* maint-2.18:
  Git 2.18.1
  Git 2.17.2
  fsck: detect submodule paths starting with dash
  fsck: detect submodule urls starting with dash
  Git 2.16.5
  Git 2.15.3
  Git 2.14.5
  submodule-config: ban submodule paths that start with a dash
  submodule-config: ban submodule urls that start with dash
  submodule--helper: use "--" to signal end of clone options

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

* maint-2.17:
  Git 2.17.2
  fsck: detect submodule paths starting with dash
  fsck: detect submodule urls starting with dash
  Git 2.16.5
  Git 2.15.3
  Git 2.14.5
  submodule-config: ban submodule paths that start with a dash
  submodule-config: ban submodule urls that start with dash
  submodule--helper: use "--" to signal end of clone options

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

As with urls, submodule paths with dashes are ignored by
git, but may end up confusing older versions. Detecting them
via fsck lets us prevent modern versions of git from being a
vector to spread broken .gitmodules to older versions.

Compared to blocking leading-dash urls, though, this
detection may be less of a good idea:

  1. While such paths provide confusing and broken results,
     they don't seem to actually work as option injections
     against anything except "cd". In particular, the
     submodule code seems to canonicalize to an absolute
     path before running "git clone" (so it passes
     /your/clone/-sub).

  2. It's more likely that we may one day make such names
     actually work correctly. Even after we revert this fsck
     check, it will continue to be a hassle until hosting
     servers are all updated.

On the other hand, it's not entirely clear that the behavior
in older versions is safe. And if we do want to eventually
allow this, we may end up doing so with a special syntax
anyway (e.g., writing "./-sub" in the .gitmodules file, and
teaching the submodule code to canonicalize it when
comparing).

So on balance, this is probably a good protection.
Signed-off-by: NJeff King <peff@peff.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Urls with leading dashes can cause mischief on older
versions of Git. We should detect them so that they can be
rejected by receive.fsckObjects, preventing modern versions
of git from being a vector by which attacks can spread.
Signed-off-by: NJeff King <peff@peff.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

* maint-2.16:
  Git 2.16.5
  Git 2.15.3
  Git 2.14.5
  submodule-config: ban submodule paths that start with a dash
  submodule-config: ban submodule urls that start with dash
  submodule--helper: use "--" to signal end of clone options

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

* maint-2.15:
  Git 2.15.3
  Git 2.14.5
  submodule-config: ban submodule paths that start with a dash
  submodule-config: ban submodule urls that start with dash
  submodule--helper: use "--" to signal end of clone options

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

* maint-2.14:
  Git 2.14.5
  submodule-config: ban submodule paths that start with a dash
  submodule-config: ban submodule urls that start with dash
  submodule--helper: use "--" to signal end of clone options

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

We recently banned submodule urls that look like
command-line options. This is the matching change to ban
leading-dash paths.

As with the urls, this should not break any use cases that
currently work. Even with our "--" separator passed to
git-clone, git-submodule.sh gets confused. Without the code
portion of this patch, the clone of "-sub" added in t7417
would yield results like:

    /path/to/git-submodule: 410: cd: Illegal option -s
    /path/to/git-submodule: 417: cd: Illegal option -s
    /path/to/git-submodule: 410: cd: Illegal option -s
    /path/to/git-submodule: 417: cd: Illegal option -s
    Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed.

Moreover, naively adding such a submodule doesn't work:

  $ git submodule add $url -sub
  The following path is ignored by one of your .gitignore files:
  -sub

even though there is no such ignore pattern (the test script
hacks around this with a well-placed "git mv").

Unlike leading-dash urls, though, it's possible that such a
path _could_ be useful if we eventually made it work. So
this commit should be seen not as recommending a particular
policy, but rather temporarily closing off a broken and
possibly dangerous code-path. We may revisit this decision
later.

There are two minor differences to the tests in t7416 (that
covered urls):

  1. We don't have a "./-sub" escape hatch to make this
     work, since the submodule code expects to be able to
     match canonical index names to the path field (so you
     are free to add submodule config with that path, but we
     would never actually use it, since an index entry would
     never start with "./").

  2. After this patch, cloning actually succeeds. Since we
     ignore the submodule.*.path value, we fail to find a
     config stanza for our submodule at all, and simply
     treat it as inactive. We still check for the "ignoring"
     message.
Signed-off-by: NJeff King <peff@peff.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The previous commit taught the submodule code to invoke our
"git clone $url $path" with a "--" separator so that we
aren't confused by urls or paths that start with dashes.

However, that's just one code path. It's not clear if there
are others, and it would be an easy mistake to add one in
the future. Moreover, even with the fix in the previous
commit, it's quite hard to actually do anything useful with
such an entry. Any url starting with a dash must fall into
one of three categories:

 - it's meant as a file url, like "-path". But then any
   clone is not going to have the matching path, since it's
   by definition relative inside the newly created clone. If
   you spell it as "./-path", the submodule code sees the
   "/" and translates this to an absolute path, so it at
   least works (assuming the receiver has the same
   filesystem layout as you). But that trick does not apply
   for a bare "-path".

 - it's meant as an ssh url, like "-host:path". But this
   already doesn't work, as we explicitly disallow ssh
   hostnames that begin with a dash (to avoid option
   injection against ssh).

 - it's a remote-helper scheme, like "-scheme::data". This
   _could_ work if the receiver bends over backwards and
   creates a funny-named helper like "git-remote--scheme".
   But normally there would not be any helper that matches.

Since such a url does not work today and is not likely to do
anything useful in the future, let's simply disallow them
entirely. That protects the existing "git clone" path (in a
belt-and-suspenders way), along with any others that might
exist.

Our tests cover two cases:

  1. A file url with "./" continues to work, showing that
     there's an escape hatch for people with truly silly
     repo names.

  2. A url starting with "-" is rejected.

Note that we expect case (2) to fail, but it would have done
so even without this commit, for the reasons given above.
So instead of just expecting failure, let's also check for
the magic word "ignoring" on stderr. That lets us know that
we failed for the right reason.
Signed-off-by: NJeff King <peff@peff.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

When we clone a submodule, we call "git clone $url $path".
But there's nothing to say that those components can't begin
with a dash themselves, confusing git-clone into thinking
they're options. Let's pass "--" to make it clear what we
expect.

There's no test here, because it's actually quite hard to
make these names work, even with "git clone" parsing them
correctly. And we're going to restrict these cases even
further in future commits. So we'll leave off testing until
then; this is just the minimal fix to prevent us from doing
something stupid with a badly formed entry.
Reported-by: Njoernchen <joernchen@phenoelit.de>
Signed-off-by: NJeff King <peff@peff.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

l10n for Git 2.19.0 round 2

* tag 'l10n-2.19.0-rnd2' of git://github.com/git-l10n/git-po:
  l10n: zh_CN: for git v2.19.0 l10n round 1 to 2
  l10n: bg.po: Updated Bulgarian translation (3958t)
  l10n: vi.po(3958t): updated Vietnamese translation v2.19.0 round 2
  l10n: es.po v2.19.0 round 2
  l10n: fr.po v2.19.0 rnd 2
  l10n: fr.po v2.19.0 rnd 1
  l10n: fr: fix a message seen in git bisect
  l10n: sv.po: Update Swedish translation (3958t0f0u)
  l10n: git.pot: v2.19.0 round 2 (3 new, 5 removed)
  l10n: ru.po: update Russian translation
  l10n: git.pot: v2.19.0 round 1 (382 new, 30 removed)
  l10n: de.po: translate 108 new messages
  l10n: zh_CN: review for git 2.18.0
  l10n: sv.po: Update Swedish translation(3608t0f0u)

* jn/submodule-core-worktree-revert:
  Revert "Merge branch 'sb/submodule-core-worktree'"

The earlier attempt barfed when given a CONTENT_LENGTH that is
set to an empty string.  RFC 3875 is fairly clear that in this
case we should not read any message body, but we've been reading
through to the EOF in previous versions (which did not even pay
attention to the environment variable), so keep that behaviour for
now in this late update.

* mk/http-backend-content-length:
  http-backend: allow empty CONTENT_LENGTH

Translate 382 new messages (3958t0f0u) for git 2.19.0.
Signed-off-by: NJiang Xin <worldhello.net@gmail.com>

* 'master' of git://github.com/alshopov/git-po:
  l10n: bg.po: Updated Bulgarian translation (3958t)

Signed-off-by: NAlexander Shopov <ash@kambanaria.org>

This reverts commit 7e25437d, reversing
changes made to 00624d60.

v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there.  In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in

	fatal: could not open sub/.git for writing

The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule.  If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.

It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: NAllan Sandfeld Jensen <allan.jensen@qt.io>
Helped-by: NStefan Beller <sbeller@google.com>
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

According to RFC3875, empty environment variable is equivalent to unset,
and for CONTENT_LENGTH it should mean zero body to read.

However, unset CONTENT_LENGTH is also used for chunked encoding to indicate
reading until EOF. At least, the test "large fetch-pack requests can be split
across POSTs" from t5551 starts faliing, if unset or empty CONTENT_LENGTH is
treated as zero length body. So keep the existing behavior as much as possible.

Add a test for the case.
Reported-By: NJelmer Vernooij <jelmer@jelmer.uk>
Signed-off-by: NMax Kirillov <max@max630.net>
Signed-off-by: NJunio C Hamano <gitster@pobox.com>

Signed-off-by: NTran Ngoc Quan <vnwildman@gmail.com>

Signed-off-by: NChristopher Diaz Riveros <chrisadr@gentoo.org>

* 'fr_2.19.0_rnd1' of git://github.com/jnavila/git:
  l10n: fr.po v2.19.0 rnd 2
  l10n: fr.po v2.19.0 rnd 1
  l10n: fr: fix a message seen in git bisect

Signed-off-by: NJean-Noël Avila <jn.avila@free.fr>

Signed-off-by: NJean-Noël Avila <jn.avila@free.fr>

"cette" can be only be used before a word (like in "cette bouteille" for
"this bottle"), but here "this" refers to the current step and we have
to use "ceci" in French.
Signed-off-by: NRaphaël Hertzog <hertzog@debian.org>

Signed-off-by: NPeter Krefting <peter@softwolves.pp.se>

Signed-off-by: NJunio C Hamano <gitster@pobox.com>

The test linter code has learned that the end of here-doc mark
"EOF" can be quoted in a double-quote pair, not just in a
single-quote pair.

* es/chain-lint-more:
  chainlint: match "quoted" here-doc tags

Portability fix.

* ab/portable-more:
  tests: fix non-portable iconv invocation
  tests: fix non-portable "${var:-"str"}" construct
  tests: fix and add lint for non-portable grep --file
  tests: fix version-specific portability issue in Perl JSON
  tests: use shorter labels in chainlint.sed for AIX sed
  tests: fix comment syntax in chainlint.sed for AIX sed
  tests: fix and add lint for non-portable seq
  tests: fix and add lint for non-portable head -c N

Build fix.

* es/freebsd-iconv-portability:
  config.mak.uname: resolve FreeBSD iconv-related compilation warning

"git merge-base" in 2.19-rc1 has performance regression when the
(experimental) commit-graph feature is in use, which has been
mitigated.

* ds/commit-graph-lockfile-fix:
  commit: don't use generation numbers if not needed

Recent addition of "directory rename" heuristics to the
merge-recursive backend makes the command susceptible to false
positives and false negatives.  In the context of "git am -3",
which does not know about surrounding unmodified paths and thus
cannot inform the merge machinery about the full trees involved,
this risk is particularly severe.  As such, the heuristic is
disabled for "git am -3" to keep the machinery "more stupid but
predictable".

* en/directory-renames-nothanks:
  am: avoid directory rename detection when calling recursive merge machinery
  merge-recursive: add ability to turn off directory rename detection
  t3401: add another directory rename testcase for rebase and am

Recent "git rebase -i" update started to write bogusly formatted
author-script, with a matching broken reading code.  These are
fixed.

* pw/rebase-i-author-script-fix:
  sequencer: fix quoting in write_author_script
  sequencer: handle errors from read_author_ident()

Generate po/git.pot from v2.19.0-rc1 for git v2.19.0 l10n round 2.
Signed-off-by: NJiang Xin <worldhello.net@gmail.com>

* 'master' of git://github.com/git-l10n/git-po:
  l10n: ru.po: update Russian translation
  l10n: git.pot: v2.19.0 round 1 (382 new, 30 removed)
  l10n: de.po: translate 108 new messages
  l10n: zh_CN: review for git 2.18.0
  l10n: sv.po: Update Swedish translation(3608t0f0u)