- 08 3月, 2014 2 次提交
-
-
由 Junio C Hamano 提交于
"git add -u" and "git add -A" without any pathspec is a tree-wide operation now, even when they are run in a subdirectory of the working tree.
-
由 Junio C Hamano 提交于
Finally update the "git push" default behaviour to "simple".
-
- 06 3月, 2014 4 次提交
-
-
由 Junio C Hamano 提交于
* maint: i18n: proposed command missing leading dash
-
由 Junio C Hamano 提交于
Teach "make test" to run networking tests when possible by default. * jk/run-network-tests-by-default: tests: turn on network daemon tests by default
-
由 Junio C Hamano 提交于
Allow running "gc --auto" in the background. * nd/daemonize-gc: gc: config option for running --auto in background daemon: move daemonize() to libgit.a
-
由 Junio C Hamano 提交于
Teach combine-diff to honour the path-output-order imposed by diffcore-order, and optimize how matching paths are found in the N-way diffs made with parents. * ks/combine-diff: tests: add checking that combine-diff emits only correct paths combine-diff: simplify intersect_paths() further combine-diff: combine_diff_path.len is not needed anymore combine-diff: optimize combine_diff_path sets intersection diff test: add tests for combine-diff with orderfile diffcore-order: export generic ordering interface
-
- 05 3月, 2014 1 次提交
-
-
由 Sandy Carter 提交于
Add missing leading dash to proposed commands in french output when using the command: git branch --set-upstream remotename/branchname and when upstream is gone Signed-off-by: NSandy Carter <sandy.carter@savoirfairelinux.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 28 2月, 2014 21 次提交
-
-
由 Junio C Hamano 提交于
Attempting to deepen a shallow repository by fetching over smart HTTP transport failed in the protocol exchange, when no-done extension was used. The fetching side waited for the list of shallow boundary commits after the sending end stopped talking to it. * nd/http-fetch-shallow-fix: t5537: move http tests out to t5539 fetch-pack: fix deepen shallow over smart http with no-done cap protocol-capabilities.txt: document no-done protocol-capabilities.txt: refer multi_ack_detailed back to pack-protocol.txt pack-protocol.txt: clarify 'obj-id' in the last ACK after 'done' test: rename http fetch and push test files
-
由 Junio C Hamano 提交于
Borrow the bitmap index into packfiles from JGit to speed up enumeration of objects involved in a commit range without having to fully traverse the history. * jk/pack-bitmap: (26 commits) ewah: unconditionally ntohll ewah data ewah: support platforms that require aligned reads read-cache: use get_be32 instead of hand-rolled ntoh_l block-sha1: factor out get_be and put_be wrappers do not discard revindex when re-preparing packfiles pack-bitmap: implement optional name_hash cache t/perf: add tests for pack bitmaps t: add basic bitmap functionality tests count-objects: recognize .bitmap in garbage-checking repack: consider bitmaps when performing repacks repack: handle optional files created by pack-objects repack: turn exts array into array-of-struct repack: stop using magic number for ARRAY_SIZE(exts) pack-objects: implement bitmap writing rev-list: add bitmap mode to speed up object lists pack-objects: use bitmaps when packing objects pack-objects: split add_object_entry pack-bitmap: add support for bitmap indexes documentation: add documentation for the bitmap format ewah: compressed bitmap implementation ...
-
由 Junio C Hamano 提交于
Code clean-up. * dk/blame-janitorial: builtin/blame.c::find_copy_in_blob: no need to scan for region end blame.c: prepare_lines should not call xrealloc for every line builtin/blame.c::prepare_lines: fix allocation size of sb->lineno builtin/blame.c: eliminate same_suspect() builtin/blame.c: struct blame_entry does not need a prev link
-
由 Junio C Hamano 提交于
Teach "--gpg-sign" option to many commands that create commits. * bc/gpg-sign-everywhere: pull: add the --gpg-sign option. rebase: add the --gpg-sign option rebase: parse options in stuck-long mode rebase: don't try to match -M option rebase: remove useless arguments check am: add the --gpg-sign option am: parse options in stuck-long mode git-sh-setup.sh: add variable to use the stuck-long mode cherry-pick, revert: add the --gpg-sign option
-
由 Junio C Hamano 提交于
A handful of documentation updates, all trivially harmless. * al/docs: docs/git-blame: explain more clearly the example pickaxe use docs/git-clone: clarify use of --no-hardlinks option docs/git-remote: capitalize first word of initial blurb docs/merge-strategies: remove hyphen from mis-merges
-
由 Junio C Hamano 提交于
Avoid having to assign port number to be used in tests manually. * jk/test-ports: tests: auto-set git-daemon port tests: auto-set LIB_HTTPD_PORT from test name
-
由 Junio C Hamano 提交于
* nd/reset-intent-to-add: reset: support "--mixed --intent-to-add" mode
-
由 Junio C Hamano 提交于
* ks/tree-diff-walk: tree-walk: finally switch over tree descriptors to contain a pre-parsed entry revision: convert to using diff_tree_sha1() line-log: convert to using diff_tree_sha1() tree-diff: convert diff_root_tree_sha1() to just call diff_tree_sha1 with old=NULL tree-diff: allow diff_tree_sha1 to accept NULL sha1
-
由 Junio C Hamano 提交于
All subcommands that take pathspecs mishandled an in-tree symbolic link when given it as a full path from the root (which arguably is a sick way to use pathspecs). "git ls-files -s $(pwd)/RelNotes" in our tree is an easy reproduction recipe. * mw/symlinks: setup: don't dereference in-tree symlinks for absolute paths setup: add abspath_part_inside_repo() function t0060: add tests for prefix_path when path begins with work tree t0060: add test for prefix_path when path == work tree t0060: add test for prefix_path on symlinks via absolute paths t3004: add test for ls-files on symlinks via absolute paths
-
由 Junio C Hamano 提交于
* nd/test-rename-reset: t7101, t7014: rename test files to indicate what that file is for
-
由 Junio C Hamano 提交于
Make sure 'submodule update' modes that do not detach HEADs can be used more pleasantly by checking out a concrete branch when cloning them to prime the well. * wk/submodule-on-branch: Documentation: describe 'submodule update --remote' use case submodule: explicit local branch creation in module_clone submodule: document module_clone arguments in comments submodule: make 'checkout' update_module mode more explicit
-
由 Junio C Hamano 提交于
Shrink lifetime of variables by moving their definitions to an inner scope where appropriate. * ep/varscope: builtin/gc.c: reduce scope of variables builtin/fetch.c: reduce scope of variable builtin/commit.c: reduce scope of variables builtin/clean.c: reduce scope of variable builtin/blame.c: reduce scope of variables builtin/apply.c: reduce scope of variables bisect.c: reduce scope of variable
-
由 Junio C Hamano 提交于
When we replace broken macros from stdio.h in git-compat-util.h, preprocessor. * bs/stdio-undef-before-redef: git-compat-util.h: #undef (v)snprintf before #define them
-
由 Junio C Hamano 提交于
include.path variable (or any variable that expects a path that can use ~username expansion) in the configuration file is not a boolean, but the code failed to check it. * jk/config-path-include-fix: handle_path_include: don't look at NULL value expand_user_path: do not look at NULL path
-
由 Junio C Hamano 提交于
"git rev-parse --default" without the required option argument did not diagnose it as an error. * ds/rev-parse-required-args: rev-parse: check i before using argv[i] against argc
-
由 Junio C Hamano 提交于
"git diff --quiet -- pathspec1 pathspec2" sometimes did not return correct status value. * nd/diff-quiet-stat-dirty: diff: do not quit early on stat-dirty files diff.c: move diffcore_skip_stat_unmatch core logic out for reuse later
-
由 Junio C Hamano 提交于
Allow "git cmd path/", when the 'path' is where a submodule is bound to the top-level working tree, to match 'path', despite the extra and unnecessary trailing slash. * nd/submodule-pathspec-ending-with-slash: clean: use cache_name_is_other() clean: replace match_pathspec() with dir_path_match() pathspec: pass directory indicator to match_pathspec_item() match_pathspec: match pathspec "foo/" against directory "foo" dir.c: prepare match_pathspec_item for taking more flags pathspec: rename match_pathspec_depth() to match_pathspec() pathspec: convert some match_pathspec_depth() to dir_path_match() pathspec: convert some match_pathspec_depth() to ce_path_match()
-
由 Junio C Hamano 提交于
Allow "merge-recursive" to work in an empty (temporary) working tree again when there are renames involved, correcting an old regression in 1.7.7 era. * bk/refresh-missing-ok-in-merge-recursive: merge-recursive.c: tolerate missing files while refreshing index read-cache.c: extend make_cache_entry refresh flag with options read-cache.c: refactor --ignore-missing implementation t3030-merge-recursive: test known breakage with empty work tree
-
由 Junio C Hamano 提交于
"git pull" learned to pay attention to pull.ff configuration variable. * da/pull-ff-configuration: pull: add --ff-only to the help text pull: add pull.ff configuration
-
由 Junio C Hamano 提交于
Improvements to our hash table to get it to meet the needs of the msysgit fscache project, with some nice performance improvements. * kb/fast-hashmap: name-hash: retire unused index_name_exists() hashmap.h: use 'unsigned int' for hash-codes everywhere test-hashmap.c: drop unnecessary #includes .gitignore: test-hashmap is a generated file read-cache.c: fix memory leaks caused by removed cache entries builtin/update-index.c: cleanup update_one fix 'git update-index --verbose --again' output remove old hash.[ch] implementation name-hash.c: remove cache entries instead of marking them CE_UNHASHED name-hash.c: use new hash map implementation for cache entries name-hash.c: remove unreferenced directory entries name-hash.c: use new hash map implementation for directories diffcore-rename.c: use new hash map implementation diffcore-rename.c: simplify finding exact renames diffcore-rename.c: move code around to prepare for the next patch buitin/describe.c: use new hash map implementation add a hashtable implementation that supports O(1) removal submodule: don't access the .gitmodules cache entry after removing it
-
由 Junio C Hamano 提交于
Introduce commit.gpgsign configuration variable to force every commit to be GPG signed. The variable cannot be overriden from the command line of some of the commands that create commits except for "git commit" and "git commit-tree", but I am not convinced that it is a good idea to sprinkle support for --no-gpg-sign everywhere, which in turn means that this configuration variable may not be such a good idea. * nv/commit-gpgsign-config: test the commit.gpgsign config option commit-tree: add and document --no-gpg-sign commit-tree: add the commit.gpgsign option to sign all commits
-
- 26 2月, 2014 1 次提交
-
-
由 David Kastrup 提交于
The region end can be looked up just like its beginning. Signed-off-by: NDavid Kastrup <dak@gnu.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
- 25 2月, 2014 11 次提交
-
-
由 Eric Sunshine 提交于
db5360f3 (name-hash: refactor polymorphic index_name_exists(); 2013-09-17) split index_name_exists() into index_file_exists() and index_dir_exists() but retained index_name_exists() as a thin wrapper to avoid disturbing possible in-flight topics. Since this change landed in 'master' some time ago and there are no in-flight topics referencing index_name_exists(), retire it. Signed-off-by: NEric Sunshine <sunshine@sunshineco.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Karsten Blees 提交于
Signed-off-by: NKarsten Blees <blees@dcon.de> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nicolas Vigier 提交于
The tests are checking that : - when commit.gpgsign is true, "git commit" creates signed commits - when commit.gpgsign is false, "git commit" creates unsigned commits - when commit.gpgsign is true, "git commit --no-gpg-sign" creates unsigned commits - when commit.gpgsign is true, "git rebase -f" creates signed commits Signed-off-by: NNicolas Vigier <boklm@mars-attacks.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Document how to override commit.gpgsign configuration that is set to true per "git commit" invocation (parse-options machinery lets us say "--no-gpg-sign" to do so). "git commit-tree" does not use parse-options, so manually add the corresponding option for now. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nicolas Vigier 提交于
If you want to GPG sign all your commits, you have to add the -S option all the time. The commit.gpgsign config option allows to sign all commits automatically. Signed-off-by: NNicolas Vigier <boklm@mars-attacks.org> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
When QUICK is set (i.e. with --quiet) we try to do as little work as possible, stopping after seeing the first change. stat-dirty is considered a "change" but it may turn out not, if no actual content is changed. The actual content test is performed too late in the process and the shortcut may be taken prematurely, leading to incorrect return code. Assume we do "git diff --quiet". If we have a stat-dirty file "a" and a really dirty file "b". We break the loop in run_diff_files() and stop after "a" because we have got a "change". Later in diffcore_skip_stat_unmatch() we find out "a" is actually not changed. But there's nothing else in the diff queue, we incorrectly declare "no change", ignoring the fact that "b" is changed. This also happens to "git diff --quiet HEAD" when it hits diff_can_quit_early() in oneway_diff(). This patch does the content test earlier in order to keep going if "a" is unchanged. The test result is cached so that when diffcore_skip_stat_unmatch() is done in the end, we spend no cycles on re-testing "a". Reported-by: NIWAMOTO Toshihiro <iwamoto@valinux.co.jp> Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Nguyễn Thái Ngọc Duy 提交于
Signed-off-by: NNguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Kirill Smelkov 提交于
where "correct paths" stands for paths that are different to all parents. Up until now, we were testing combined diff only on one file, or on several files which were all different (t4038-diff-combined.sh). As recent thinko in "simplify intersect_paths() further" showed, and also, since we are going to rework code for finding paths different to all parents, lets write at least basic tests. Signed-off-by: NKirill Smelkov <kirr@mns.spb.ru> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Junio C Hamano 提交于
Linus once said: I actually wish more people understood the really core low-level kind of coding. Not big, complex stuff like the lockless name lookup, but simply good use of pointers-to-pointers etc. For example, I've seen too many people who delete a singly-linked list entry by keeping track of the "prev" entry, and then to delete the entry, doing something like if (prev) prev->next = entry->next; else list_head = entry->next; and whenever I see code like that, I just go "This person doesn't understand pointers". And it's sadly quite common. People who understand pointers just use a "pointer to the entry pointer", and initialize that with the address of the list_head. And then as they traverse the list, they can remove the entry without using any conditionals, by just doing a "*pp = entry->next". Applying that simplification lets us lose 7 lines from this function even while adding 2 lines of comment. I was tempted to squash this into the original commit, but because the benchmarking described in the commit log is without this simplification, I decided to keep it a separate follow-up patch. Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Kirill Smelkov 提交于
The field was used in order to speed-up name comparison and also to mark removed paths by setting it to 0. Because the updated code does significantly less strcmp and also just removes paths from the list and free right after we know a path will not be needed, it is not needed anymore. Signed-off-by: NKirill Smelkov <kirr@mns.spb.ru> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-
由 Kirill Smelkov 提交于
When generating combined diff, for each commit, we intersect diff paths from diff(parent_0,commit) to diff(parent_i,commit) comparing all paths pairs, i.e. doing it the quadratic way. That is correct, but could be optimized. Paths come from trees in sorted (= tree) order, and so does diff_tree() emits resulting paths in that order too. Now if we look at diffcore transformations, all of them, except diffcore_order, preserve resulting path ordering: - skip_stat_unmatch, grep, pickaxe, filter -- just skip elements -> order stays preserved - break -- just breaks diff for a path, adding path dup after the path -> order stays preserved - detect rename/copy -- resulting paths are emitted sorted (verified empirically) So only diffcore_order changes diff paths ordering. But diffcore_order meaning affects only presentation - i.e. only how to show the diff, so we could do all the internal computations without paths reordering, and order only resultant paths set. This is faster, since, if we know two paths sets are all ordered, their intersection could be done in linear time. This patch does just that. Timings for `git log --raw --no-abbrev --no-renames` without `-c` ("git log") and with `-c` ("git log -c") before and after the patch are as follows: linux.git v3.10..v3.11 log log -c before 1.9s 20.4s after 1.9s 16.6s navy.git (private repo) log log -c before 0.83s 15.6s after 0.83s 2.1s P.S. I think linux.git case is sped up not so much as the second one, since in navy.git, there are more exotic (subtree, etc) merges. P.P.S. My tracing showed that the rest of the time (16.6s vs 1.9s) is usually spent in computing huge diffs from commit to second parent. Will try to deal with it, if I'll have time. P.P.P.S. For combine_diff_path, ->len is not needed anymore - will remove it in the next noisy cleanup path, to maintain good signal/noise ratio here. Signed-off-by: NKirill Smelkov <kirr@mns.spb.ru> Signed-off-by: NJunio C Hamano <gitster@pobox.com>
-