Merge branch 'nd/config-doc-camelCase'

Documentation updates.

* nd/config-doc-camelCase:
  *config.txt: stick to camelCase naming convention

Documentation/CodingGuidelines

@@ -526,7 +526,7 @@ Writing Documentation:
  `backticks around word phrases`, do so.
    `--pretty=oneline`
    `git rev-list`
-   `remote.pushdefault`
+   `remote.pushDefault`
 
  Word phrases enclosed in `backtick characters` are rendered literally
  and will not be further expanded. The use of `backticks` to achieve the

Documentation/blame-options.txt

@@ -4,7 +4,7 @@
 
 --root::
 	Do not treat root commits as boundaries.  This can also be
-	controlled via the `blame.showroot` config option.
+	controlled via the `blame.showRoot` config option.
 
 --show-stats::
 	Include additional statistics at the end of blame output.

Documentation/diff-config.txt

-diff.autorefreshindex::
+diff.autoRefreshIndex::
 	When using 'git diff' to compare with work tree
 	files, do not consider stat-only change as changed.
 	Instead, silently run `git update-index --refresh` to
@@ -75,11 +75,11 @@ diff.ignoreSubmodules::
 	commands such as 'git diff-files'. 'git checkout' also honors
 	this setting when reporting uncommitted changes. Setting it to
 	'all' disables the submodule summary normally shown by 'git commit'
-	and 'git status' when 'status.submodulesummary' is set unless it is
+	and 'git status' when 'status.submoduleSummary' is set unless it is
 	overridden by using the --ignore-submodules command-line option.
 	The 'git submodule' commands are not affected by this setting.
 
-diff.mnemonicprefix::
+diff.mnemonicPrefix::
 	If set, 'git diff' uses a prefix pair that is different from the
 	standard "a/" and "b/" depending on what is being compared.  When
 	this configuration is in effect, reverse diff output also swaps
@@ -98,7 +98,7 @@ diff.mnemonicprefix::
 diff.noprefix::
 	If set, 'git diff' does not show any source or destination prefix.
 
-diff.orderfile::
+diff.orderFile::
 	File indicating how to order files within a diff, using
 	one shell glob pattern per line.
 	Can be overridden by the '-O' option to linkgit:git-diff[1].
@@ -148,7 +148,7 @@ diff.<driver>.textconv::
 	conversion is used to generate a human-readable diff.  See
 	linkgit:gitattributes[5] for details.
 
-diff.<driver>.wordregex::
+diff.<driver>.wordRegex::
 	The regular expression that the diff driver should use to
 	split words in a line.  See linkgit:gitattributes[5] for
 	details.

Documentation/diff-options.txt

@@ -432,8 +432,8 @@ endif::git-format-patch[]
 -O<orderfile>::
 	Output the patch in the order specified in the
 	<orderfile>, which has one shell glob pattern per line.
-	This overrides the `diff.orderfile` configuration variable
-	(see linkgit:git-config[1]).  To cancel `diff.orderfile`,
+	This overrides the `diff.orderFile` configuration variable
+	(see linkgit:git-config[1]).  To cancel `diff.orderFile`,
 	use `-O/dev/null`.
 
 ifndef::git-format-patch[]

Documentation/fetch-options.txt

@@ -68,7 +68,7 @@ endif::git-pull[]
 	By default, tags that point at objects that are downloaded
 	from the remote repository are fetched and stored locally.
 	This option disables this automatic tag following. The default
-	behavior for a remote may be specified with the remote.<name>.tagopt
+	behavior for a remote may be specified with the remote.<name>.tagOpt
 	setting. See linkgit:git-config[1].
 
 ifndef::git-pull[]

Documentation/git-add.txt

@@ -173,7 +173,7 @@ for "git add --no-all <pathspec>...", i.e. ignored removed files.
 Configuration
 -------------
 
-The optional configuration variable `core.excludesfile` indicates a path to a
+The optional configuration variable `core.excludesFile` indicates a path to a
 file containing patterns of file names to exclude from git-add, similar to
 $GIT_DIR/info/exclude.  Patterns in the exclude file are used in addition to
 those in info/exclude.  See linkgit:gitignore[5].
@@ -317,7 +317,7 @@ After deciding the fate for all hunks, if there is any hunk
 that was chosen, the index is updated with the selected hunks.
 +
 You can omit having to type return here, by setting the configuration
-variable `interactive.singlekey` to `true`.
+variable `interactive.singleKey` to `true`.
 
 diff::
 

Documentation/git-apply.txt

@@ -242,7 +242,7 @@ has no effect when `--index` or `--cached` is in use.
 Configuration
 -------------
 
-apply.ignorewhitespace::
+apply.ignoreWhitespace::
 	Set to 'change' if you want changes in whitespace to be ignored by default.
 	Set to one of: no, none, never, false if you want changes in
 	whitespace to be significant.

Documentation/git-branch.txt

@@ -51,7 +51,7 @@ When a local branch is started off a remote-tracking branch, Git sets up the
 branch (specifically the `branch.<name>.remote` and `branch.<name>.merge`
 configuration entries) so that 'git pull' will appropriately merge from
 the remote-tracking branch. This behavior may be changed via the global
-`branch.autosetupmerge` configuration flag. That setting can be
+`branch.autoSetupMerge` configuration flag. That setting can be
 overridden by using the `--track` and `--no-track` options, and
 changed later using `git branch --set-upstream-to`.
 
@@ -166,14 +166,14 @@ This option is only applicable in non-verbose mode.
 	upstream when the new branch is checked out.
 +
 This behavior is the default when the start point is a remote-tracking branch.
-Set the branch.autosetupmerge configuration variable to `false` if you
+Set the branch.autoSetupMerge configuration variable to `false` if you
 want `git checkout` and `git branch` to always behave as if '--no-track'
 were given. Set it to `always` if you want this behavior when the
 start-point is either a local or remote-tracking branch.
 
 --no-track::
 	Do not set up "upstream" configuration, even if the
-	branch.autosetupmerge configuration variable is true.
+	branch.autoSetupMerge configuration variable is true.
 
 --set-upstream::
 	If specified branch does not exist yet or if `--force` has been

Documentation/git-check-ignore.txt

@@ -72,7 +72,7 @@ matching pattern, <source> is the pattern's source file, and <linenum>
 is the line number of the pattern within that source.  If the pattern
 contained a `!` prefix or `/` suffix, it will be preserved in the
 output.  <source> will be an absolute path when referring to the file
-configured by `core.excludesfile`, or relative to the repository root
+configured by `core.excludesFile`, or relative to the repository root
 when referring to `.git/info/exclude` or a per-directory exclude file.
 
 If `-z` is specified, the pathnames in the output are delimited by the

Documentation/git-checkout.txt

@@ -144,7 +144,7 @@ explicitly give a name with '-b' in such a case.
 
 --no-track::
 	Do not set up "upstream" configuration, even if the
-	branch.autosetupmerge configuration variable is true.
+	branch.autoSetupMerge configuration variable is true.
 
 -l::
 	Create the new branch's reflog; see linkgit:git-branch[1] for
@@ -210,7 +210,7 @@ the conflicted merge in the specified paths.
 --conflict=<style>::
 	The same as --merge option above, but changes the way the
 	conflicting hunks are presented, overriding the
-	merge.conflictstyle configuration variable.  Possible values are
+	merge.conflictStyle configuration variable.  Possible values are
 	"merge" (default) and "diff3" (in addition to what is shown by
 	"merge" style, shows the original contents).
 

Documentation/git-commit-tree.txt

@@ -59,7 +59,7 @@ OPTIONS
 	GPG-sign commit.
 
 --no-gpg-sign::
-	Countermand `commit.gpgsign` configuration variable that is
+	Countermand `commit.gpgSign` configuration variable that is
 	set to force each and every commit to be signed.
 
 

Documentation/git-commit.txt

@@ -314,7 +314,7 @@ changes to tracked files.
 	GPG-sign commit.
 
 --no-gpg-sign::
-	Countermand `commit.gpgsign` configuration variable that is
+	Countermand `commit.gpgSign` configuration variable that is
 	set to force each and every commit to be signed.
 
 \--::

Documentation/git-config.txt

@@ -405,7 +405,7 @@ true
 % git config --bool --get-urlmatch http.sslverify https://weak.example.com
 false
 % git config --get-urlmatch http https://weak.example.com
-http.cookiefile /tmp/cookie.txt
+http.cookieFile /tmp/cookie.txt
 http.sslverify false
 ------------
 

Documentation/git-cvsserver.txt

@@ -154,7 +154,7 @@ with CVS_SERVER (and shouldn't) as 'git-shell' understands `cvs` to mean
    [gitcvs]
         enabled=1
         # optional for debugging
-        logfile=/path/to/logfile
+	logFile=/path/to/logfile
 
 ------
 Note: you need to ensure each user that is going to invoke 'git-cvsserver' has
@@ -254,14 +254,14 @@ Configuring database backend
 its documentation if changing these variables, especially
 about `DBI->connect()`.
 
-gitcvs.dbname::
+gitcvs.dbName::
 	Database name. The exact meaning depends on the
 	selected database driver, for SQLite this is a filename.
 	Supports variable substitution (see below). May
 	not contain semicolons (`;`).
 	Default: '%Ggitcvs.%m.sqlite'
 
-gitcvs.dbdriver::
+gitcvs.dbDriver::
 	Used DBI driver. You can specify any available driver
 	for this here, but it might not work. cvsserver is tested
 	with 'DBD::SQLite', reported to work with
@@ -271,12 +271,12 @@ gitcvs.dbdriver::
 	Default: 'SQLite'
 
 gitcvs.dbuser::
-	Database user. Only useful if setting `dbdriver`, since
+	Database user. Only useful if setting `dbDriver`, since
 	SQLite has no concept of database users. Supports variable
 	substitution (see below).
 
-gitcvs.dbpass::
-	Database password.  Only useful if setting `dbdriver`, since
+gitcvs.dbPass::
+	Database password.  Only useful if setting `dbDriver`, since
 	SQLite has no concept of database passwords.
 
 gitcvs.dbTableNamePrefix::
@@ -288,7 +288,7 @@ All variables can also be set per access method, see <<configaccessmethod,above>
 
 Variable substitution
 ^^^^^^^^^^^^^^^^^^^^^
-In `dbdriver` and `dbuser` you can use the following variables:
+In `dbDriver` and `dbUser` you can use the following variables:
 
 %G::
 	Git directory name
@@ -413,16 +413,16 @@ about end-of-line conversion.
 
 Alternatively, if `gitcvs.usecrlfattr` config is not enabled
 or the attributes do not allow automatic detection for a filename, then
-the server uses the `gitcvs.allbinary` config for the default setting.
-If `gitcvs.allbinary` is set, then file not otherwise
+the server uses the `gitcvs.allBinary` config for the default setting.
+If `gitcvs.allBinary` is set, then file not otherwise
 specified will default to '-kb' mode. Otherwise the '-k' mode
-is left blank. But if `gitcvs.allbinary` is set to "guess", then
+is left blank. But if `gitcvs.allBinary` is set to "guess", then
 the correct '-k' mode will be guessed based on the contents of
 the file.
 
 For best consistency with 'cvs', it is probably best to override the
 defaults by setting `gitcvs.usecrlfattr` to true,
-and `gitcvs.allbinary` to "guess".
+and `gitcvs.allBinary` to "guess".
 
 Dependencies
 ------------

Documentation/git-fetch.txt

@@ -26,7 +26,7 @@ By default, any tag that points into the histories being fetched is
 also fetched; the effect is to fetch tags that
 point at branches that you are interested in.  This default behavior
 can be changed by using the --tags or --no-tags options or by
-configuring remote.<name>.tagopt.  By using a refspec that fetches tags
+configuring remote.<name>.tagOpt.  By using a refspec that fetches tags
 explicitly, you can fetch tags that do not point into branches you
 are interested in as well.
 

Documentation/git-format-patch.txt

@@ -273,13 +273,13 @@ attachments, and sign off patches with configuration variables.
 ------------
 [format]
 	headers = "Organization: git-foo\n"
-	subjectprefix = CHANGE
+	subjectPrefix = CHANGE
 	suffix = .txt
 	numbered = auto
 	to = <email>
 	cc = <email>
 	attach [ = mime-boundary-string ]
-	signoff = true
+	signOff = true
 	coverletter = auto
 ------------
 

Documentation/git-gc.txt

@@ -54,10 +54,10 @@ all loose objects are combined into a single pack using
 `git repack -d -l`.  Setting the value of `gc.auto` to 0
 disables automatic packing of loose objects.
 +
-If the number of packs exceeds the value of `gc.autopacklimit`,
+If the number of packs exceeds the value of `gc.autoPackLimit`,
 then existing packs (except those marked with a `.keep` file)
 are consolidated into a single pack by using the `-A` option of
-'git repack'. Setting `gc.autopacklimit` to 0 disables
+'git repack'. Setting `gc.autoPackLimit` to 0 disables
 automatic consolidation of packs.
 
 --prune=<date>::
@@ -101,18 +101,18 @@ branches:
 ------------
 [gc "refs/remotes/*"]
 	reflogExpire = never
-	reflogexpireUnreachable = 3 days
+	reflogExpireUnreachable = 3 days
 ------------
 
-The optional configuration variable 'gc.rerereresolved' indicates
+The optional configuration variable 'gc.rerereResolved' indicates
 how long records of conflicted merge you resolved earlier are
 kept.  This defaults to 60 days.
 
-The optional configuration variable 'gc.rerereunresolved' indicates
+The optional configuration variable 'gc.rerereUnresolved' indicates
 how long records of conflicted merge you have not resolved are
 kept.  This defaults to 15 days.
 
-The optional configuration variable 'gc.packrefs' determines if
+The optional configuration variable 'gc.packRefs' determines if
 'git gc' runs 'git pack-refs'. This can be set to "notbare" to enable
 it within all non-bare repos or it can be set to a boolean value.
 This defaults to true.

Documentation/git-init.txt

@@ -125,7 +125,7 @@ The template directory will be one of the following (in order):
 
  - the contents of the `$GIT_TEMPLATE_DIR` environment variable;
 
- - the `init.templatedir` configuration variable; or
+ - the `init.templateDir` configuration variable; or
 
  - the default template directory: `/usr/share/git-core/templates`.
 

Documentation/git-instaweb.txt

@@ -76,7 +76,7 @@ You may specify configuration in your .git/config
 	httpd = apache2 -f
 	port = 4321
 	browser = konqueror
-	modulepath = /usr/lib/apache2/modules
+	modulePath = /usr/lib/apache2/modules
 
 -----------------------------------------------------------------------
 

Documentation/git-log.txt

@@ -184,7 +184,7 @@ log.date::
 	`--date` option.)  Defaults to "default", which means to write
 	dates like `Sat May 8 19:35:34 2010 -0500`.
 
-log.showroot::
+log.showRoot::
 	If `false`, `git log` and related commands will not treat the
 	initial commit as a big creation event.  Any root commits in
 	`git log -p` output would be shown without a diff attached.

Documentation/git-merge.txt

@@ -232,7 +232,7 @@ Barbie's remark on your side.  The only thing you can tell is that your
 side wants to say it is hard and you'd prefer to go shopping, while the
 other side wants to claim it is easy.
 
-An alternative style can be used by setting the "merge.conflictstyle"
+An alternative style can be used by setting the "merge.conflictStyle"
 configuration variable to "diff3".  In "diff3" style, the above conflict
 may look like this:
 
@@ -329,7 +329,7 @@ CONFIGURATION
 -------------
 include::merge-config.txt[]
 
-branch.<name>.mergeoptions::
+branch.<name>.mergeOptions::
 	Sets default options for merging into branch <name>. The syntax and
 	supported options are the same as those of 'git merge', but option
 	values containing whitespace characters are currently not supported.

Documentation/git-pull.txt

@@ -117,7 +117,7 @@ locally created merge commits will not be flattened.
 +
 When false, merge the current branch into the upstream branch.
 +
-See `pull.rebase`, `branch.<name>.rebase` and `branch.autosetuprebase` in
+See `pull.rebase`, `branch.<name>.rebase` and `branch.autoSetupRebase` in
 linkgit:git-config[1] if you want to make `git pull` always use
 `--rebase` instead of merging.
 +

Documentation/git-rebase.txt

@@ -207,10 +207,10 @@ rebase.stat::
 	Whether to show a diffstat of what changed upstream since the last
 	rebase. False by default.
 
-rebase.autosquash::
+rebase.autoSquash::
 	If set to true enable '--autosquash' option by default.
 
-rebase.autostash::
+rebase.autoStash::
 	If set to true enable '--autostash' option by default.
 
 OPTIONS
@@ -414,7 +414,7 @@ squash/fixup series.
 This option is only valid when the '--interactive' option is used.
 +
 If the '--autosquash' option is enabled by default using the
-configuration variable `rebase.autosquash`, this option can be
+configuration variable `rebase.autoSquash`, this option can be
 used to override and disable this setting.
 
 --[no-]autostash::

Documentation/git-receive-pack.txt

@@ -100,7 +100,7 @@ the following environment variables:
 	starting time is different by this many seconds from the
 	current session.  Only meaningful when
 	`GIT_PUSH_CERT_NONCE_STATUS` says `SLOP`.
-	Also read about `receive.certnonceslop` variable in
+	Also read about `receive.certNonceSlop` variable in
 	linkgit:git-config[1].
 
 This hook is called before any refname is updated and before any

Documentation/git-repack.txt

@@ -115,7 +115,7 @@ other objects in that pack they already have locally.
 	Write a reachability bitmap index as part of the repack. This
 	only makes sense when used with `-a` or `-A`, as the bitmaps
 	must be able to refer to all reachable objects. This option
-	overrides the setting of `pack.writebitmaps`.
+	overrides the setting of `pack.writeBitmaps`.
 
 --pack-kept-objects::
 	Include objects in `.keep` files when repacking.  Note that we
@@ -123,7 +123,7 @@ other objects in that pack they already have locally.
 	This means that we may duplicate objects, but this makes the
 	option safe to use when there are concurrent pushes or fetches.
 	This option is generally only useful if you are writing bitmaps
-	with `-b` or `pack.writebitmaps`, as it ensures that the
+	with `-b` or `pack.writeBitmaps`, as it ensures that the
 	bitmapped packfile has the necessary objects.
 
 Configuration

Documentation/git-rerere.txt

@@ -69,7 +69,7 @@ Prune records of conflicted merges that
 occurred a long time ago.  By default, unresolved conflicts older
 than 15 days and resolved conflicts older than 60
 days are pruned.  These defaults are controlled via the
-`gc.rerereunresolved` and `gc.rerereresolved` configuration
+`gc.rerereUnresolved` and `gc.rerereResolved` configuration
 variables respectively.
 
 

Documentation/git-send-email.txt

@@ -47,7 +47,7 @@ Composing
 --annotate::
 	Review and edit each patch you're about to send. Default is the value
 	of 'sendemail.annotate'. See the CONFIGURATION section for
-	'sendemail.multiedit'.
+	'sendemail.multiEdit'.
 
 --bcc=<address>::
 	Specify a "Bcc:" value for each email. Default is the value of
@@ -73,7 +73,7 @@ and In-Reply-To headers will be used unless they are removed.
 +
 Missing From or In-Reply-To headers will be prompted for.
 +
-See the CONFIGURATION section for 'sendemail.multiedit'.
+See the CONFIGURATION section for 'sendemail.multiEdit'.
 
 --from=<address>::
 	Specify the sender of the emails.  If not specified on the command line,
@@ -156,31 +156,31 @@ Sending
 	subscribed to a list. In order to use the 'From' address, set the
 	value to "auto". If you use the sendmail binary, you must have
 	suitable privileges for the -f parameter.  Default is the value of the
-	'sendemail.envelopesender' configuration variable; if that is
+	'sendemail.envelopeSender' configuration variable; if that is
 	unspecified, choosing the envelope sender is left to your MTA.
 
 --smtp-encryption=<encryption>::
 	Specify the encryption to use, either 'ssl' or 'tls'.  Any other
 	value reverts to plain SMTP.  Default is the value of
-	'sendemail.smtpencryption'.
+	'sendemail.smtpEncryption'.
 
 --smtp-domain=<FQDN>::
 	Specifies the Fully Qualified Domain Name (FQDN) used in the
 	HELO/EHLO command to the SMTP server.  Some servers require the
 	FQDN to match your IP address.  If not set, git send-email attempts
 	to determine your FQDN automatically.  Default is the value of
-	'sendemail.smtpdomain'.
+	'sendemail.smtpDomain'.
 
 --smtp-pass[=<password>]::
 	Password for SMTP-AUTH. The argument is optional: If no
 	argument is specified, then the empty string is used as
-	the password. Default is the value of 'sendemail.smtppass',
+	the password. Default is the value of 'sendemail.smtpPass',
 	however '--smtp-pass' always overrides this value.
 +
 Furthermore, passwords need not be specified in configuration files
 or on the command line. If a username has been specified (with
-'--smtp-user' or a 'sendemail.smtpuser'), but no password has been
-specified (with '--smtp-pass' or 'sendemail.smtppass'), then
+'--smtp-user' or a 'sendemail.smtpUser'), but no password has been
+specified (with '--smtp-pass' or 'sendemail.smtpPass'), then
 a password is obtained using 'git-credential'.
 
 --smtp-server=<host>::
@@ -188,7 +188,7 @@ a password is obtained using 'git-credential'.
 	`smtp.example.com` or a raw IP address).  Alternatively it can
 	specify a full pathname of a sendmail-like program instead;
 	the program must support the `-i` option.  Default value can
-	be specified by the 'sendemail.smtpserver' configuration
+	be specified by the 'sendemail.smtpServer' configuration
 	option; the built-in default is `/usr/sbin/sendmail` or
 	`/usr/lib/sendmail` if such program is available, or
 	`localhost` otherwise.
@@ -199,11 +199,11 @@ a password is obtained using 'git-credential'.
 	submission port 587, or the common SSL smtp port 465);
 	symbolic port names (e.g. "submission" instead of 587)
 	are also accepted. The port can also be set with the
-	'sendemail.smtpserverport' configuration variable.
+	'sendemail.smtpServerPort' configuration variable.
 
 --smtp-server-option=<option>::
 	If set, specifies the outgoing SMTP server option to use.
-	Default value can be specified by the 'sendemail.smtpserveroption'
+	Default value can be specified by the 'sendemail.smtpServerOption'
 	configuration option.
 +
 The --smtp-server-option option must be repeated for each option you want
@@ -225,8 +225,8 @@ must be used for each option.
 	be the best choice on most platforms).
 
 --smtp-user=<user>::
-	Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser';
-	if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'),
+	Username for SMTP-AUTH. Default is the value of 'sendemail.smtpUser';
+	if a username is not specified (with '--smtp-user' or 'sendemail.smtpUser'),
 	then authentication is not attempted.
 
 --smtp-debug=0|1::
@@ -247,14 +247,14 @@ Automating
 	Specify a command to execute once per patch file which
 	should generate patch file specific "Cc:" entries.
 	Output of this command must be single email address per line.
-	Default is the value of 'sendemail.cccmd' configuration value.
+	Default is the value of 'sendemail.ccCmd' configuration value.
 
 --[no-]chain-reply-to::
 	If this is set, each email will be sent as a reply to the previous
 	email sent.  If disabled with "--no-chain-reply-to", all emails after
 	the first will be sent as replies to the first email sent.  When using
 	this, it is recommended that the first file given be an overview of the
-	entire patch series. Disabled by default, but the 'sendemail.chainreplyto'
+	entire patch series. Disabled by default, but the 'sendemail.chainReplyTo'
 	configuration variable can be used to enable it.
 
 --identity=<identity>::
@@ -304,7 +304,7 @@ specified, as well as 'body' if --no-signed-off-cc is specified.
 
 --[no-]suppress-from::
 	If this is set, do not add the From: address to the cc: list.
-	Default is the value of 'sendemail.suppressfrom' configuration
+	Default is the value of 'sendemail.suppressFrom' configuration
 	value; if that is unspecified, default to --no-suppress-from.
 
 --[no-]thread::
@@ -377,15 +377,15 @@ default to '--validate'.
 CONFIGURATION
 -------------
 
-sendemail.aliasesfile::
+sendemail.aliasesFile::
 	To avoid typing long email addresses, point this to one or more
-	email aliases files.  You must also supply 'sendemail.aliasfiletype'.
+	email aliases files.  You must also supply 'sendemail.aliasFileType'.
 
-sendemail.aliasfiletype::
-	Format of the file(s) specified in sendemail.aliasesfile. Must be
+sendemail.aliasFileType::
+	Format of the file(s) specified in sendemail.aliasesFile. Must be
 	one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus'.
 
-sendemail.multiedit::
+sendemail.multiEdit::
 	If true (default), a single editor instance will be spawned to edit
 	files you have to edit (patches when '--annotate' is used, and the
 	summary when '--compose' is used). If false, files will be edited one
@@ -404,10 +404,10 @@ To use 'git send-email' to send your patches through the GMail SMTP server,
 edit ~/.gitconfig to specify your account settings:
 
 	[sendemail]
-		smtpencryption = tls
-		smtpserver = smtp.gmail.com
-		smtpuser = yourname@gmail.com
-		smtpserverport = 587
+		smtpEncryption = tls
+		smtpServer = smtp.gmail.com
+		smtpUser = yourname@gmail.com
+		smtpServerPort = 587
 
 Once your commits are ready to be sent to the mailing list, run the
 following commands:

Documentation/git-status.txt

@@ -77,7 +77,7 @@ configuration variable documented in linkgit:git-config[1].
 	only changes to the commits stored in the superproject are shown (this was
 	the behavior before 1.7.0). Using "all" hides all changes to submodules
 	(and suppresses the output of submodule summaries when the config option
-	`status.submodulesummary` is set).
+	`status.submoduleSummary` is set).
 
 --ignored::
 	Show ignored files as well.
@@ -207,7 +207,7 @@ If the config variable `status.relativePaths` is set to false, then all
 paths shown are relative to the repository root, not to the current
 directory.
 
-If `status.submodulesummary` is set to a non zero number or true (identical
+If `status.submoduleSummary` is set to a non zero number or true (identical
 to -1 or an unlimited number), the submodule summary will be enabled for
 the long format and a summary of commits for modified submodules will be
 shown (see --summary-limit option of linkgit:git-submodule[1]). Please note

Documentation/git-tag.txt

@@ -161,7 +161,7 @@ it in the repository configuration as follows:
 
 -------------------------------------
 [user]
-    signingkey = <gpg-key-id>
+    signingKey = <gpg-key-id>
 -------------------------------------
 
 

Documentation/git.txt

@@ -919,7 +919,7 @@ for further details.
 	If this environment variable is set, then Git commands which need to
 	acquire passwords or passphrases (e.g. for HTTP or IMAP authentication)
 	will call this program with a suitable prompt as command-line argument
-	and read the password from its STDOUT. See also the 'core.askpass'
+	and read the password from its STDOUT. See also the 'core.askPass'
 	option in linkgit:git-config[1].
 
 'GIT_TERMINAL_PROMPT'::

Documentation/gitattributes.txt

@@ -80,7 +80,7 @@ Attributes which should be version-controlled and distributed to other
 repositories (i.e., attributes of interest to all users) should go into
 `.gitattributes` files. Attributes that should affect all repositories
 for a single user should be placed in a file specified by the
-`core.attributesfile` configuration option (see linkgit:git-config[1]).
+`core.attributesFile` configuration option (see linkgit:git-config[1]).
 Its default value is $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME
 is either not set or empty, $HOME/.config/git/attributes is used instead.
 Attributes for all users on a system should be placed in the

Documentation/gitcredentials.txt

@@ -32,7 +32,7 @@ strategies to ask the user for usernames and passwords:
    to the program on the command line, and the user's input is read
    from its standard output.
 
-2. Otherwise, if the `core.askpass` configuration variable is set, its
+2. Otherwise, if the `core.askPass` configuration variable is set, its
    value is used as above.
 
 3. Otherwise, if the `SSH_ASKPASS` environment variable is set, its

Documentation/gitignore.txt

@@ -38,7 +38,7 @@ precedence, the last matching pattern decides the outcome):
  * Patterns read from `$GIT_DIR/info/exclude`.
 
  * Patterns read from the file specified by the configuration
-   variable 'core.excludesfile'.
+   variable 'core.excludesFile'.
 
 Which file to place a pattern in depends on how the pattern is meant to
 be used.
@@ -56,7 +56,7 @@ be used.
  * Patterns which a user wants Git to
    ignore in all situations (e.g., backup or temporary files generated by
    the user's editor of choice) generally go into a file specified by
-   `core.excludesfile` in the user's `~/.gitconfig`. Its default value is
+   `core.excludesFile` in the user's `~/.gitconfig`. Its default value is
    $XDG_CONFIG_HOME/git/ignore. If $XDG_CONFIG_HOME is either not set or
    empty, $HOME/.config/git/ignore is used instead.
 

Documentation/gitweb.conf.txt

@@ -706,7 +706,7 @@ show-sizes::
 	I/O.  Enabled by default.
 +
 This feature can be configured on a per-repository basis via
-repository's `gitweb.showsizes` configuration variable (boolean).
+repository's `gitweb.showSizes` configuration variable (boolean).
 
 patches::
 	Enable and configure "patches" view, which displays list of commits in email

Documentation/merge-config.txt

-merge.conflictstyle::
+merge.conflictStyle::
 	Specify the style in which conflicted hunks are written out to
 	working tree files upon merge.  The default is "merge", which
 	shows a `<<<<<<<` conflict marker, changes made by one side,

Documentation/user-manual.txt

@@ -1200,7 +1200,7 @@ for other users who clone your repository.
 If you wish the exclude patterns to affect only certain repositories
 (instead of every repository for a given project), you may instead put
 them in a file in your repository named `.git/info/exclude`, or in any
-file specified by the `core.excludesfile` configuration variable.
+file specified by the `core.excludesFile` configuration variable.
 Some Git commands can also take exclude patterns directly on the
 command line.  See linkgit:gitignore[5] for the details.