- 24 4月, 2007 17 次提交
-
-
由 Martin Koegler 提交于
Signed-off-by: NMartin Koegler <mkoegler@auto.tuwien.ac.at> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Martin Koegler 提交于
Signed-off-by: NMartin Koegler <mkoegler@auto.tuwien.ac.at> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Martin Koegler 提交于
Each object in struct object_array is extended with the mode. If not specified, S_IFINVALID is used. An object with an mode value can be added with add_object_array_with_mode. Signed-off-by: NMartin Koegler <mkoegler@auto.tuwien.ac.at> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Martin Koegler 提交于
get_sha1_with_mode basically behaves as get_sha1. It has an additional parameter for storing the mode of the object. If the mode can not be determined, it stores S_IFINVALID. Signed-off-by: NMartin Koegler <mkoegler@auto.tuwien.ac.at> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Martin Koegler 提交于
S_IFINVALID is used to signal, that no mode information is available. Signed-off-by: NMartin Koegler <mkoegler@auto.tuwien.ac.at> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
* maint: Documentation/git-reset.txt: suggest git commit --amend in example. Build RPM with ETC_GITCONFIG=/etc/gitconfig Ignore all man sections as they are generated files. Fix typo in git-am: s/Was is/Was it/ Reverse the order of -b and --track in the man page. dir.c(common_prefix): Fix two bugs Conflicts: git.spec.in
-
由 OGAWA Hirofumi 提交于
If $ls_remote_result was too long, git-fetch--tool -s pick-rref "$rref" "$ls_remote_result" in git-fetch will fail with "argument list too long". This patch fixes git-fetch--tool and git-fetch by passing $ls_remote_result via stdin. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Gerrit Pape 提交于
In example 'Undo a commit and redo', refer to 'git commit --amend', as this is the easier alternative. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Brian Gernhardt 提交于
Signed-off-by: NBrian Gernhardt <benji@silverinsanity.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Josh Triplett 提交于
Signed-off-by: NJosh Triplett <josh@freedesktop.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Josh Triplett 提交于
Add a new configuration option clean.requireForce. If set, git-clean will refuse to run, unless forced with the new -f option, or not acting due to -n. Signed-off-by: NJosh Triplett <josh@freedesktop.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Instead of running rev-list and picking earlier lines using head/tail pipeline, grab commit object name as we build commits. This also removes a non POSIX use of tail with -linenum (more posixly-correct way to say it is "-n linenum") Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
A Large Angry SCM (gitzilla) noticed that on an unnamed platform, tail -c wants its byte count as part of the option, not as a separate argument. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Johannes Schindelin 提交于
Now that git-commit got chatty, we have to shut it up again. Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
It is nice to see what is happening when checking out large amount of files, either with git-checkout or git-reset. The new progress code already decides what is a "significant amount" and displays progress only in that case.. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Brian Gernhardt 提交于
Using "-b --track newbranch oldbranch" gives the error: git checkout: updating paths is incompatible with switching branches/forcing However, "--track -b ..." works just fine. Signed-off-by: NBrian Gernhardt <benji@silverinsanity.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 23 4月, 2007 14 次提交
-
-
由 Johannes Schindelin 提交于
The function common_prefix() is used to find the common subdirectory of a couple of pathnames. When checking if the next pathname matches up with the prefix, it incorrectly checked the whole path, not just the prefix (including the slash). Thus, the expensive part of the loop was executed always. The other bug is more serious: if the first and the last pathname in the list have a longer common prefix than the common prefix for _all_ pathnames in the list, the longer one would be chosen. This bug was probably hidden by the fact that bash's wildcard expansion sorts the results, and the code just so happens to work with sorted input. Signed-off-by: NJohannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Martin Koegler 提交于
Currently, gitweb shows only header and footer, if no differences are found. This patch adds a "No differences found" message for the html output. Signed-off-by: NMartin Koegler <mkoegler@auto.tuwien.ac.at> Signed-off-by: NJakub Narebski <jnareb@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
Let's start displaying progress only if more than 50% of total number of files remains to be checked out after 2 seconds. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
This allows for progress to be displayed only if the progress has not reached a specified percentage treshold within a given delay in seconds. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
If the progress bar ends up in a box, better provide a title for it too. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Nicolas Pitre 提交于
Instead of having this code duplicated in multiple places, let's have a common interface for progress display. If someday someone wishes to display a cheezy progress bar instead then only one file will have to be changed. Note: I left merge-recursive.c out since it has a strange notion of progress as it apparently increase the expected total number as it goes. Someone with more intimate knowledge of what that is supposed to mean might look at converting it to the common progress interface. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
This enhances the attributes mechanism so that external programs meant for existing GIT_EXTERNAL_DIFF interface can be specifed per path. To configure such a custom diff driver, first define a custom diff driver in the configuration: [diff "my-c-diff"] command = <<your command string comes here>> Then mark the paths that you want to use this custom driver using the attribute mechanism. *.c diff=my-c-diff The intent of this separation is that the attribute mechanism is used for specifying the type of the contents, while the configuration mechanism is used to define what needs to be done to that type of the contents, which would be specific to both platform and personal taste. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
The earlier quickfix forced world-readable permission bits. This updates it to honor umask and core.sharedrepository settings. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
mkstemp() often creates the file in 0600 which means the resulting packfile is not readable by anybody other than the repository owner. Force 0644 for now, even though this is not strictly correct. Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Alex Riesen 提交于
Reallocated wrong size. Noticed on Ubuntu 7.04 probably because it has some malloc diagnostics in libc: "git-read-tree --reset -u HEAD" aborted in the test. Valgrind sped up the debugging greatly: took me 10 minutes. Signed-off-by: NAlex Riesen <raa.lkml@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Alex Riesen 提交于
Also, noticed by valgrind: the code caused a read out-of-bounds. Some comments updated as well (they still reflected old calling conventions). Signed-off-by: NAlex Riesen <raa.lkml@gmail.com> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
- 22 4月, 2007 9 次提交
-
-
由 Shawn O. Pearce 提交于
I want to add new command line options to cat-file, but to do that we need to change how we handle argv[] first. This is a simple cleanup that assigns names to the two arguments we currently care about. Signed-off-by: NShawn O. Pearce <spearce@spearce.org> Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
Signed-off-by: NJunio C Hamano <junkio@cox.net>
-
由 Junio C Hamano 提交于
* 'lt/objalloc': Clean up object creation to use more common code Use proper object allocators for unknown object nodes too
-
由 Junio C Hamano 提交于
* jc/add: git-add -u: match the index with working tree.
-
由 Junio C Hamano 提交于
* 'jc/attr': (28 commits) lockfile: record the primary process. convert.c: restructure the attribute checking part. Fix bogus linked-list management for user defined merge drivers. Simplify calling of CR/LF conversion routines Document gitattributes(5) Update 'crlf' attribute semantics. Documentation: support manual section (5) - file formats. Simplify code to find recursive merge driver. Counto-fix in merge-recursive Fix funny types used in attribute value representation Allow low-level driver to specify different behaviour during internal merge. Custom low-level merge driver: change the configuration scheme. Allow the default low-level merge driver to be configured. Custom low-level merge driver support. Add a demonstration/test of customized merge. Allow specifying specialized merge-backend per path. merge-recursive: separate out xdl_merge() interface. Allow more than true/false to attributes. Document git-check-attr Change attribute negation marker from '!' to '-'. ...
-
由 Junio C Hamano 提交于
* lt/gitlink: Tests for core subproject support Expose subprojects as special files to "git diff" machinery Fix some "git ls-files -o" fallout from gitlinks Teach "git-read-tree -u" to check out submodules as a directory Teach git list-objects logic to not follow gitlinks Fix gitlink index entry filesystem matching Teach "git-read-tree -u" to check out submodules as a directory Teach git list-objects logic not to follow gitlinks Don't show gitlink directories when we want "other" files Teach git-update-index about gitlinks Teach directory traversal about subprojects Fix thinko in subproject entry sorting Teach core object handling functions about gitlinks Teach "fsck" not to follow subproject links Add "S_IFDIRLNK" file mode infrastructure for git links Add 'resolve_gitlink_ref()' helper function Avoid overflowing name buffer in deep directory structures diff-lib: use ce_mode_from_stat() rather than messing with modes manually
-
由 Junio C Hamano 提交于
* np/pack: (27 commits) document --index-version for index-pack and pack-objects pack-objects: remove obsolete comments pack-objects: better check_object() performances add get_size_from_delta() pack-objects: make in_pack_header_size a variable of its own pack-objects: get rid of create_final_object_list() pack-objects: get rid of reuse_cached_pack pack-objects: clean up list sorting pack-objects: rework check_delta_limit usage pack-objects: equal objects in size should delta against newer objects pack-objects: optimize preferred base handling a bit clean up add_object_entry() tests for various pack index features use test-genrandom in tests instead of /dev/urandom simple random data generator for tests validate reused pack data with CRC when possible allow forcing index v2 and 64-bit offset treshold pack-redundant.c: learn about index v2 show-index.c: learn about index v2 sha1_file.c: learn about index version 2 ...
-