- 30 9月, 2015 5 次提交
-
-
由 Eric Dumazet 提交于
These functions do not change the listener socket. Goal is to make sure tcp_conn_request() is not messing with listener in a racy way. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We'll soon no longer hold listener socket lock, these functions do not modify the socket in any way. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Factorize code to get tcp header from skb. It makes no sense to duplicate code in callers. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Once we realize tcp_rcv_synsent_state_process() does not use its 'len' argument and we get rid of it, then it becomes clear this argument is no longer used in tcp_rcv_state_process() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
None of these functions need to change the socket, make it const. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 9月, 2015 3 次提交
-
-
由 Eric Dumazet 提交于
This documents fact that listener lock might not be held at the time SYNACK are sent. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When TCP new listener is done, these functions will be called without socket lock being held. Make sure they don't change anything. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Soon, listener socket spinlock will no longer be held, add const arguments to tcp_v[46]_init_req() to make clear these functions can not mess socket fields. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 9月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
Neal suggested to move sk_txhash init into tcp_create_openreq_child(), called both from IPv4 and IPv6. This opportunity was missed in commit 58d607d3 ("tcp: provide skb->hash to synack packets") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 9月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
In commit b73c3d0e ("net: Save TX flow hash in sock and set in skbuf on xmit"), Tom provided a l4 hash to most outgoing TCP packets. We'd like to provide one as well for SYNACK packets, so that all packets of a given flow share same txhash, to later enable bonding driver to also use skb->hash to perform slave selection. Note that a SYNACK retransmit shuffles the tx hash, as Tom did in commit 265f94ff ("net: Recompute sk_txhash on negative routing advice") for established sockets. This has nice effect making TCP flows resilient to some kind of black holes, even at connection establish phase. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Tom Herbert <tom@herbertland.com> Cc: Mahesh Bandewar <maheshb@google.com> Acked-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 8月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
In commit b357a364 ("inet: fix possible panic in reqsk_queue_unlink()"), I missed fact that tcp_check_req() can return the listener socket in one case, and that we must release the request socket refcount or we leak it. Tested: Following packetdrill test template shows the issue 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 2920 <mss 1460,sackOK,nop,nop> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK> +.002 < . 1:1(0) ack 21 win 2920 +0 > R 21:21(0) Fixes: b357a364 ("inet: fix possible panic in reqsk_queue_unlink()") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 7月, 2015 1 次提交
-
-
由 Tom Herbert 提交于
This patch creates sk_set_txhash and eliminates protocol specific inet_set_txhash and ip6_set_txhash. sk_set_txhash simply sets a random number instead of performing flow dissection. sk_set_txash is also allowed to be called multiple times for the same socket, we'll need this when redoing the hash for negative routing advice. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 7月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
inet_twsk_deschedule() calls are followed by inet_twsk_put(). Only particular case is in inet_twsk_purge() but there is no point to defer the inet_twsk_put() after re-enabling BH. Lets rename inet_twsk_deschedule() to inet_twsk_deschedule_put() and move the inet_twsk_put() inside. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 6月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
For same reasons than in commit 12e25e10 ("tcp: remove redundant checks"), we can remove redundant checks done for timewait sockets. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 6月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
tcp_v4_rcv() checks the following before calling tcp_v4_do_rcv(): if (th->doff < sizeof(struct tcphdr) / 4) goto bad_packet; if (!pskb_may_pull(skb, th->doff * 4)) goto discard_it; So following check in tcp_v4_do_rcv() is redundant and "goto csum_err;" is wrong anyway. if (skb->len < tcp_hdrlen(skb) || ...) goto csum_err; A second check can be removed after no_tcp_socket label for same reason. Same tests can be removed in tcp_v6_do_rcv() Note : short tcp frames are not properly accounted in tcpInErrs MIB, because pskb_may_pull() failure simply drops incoming skb, we might fix this in a separate patch. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 5月, 2015 1 次提交
-
-
由 Marcelo Ricardo Leitner 提交于
This patch tracks the total number of inbound and outbound segments on a TCP socket. One may use this number to have an idea on connection quality when compared against the retransmissions. RFC4898 named these : tcpEStatsPerfSegsIn and tcpEStatsPerfSegsOut These are a 32bit field each and can be fetched both from TCP_INFO getsockopt() if one has a handle on a TCP socket, or from inet_diag netlink facility (iproute2/ss patch will follow) Note that tp->segs_out was placed near tp->snd_nxt for good data locality and minimal performance impact, while tp->segs_in was placed near tp->bytes_received for the same reason. Join work with Eric Dumazet. Note that received SYN are accounted on the listener, but sent SYNACK are not accounted. Signed-off-by: NMarcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 5月, 2015 1 次提交
-
-
由 Daniel Borkmann 提交于
This work as a follow-up of commit f7b3bec6 ("net: allow setting ecn via routing table") and adds RFC3168 section 6.1.1.1. fallback for outgoing ECN connections. In other words, this work adds a retry with a non-ECN setup SYN packet, as suggested from the RFC on the first timeout: [...] A host that receives no reply to an ECN-setup SYN within the normal SYN retransmission timeout interval MAY resend the SYN and any subsequent SYN retransmissions with CWR and ECE cleared. [...] Schematic client-side view when assuming the server is in tcp_ecn=2 mode, that is, Linux default since 2009 via commit 255cac91 ("tcp: extend ECN sysctl to allow server-side only ECN"): 1) Normal ECN-capable path: SYN ECE CWR -----> <----- SYN ACK ECE ACK -----> 2) Path with broken middlebox, when client has fallback: SYN ECE CWR ----X crappy middlebox drops packet (timeout, rtx) SYN -----> <----- SYN ACK ACK -----> In case we would not have the fallback implemented, the middlebox drop point would basically end up as: SYN ECE CWR ----X crappy middlebox drops packet (timeout, rtx) SYN ECE CWR ----X crappy middlebox drops packet (timeout, rtx) SYN ECE CWR ----X crappy middlebox drops packet (timeout, rtx) In any case, it's rather a smaller percentage of sites where there would occur such additional setup latency: it was found in end of 2014 that ~56% of IPv4 and 65% of IPv6 servers of Alexa 1 million list would negotiate ECN (aka tcp_ecn=2 default), 0.42% of these webservers will fail to connect when trying to negotiate with ECN (tcp_ecn=1) due to timeouts, which the fallback would mitigate with a slight latency trade-off. Recent related paper on this topic: Brian Trammell, Mirja Kühlewind, Damiano Boppart, Iain Learmonth, Gorry Fairhurst, and Richard Scheffenegger: "Enabling Internet-Wide Deployment of Explicit Congestion Notification." Proc. PAM 2015, New York. http://ecn.ethz.ch/ecn-pam15.pdf Thus, when net.ipv4.tcp_ecn=1 is being set, the patch will perform RFC3168, section 6.1.1.1. fallback on timeout. For users explicitly not wanting this which can be in DC use case, we add a net.ipv4.tcp_ecn_fallback knob that allows for disabling the fallback. tp->ecn_flags are not being cleared in tcp_ecn_clear_syn() on output, but rather we let tcp_ecn_rcv_synack() take that over on input path in case a SYN ACK ECE was delayed. Thus a spurious SYN retransmission will not prevent ECN being negotiated eventually in that case. Reference: https://www.ietf.org/proceedings/92/slides/slides-92-iccrg-1.pdf Reference: https://www.ietf.org/proceedings/89/slides/slides-89-tsvarea-1.pdfSigned-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NMirja Kühlewind <mirja.kuehlewind@tik.ee.ethz.ch> Signed-off-by: NBrian Trammell <trammell@tik.ee.ethz.ch> Cc: Eric Dumazet <edumazet@google.com> Cc: Dave That <dave.taht@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 5月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
This patch allows a server application to get the TCP SYN headers for its passive connections. This is useful if the server is doing fingerprinting of clients based on SYN packet contents. Two socket options are added: TCP_SAVE_SYN and TCP_SAVED_SYN. The first is used on a socket to enable saving the SYN headers for child connections. This can be set before or after the listen() call. The latter is used to retrieve the SYN headers for passive connections, if the parent listener has enabled TCP_SAVE_SYN. TCP_SAVED_SYN is read once, it frees the saved SYN headers. The data returned in TCP_SAVED_SYN are network (IPv4/IPv6) and TCP headers. Original patch was written by Tom Herbert, I changed it to not hold a full skb (and associated dst and conntracking reference). We have used such patch for about 3 years at Google. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Tested-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
[ 3897.923145] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [ 3897.931025] IP: [<ffffffffa9f27686>] reqsk_timer_handler+0x1a6/0x243 There is a race when reqsk_timer_handler() and tcp_check_req() call inet_csk_reqsk_queue_unlink() on the same req at the same time. Before commit fa76ce73 ("inet: get rid of central tcp/dccp listener timer"), listener spinlock was held and race could not happen. To solve this bug, we change reqsk_queue_unlink() to not assume req must be found, and we return a status, to conditionally release a refcount on the request sock. This also means tcp_check_req() in non fastopen case might or not consume req refcount, so tcp_v6_hnd_req() & tcp_v4_hnd_req() have to properly handle this. (Same remark for dccp_check_req() and its callers) inet_csk_reqsk_queue_drop() is now too big to be inlined, as it is called 4 times in tcp and 3 times in dccp. Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 4月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
Using a timer wheel for timewait sockets was nice ~15 years ago when memory was expensive and machines had a single processor. This does not scale, code is ugly and source of huge latencies (Typically 30 ms have been seen, cpus spinning on death_lock spinlock.) We can afford to use an extra 64 bytes per timewait sock and spread timewait load to all cpus to have better behavior. Tested: On following test, /proc/sys/net/ipv4/tcp_tw_recycle is set to 1 on the target (lpaa24) Before patch : lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 419594 lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 437171 While test is running, we can observe 25 or even 33 ms latencies. lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 20601ms rtt min/avg/max/mdev = 0.020/0.217/25.771/1.535 ms, pipe 2 lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 20702ms rtt min/avg/max/mdev = 0.019/0.183/33.761/1.441 ms, pipe 2 After patch : About 90% increase of throughput : lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 810442 lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 800992 And latencies are kept to minimal values during this load, even if network utilization is 90% higher : lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 19991ms rtt min/avg/max/mdev = 0.023/0.064/0.360/0.042 ms Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 4月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
Lookup key for tcp_md5_do_lookup() has to be taken from addr_sk, not sk (which can be the listener) Fixes: fd3a154a ("tcp: md5: get rid of tcp_v[46]_reqsk_md5_lookup()") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2015 2 次提交
-
-
由 Ian Morris 提交于
The ipv4 code uses a mixture of coding styles. In some instances check for non-NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: NIan Morris <ipm@chirality.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Morris 提交于
The ipv4 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: NIan Morris <ipm@chirality.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
After commit 1fb6f159 ("tcp: add tcp_conn_request"), tcp_syn_flood_action() is no longer used from IPv6. We can make it static, by moving it above tcp_conn_request() Signed-off-by: NEric Dumazet <edumazet@google.com> Reviewed-by: NOctavian Purdila <octavian.purdila@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2015 4 次提交
-
-
由 Eric Dumazet 提交于
ss should display ipv4 mapped request sockets like this : tcp SYN-RECV 0 0 ::ffff:192.168.0.1:8080 ::ffff:192.0.2.1:35261 and not like this : tcp SYN-RECV 0 0 192.168.0.1:8080 192.0.2.1:35261 We should init ireq->ireq_family based on listener sk_family, not the actual protocol carried by SYN packet. This means we can set ireq_family in inet_reqsk_alloc() Fixes: 3f66b083 ("inet: introduce ireq_family") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
With request socks convergence, we no longer need different lookup methods. A request socket can use generic lookup function. Add const qualifier to 2nd tcp_v[46]_md5_lookup() parameter. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Since request and established sockets now have same base, there is no need to pass two pointers to tcp_v4_md5_hash_skb() or tcp_v6_md5_hash_skb() Also add a const qualifier to their struct tcp_md5sig_key argument. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
It is guaranteed that both tcp_v4_rcv() and tcp_v6_rcv() run from rcu read locked sections : ip_local_deliver_finish() and ip6_input_finish() both use rcu_read_lock() Also align tcp_v6_inbound_md5_hash() on tcp_v4_inbound_md5_hash() by returning a boolean. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2015 4 次提交
-
-
由 Michal Kubeček 提交于
On s390x, gcc 4.8 compiles this part of tcp_v6_early_demux() struct dst_entry *dst = sk->sk_rx_dst; if (dst) dst = dst_check(dst, inet6_sk(sk)->rx_dst_cookie); to code reading sk->sk_rx_dst twice, once for the test and once for the argument of ip6_dst_check() (dst_check() is inline). This allows ip6_dst_check() to be called with null first argument, causing a crash. Protect sk->sk_rx_dst access by READ_ONCE() both in IPv4 and IPv6 TCP early demux code. Fixes: 41063e9d ("ipv4: Early TCP socket demux.") Fixes: c7109986 ("ipv6: Early TCP socket demux") Signed-off-by: NMichal Kubecek <mkubecek@suse.cz> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fan Du 提交于
Eric Hugne reported following error : I'm hitting this warning on latest net-next when i try to SSH into a machine with eth0 added to a bridge (but i think the problem is older than that) Steps to reproduce: node2 ~ # brctl addif br0 eth0 [ 223.758785] device eth0 entered promiscuous mode node2 ~ # ip link set br0 up [ 244.503614] br0: port 1(eth0) entered forwarding state [ 244.505108] br0: port 1(eth0) entered forwarding state node2 ~ # [ 251.160159] ------------[ cut here ]------------ [ 251.160831] WARNING: CPU: 0 PID: 3 at include/net/request_sock.h:102 tcp_v4_err+0x6b1/0x720() [ 251.162077] Modules linked in: [ 251.162496] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc3+ #18 [ 251.163334] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 251.164078] ffffffff81a8365c ffff880038a6ba18 ffffffff8162ace4 0000000000009898 [ 251.165084] 0000000000000000 ffff880038a6ba58 ffffffff8104da85 ffff88003fa437c0 [ 251.166195] ffff88003fa437c0 ffff88003fa74e00 ffff88003fa43bb8 ffff88003fad99a0 [ 251.167203] Call Trace: [ 251.167533] [<ffffffff8162ace4>] dump_stack+0x45/0x57 [ 251.168206] [<ffffffff8104da85>] warn_slowpath_common+0x85/0xc0 [ 251.169239] [<ffffffff8104db65>] warn_slowpath_null+0x15/0x20 [ 251.170271] [<ffffffff81559d51>] tcp_v4_err+0x6b1/0x720 [ 251.171408] [<ffffffff81630d03>] ? _raw_read_lock_irq+0x3/0x10 [ 251.172589] [<ffffffff81534e20>] ? inet_del_offload+0x40/0x40 [ 251.173366] [<ffffffff81569295>] icmp_socket_deliver+0x65/0xb0 [ 251.174134] [<ffffffff815693a2>] icmp_unreach+0xc2/0x280 [ 251.174820] [<ffffffff8156a82d>] icmp_rcv+0x2bd/0x3a0 [ 251.175473] [<ffffffff81534ea2>] ip_local_deliver_finish+0x82/0x1e0 [ 251.176282] [<ffffffff815354d8>] ip_local_deliver+0x88/0x90 [ 251.177004] [<ffffffff815350f0>] ip_rcv_finish+0xf0/0x310 [ 251.177693] [<ffffffff815357bc>] ip_rcv+0x2dc/0x390 [ 251.178336] [<ffffffff814f5da3>] __netif_receive_skb_core+0x713/0xa20 [ 251.179170] [<ffffffff814f7fca>] __netif_receive_skb+0x1a/0x80 [ 251.179922] [<ffffffff814f97d4>] process_backlog+0x94/0x120 [ 251.180639] [<ffffffff814f9612>] net_rx_action+0x1e2/0x310 [ 251.181356] [<ffffffff81051267>] __do_softirq+0xa7/0x290 [ 251.182046] [<ffffffff81051469>] run_ksoftirqd+0x19/0x30 [ 251.182726] [<ffffffff8106cc23>] smpboot_thread_fn+0x153/0x1d0 [ 251.183485] [<ffffffff8106cad0>] ? SyS_setgroups+0x130/0x130 [ 251.184228] [<ffffffff8106935e>] kthread+0xee/0x110 [ 251.184871] [<ffffffff81069270>] ? kthread_create_on_node+0x1b0/0x1b0 [ 251.185690] [<ffffffff81631108>] ret_from_fork+0x58/0x90 [ 251.186385] [<ffffffff81069270>] ? kthread_create_on_node+0x1b0/0x1b0 [ 251.187216] ---[ end trace c947fc7b24e42ea1 ]--- [ 259.542268] br0: port 1(eth0) entered forwarding state Remove the double calls to reqsk_put() [edumazet] : I got confused because reqsk_timer_handler() _has_ to call reqsk_put(req) after calling inet_csk_reqsk_queue_drop(), as the timer handler holds a reference on req. Signed-off-by: NFan Du <fan.du@intel.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NErik Hugne <erik.hugne@ericsson.com> Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_v4_err() can restrict lookups to ehash table, and not to listeners. Note this patch creates the infrastructure, but this means that ICMP messages for request sockets are ignored until complete conversion. New tcp_req_err() helper is exported so that we can use it in IPv6 in following patch. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This is a low hanging fruit, as we'll get rid of syn_wait_lock eventually. We hold syn_wait_lock for such small sections, that it makes no sense to use a read/write lock. A spin lock is simply faster. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2015 2 次提交
-
-
由 Eric Dumazet 提交于
One of the major issue for TCP is the SYNACK rtx handling, done by inet_csk_reqsk_queue_prune(), fired by the keepalive timer of a TCP_LISTEN socket. This function runs for awful long times, with socket lock held, meaning that other cpus needing this lock have to spin for hundred of ms. SYNACK are sent in huge bursts, likely to cause severe drops anyway. This model was OK 15 years ago when memory was very tight. We now can afford to have a timer per request sock. Timer invocations no longer need to lock the listener, and can be run from all cpus in parallel. With following patch increasing somaxconn width to 32 bits, I tested a listener with more than 4 million active request sockets, and a steady SYNFLOOD of ~200,000 SYN per second. Host was sending ~830,000 SYNACK per second. This is ~100 times more what we could achieve before this patch. Later, we will get rid of the listener hash and use ehash instead. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When request sock are put in ehash table, the whole notion of having a previous request to update dl_next is pointless. Also, following patch will get rid of big purge timer, so we want to delete a request sock without holding listener lock. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2015 2 次提交
-
-
由 Eric Dumazet 提交于
In order to be able to use sk_ehashfn() for request socks, we need to initialize their IPv6/IPv4 addresses. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Intent is to converge IPv4 & IPv6 inet_hash functions to factorize code. IPv4 sockets initialize sk_rcv_saddr and sk_v6_daddr in this patch, thanks to new sk_daddr_set() and sk_rcv_saddr_set() helpers. __inet6_hash can now use sk_ehashfn() instead of a private inet6_sk_ehashfn() and will simply use __inet_hash() in a following patch. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 3月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
When a request socket is created, we do not cache ip route dst entry, like for timewait sockets. Let's use sk_fullsock() helper. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2015 2 次提交
-
-
由 Eric Dumazet 提交于
Before inserting request socks into general hash table, fill their socket family. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
ireq->ir_num contains local port, use it. Also, get_openreq4() dumping listen_sk->refcnt makes litle sense. inet_diag_fill_req() can also use ireq->ir_num Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2015 1 次提交
-
-
由 Fan Du 提交于
As per RFC4821 7.3. Selecting Probe Size, a probe timer should be armed once probing has converged. Once this timer expired, probing again to take advantage of any path PMTU change. The recommended probing interval is 10 minutes per RFC1981. Probing interval could be sysctled by sysctl_tcp_probe_interval. Eric Dumazet suggested to implement pseudo timer based on 32bits jiffies tcp_time_stamp instead of using classic timer for such rare event. Signed-off-by: NFan Du <fan.du@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-