo' or to abort. This allows to avoid doing half of a rebase before finding an error and giving back what's left of the todo list to the user and prompt him to fix when it might be too late for him to do so (he might have to abort and restart the rebase). Signed-off-by: NGalan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Galan Rémi 提交于
Check if commits were removed (i.e. a line was deleted) and print warnings or stop git rebase depending on the value of the configuration variable rebase.missingCommitsCheck. This patch gives the user the possibility to avoid silent loss of information (losing a commit through deleting the line in this case) if he wants. Add the configuration variable rebase.missingCommitsCheck. - When unset or set to "ignore", no checking is done. - When set to "warn", the commits are checked, warnings are displayed but git rebase still proceeds. - When set to "error", the commits are checked, warnings are displayed and the rebase is stopped. (The user can then use 'git rebase --edit-todo' and 'git rebase --continue', or 'git rebase --abort') rebase.missingCommitsCheck defaults to "ignore". Signed-off-by: NGalan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Galan Rémi 提交于
Instead of removing a line to remove the commit, you can use the command "drop" (just like "pick" or "edit"). It has the same effect as deleting the line (removing the commit) except that you keep a visual trace of your actions, allowing a better control and reducing the possibility of removing a commit by mistake. Signed-off-by: NGalan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 28 5月, 2015 2 次提交
-
-
由 Junio C Hamano 提交于
* nd/untracked-cache: t7063: hide stderr from setup inside prereq
-
由 Jeff King 提交于
When t7063 starts, it runs "update-index --untracked-cache" to see if we support the untracked cache. Its output goes straight to stderr, even if the test is not run with "-v". Let's wrap it in a prereq that will hide the output by default, but show it with "-v". Signed-off-by: NJeff King <peff@peff.net> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 27 5月, 2015 16 次提交
-
-
由 Junio C Hamano 提交于
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
"git rev-list --objects $old --not --all" to see if everything that is reachable from $old is already connected to the existing refs was very inefficient. * jk/still-interesting: limit_list: avoid quadratic behavior from still_interesting
-
由 Junio C Hamano 提交于
"hash-object --literally" introduced in v2.2 was not prepared to take a really long object type name. * jc/hash-object: write_sha1_file(): do not use a separate sha1[] array t1007: add hash-object --literally tests hash-object --literally: fix buffer overrun with extra-long object type git-hash-object.txt: document --literally option
-
由 Junio C Hamano 提交于
"git rebase --quiet" was not quite quiet when there is nothing to do. * jk/rebase-quiet-noop: rebase: silence "git checkout" for noop rebase
-
由 Junio C Hamano 提交于
The completion for "log --decorate=" parameter value was incorrect. * sg/complete-decorate-full-not-long: completion: fix and update 'git log --decorate=' options
-
由 Junio C Hamano 提交于
"filter-branch" corrupted commit log message that ends with an incomplete line on platforms with some "sed" implementations that munge such a line. Work it around by avoiding to use "sed". * jk/filter-branch-use-of-sed-on-incomplete-line: filter-branch: avoid passing commit message through sed
-
由 Junio C Hamano 提交于
"git daemon" fails to build from the source under NO_IPV6 configuration (regression in 2.4). * jc/daemon-no-ipv6-for-2.4.1: daemon: unbreak NO_IPV6 build regression
-
由 Junio C Hamano 提交于
"git stash pop/apply" forgot to make sure that not just the working tree is clean but also the index is clean. The latter is important as a stash application can conflict and the index will be used for conflict resolution. * jk/stash-require-clean-index: stash: require a clean index to apply t3903: avoid applying onto dirty index t3903: stop hard-coding commit sha1s
-
由 Junio C Hamano 提交于
We have prepended $GIT_EXEC_PATH and the path "git" is installed in (typically "/usr/bin") to $PATH when invoking subprograms and hooks for almost eternity, but the original use case the latter tried to support was semi-bogus (i.e. install git to /opt/foo/git and run it without having /opt/foo on $PATH), and more importantly it has become less and less relevant as Git grew more mainstream (i.e. the users would _want_ to have it on their $PATH). Stop prepending the path in which "git" is installed to users' $PATH, as that would interfere the command search order people depend on (e.g. they may not like versions of programs that are unrelated to Git in /usr/bin and want to override them by having different ones in /usr/local/bin and have the latter directory earlier in their $PATH). * jk/git-no-more-argv0-path-munging: stop putting argv[0] dirname at front of PATH
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Teach the index to optionally remember already seen untracked files to speed up "git status" in a working tree with tons of cruft. * nd/untracked-cache: (24 commits) git-status.txt: advertisement for untracked cache untracked cache: guard and disable on system changes mingw32: add uname() t7063: tests for untracked cache update-index: test the system before enabling untracked cache update-index: manually enable or disable untracked cache status: enable untracked cache untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE untracked cache: mark index dirty if untracked cache is updated untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS untracked cache: avoid racy timestamps read-cache.c: split racy stat test to a separate function untracked cache: invalidate at index addition or removal untracked cache: load from UNTR index extension untracked cache: save to an index extension ewah: add convenient wrapper ewah_serialize_strbuf() untracked cache: don't open non-existent .gitignore untracked cache: mark what dirs should be recursed/saved untracked cache: record/validate dir mtime and reuse cached output untracked cache: make a wrapper around {open,read,close}dir() ...
-
由 Junio C Hamano 提交于
The code to read pack-bitmap wanted to allocate a few hundred pointers to a structure, but by mistake allocated and leaked memory enough to hold that many actual structures. Correct the allocation size and also have it on stack, as it is small enough. * rs/plug-leak-in-pack-bitmaps: pack-bitmaps: plug memory leak, fix allocation size for recent_bitmaps
-
由 Junio C Hamano 提交于
The pull.ff configuration was supposed to override the merge.ff configuration, but it didn't. * pt/pull-ff-vs-merge-ff: pull: parse pull.ff as a bool or string pull: make pull.ff=true override merge.ff
-
由 Junio C Hamano 提交于
"git pull --log" and "git pull --no-log" worked as expected, but "git pull --log=20" did not. * pt/pull-log-n: pull: handle --log=<n>
-
由 Junio C Hamano 提交于
"git rerere forget" in a repository without rerere enabled gave a cryptic error message; it should be a silent no-op instead. * jk/rerere-forget-check-enabled: rerere: exit silently on "forget" when rerere is disabled
-
- 23 5月, 2015 16 次提交
-
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Doc consistency updates. * ps/doc-packfile-vs-pack-file: doc: fix inconsistent spelling of "packfile" pack-protocol.txt: fix insconsistent spelling of "packfile" git-unpack-objects.txt: fix inconsistent spelling of "packfile" git-verify-pack.txt: fix inconsistent spelling of "packfile"
-
由 Junio C Hamano 提交于
There was a commented-out (instead of being marked to expect failure) test that documented a breakage that was fixed since the test was written; turn it into a proper test. * sb/t1020-cleanup: subdirectory tests: code cleanup, uncomment test
-
由 Junio C Hamano 提交于
The controlling tty-based heuristics to squelch progress output did not consider that the process may not be talking to a tty at all (e.g. sending the progress to sideband #2). This is a finishing touch to a topic that is already in 'master'. * lm/squelch-bg-progress: progress: treat "no terminal" as being in the foreground
-
由 Junio C Hamano 提交于
Filter scripts were run with SIGPIPE disabled on the Git side, expecting that they may not read what Git feeds them to filter. We however treated a filter that does not read its input fully before exiting as an error. This changes semantics, but arguably in a good way. If a filter can produce its output without consuming its input using whatever magic, we now let it do so, instead of diagnosing it as a programming error. * jc/ignore-epipe-in-filter: filter_buffer_or_fd(): ignore EPIPE copy.c: make copy_fd() report its status silently
-
由 Junio C Hamano 提交于
Git 2.4 broke setting verbosity and progress levels on "git clone" with native transports. * mh/clone-verbosity-fix: clone: call transport_set_verbosity before anything else on the newly created transport
-
由 Junio C Hamano 提交于
There was a dead code that used to handle "git pull --tags" and show special-cased error message, which was made irrelevant when the semantics of the option changed back in Git 1.9 days. * pt/pull-tags-error-diag: pull: remove --tags error in no merge candidates case
-
由 Junio C Hamano 提交于
Instead of dying immediately upon failing to obtain a lock, retry after a short while with backoff. * mh/lockfile-retry: lock_packed_refs(): allow retries when acquiring the packed-refs lock lockfile: allow file locking to be retried with a timeout
-
由 Junio C Hamano 提交于
"git add -e" did not allow the user to abort the operation by killing the editor. * jk/add-e-kill-editor: add: check return value of launch_editor
-
由 Junio C Hamano 提交于
Code clean-up for completion script (in contrib/). * sg/completion-config: completion: simplify query for config variables completion: add a helper function to get config variables
-
由 Junio C Hamano 提交于
The ref API did not handle cases where 'refs/heads/xyzzy/frotz' is removed at the same time as 'refs/heads/xyzzy' is added (or vice versa) very well. * mh/ref-directory-file: reflog_expire(): integrate lock_ref_sha1_basic() errors into ours ref_transaction_commit(): delete extra "the" from error message ref_transaction_commit(): provide better error messages rename_ref(): integrate lock_ref_sha1_basic() errors into ours lock_ref_sha1_basic(): improve diagnostics for ref D/F conflicts lock_ref_sha1_basic(): report errors via a "struct strbuf *err" verify_refname_available(): report errors via a "struct strbuf *err" verify_refname_available(): rename function refs: check for D/F conflicts among refs created in a transaction ref_transaction_commit(): use a string_list for detecting duplicates is_refname_available(): use dirname in first loop struct nonmatching_ref_data: store a refname instead of a ref_entry report_refname_conflict(): inline function entry_matches(): inline function is_refname_available(): convert local variable "dirname" to strbuf is_refname_available(): avoid shadowing "dir" variable is_refname_available(): revamp the comments t1404: new tests of ref D/F conflicts within transactions
-
由 Junio C Hamano 提交于
Multi-ref transaction support we merged a few releases ago unnecessarily kept many file descriptors open, risking to fail with resource exhaustion. This is for 2.4.x track. * mh/write-refs-sooner-2.4: ref_transaction_commit(): fix atomicity and avoid fd exhaustion ref_transaction_commit(): remove the local flags variable ref_transaction_commit(): inline call to write_ref_sha1() rename_ref(): inline calls to write_ref_sha1() from this function commit_ref_update(): new function, extracted from write_ref_sha1() write_ref_to_lockfile(): new function, extracted from write_ref_sha1() t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE update-ref: test handling large transactions properly ref_transaction_commit(): fix atomicity and avoid fd exhaustion ref_transaction_commit(): remove the local flags variable ref_transaction_commit(): inline call to write_ref_sha1() rename_ref(): inline calls to write_ref_sha1() from this function commit_ref_update(): new function, extracted from write_ref_sha1() write_ref_to_lockfile(): new function, extracted from write_ref_sha1() t7004: rename ULIMIT test prerequisite to ULIMIT_STACK_SIZE update-ref: test handling large transactions properly
-
由 Junio C Hamano 提交于
The "log --decorate" enhancement in Git 2.4 that shows the commit at the tip of the current branch e.g. "HEAD -> master", did not work with --decorate=full. * mg/log-decorate-HEAD: log: do not shorten decoration names too early log: decorate HEAD with branch name under --decorate=full, too
-
由 Junio C Hamano 提交于
Various documentation mark-up fixes to make the output more consistent in general and also make AsciiDoctor (an alternative formatter) happier. * jk/asciidoc-markup-fix: doc: convert AsciiDoc {?foo} to ifdef::foo[] doc: put example URLs and emails inside literal backticks doc: drop backslash quoting of some curly braces doc: convert \--option to --option doc/add: reformat `--edit` option doc: fix length of underlined section-title doc: fix hanging "+"-continuation doc: fix unquoted use of "{type}" doc: fix misrendering due to `single quote'
-
由 Junio C Hamano 提交于
A literal block in the tutorial had lines with unequal lengths to delimit it from the rest of the document, which choke GitHub's AsciiDoc renderer. * jk/stripspace-asciidoctor-fix: doc: fix unmatched code fences in git-stripspace
-
由 Junio C Hamano 提交于
A literal block in the tutorial had lines with unequal lengths to delimit it from the rest of the document, which choke GitHub's AsciiDoc renderer. * ja/tutorial-asciidoctor-fix: doc: fix unmatched code fences
-